Error with Business systems

Hi Gurus,
I created the SC, for that SC i created the TS,BS.
I finished all things in IR, tested it, working fine.
In ID which 'Assisgning Business system' i am not get any BS in the list.
will u plz guide me in this.
Thanks & Regards,
Lakshmi..

lashmi,
you need to import the business system from SLD into ID.Right click on Buiness System in ID it will get assign business system option from that select next unitl you slect BS and choose the BS you created in SLD and import it.

Similar Messages

Communication error with external system ( VERTEX )

Hi Folks,
While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document.
Please help me out here.
Answers will be appreciated and rewared.
Regards,
Ram.

Hi,
check this below thread
Communication error with the external tax system (VERTEX_MS0018)
OR
Remove V from the Extrernal System at the location IMG->financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->External Tax Calculation->Activate External Tax Calculation
Reg,
JJ
Edited by: Jagsap on Mar 5, 2010 1:15 PM

Problem with business systems in SLD

Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
Ahmad

Hey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad

XI - Error Assigning business system services for A2A configuration

Hello!
I am working with the integration scenario plan_driven_procurement_supplierenablement and the integration scenario configurator. Performing the second step - assign services following error occurs:
An error occurred when accessing the SLD server
MESSAGE ID: com.sap.lcr.api.cimclient.LcrException (serialized)
com.sap.lcr.api.cimclient.LcrException: User credentials are invalid or user is denied access
     at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)
     at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)
     at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:198)
     at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146)
     at com.sap.lcr.api.cimclient.CIMOMClient.getInstance(CIMOMClient.java:572)
     at com.sap.lcr.api.cimclient.CIMClient.getInstance(CIMClient.java:1250)
     at com.sap.aii.ib.server.sldaccess.SLDReader.getCIMInstance(SLDReader.java:224)
     at com.sap.aii.ib.server.sldquery.SLDQuery.readSLDElementAssociatorKeyList(SLDQuery.java:941)
     at com.sap.aii.ib.server.sldquery.SLDQuery.selectSLDElementList(SLDQuery.java:656)
     at com.sap.aii.ib.server.sldquery.SLDCache.actualize(SLDCache.java:34)...
Could you please tell me which user is meant? Where can I change it?
Thanks a lot - Barbara

Name: Plan_Driven_Procurement_SupplierEnablement
Namespace: http://sap.com/xi/SRM/Basis/Global
Software Component Version: SAP SRM SERVER 5.5
The problem is the connection between the Integration Scenarion Configurator (Integration Directory) and the central SLD which means that the XI is not on the SLD host.
When I try to assign the business systems, which I created in the SLD, I have to assign a service (business system) to every single role. When I am trying to add a line and display the list of permitted values a new box opens in order to select the service.
Selecting the product, i.e. SAP R/3 the pop up with the error appears.
Do you need more information please let me know which!

SXI_CACHE error "ABAP business system = 7.10 and therefore has no cache"

Hello Community,
I'm running an ERP System with Basis 7.40 SP5 and a PI 7.4 SP6
When I try to make a Cache synchronization is transaction SXI_CACHE, I get the following error:
Thrown:
com.sap.aii.ib.core.abapcache.CacheRefreshException: Receiver <SID>_200_ERP is not an ABAP business system >= 7.10 and therefore has no cache
at com.sap.aii.ibdir.server.abapcache.content.CacheForBackend.addContent(CacheForBackend.java:115)
at com.sap.aii.ibdir.server.abapcache.content.CacheForBackend.addContent(CacheForBackend.java:106)
at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:637)
at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:280)
at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:161)
at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.setXmlDataAndBufferSize(CacheRefreshSession.java:172)
But the System is in the SLD in Version 7.40 and the Bussines System is assigned correctly.
It's seems to be a bug in the validation.
Does anyone knows a workaround for this situation?
Best regards
Bastian Gschrey

Hi Tomasz,
I solved the Problem by cleaning the SLD Cache in the Integration Builder.
This worked for me for 2 Systems.
For the third system, that had the problem, the solution was to delete it from SLD, cleaning SLD Cache in Integration Builder, re-register(rz70) the system in SLD and assign the Business System. After that the problem was solved in all systems.
Best regards
Bastian

ERROR with Source System in BI

Hi,
I replicated the datasources from DEV to BI. They replicated just fine. I can even see it in BI. I then tried to activate the datasource (i created the datasource from a view ) but it gave me a run time error :
ASSIGN_LENGTH_0 Short dump has not been completely restored..too big.
I then tried to go into the source system and tried to activate that and it said:
Source System DEV300 is inactive
BI Unknown in system
BI IDoc type ZSBC019 is not the same as source system IDoc type
The following errors occured in the source syaytem:
Entry in inbound table not found
Entry in outbound table not found
Result of the destination check: No authorization to logon as trusted system
What could have went wrong?
Thanks

Did you try activating the source system in RSA1 ..right click and choose active.
if this doesnt work then you might want to check the inbound and outbound entries in we20 transaction code for the source system. If you have authorization. Or you need to check with your BASIS to set that up for you.

Error with Business area and profit center

Hello Guru's,
I have an issue when posting the stock through t-code MB1C and 521 movement type. We have assigned business area and profit centers for plants as below:
For Plant 1000,
Business Area:       1100
Profit center:           1100
And For Plant 2000,
Business Area:        1200
Profit center:             1200
But when I am assigning plant 2000, and assigning business area and profit center as 1200 respectively. System by default is picking as 1100 with a warning message.
Please help this resolving this issue, I want the system to take the correct assigned BA and Profit center.
Regards,
Varun Siddharth

Hi Varun,
One of the possible ways is, to assign a business area to the cobination of Plant and Division in OMJ7 (Assignment is possible for other combinations as well). Later you can define a substitution rule so that, a profit center is substituted to the combination of Plant and Business Area.
Hope it helps you.
Regards,
Ravi Kumar

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Error with "File System" destination only in a Publication

Hello,
I am able to have individual reports run & refresh to a File System destination, but when I attempt to have the same reports, as part of a Publication, save to a File System destination, I receive this error in the log:
ERROR PublishingService:HandlerPool-32 BusinessObjects_PublicationAdminLog_Instance_15516 - Publication ID # 15516 - Distribution to destination CrystalEnterprise.DiskUnmanaged ... destination DLL disabled. [http://CrystalEnterprise.DiskUnmanaged ([1]/1])]: [ (FBE60013)
If I use Email instead of File System in this Publication, the Publication runs fine, no issues.
Thanks for any help.

Let's start with proper terminology
You're not sending report to unmanaged disk, you're scheduling it there.
When you use publication - you're publising it there.
2 different worflows, that use 2 different servers. Each server has to be configured for this functionality.
It is done in CMC in servers properties.
Admin guide will give you information on what each server in BO architecture is responcible for and what are the parameters that needs to be set for various workflows.

Error with Logical System - Long SID - SOLAR01

Hello,
We are using Solman Ehp1, stack 25. We have a problem in using Long SID (same SID) in Solar01
We are creating a new system in the landscape of a project. There was a copy of production system (called PCA) into a sandbox system keeping the same SID for both system PCA
We define a new product system in SMSY and we use a new long SID so that it is called PCAP. This new system recovered the logical system definition for each client which is the same for both PCA and PCAP system. Then we create RFCs for the new PCAP long id, no problem.
Finally we add the new system to the Logical Component Z_ERP with a new role 2 Sandbox system.
We went to the project SOLAR_PROJECT_ADMIN and assign the new system role 2 so that is available to use it in some test.
We go to transaction SOLAR01, switch to the new system role 2, and try to execute any transaction in the new server, it is saying that there is no logical system assigned to PCAP.... which is true, since the logical system is called PCAxxxxx.
Can you help us with that?
Regards
Esteban Hartzstein

Hello Fabricius,
What I did is add the new PCAP system to the current Logical Component with the new system role Sandbox test so that they can perfomed some tests on that role. This system is a complete copy of the original PCA system, so internally everything is PCAP, and since I cannot have same SID in SMSY, I created as PCAP. And that causes a problem with the Logical System definition.
The actual error message is
smsy_ppms_api044
This error message was reported in another post back in 2009
LIink: Error getting RFC destination for logical system SMD XXX
Any ideas?? Help required
Regards
Esteban
Edited by: Esteban Hartzstein on Oct 27, 2011 10:00 AM

Error with source system

hi alll,
I am working with BI.In that i am getting the following error while scheduling
"Job terminated in source system --> Request set to red"
no other error messages are displayed.any one know the reason why i am getting like this plz post reply..
thanks in advance
Naga

Hi,
The job has been been terminated in the source system.
Go to the source system sm37 and see the cancelled job list for the user name remote user name,
when we run an infopackage in the bw it will trigger a collection job in the source sytem so that collection job has been terminted in the source sytem
kindly c the job log and also the short dumps in st22.
Kindly tel us the message in that short dump r reason for cancellation int he job log
so that we can comment on that
Hope this helps
Janardhan Kumar

Error with business rules

We are using 7.1.2 and I am unable to find business rule option in the view panel, and when I tried to open business rules client it is giving the below error Can any one gone through this.
application error- 429 activex component cant create object
Thanks
M.V

The same error when executing the business rule after opening the form.
" Error executing the calculation script. Check log for details"
I have checked the log also, but its also showing the same sentence.
While validating the rule, I have checked the same thing and I have compared with the UAT settings also. Its all are fine.
Only these 2 rules with the same form in all the folders are getting the error.
I have done one more thing that copying the content of Business rule code in UAt and paste the same in Production and saved it.
I have checked all other settings they are remain same and no changes. Then I have detached the rules from web form and saved it and log-off from planning.
Again logged in and tagged the BR's to the form and tried to execute, even then also the same error coming.
thanks
rreddy
Edited by: user4483519 on Sep 21, 2009 4:39 AM

OVM Manager 2.2.2: server pool error with file system type

I'm just getting started with OVM. I've installed OVM on one machine and the manager on another.
I created a server pool, which seemed to work OK but shows "Error" in the table under the "Server Pools" tab in the manager interface
When I edit it I see
Error: OVM-1011 OVM Manager communication with NNN.NNN.NN.NNN for operation Pre-check cluster root for Server Pool failed: <Exception: SR '/dev/sda3' not supported: type 'ocfs2.local' not in ['nfs', 'ocfs2.cluster']>
Can anyone explain this? Does this mean I can't use a local file system in OVM 2.2.2? I understood this was the case with OVM 3, which is why I went with 2.2.2.
Thanks.

Roger Ford wrote:
Error: OVM-1011 OVM Manager communication with NNN.NNN.NN.NNN for operation Pre-check cluster root for Server Pool failed: <Exception: SR '/dev/sda3' not supported: type 'ocfs2.local' not in ['nfs', 'ocfs2.cluster']>
Can anyone explain this? Does this mean I can't use a local file system in OVM 2.2.2? I understood this was the case with OVM 3, which is why I went with 2.2.2.You can't created a clustered pool with a local filesystem. You need to format the filesystem with ocfs2 in clustered mode.

Execute C# in PowerShell: errors with " using System.XML "

Hi , I'm trying to execute C# code in Power Shell 2.0 .
My problem is for the references at the beginning of the code:
$code = @"
using System;
using System.Collections;
using System.IO;
using System.Linq;
using System.Xml;
using System.Xml.Linq;
   public class Program
        static void Main()
        { /* the code wich works*/
Add-Type -TypeDefinition $code -Language "CSharpVersion3"
Powershell give me an error saying that " The type or namespace Linq doesn't exist" , and the same for Xml. I have Visual studio express 2013 .
How can add or import correctly those references? or what is my error?

Hi Rebegg,
As this issue is related to Visual Studio, I suggest you create a new thread on Visual Studio forum, more experts will assist you with this issue.
Visual Studio forum:
http://social.msdn.microsoft.com/Forums/en-US/home?category=visualstudio
In addition, about this issue, you have to add your assemblies to your PowerShellsession before you can reference them to you C# Code, you can use the script like:
$Assem = (
...add referenced assemblies here...
$Source = @"
...add C# source code here...
Add-Type -ReferencedAssemblies $Assem -TypeDefinition $Source -Language CSharp
Here are some similar posts for your reference:
http://ruudvanderlinden.com/2010/10/19/running-inline-c-with-custom-assemblies-in-powershell-2-0/
http://powershell.com/cs/media/p/133.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2010/05/07/using-csharp-c-code-in-powershell-scripts.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error with Technichal System Definition

Hi Everybody,
I've got like 20 systems connected to solman 7.1 sp10. All of them with their diagnostic agent and wily, all the wizards are green and everything looks good except for the "System Status" in solman_workcenter which is red. On the details i got the following error.
'DES~ABAP': Cannot get Technical System from ICM 'DES~ABAP~~ICM'
I haven't been able to find any log concerning to the error or anything that helps me to solve it.
Does anyone knows why is this happening or anoyone who have had this error?
Thanks in advance.
Rafael.

Hi
I know this thread here is some month old, But there might be others out there having the same problem, as I had. But I found the solution and here is what worked for me.
I opened the LMDB for this system, picked the line Technical instances in the navigation tree. I secured that the field" Technical Instance name" in the Section "Application Server ABAP" was correct . Then I filled in the port informations for the icm/server_port_0 in the HTTP Port section. This was empty in my situation. I compared with one of the other systems that were working.
The HTTP Port name I set to: icm/server_port_0 and the URL to HTTP://<hostname>:80<instno>
After this was saved the error was gone,
I also first checked that there was this entry in the instance profile
icm/server_port_0 = PROT=HTTP,PORT=80$$,TIMEOUT=600,PROCTIMEOUT=600
I was there, but I thing this will be a prerequisite for this to work.
Regards
Fritz Baunsgaard

Error with Business systems

Similar Messages

Maybe you are looking for