Error while uploading Complex Purchase Order through POXPOPDOI open interfa

Dear Gurus,
I am trying to upload Complex Purchase Orders in Oracle EBS R 12.1.2
The PO_INTERFACE_ERRORS table is populated with the following message:
STYLE_ID Error: Style (STYLE_ID = 103) with progress payments is not supported.
We have checked each and every setup. It is OK.
We tried to enter the complex POs from Front end screen, there is no issue. But I dont know why this error comes everytime we try to upload the POs throught the interface
We ran the Diagnostic Test. It is also OK.
Cannot figure out what is the issue. Please help.
Regards

Hi
I think some basis related configuartions to be done
Try like this and inform me
A cyclic job runs, which processes the messages seen in the SOST queue.
Are you sure it's not the frequency of the cyclic job, rather than the
number of messages in the queue, that you are observing? In messages
that are queued and before the cyclic job runs, "wait for comm. service"
is the normal status.
If you mean that there are always 4 items queued in SOST regardless of
the cyclic send job, then I have no ideas. I would have thought there
was no way to do that.
when the send job runs it just never
picks them up & sends them, while it picks up many others. The send job
is somehow blind to these; no error message occurs. In this case, I
'delete' them from the queue (in SOST) and then 'undelete' (drop down
menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
actually get picked up & sent when the next cyclic send job executes.
Regards
Pavan

Similar Messages

  • Error while creating a Purchase Order

    Hi Friends,
    I am new to SAP MM. I am getting a problem while creating a purchase order. I created Purchase Info Record, Source List, but while creating Purchase Order, price is not picking from the purchase order. I am getting an error i.e. Net Value must be greater than 0. I checked all the settings, but getting same error.
    Could you please solve this

    Hi,
    Give some price at the item level for the item in the PO.
    And check the Pricing procedure in PO
    Hope it helps you.
    Thanks.

  • WebDynpro Error while creating a Purchase Order in SRM 7.0

    Hello Friends,
    I need help.
    We are on SRM 7.0 with support pack 8.0 and  we are getting the below error wile clicking on Shopping cart or Purchase Order link in Portal.
    Any idea on how to resolve this error.
    Thanks
    Jyothi.
    http://sapsrm.erpcx.com:8000/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    ASSERTION_FAILED
    The ASSERT condition was violated.
    Method: ADD_EVENT_TO_QUEUE of program CL_FPM========================CP
    Method: IF_FPM~RAISE_EVENT of program CL_FPM========================CP
    Method: SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
    Method: IF_COMPONENTCONTROLLER~SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
    Method: RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
    Method: IF_V_PRSEL~RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
    Method: WDDOMODIFYVIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
    Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
    Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP

    Here is what I see:
    Error analysis                                                                                |
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "ASSERTION_FAILED" " "
    "CL_FPM========================CP" or "CL_FPM========================CM004"
    "ADD_EVENT_TO_QUEUE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    |

  • Error, While updating a purchase order

    Hi All,
    I am getting following error massage while updating a existing PO:
    " Cannot Insert the value null into column docentry, Table db name.dbo. POR4; column does not allow nulls. Insert Fail."
    We have upto 886 items in the PO and the summary type is " No summary". Even when i treid to change the summary type to "By items", the system is till throwing the same error message. Please let me knwo the cause of this error and how to rectify this??
    Thanks in advance,
    Joseph

    Dear Joseph,
    Please try the followings in a testing database and check the results:
    1. if you give full authorisation to this specific user, will the error persist when adding the rows?
    2. if adding new rows at the end of the purchase order will it be successful?
    3. if you duplicate the sales order then add the new rows, will the error occur?
    4. will the error persist if you upgrade the client to the latest patch?
    5. please check the note 1139134 and 1249795.
    Regards,
    Varun
    SAP Business One Forum Team

  • Error while save framework purchase order.

    dear all
    i am working SAP R/3 4.7 ides while  creating framework po, i input all the data field correctly , but when i am going to save the purchase order, it given the error Massages  " Indicator for invoice receipt used not allowed
    Message no. MEPO026"
    then i tell me how i save  the po.  i request to all the experts

    Dear,
    What account assignment you are using?
    Use account assignment category as K  and item category as B  Also do not enter material ID.
    Now try.
    Regards
    Utsav

  • Budget exceeded error while deleting CAPEX Purchase order

    Hello All,
    We've created purchase order with WBS element for some materials & account assgn P. This however needs to now be deleted as there has been mistake in th PO.
    But while trying to delete the PO the system gives an error message " WBS element XXXX.XXX.. budget exceeded"
    I've tried deleting the PR first and then the PO which works fine, BUT we are not able to create another PO as the error of Budget exceeded is seen here as well.
    Please advice on how to delete the PO.
    Regards,
    ManojR

    Hi,
    Please read note 178837 which gives information on how to check the real assigned value.
    I would like you to run report ZKAOIDE0 from Note 100409 to remove
    the data which is not linked to a valid purchase order or requisition.
    After running the report then run transaction CJEN to reconstruct the
    project.  Then run report RKANBU01 after completing the reconstruction.
    The problem is probably that  a purchase order has the deletion indicator set but it still appears in table COOI.
    I hope this helps!.
    Best Regards,
    Arminda Jack

  • Error while creation of PUrchase order by using BAPI.

    Hi All,
       We are creating a purchase order thru BAPI ("BAPI_POEC_CREATE") and we are passing the following parameters ( I_PO_HEADER , I_PO_ITEMS , I_PO_ACCASS , I_PO_PARTNER and I_PO_ORGDATA)  to the bapi and after processing  we are getting the following error and Abend messages.
    Messages:
    1) Enter at least one item or one limit ( we have added line items in I_PO_ITEMS structure).
    2) Incorrect interface data for set 78 in method C.
    3) Interface data contains errors.
    Can anyone help me in fixing these errors inorder to proceed further.
    Regards
    Dharmaraju

    Hi there,
    Did you manage to sort this problem ?
    If not let me know
    I am using the same and know how to overcome
    Thanks
    Turlock
    T

  • Errors while making a purchase order in Adventure Builder 1.0.4

    Hi,
    I instaled J2EE 1.4 SDK (linux) : j2eesdk-1_4_03-linux.bin thar includes Sun
    Java System Application Server PE 8.2 and Java Adventure Builder 1.0.4.
    After the "build" and "deploy" of the Adventure, following the steps
    presented in Install.html, i did one adventure purchase via browser. To
    the client (browser) all goes ok, it gets the order ID, it is able to see
    the adventure details and the order has the correct status (SUBMITTED TO
    SUPPLIER and, afterwards, COMPLETED). But when i check the server logs
    (SUNWappserver/domains/domain1/logs/server.log) i get the following errors:
    [#|2006-04-11T16:48:08.051+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=33;|EJB5071:
    Some remote or transactional roll back exception occurred
    com.sun.jdo.api.persistence.support.JDODataStoreException: JDO76406:
    Concurrent access exception: object to update has been updated or deleted by
    another transaction.
    FailedObjectArray:
    [com.sun.j2ee.blueprints.processmanager.manager.ejb.ManagerBean_1935673060_JDOState@15d65d]
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.throwJDOConcurrentAccessException(SQLStoreManager.java:626)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.executeUpdate(SQLStoreManager.java:185)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.execute(SQLStoreManager.java:106)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStateManager.updatePersistent(SQLStateManager.java:893)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushToDataStore(PersistenceManagerImpl.java:1477)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushTxCache(PersistenceManagerImpl.java:1404)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.java:1338)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.notifyBeforeCompletion(TransactionImpl.java:1130)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.commitBefore(TransactionImpl.java:759)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.beforeCompletion(TransactionImpl.java:650)
    at
    com.sun.ejb.containers.ContainerSynchronization.beforeCompletion(ContainerSynchronization.java:137)
    at
    com.sun.jts.jta.SynchronizationImpl.before_completion(SynchronizationImpl.java:56)
    at
    com.sun.jts.CosTransactions.RegisteredSyncs.distributeBefore(RegisteredSyncs.java:120)
    at
    com.sun.jts.CosTransactions.TopCoordinator.beforeCompletion(TopCoordinator.java:2491)
    at
    com.sun.jts.CosTransactions.CoordinatorTerm.commit(CoordinatorTerm.java:240)
    at
    com.sun.jts.CosTransactions.TerminatorImpl.commit(TerminatorImpl.java:211)
    at com.sun.jts.CosTransactions.CurrentImpl.commit(CurrentImpl.java:585)
    at
    com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:273)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
    at
    com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
    at
    com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
    at $Proxy92.afterDelivery(Unknown Source)
    at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
    at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    |#]
    [#|2006-04-11T16:48:08.067+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|MDB00037:
    [OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
    [javax.ejb.EJBException: Transaction aborted; nested exception is:
    javax.transaction.RollbackException]|#]
    [#|2006-04-11T16:48:08.067+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|javax.ejb.EJBException
    javax.ejb.EJBException: Transaction aborted; nested exception is:
    javax.transaction.RollbackException
    javax.transaction.RollbackException
    at
    com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:275)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
    at
    com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
    at
    com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
    at $Proxy92.afterDelivery(Unknown Source)
    at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
    at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    javax.ejb.EJBException: Transaction aborted; nested exception is:
    javax.transaction.RollbackException
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2737)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
    at
    com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
    at
    com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
    at $Proxy92.afterDelivery(Unknown Source)
    at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
    at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    |#]
    [#|2006-04-11T16:48:08.091+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=33;|EJB5071:
    Some remote or transactional roll back exception occurred
    com.sun.jdo.api.persistence.support.JDODataStoreException: JDO76406:
    Concurrent access exception: object to update has been updated or deleted by
    another transaction.
    FailedObjectArray:
    [com.sun.j2ee.blueprints.processmanager.manager.ejb.ManagerBean_1935673060_JDOState@19a7420]
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.throwJDOConcurrentAccessException(SQLStoreManager.java:626)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.executeUpdate(SQLStoreManager.java:185)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.execute(SQLStoreManager.java:106)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.SQLStateManager.updatePersistent(SQLStateManager.java:893)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushToDataStore(PersistenceManagerImpl.java:1477)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushTxCache(PersistenceManagerImpl.java:1404)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.java:1338)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.notifyBeforeCompletion(TransactionImpl.java:1130)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.commitBefore(TransactionImpl.java:759)
    at
    com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.beforeCompletion(TransactionImpl.java:650)
    at
    com.sun.ejb.containers.ContainerSynchronization.beforeCompletion(ContainerSynchronization.java:137)
    at
    com.sun.jts.jta.SynchronizationImpl.before_completion(SynchronizationImpl.java:56)
    at
    com.sun.jts.CosTransactions.RegisteredSyncs.distributeBefore(RegisteredSyncs.java:120)
    at
    com.sun.jts.CosTransactions.TopCoordinator.beforeCompletion(TopCoordinator.java:2491)
    at
    com.sun.jts.CosTransactions.CoordinatorTerm.commit(CoordinatorTerm.java:240)
    at
    com.sun.jts.CosTransactions.TerminatorImpl.commit(TerminatorImpl.java:211)
    at com.sun.jts.CosTransactions.CurrentImpl.commit(CurrentImpl.java:585)
    at
    com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:273)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
    at
    com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
    at
    com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
    at $Proxy92.afterDelivery(Unknown Source)
    at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
    at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    |#]
    [#|2006-04-11T16:48:08.096+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|MDB00037:
    [OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
    [javax.ejb.EJBException: Transaction aborted; nested exception is:
    javax.transaction.RollbackException]|#]
    [#|2006-04-11T16:48:08.096+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|javax.ejb.EJBException
    javax.ejb.EJBException: Transaction aborted; nested exception is:
    javax.transaction.RollbackException
    javax.transaction.RollbackException
    at
    com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:275)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
    at
    com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
    at
    com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
    at $Proxy92.afterDelivery(Unknown Source)
    at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
    at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    javax.ejb.EJBException: Transaction aborted; nested exception is:
    javax.transaction.RollbackException
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2737)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
    at
    com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
    at
    com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
    at $Proxy92.afterDelivery(Unknown Source)
    at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
    at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    |#]
    [#|2006-04-11T16:48:12.449+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|Initializaing
    OtMessageHandler|#]
    [#|2006-04-11T16:48:12.452+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|
    Initializaing OtMessageHandler|#]
    [#|2006-04-11T16:48:12.452+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|
    OtMessageHandler:[ns0:getOrderDetails: null]|#]
    [#|2006-04-11T16:48:12.580+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|
    OtMessageHandler: handleResponse|#]
    [#|2006-04-11T16:50:08.045+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.transaction|_ThreadID=33;|JTS5031:
    Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
    Maybe] on Resource [commit] operation.|#]
    [#|2006-04-11T16:50:08.046+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|MDB00037:
    [OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
    [javax.ejb.EJBException: Unable to complete container-managed transaction.;
    nested exception is: javax.transaction.SystemException:
    org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
    0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
    0x0 minor code: 0 completed: No]|#]
    [#|2006-04-11T16:50:08.046+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|javax.ejb.EJBException
    javax.ejb.EJBException: Unable to complete container-managed transaction.;
    nested exception is: javax.transaction.SystemException:
    org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
    0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
    0x0 minor code: 0 completed: No
    javax.transaction.SystemException: org.omg.CORBA.INTERNAL: JTS5031:
    Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
    Maybe] on Resource [commit] operation. vmcid: 0x0 minor code: 0 completed:
    No
    at
    com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:285)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
    at
    com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
    at
    com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
    at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    javax.ejb.EJBException: Unable to complete container-managed transaction.;
    nested exception is: javax.transaction.SystemException:
    org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
    0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
    0x0 minor code: 0 completed: No
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2742)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
    at
    com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
    at
    com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
    at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    |#]
    [#|2006-04-11T16:50:13.059+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.transaction|_ThreadID=34;|JTS5031:
    Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
    Maybe] on Resource [commit] operation.|#]
    [#|2006-04-11T16:50:13.061+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=34;|MDB00037:
    [OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
    [javax.ejb.EJBException: Unable to complete container-managed transaction.;
    nested exception is: javax.transaction.SystemException:
    org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
    0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
    0x0 minor code: 0 completed: No]|#]
    [#|2006-04-11T16:50:13.061+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=34;|javax.ejb.EJBException
    javax.ejb.EJBException: Unable to complete container-managed transaction.;
    nested exception is: javax.transaction.SystemException:
    org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
    0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
    0x0 minor code: 0 completed: No
    javax.transaction.SystemException: org.omg.CORBA.INTERNAL: JTS5031:
    Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
    Maybe] on Resource [commit] operation. vmcid: 0x0 minor code: 0 completed:
    No
    at
    com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:285)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
    at
    com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
    at
    com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
    at
    com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
    at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    javax.ejb.EJBException: Unable to complete container-managed transaction.;
    nested exception is: javax.transaction.SystemException:
    org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
    0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
    0x0 minor code: 0 completed: No
    at
    com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2742)
    at
    com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
    at
    com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
    at
    com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
    at
    com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
    at
    com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
    at
    com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
    at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
    at
    com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
    Source)
    |#]
    [#|2006-04-11T16:50:13.062+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=34;|EJB5119:Expunging
    timer ['4@@1144682418760@@server@@domain1' 'TimedObject =
    WorkFlowManagerBean' 'Application = OPC' 'BEING_DELIVERED' 'PERIODIC'
    'Container ID = 75023570086854669' 'Tue Apr 11 16:49:08 WEST 2006' '60000' ]
    after [2] failed deliveries|#]
    So, when i make hundreds of requests i have an obvious problem - a gigantic
    log! I did a little benchmark using 10 clients making burst requests and
    after a minute or so the Application Server simply stops replying to
    requests due to the gigantic number of errors.
    Do you have any suggestion of what the problem may be? I already tried the
    Windows version and the same thing happens.
    thank you in advance,
    Jo�o Bento

    Could you please run your application again, enabling the logging of the SQL statements. To enable, add the following to domain.xml:
    <log-service alarms="false" file="${com.sun.aas.instanceRoot}/logs/server.log" log-rotation-limit-in-bytes="2000000" log-rotation-timelimit-in-minutes="0" log-to-console="false" retain-error-statistics-for-hours="5" use-system-logging="false">
    <module-log-levels admin="INFO" classloader="INFO" cmp="INFO" cmp-container="INFO" configuration="INFO" connector="INFO" corba="INFO" deployment="INFO" ejb-container="INFO" group-management-service="INFO" javamail="INFO" jaxr="INFO" jaxrpc="INFO" jdo="INFO" jms="INFO" jta="INFO" jts="INFO" management-event="INFO" mdb-container="INFO" naming="INFO" node-agent="INFO" resource-adapter="INFO" root="INFO" saaj="INFO" security="INFO" self-management="INFO" server="INFO" synchronization="INFO" util="INFO" verifier="INFO" web-container="INFO">
    <property name="javax.enterprise.resource.jdo.sqlstore.sql" value="FINEST"/>
    </module-log-levels>
    </log-service>

  • Error while updating the sales order through Process Order API

    Hi,
    Please any one will help plz.
    I am updating the promise_date through oe_order_pub.process_order(Process Order API) i am getting the following error.
    FND_AS_UNEXPECTED_ERROR N PKG_NAME OE_Order_Cache N PROCEDURE_NAME get_tax_calculation_flag N ERROR_TEXT ORA-01403:no data found
    Please any one will help plz
    Below is my code.
    Declare      
    l_archive_file_name VARCHAR2(1000);
    l_shipment_exists NUMBER:=0;
    l_header_id NUMBER;
    l_line_id NUMBER;
    p_header_rec Oe_Order_Pub.Header_Rec_Type;
    l_line_tbl oe_order_pub.line_tbl_type := oe_order_pub.g_miss_line_tbl;
    l_header_rec OE_ORDER_PUB.Header_Rec_Type;
    l_header_val_out_rec OE_ORDER_PUB.Header_Val_Rec_Type;
    l_header_adj_out_tbl OE_Order_PUB.Header_Adj_Tbl_Type;
    l_header_adj_val_out_tbl OE_Order_PUB.Header_Adj_Val_Tbl_Type;
    l_header_price_att_out_tbl OE_ORDER_PUB.Header_Price_Att_Tbl_Type;
    l_header_adj_att_out_tbl OE_ORDER_PUB.Header_Adj_Att_Tbl_Type;
    l_header_adj_assoc_out_tbl OE_ORDER_PUB.Header_Adj_Assoc_Tbl_Type;
    l_header_scredit_out_tbl OE_Order_PUB.Header_Scredit_Tbl_Type;
    l_header_scredit_val_out_tbl OE_Order_PUB.Header_Scredit_Val_Tbl_Type;
    l_line_rec OE_ORDER_PUB.line_rec_type;
    l_line_out_tbl OE_ORDER_PUB.Line_Tbl_Type;
    l_line_val_out_tbl OE_ORDER_PUB.Line_Val_Tbl_Type;
    l_line_adj_out_tbl OE_ORDER_PUB.Line_Adj_Tbl_Type;
    l_line_adj_val_out_tbl OE_ORDER_PUB.Line_Adj_Val_Tbl_Type;
    l_line_price_att_out_tbl OE_ORDER_PUB.Line_Price_Att_Tbl_Type;
    l_line_adj_att_out_tbl OE_ORDER_PUB.Line_Adj_Att_Tbl_Type;
    l_line_adj_assoc_out_tbl OE_ORDER_PUB.Line_Adj_Assoc_Tbl_Type;
    l_line_scredit_out_tbl OE_Order_PUB.Line_Scredit_Tbl_Type;
    l_line_scredit_val_out_tbl OE_Order_PUB.Line_Scredit_Val_Tbl_Type;
    l_lot_serial_out_tbl OE_Order_PUB.Lot_Serial_Tbl_Type;
    l_lot_serial_val_out_tbl OE_Order_PUB.Lot_Serial_Val_Tbl_Type;
    l_action_request_out_tbl OE_Order_PUB.Request_Tbl_Type;
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(2000);
    l_return_status VARCHAR2(1);
    l_index NUMBER;
    l_rows_processed NUMBER:=0;
    l_line_mawb VARCHAR2(240);
    l_line_hawb VARCHAR2(240);
    l_line_flight_num VARCHAR2(240);
    l_org_id NUMBER :=143;--FND_GLOBAL.ORG_ID;
    l_resp_id NUMBER:=FND_GLOBAL.RESP_ID;
    l_resp_appl_id NUMBER:=FND_GLOBAL.RESP_APPL_ID;
    l_user_id number := FND_GLOBAL.USER_ID;
    l_promise_date date;
    BEGIN
    SELECT ol.org_id, oh.header_id, ol.line_id,ol.promise_date
    INTO l_org_id, l_header_id, l_line_id,l_promise_date
    FROM apps.oe_order_headers_all oh, apps.oe_order_lines_all ol
    WHERE ol.header_id=oh.header_id
    AND ol.line_id =1319526; --&line_id
    -- apps.fnd_global.apps_initialize(&l_USER_ID,&l_resp_id,&l_resp_appl_id);
    apps.fnd_global.apps_initialize(67778,51017,660);
    p_header_rec := OE_ORDER_PUB.G_MISS_HEADER_REC;
    p_header_rec.header_id :=835035;-- l_header_id;
    p_header_rec.operation := OE_GLOBALS.G_OPR_UPDATE;
    l_line_tbl := oe_order_pub.g_miss_line_tbl;
    -------------------------Line Record -------------------------------
    l_line_tbl(1) := oe_order_pub.g_miss_line_rec;
    l_line_tbl(1).header_id := 835035;
    l_line_tbl(1).line_id := 1319526;
    l_line_tbl(1).promise_date := sysdate;
    l_line_tbl(1).operation := oe_globals.g_opr_update;
    BEGIN
    apps.oe_order_pub.process_order
    (p_api_version_number => 1.0
    ,p_init_msg_list => fnd_api.g_true
    ,p_return_values => fnd_api.g_true
    ,x_return_status => l_return_status
    ,x_msg_count => l_msg_count
    ,x_msg_data => l_msg_data
    ,p_header_rec => p_header_rec
    ,p_line_tbl => l_line_tbl
    -- out variables
    ,x_header_rec => l_header_rec
    ,x_header_val_rec => l_header_val_out_rec
    ,x_header_adj_tbl => l_header_adj_out_tbl
    ,x_header_adj_val_tbl => l_header_adj_val_out_tbl
    ,x_header_price_att_tbl => l_header_price_att_out_tbl
    ,x_header_adj_att_tbl => l_header_adj_att_out_tbl
    ,x_header_adj_assoc_tbl => l_header_adj_assoc_out_tbl
    ,x_header_scredit_tbl => l_header_scredit_out_tbl
    ,x_header_scredit_val_tbl => l_header_scredit_val_out_tbl
    ,x_line_tbl => l_line_out_tbl
    ,x_line_val_tbl => l_line_val_out_tbl
    ,x_line_adj_tbl => l_line_adj_out_tbl
    ,x_line_adj_val_tbl => l_line_adj_val_out_tbl
    ,x_line_price_att_tbl => l_line_price_att_out_tbl
    ,x_line_adj_att_tbl => l_line_adj_att_out_tbl
    ,x_line_adj_assoc_tbl => l_line_adj_assoc_out_tbl
    ,x_line_scredit_tbl => l_line_scredit_out_tbl
    ,x_line_scredit_val_tbl => l_line_scredit_val_out_tbl
    ,x_lot_serial_tbl => l_lot_serial_out_tbl
    ,x_lot_serial_val_tbl => l_lot_serial_val_out_tbl
    ,x_action_request_tbl => l_action_request_out_tbl
    --dbms_output.put_line('l_msg_data-->' ||l_msg_data ||' l_return_status --> ' ||l_return_status);  
    END;
    commit;
    END;
    Regards,
    Sangu

    Hi Sangu,
    See if the following notes help you:
    Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
    Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
    Thanks &
    Best Regards,

  • Get "Error in Net Price Calculation" error while creating a Purchase Order

    I am getting a error when i try to create a PO. Says "Error in Net Price Calculation item 00010(Please correct)"
    I have defined conditon records with the price for the material  and have also created info record.However the price in the info record (including currency i.e USDN is different than the one defined in the conditon records currency is USD).
    However the price is different from the one defined in info record and in material master.
    Where is it picking the price from also is there any way to edit the price in material master or info record ?
    Also when i view the condition records by using Tcode MEK1 i get the following error
    "Access Pricing Purchasing Z00q 20 contains no fields"
    I know Z001 is the access sequence
    Can any one tell me wht is this error message about ?
    Edited by: Dspsac on Jan 29, 2008 4:31 AM

    how can u maintain the condition record as well as info record for a vendor -material in the same time frame
    it is not possibe
    as info record is also 1 of the condition table
    if u have maintained the info record then system is going to fetch the data from there but point top notice is it depends on the validity of record
    system fetch the price from info record
    and the currency used is fom vendor master

  • Error while uploading BITMAP image in SAP through SE78.

    Hello all,
    I am getting below error while uploading image into SAP through SE78.
    'Bitmap file: No color table available (True Color, Bitcount 32)'.
    I have tried searching for solution and got some help from below reply from a thread:
    You may do these options:
    1. Lower the resolution of the image
    2. Lower the file size of the image
    Regards,
    Reymar
    I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
    Thanks in Advance.
    - Jayant Sahu.

    Hi Daniel,
    First of all, if you dont mind, start a new thread for your question please.
    Anyways, answer to your question is --
    You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
    This way, your problem would be resolved.
    Thanks.
    Kumar Saurav.

  • Error while uploading file in BPS

    Hi all,
    I am getting an error while uploading file to BPS through web interface
    I get a red stop button with error message : error while calling up RFC.
    when i double click the red stop button, i get no long text but the error message I get is UPC 202
    please advice me to resolve this issue.
    many thanks in advance,
    Ravi

    The informations are really not much to have an idea about the problem.
    The problem can be located in the fm that calls the file because is trying to search the file on a system where there are some kind of problems in the communication between the systems involved to read and pass the file. Did u map the file name with logical filenames ? Very strange problem. Can you browse in the server where the file is located . Is it on your pc ?
    Or, there is some problem in the datas provided, but this problem should arise more when you save than when you just press to load.
    With this kind of imformations is very hard to have an idea. You need to debug to see what s going on
    Regards

  • Automaticf creation of purchase order through pr

    Dear Consultants,
    system is not creating automatic  purchase order. in me59n i am getting the following error
    Requisition could not be converted
    i have done the following setting for automatic creation of purchase order
    1. in materil master record i have checked auto po.
    2. in vendor master record i have checked automatic purchase order
    3. i have created purchase info record with the combination of material vendor purchase organization.
    4. in source list i have fixed the vendor in me01
    5. in source determination under define regular vendor i have checked the box against the required plant.
    kindly let me know what all other configurations are required for creating automatic purchase order through purchase requisition
    Regards/ Siri

    Hi
    Is this purchase requisition created during MRP run??
    If yes then have you marked the sourcelist record for this vendor as MRP relevant??
    If the purchase requisition is generated manually then whether the source of supply was assigned in the PR??
    In ME59N, the PR would be converted to PO if the PR has the assigned source of supply.
    Regards
    Prasad

  • Error while uploading MT940 format

    Hi Experts,
    While uploading MT940 format file through t.code ff_5 following error come:
    External transaction N155 + and N475-  is not found.
    What these external transactions stand for and what should be the posting rule and interpretation alogrith for the same?
    I maintain these two external transaction without posting rule but it didn't solve my problem.
    Thanks & Regards ,
    Swati

    Hi,
    Now coming to your issues
    1) When the statement was uploaded first time, what options did you select in output control? If you select posting log etc you will get exact status of the statement uploaded.  Please check in FEBA the status of this statement uploaded.
    Also recheck your customising with reference to posting rule etc.
    2) About the second statement of yours, I understand that you are now receiving an error FB 771 on trying to upload same statement again via FF_5, this is correct as one statement can be uploaded only once.
    Check the below note
    "15759 Deleting account statements and check deposit lists"
    Report RFEBKA96 is an utility program meant for using in test systems and in emergency situations. In your case where you have confirmed that there are no posting happened for this statement uploaded(Please recheck and ensure the same), you can go ahead and use this program but has to be used in caution. Please review the above note which has more details.
    Kind Regards
    Soumya

  • Error While Uploading GL Master Data in LSMW

    Hello Experts,
    I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
    Your help would be highly appreciated.
    Regards
    Muhammad Yousuf Ali
    SAP FI Consultant

    Hi,
    first can you pls check your Hierarchy mode setting in FS00 -  before executing Batch input session -
    Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
    then Now Run fresh LSMW - your issue will resolve
    Mahesh

Maybe you are looking for

  • Workaround: 16-bit installers in Vista

    If some of you have some legacy programs you like to use that used to work in XP but don't install in Vista, here's a tip.  The installer for your program may be 16-bit and Vista is an all 32-bit OS.  There are many programs that have 16-bit installe

  • Troubleshooting mysql on tomcat

    Hi, I'm new to java, so we're doing some examples. we are using creator2 to develop and try examples form page. I just did database access on local machine (to mysql) with no problem but when y try to run it on a sunfire v100 server with solaris10 no

  • French Canadian (3F) extended language support  with RFC libraries.

    Hi All, I have a customer that is using the extended language French Canadian (3F) they have metadata in this language that is different to French (F). There is no language pack for this so I cannot use 3F as the language property when opening a conn

  • Loading point optimization

    Hi, My client wants to schedule  the loading point and loading time automatically. For example, if the loading time is 4 hours and if you create two sales orders continuously, then it should propose the loading time with the gap of 4 hours during del

  • How to replication on different OS

    two machine use Different daemon port (linux-64 use 53388 win-32 use 53384) how to create replication? now, i exec this sql: Command> insert into repl.t1 values(1,'a1'); Warning 8170: Receipt or commit acknowledgement not returned in the specified ti