Error with triggering a external program

I used the following codes to trigger an external program, it worked fine for microsoft word but netmeeting seems to have a problem. I used a button to trigger it.
try {
Runtime cpRunTime = Runtime.getRuntime();
Process cpProcess = cpRunTime.exec("C:\\Program Files\\NetMeeting\\conf.exe");
catch (Exception ex) {
ex.printStackTrace();
The following are the error, can anyone tell me what is wrong or perhaps a solution. The netmeeting program did load but my applet crashed.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D06353E
Function=Java_sun_print_Win32PrintJob_printRawData+0x1ACA
Library=C:\j2sdk14\jre\bin\awt.dll
Current Java thread:
at sun.awt.windows.Win32OffScreenSurfaceData.initSurface(Native Method)
at sun.awt.windows.Win32OffScreenSurfaceData.createData(Win32OffScreenSu
rfaceData.java:114)
at sun.awt.windows.WVolatileImage.createHWData(WVolatileImage.java:87)
at sun.awt.windows.WVolatileImage.initAcceleratedBackground(WVolatileIma
ge.java:99)
at sun.awt.image.SunVolatileImage.validate(SunVolatileImage.java:264)
at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4681)
at javax.swing.JComponent.paint(JComponent.java:794)
at java.awt.GraphicsCallback$PaintCallback.run(GraphicsCallback.java:21)
at sun.awt.SunGraphicsCallback.runOneComponent(SunGraphicsCallback.java:
60)
at sun.awt.SunGraphicsCallback.runComponents(SunGraphicsCallback.java:97
at java.awt.Container.paint(Container.java:1268)
at sun.awt.RepaintArea.paint(RepaintArea.java:180)
at sun.awt.windows.WComponentPeer.handleEvent(WComponentPeer.java:260)
at java.awt.Component.dispatchEventImpl(Component.java:3586)
at java.awt.Container.dispatchEventImpl(Container.java:1582)
at java.awt.Window.dispatchEventImpl(Window.java:1581)
at java.awt.Component.dispatchEvent(Component.java:3367)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:445)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:191)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:130)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
Dynamic libraries:
0x00400000 - 0x00406000 C:\j2sdk14\bin\java.exe
0x77F80000 - 0x77FFB000 C:\WINNT\System32\ntdll.dll
0x77DB0000 - 0x77E0D000 C:\WINNT\system32\ADVAPI32.dll
0x77E80000 - 0x77F36000 C:\WINNT\system32\KERNEL32.DLL
0x77D30000 - 0x77DA1000 C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78046000 C:\WINNT\system32\MSVCRT.dll
0x6D330000 - 0x6D445000 C:\j2sdk14\jre\bin\client\jvm.dll
0x77E10000 - 0x77E75000 C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7C000 C:\WINNT\system32\GDI32.DLL
0x77570000 - 0x775A0000 C:\WINNT\System32\WINMM.dll
0x6D1D0000 - 0x6D1D7000 C:\j2sdk14\jre\bin\hpi.dll
0x6D300000 - 0x6D30D000 C:\j2sdk14\jre\bin\verify.dll
0x6D210000 - 0x6D228000 C:\j2sdk14\jre\bin\java.dll
0x6D320000 - 0x6D32D000 C:\j2sdk14\jre\bin\zip.dll
0x6D000000 - 0x6D0F6000 C:\j2sdk14\jre\bin\awt.dll
0x77800000 - 0x7781E000 C:\WINNT\System32\WINSPOOL.DRV
0x76620000 - 0x76630000 C:\WINNT\system32\MPR.DLL
0x75E60000 - 0x75E7A000 C:\WINNT\System32\IMM32.dll
0x77A50000 - 0x77B45000 C:\WINNT\system32\ole32.dll
0x6D180000 - 0x6D1D0000 C:\j2sdk14\jre\bin\fontmanager.dll
0x728A0000 - 0x728A6000 C:\WINNT\System32\DCIMAN32.dll
0x0CE20000 - 0x0CF98000 C:\WINNT\System32\nvoglnt.dll
0x51000000 - 0x5104B000 C:\WINNT\System32\ddraw.dll
0x77920000 - 0x77943000 C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000 C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000 C:\WINNT\System32\PSAPI.DLL
Local Time = Sun Sep 15 23:38:46 2002
Elapsed Time = 6
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.0_01-b03 mixed mode)
# An error report file has been saved as hs_err_pid1520.log.
# Please refer to the file for further information.
#

Could anyone help me with this problem? Is there some additional codes to run the dll files?
Wong Kwai Wing

Similar Messages

SM69 error-Can't exec external program (Permission denied).with exit code 1

Hi All,
I am trying to execute UNIX script via creating commend line in SM69.
But i am getting following error:
"Can't exec external program (Permission denied)
External program terminated with exit code 1"
Can any one guide me what could be the cause of this error.
Any Help will be appreciated.
Thanks & Regards

First use SU53, to see if you have all SAP-authoritys.
But I think, you have no authority to execute UNIX-programs.
or your UNIX-script is not executable?

Audio error with garageband and external usb audio interface

I am using Garageband 2.0.3. under ios 8.0.2 on my iPad 3 and via camera adapter a USB audio interface Focusrite Scarlett 2i4 or a Presonus iTwo.
When I start Garageband, it works well, the audio interfaces are recognized and I can record a track.
As soon as I switch from instrumtent to track view, the audio path is completely disturbed and all I can hear is some noise from the speaker.
Then I have to unplug the usb cable and plug it in again. Then audio works until I switch back to the instrument menu.
When I use the headphone output only there is no problem with Garageband and everything works fine.
Other applications audio applications don't show any error with each of the two audio interfaces.
Any feedback is very much appreciated, thanks.
Harald

I have this exact issue. However, I tried the Loopy app after after GB crashed and received an error message saying that core audio is not available. Rebooting resolves but the problem repeats. Any suggestions as to fixes? Btw; I have no such problem with Ipad 2 and ios 7.

-10810 Finder error with FW 400 external drive

I have an external drive with USB 2 and FW 400 connections. For years I've used it without any problems with the USB connection. Recently I've connected it using FW 400 and have repeatedly had the following problem:
I am using files on an external drive (Mac OS Extended, Journaled) with a FW 400 connection when suddenly both the application I'm using and the Finder hang. I pick Force Quit from the Apple menu and in the list the app and the Finder both show up as not responding. I can force quit the app at that point but when I try to force relaunch the Finder it kills the finder rather than relaunching it. If I try to launch it from the Dock I get an error saying "The application Finder can't be opened -10810." After about 5 minutes I get an error message saying that I'd improperly disconnected my FW drive without ejecting it first (even though I neither ejected it nor disconnected it). At that point, the Finder relaunches and everything seems fine, though the FW drive (still plugged in and turned on) is now gone and doesn't appear in Disk Utility. If I unplug and turn off the FW drive and then plug it in again and turn it on again it will mount. Then the app that I was originally using relaunches on its own. At that point I can quit everything, eject everything, and restart without difficulty. Disk Utility finds nothing wrong with the external drive.
Any idea what's going on and how to fix it?
Obviously I could just go back to USB but I want to know what's going on.
Thanks!
Danny
MacBook 4,1
Mac OS X 10.6.8

Firewire 800 is fully backwards compatible with Firewire 400. You need a "bilingual" firewire cable or adapter to plug the Firewire 400 drive in your Firewire 800 port.

RFC destination definition with non-unicode external program

Hello All,
we have one issue with our RFID system connecting to WM system (SWD).
For most functions, external RFID server/middleware makes RFC call to SAP system. Means, from outside system to inside SAP. This seems to be working fine.
But in one case, SAP needs to print label to RFID printer. In this case, SAP is calling external RFID server/middleware using RFC destination. Means, from inside SAP to outside system. This is failing.
We think this has something to do with ECC60 being unicode system, and the RFC destination setup. We define rfc destination "ZRFID_SSI" in SM59. We define it same way as in as-is SSI 4.6B production system. But in SWD ECC60 system, SM59 has more options. We define as 'non-unicode' because target RFID server/middleware is non-unicode Windows server. RFC destination is actually working ok.
To send label to printer, SWD calls function ZFSSIRF202 with remote destination ZRFID_SSI. Listener on RFID server/middleware will respond to function call. This also seems to be working. But then, RFID server/middleware cannot process the data from ZFSSIRF202, log says that data is "0". (Actually, the first time SWD calls, log says 0 data, the 2nd time there is connection failure, the 3rd time it is 0 data, 4th time connection failure, etc, etc.)
Compared with production environment, everything is the same, except that SAP is unicode system. So, our suspicion is, that when ECC60 system sends data, it is encoded somewhat a little different than when SAP 46B system sends data. I have similar experience with our other interface (XSI), also involving RFC desintion, but XML file exchange. Here, ECC60 is encoding XML file with UTF-16, but SAP46B was encoding with UTF-8.
Anyone know how to help ?

Hi Jeongbae,
as of NW 7.0 EhP2, it is possible to directly set the code page in SM59.
In earlier releases, this is not possible.
In general, SAP systems use the logon language (SY-LANGU) to determine the code page, if this is available.
Please check SAP note 788239.
Please also have a look at SAP note 991572 for possible alternative settings, if SY-LANGU is not available.
In addition I would recommend to have a look at SAP note 1021459.
However in order to analyze the problem properly, you need to know the exact short dump text (via rfc trace).
For XML processing, please read SAP note 1017101. UTF-16 should NOT be used in an XML file !
Best regards,
Nils Buerckel
SAP AG

Errors with buttons and clearing program

I have 3 errors in this program. How do I set up the text field for null (''')?
import java.awt.*;
import javax.swing.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
public class Calculator extends JFrame implements ActionListener {
   private JPanel panelAdder;
   private JLabel labela;
   private JLabel labelt;
   private JLabel labelr;
   private JTextField textFieldAmount;
   private JTextField textFieldTerm;
   private JTextField textFieldRate;
   private JTextField textFieldResult;
   private JTextField textFieldNull;
   private JButton buttonCalc;
   private JButton buttonClear;
   private JButton buttonExit;
public void Calculator1() {
initComponents();
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setVisible(true);
pack();
// Add Listeners
buttonCalc.addActionListener(this);
buttonClear.addActionListener(this);
public void actionPerformed(ActionEvent event) {
    Object source = event.getSource ();
     if (source == buttonCalc); {
        setResultValue();
     if (source == buttonClear); {
          newJTextFieldNull("");
public void initComponents() {
//Initialize Components
      panelAdder = new JPanel();
      labela = new JLabel("Amount");
      textFieldAmount = new JTextField();
      labelt = new JLabel("Term");
      textFieldTerm = new JTextField();
      labelr = new JLabel("Rate");
      textFieldRate = new JTextField();
      textFieldResult = new JTextField();
      buttonCalc = new JButton("Calculate");
      JTextField amountField = new JTextField("");
      buttonClear = new JButton("Clear");
      buttonExit = new JButton("Exit");
//Set Object Attributes
textFieldResult.setEditable(false);
textFieldResult.setColumns(8);
textFieldAmount.setColumns(6);
textFieldTerm.setColumns(2);
textFieldRate.setColumns(2);
Container contentPane = getContentPane();
contentPane.setLayout(new FlowLayout());
//Lets add the components to the panel
panelAdder.add(labela);
panelAdder.add(textFieldAmount);
panelAdder.add(labelt);
panelAdder.add(textFieldTerm);
panelAdder.add(labelr);
panelAdder.add(textFieldRate);
panelAdder.add(buttonCalc);
panelAdder.add(textFieldResult);
panelAdder.add(buttonClear);
panelAdder.add(buttonExit);
contentPane.add(panelAdder);
setVisible(true);
private void setResultValue() {
   double amount = Double.parseDouble (textFieldAmount.getText());
   double rate = Double.parseDouble (textFieldRate.getText());
   double term = Integer.parseInt(textFieldTerm.getText());
   double result = amount * ( rate * Math.pow ( ( 1 + rate ), term ) ) / ( Math.pow( ( 1 + rate ), term ) - 1 );
   textFieldResult.setText(Double.toString(result));
public static void main(String[] args) {
Calculator frame = new Calculator();
}The error is:
line 38: cannot find symbol newJTextFieldNull(''');

You're trying to call a method that doesn't exist.
1) You either have to do something different or create the method.
2) You need to learn to believe what the compiler is telling your. The answer is in the error message.
3) Your class also doesn't have a constructor.

Error with small sap script program

REPORT ZFORM1 .
TABLES : ZGTABLE.
types:begin of warea,
 trackid type zgtable-trackid,
 artist type zgtable-artist,
 end of warea.
data:itable like zgtable occurs 0 with header line.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
* DEVICE = 'PRINTER'
 DIALOG = 'X'
 FORM = 'ZFORM1'
 LANGUAGE = SY-LANGU
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
* EXCEPTIONS
* CANCELED = 1
* DEVICE = 2
* FORM = 3
* OPTIONS = 4
* UNCLOSED = 5
* MAIL_OPTIONS = 6
* ARCHIVE_ERROR = 7
* INVALID_FAX_NUMBER = 8
* MORE_PARAMS_NEEDED_IN_BATCH = 9
* SPOOL_ERROR = 10
* CODEPAGE = 11
* OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 ELEMENT = 'MAIN'
* FUNCTION = 'SET'
* TYPE = 'BODY'
 WINDOW = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
* EXCEPTIONS
* UNOPENED = 1
* BAD_PAGEFORMAT_FOR_PRINT = 2
* SEND_ERROR = 3
* SPOOL_ERROR = 4
* CODEPAGE = 5
* OTHERS = 6
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Inside sapscript:
/E MAIN
P1 Track id : </> &ITABLE-TRACKID&
P1 Artist : </> &ITABLE-ARTIST&
output:
Trackid : 00000000000
Artist :
Why the output is like that? I expect the output to be first record of the table.Please help me.

Where is loop ( Internal table ),Just see the bold code
REPORT ZFORM1 .
TABLES : ZGTABLE.
data : begin of itable occurs 0,
 trackid type zgtable-trackid,
 artist type zgtable-artist,
 end of itable .
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
 DIALOG = 'X'
 FORM = 'ZFORM1'
 LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
select track id artist from zgtable into table itable.
if sy-subrc ne 0.
*message
endif.
loop at itable .
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 ELEMENT = 'MAIN'
FUNCTION = 'SET'
TYPE = 'BODY'
 WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear itable.
endif.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Seshu

SM69-Can't exec external program ( External program terminated with ecode1)

Hi All,
Client requirement is to Move File from Presentation Server to Application Server.
I am executing UNIX script on AIX OS via SM69.
But I am getting the following error:
Can't exec external program (No such file or directory)
External program terminated with exit code 1
Also getting same error with FM-SXPG_COMMAND_EXECUTE .
Below is the code..
data: l_exitcode type btcxpgexit,
        l_parms type btcxpgpar,
        l_status type btcxpgstat.
data: lt_protocol type standard table of btcxpm,
        l_protocol type btcxpm.
concatenate 'C:\Venkat1\PARBIND.BMP'
                      'D:\Venkat2\PARBIND.BMP'
                      into l_parms
                      separated by space.
* External command:
* - Unix - mv
call function 'SXPG_COMMAND_EXECUTE'
exporting
    commandname                   = 'Z_MV'
    additional_parameters         = l_parms
importing
    status                        = l_status
    exitcode                      = l_exitcode
tables
    exec_protocol                 = lt_protocol
exceptions
    no_permission                 = 1
    command_not_found             = 2
    parameters_too_long           = 3
    security_risk                 = 4
    wrong_check_call_interface    = 5
    program_start_error           = 6
    program_termination_error     = 7
    x_error                       = 8
    parameter_expected            = 9
    too_many_parameters           = 10
    illegal_command               = 11
    wrong_asynchronous_parameters = 12
    cant_enq_tbtco_entry          = 13
    jobcount_generation_error     = 14
    others                        = 15.
if sy-subrc ne 0
endif.
Can any one guide what is the cause of error....
Any help will be appreciated.
Regards
Arbind

Hi Paul,
Thanks.
But still Basis Consultants are telling it is correct from there side.
Is there any other way to move files from Presentaion Server to Application Server in Background Processing.
I have used CL_GUI_FRONTEND_SERVICES=>FILE_COPY
It is working fine in Foreground but in Background Proceesing, it is not working.
Can u provide any solution ?
Thanks
Arbind

SM69-Can't exec external program (Exec format error)

Hi All,
I am executing UNIX script on HP-UX system via SM69.
But getting following error:
u201CCan't exec external program (Exec format error)
External program terminated with exit code 1u201D
Also getting same error with FM-SXPG_COMMAND_EXECUTE & SXPG_COMMAND_EXECUTE
Can any one guide what is the cause of error.
Any help will be appreciated.
Regards

Check the Sample program. You can test or check the Unix commands using the below program.
You can use the commands Like LS to list all the files.
REPORT ZUNIX line-size 400
                no standard page heading.
data: unixcom like   rlgrap-filename.
"7 full perimission to read
"7 full permission to change
"7 full permission to delete
unixcom = 'CHMOD 777 fillfullpath'.
data: begin of tabl occurs 500,
        line(400),
      end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
                id 'TAB'     field tabl[].

Error in External programe

Dear All,
We are facing error in one of external programe; which is included in one of step of a job. the programe is 'sleep' which is resposible for inserting delay in job e.g. 300 sec. the value 300 is the parameter for the external programe.
when we run the job this program doesnt stop. keep on giving delay in job. or else in other job it doesnt run .... can any budy suggest hte troubleshooting of the same.
Thanks in advanse.
Regards,
Swapnil Lakhe

Hello Swapnil,
The most probable reason that I get from the description is that the counter is never passed back to the job control.
What you can do as an alternative is write an simple ABAP to loop for 300 secs and then write an message Like "Completed or finished" and enter this ABAP program as an step instead of the External program.
This should work 100 %.
Regards
Amit

BAPI_TRIP_CREATE_FROM_DATA works in SE37, but not from external program

BAPI_TRIP_CREATE_FROM_DATA works in SE37, but gives error when calling from external program.
The error is "Deserialisation failed". I have the WSDL generated by a Web Service wizard in SE 37,
so there should not be any problem like element name or case(upper/lower) mismatch etc. I populate all mandatory fields.
I am using the web service created by wizard in a InfoPath form.
This is the exact error:
The SOAP response indicates that an error occurred:
Deserialisation failed

Thanks for this pointer. I downloaded the code and looked at the same. It very useful as conceptual and coding guidance. However, there are many BAPis working in our product already, only a few return the same error "Deserialisation failed" The sample you pointed out uses BAPI_FLTRIP_CREATE but we have problem with the following BAPIs:
BAPI_TRIP_CREATE_FROM_DATA
BAPI_ADDRESSEMP_CREATE
BAPI_FAMILY_CREATE
All of them give error similar to following:
Deserialisation failed
<detail>
 <n0:SimpleTransformationFault xmlns:n0="http://www.sap.com/transformation-templates">
 <MainName>/1BCDWB/WSS0071212021944898000</MainName>
 <ProgName>/1BCDWB/WSS0071212021944898000</ProgName>
 <Line>170 </Line>
 <Valid>X</Valid>
 <ReferenceFault>
 <DescriptionText>Error accessing the ref. node 'EMPLOYEENUMBER'</DescriptionText>
 <RefName>EMPLOYEENUMBER</RefName>
 </ReferenceFault>
 <Caller>
 <Class>CL_SRG_RFC_PROXY_CONTEXT</Class>
 <Method>IF_SXML_PART~DECODE</Method><Positions>1 </Positions>
 </Caller>
 </n0:SimpleTransformationFault>
</detail>
Any more suggestions are most welcome and highly appreciated.

Error Message: External program terminated with exit code 2

Hi ALL
We are doing REORG tablespace in DB13 and i am getting below error message. Please help us to resolve the issue.
20100430 113234 DB6PM 000 Reorg_Tbspc:Command DB6CLP failed on server
20100430 103959 DB6PM 000 Reorg_Tbspc:Exitcode:Error
20100430 103959 DB6PM 000 Reorg_Tbspc:ERRORMESSAGE: An SQL error occured. Will print output of the command
20100430 103959 DB6PM 000 Reorg_Tbspc:External program terminated with exit code 2
20100430 103959 DB6PM 000 REASON=C call failed
Regards
K.Gunasekar
Edited by: KGUNASEKAR on Apr 30, 2010 6:55 AM

Exitcode 2, if returned from the OS, means "No such file or directory". Note that as of SAP kernel release 7, you usually do not have DB6CLP any more. Can you check if the executable is available in the SAP exe directory ?
If running SAÜ kernel 700 or higher, I suggest to apply a recent SP level.
Malte

Returning Error Status back from Form to external program

Question,
I am trying to run a form essentially from the command line. I need to programatically catch any error codes that might have occured in the form by an external program. I can find nothing about returning errors back from the form or how to display it.
Any assistance is appreciated.
Andy Hendrickson
null

Hello Andreas,
Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
Cheers,
Mike

When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

You need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil

FUNCTION SXPG_COMMAND_EXECUTE External program terminated with exit code 2

HI,
I am using the below Function Module
gv_ap = '/nfs/ficheiros/FicheiroExtraccaoSIF/outbox'
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
      EXPORTING
           commandname                   = 'Z_LS'
           additional_parameters         = gv_ap
      TABLES
           exec_protocol                 = t_fich
      EXCEPTIONS
           no_permission                 = 1
           command_not_found             = 2
           parameters_too_long           = 3
           security_risk                 = 4
           wrong_check_call_interface    = 5
           program_start_error           = 6
           program_termination_error     = 7
           x_error                       = 8
           parameter_expected            = 9
           too_many_parameters           = 10
           illegal_command               = 11
           wrong_asynchronous_parameters = 12
           cant_enq_tbtco_entry          = 13
           jobcount_generation_error     = 14
           OTHERS                        = 15.
with this folder '/nfs/ficheiros/FicheiroExtraccaoSIF/outbox' return the error:
/nfs/ficheiros/FicheiroExtraccaoSIF/outbox not found and
External program terminated with exit code 2
but if i map other directory the function return the files and folders that directory have.
Anyone could help me.
Thanks and Regards.
Eduardo Paiva

Hi,
Yes i have read access to this directory and the command 'Z_LS' exists.
Best Regards,
Eduardo Paiva

Error with triggering a external program

Similar Messages

Maybe you are looking for