Errors in DB alert log for distributed transactions
Hi,
I am receiving the following type of errors regularly in one of our development databases:
Errors in file e:\oracle\product\diag\rdbms\agdev10g\agdev10g\trace\agdev10g_reco_16356.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
ORA-02062: distributed recovery received DBID d672931d, expected 2d7b9dec
ORA-12154: TNS:could not resolve the connect identifier specified
ORA-12500: TNS:listener failed to start a dedicated server process
ORA-12154: TNS:could not resolve the connect identifier specified
From researching on the net it looks like it may have something to do with distributed transactions and database links however I'm not sure how to proceed to diagnose the problem and find out where the issue is. Can anyone help?
Thanks
Adam
Edited by: Adam J. Sawyer on 27/05/2010 16:57
SQL*Net typically involves two systems so post following details for both systems
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version
or post Oracle version to 4 decimal places
oerr ora 12514
12514, 00000, "TNS:listener does not currently know of service requested in connect descriptor"
// *Cause: The listener received a request to establish a connection to a
// database or other service. The connect descriptor received by the listener
// specified a service name for a service (usually a database service)
// that either has not yet dynamically registered with the listener or has
// not been statically configured for the listener. This may be a temporary
// condition such as after the listener has started, but before the database
// instance has registered with the listener.
// *Action:
// - Wait a moment and try to connect a second time.
// - Check which services are currently known by the listener by executing:
// lsnrctl services <listener name>
// - Check that the SERVICE_NAME parameter in the connect descriptor of the
// net service name used specifies a service known by the listener.
// - If an easy connect naming connect identifier was used, check that
// the service name specified is a service known by the listener.
// - Check for an event in the listener.log file.
bcm@bcm-laptop:~$ oerr ora 2062
02062, 00000, "distributed recovery received DBID %s, expected %s"
// *Cause: a database link at a coordinator no longer points to the expected
// database. Link may have been redefined, or a different DB mounted.
// *Action: restore link definition or remote database.
bcm@bcm-laptop:~$ oerr ora 12154
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
// - If you are using local naming (TNSNAMES.ORA file):
// - Make sure that "TNSNAMES" is listed as one of the values of the
// NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA)
// - Verify that a TNSNAMES.ORA file exists and is in the proper
// directory and is accessible.
// - Check that the net service name used as the connect identifier
// exists in the TNSNAMES.ORA file.
// - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
// file. Look for unmatched parentheses or stray characters. Errors
// in a TNSNAMES.ORA file may make it unusable.
// - If you are using directory naming:
// - Verify that "LDAP" is listed as one of the values of the
// NAMES.DIRETORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA).
// - Verify that the LDAP directory server is up and that it is
// accessible.
// - Verify that the net service name or database name used as the
// connect identifier is configured in the directory.
// - Verify that the default context being used is correct by
// specifying a fully qualified net service name or a full LDAP DN
// as the connect identifier
// - If you are using easy connect naming:
// - Verify that "EZCONNECT" is listed as one of the values of the
// NAMES.DIRETORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA).
// - Make sure the host, port and service name specified
// are correct.
// - Try enclosing the connect identifier in quote marks.
// See the Oracle Net Services Administrators Guide or the Oracle
// operating system specific guide for more information on naming.
bcm@bcm-laptop:~$ oerr ora 12500
12500, 00000, "TNS:listener failed to start a dedicated server process"
// *Cause: The process of starting up a dedicated server process failed.
// The executable could not be found or the environment may be set up
// incorrectly.
// *Action: Turn on tracing at the ADMIN level and reexecute the operation.
// Verify that the ORACLE Server executable is present and has execute
// permissions enabled. Ensure that the ORACLE environment is specified
// correctly in LISTENER.ORA. The Oracle Protocol Adapter that is being
// called may not be installed on the local hard drive. Please check that
// the correct Protocol Adapter are successfully linked.
// If error persists, contact Oracle Customer Support.What explicit SQL or command trigger these errors?
Similar Messages
-
Hi There,
Recently I started seeing these errors in the alert log for one of the databases:
Tue Aug 04 05:05:00 2009
Errors in file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc:
ORA-12012: error on auto execute of job 130961
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
ORA-27301: OS failure message: The pipe has been ended.
ORA-27302: failure occurred at: sjsec 9
ORA-27303: additional information: The pipe has been ended.
So, I tried looking at the trace file associated with the error, and here is what I get:
$ cat ebcd01_j000_6104.trc
Dump file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc
Tue Aug 04 05:05:00 2009
ORACLE V10.2.0.3.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Release 10.2.0.3.0 - Production
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1095M/4095M, Ph+PgF:7747M/12110M, VA:1367M/2047M
Instance name: ebcd01
Redo thread mounted by this instance: 1
Oracle process number: 53
Windows thread id: 6104, image: ORACLE.EXE (J000)
*** ACTION NAME:(DEL_ARCH_EBCP01) 2009-08-04 05:05:00.191
*** MODULE NAME:(DBMS_SCHEDULER) 2009-08-04 05:05:00.191
*** SERVICE NAME:(SYS$USERS) 2009-08-04 05:05:00.191
*** SESSION ID:(871.15642) 2009-08-04 05:05:00.191
*** 2009-08-04 05:05:00.191
ORA-12012: error on auto execute of job 130961
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
ORA-27301: OS failure message: The pipe has been ended.
ORA-27302: failure occurred at: sjsec 9
ORA-27303: additional information: The pipe has been ended.
I'm not sure what job is causing this as there is no reference and also not sure how to resolve this issue!! How can I properly trace back these errors? Any ideas or tips to what should I do?
I'm running 10.2.0.3 database on windows 2003 server.
ThanksI found the problem.. the executable job was referring to a none existing batch file..
I have refreshed the database from production some time ago and the jobs I have setup are referring to production scripts and paths (which we didnt have on dev)..
This is now resolved.
Thanks -
ORA-00205: error in identifying control file, check alert log for more info
Hi
I'm creating a database manually,
I am hitting with the following error :
SQL> startup mount
ORACLE instance started.
Total System Global Area 150667264 bytes
Fixed Size 1335080 bytes
Variable Size 92274904 bytes
Database Buffers 50331648 bytes
Redo Buffers 6725632 bytes
ORA-00205: error in identifying control file, check alert log for more info
Following is the entry in init.ora
control_files='/u01/oracle/db/oradata/testdb/control01.ctl','/u01/oracle/db/oradata/testdb/control02.ctl'
and this the owner priviliges of /u01/oracle/db/oradata/testdb directory
drwxrwx--- 2 oracle dba 4096 Oct 10 12:16 testdbFound in $ORACLE_BASE/diag/rdbms/$ORACLE_SID/$ORACLE_SID/trace/alert/log.xml
ORA-00210: cannot open the specified control fileORA-00202: control file: '/u01/oracle/db/oradata/testdb/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/oracle/db/oradata/testdb/control01.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3 -
ORA-00205: error in identifying control file, check alert log for more inf
Hi All,
I created my Database on a directory /mydir .The database is created and sucessufyully working then I mounted this directoy to a shared disk on the same /mydir.My database datafile where restored under /mydir .Now When I try to restart my database I m getting
ORA-00205: error in identifying control file, check alert log for more inf
I check all my database data files are there including my control files.
Any idea why this occuring and How to fix it.
Best Regards.user11191992 wrote:
Hi All,
I created my Database on a directory /mydir .The database is created and sucessufyully working then I mounted this directoy to a shared disk on the same /mydir.My database datafile where restored under /mydir .Now When I try to restart my database I m getting
ORA-00205: error in identifying control file, check alert log for more inf
I check all my database data files are there including my control files.
Any idea why this occuring and How to fix it.
Best Regards.Please post the message in the alert-file as stated.
It can e.g. be that while copying the file permissions have been changed, making the files not readable for the oracle user
HTH
FJFranken -
Error in identifying control file, check alert log for more info
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30ayadsufyan wrote:
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30I'd say the error message is pretty self-evident:
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified fileWhat do you suppose "can not find the specified file" means?
And what does this have to do with database security? -
ORA-00205: error in identifying control file, check alert log for more
I am trying to upgrade database software from 11.2.0.1 to 11.2.0.2 and followed the steps given in the Doc ID 1276368.1 in linux 86 OS environment . I am in step 9 where i need to start up the database in startup upgrade mode. I get the the following error. Please help. This out of box upgrade is quite tricky and my database is stigged version. Not able to trouble shoot further, Please help me to go forward.
sqlplus " / as sysdba "
SQL> spool /tmp/upgrade.log
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 1607008256 bytes
Fixed Size 1344476 bytes
Variable Size 973081636 bytes
Database Buffers 620756992 bytes
Redo Buffers 11825152 bytes
ORA-00205: error in identifying control file, check alert log for more info
Do i shutdown and restart again? I need to run @catupgrd.sql; and other.sql to upgrade it and then apply CPU patch.
Please help...regardsFatal NI connect error 12637, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 21-NOV-2011 04:49:04
Tracing not turned on.
Tns error struct:
ns main err code: 12637
TNS-12637: Packet receive failed
ns secondary err code: 12532
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (3912) as a result of ORA-609
Mon Nov 21 04:59:02 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 04:59:04 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 26
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 04:59:09 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 04:59:09 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 04:59:09 2011
ARCH shutting down
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC3: Archival stopped
ARC1: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC2: Archival stopped
Thread 1 closed at log sequence 1458
Successful close of redo thread 1
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
MMON started with pid=15, OS id=4342
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon C:\Users\MVEMURI 07:48:48 2011
MMNL started with pid=16, OS id=4347
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 07:48:49 2011
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 2616737889
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Mon Nov 21 07:48:54 2011
ALTER DATABASE OPEN
LGWR: STARTING ARCH PROCESSES
Mon Nov 21 07:48:54 2011
ARC0 started with pid=20, OS id=4398
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Mon Nov 21 07:48:55 2011
ARC1 started with pid=21, OS id=4403
Mon Nov 21 07:48:55 2011
ARC2 started with pid=22, OS id=4408
ARC1: Archival started
ARC2: Archival started
ARC2: Becoming the 'no FAL' ARCH
ARC2: Becoming the 'no SRL' ARCH
Mon Nov 21 07:48:55 2011
ARC3 started with pid=23, OS id=4413
ARC1: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 1458
Current log# 3 seq# 1458 mem# 0: /u01/app/oracle/oradata/rtborcl/redo03.log
Current log# 3 seq# 1458 mem# 1: /u02/app/oracle/oradata/redo03b.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:977954 end:979234 diff:1280
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Mon Nov 21 07:48:58 2011
SMON: enabling tx recovery
Database Characterset is WE8MSWIN1252
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Nov 21 07:49:03 2011
QMNC started with pid=24, OS id=4418
Mon Nov 21 07:49:10 2011
db_recovery_file_dest_size of 4977 MB is 13.68% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Nov 21 07:49:12 2011
Completed: ALTER DATABASE OPEN
Mon Nov 21 07:49:12 2011
Starting background process CJQ0
Mon Nov 21 07:49:12 2011
CJQ0 started with pid=25, OS id=4470
Mon Nov 21 07:54:05 2011
Starting background process SMCO
Mon Nov 21 07:54:05 2011
SMCO started with pid=26, OS id=4515
Mon Nov 21 10:08:01 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:08:01 2011
Thread 1 advanced to log sequence 1459 (LGWR switch)
Current log# 1 seq# 1459 mem# 0: /u01/app/oracle/oradata/rtborcl/redo01.log
Current log# 1 seq# 1459 mem# 1: /u02/app/oracle/oradata/redo01b.log
Mon Nov 21 10:08:04 2011
Archived Log entry 1421 added for thread 1 sequence 1458 ID 0x990b1f4c dest 1:
Mon Nov 21 10:12:53 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:12:53 2011
Thread 1 advanced to log sequence 1460 (LGWR switch)
Current log# 2 seq# 1460 mem# 0: /u01/app/oracle/oradata/rtborcl/redo02.log
Current log# 2 seq# 1460 mem# 1: /u02/app/oracle/oradata/redo02b.log
Mon Nov 21 10:12:53 2011
Archived Log entry 1422 added for thread 1 sequence 1459 ID 0x990b1f4c dest 1:
Mon Nov 21 10:14:44 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 10:14:45 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 4
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 10:14:49 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 10:14:54 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC3: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC2: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC1: Archival stopped
Thread 1 closed at log sequence 1460
Successful close of redo thread 1
Mon Nov 21 10:15:01 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 10:15:02 2011
Stopping background process VKTM:
Mon Nov 21 10:15:08 2011
Instance shutdown complete
Mon Nov 21 11:52:11 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/db_2/dbs/initrtborcl.ora
System parameters with non-default values:
processes = 150
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Create Relation DFW_CONFIG_CAPTURE
Create Relation DFW_CONFIG_ITEM
Mon Nov 21 11:52:17 2011
PMON started with pid=2, OS id=7339
Mon Nov 21 11:52:17 2011
PSP0 started with pid=3, OS id=7344
Mon Nov 21 11:52:18 2011
VKTM started with pid=4, OS id=7349
VKTM running at (100ms) precision
Mon Nov 21 11:52:18 2011
GEN0 started with pid=5, OS id=7356
Mon Nov 21 11:52:19 2011
DIAG started with pid=6, OS id=7361
Mon Nov 21 11:52:19 2011
DBRM started with pid=7, OS id=7366
Mon Nov 21 11:52:19 2011
DIA0 started with pid=8, OS id=7371
Mon Nov 21 11:52:19 2011
MMAN started with pid=9, OS id=7376
Mon Nov 21 11:52:19 2011
DBW0 started with pid=10, OS id=7381
Mon Nov 21 11:52:19 2011
LGWR started with pid=11, OS id=7386
Mon Nov 21 11:52:19 2011
CKPT started with pid=12, OS id=7391
Mon Nov 21 11:52:19 2011
SMON started with pid=13, OS id=7396
Mon Nov 21 11:52:19 2011
RECO started with pid=14, OS id=7401
Mon Nov 21 11:52:19 2011
MMON started with pid=15, OS id=7406
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Nov 21 11:52:19 2011
MMNL started with pid=16, OS id=7411
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 11:52:20 2011
ALTER DATABASE MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Nov 21 11:52:21 2011
Checker run found 1 new persistent data failures -
ORA-00205: error in identifying controlfile, check alert log for more info
Hello All,
I am performing my first Collab Suite install in quite some time and I have successfully installed Collaboration Suite on Linux Red Hat AS 4. I first performed an infrastructure installation for the Collab Suite database which completed with no errors, however, it appears that no control files were created in my $ORACLE_HOME/dbs directory during installation. I am also unable to specify their exact location in the initSID.ora file as I am unable to find them in any other directory on my server. The database starts despite the control file error, as you can see from the second SQL*Plus prompt. However, I am unsure how to create the control files or correct this error. Any assistance would be greatly appreciated!
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 09:51:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 100663296 bytes
Fixed Size 778024 bytes
Variable Size 99623128 bytes
Database Buffers 0 bytes
Redo Buffers 262144 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
======================================================================
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 11:18:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected.
SQL> startup nomount
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining optionsControl files are database-specific, since they contain information describing the database (location of data files, etc.) You can't copy them from one database to another.
Do you have a backup? -
Sometimes I have an error connecting SQL Azure. The error occurs in an asp.net application and in a windows service running on VM in Azure. Error details:
System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Transactions.TransactionManagerCommunicationException: Network access for Distributed Transaction Manager (MSDTC) has been disabled. Please enable DTC for network
access in the security configuration for MSDTC using the Component Services Administrative tool. ---> System.Runtime.InteropServices.COMException: The transaction manager has disabled its support for remote/network transactions. (Exception from HRESULT:
0x8004D024)
at System.Transactions.Oletx.IDtcProxyShimFactory.ReceiveTransaction(UInt32 propgationTokenSize, Byte[] propgationToken, IntPtr managedIdentifier, Guid& transactionIdentifier, OletxTransactionIsolationLevel& isolationLevel,
ITransactionShim& transactionShim)
at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
--- End of inner exception stack trace ---
at System.Transactions.Oletx.OletxTransactionManager.ProxyException(COMException comException)
at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
at System.Transactions.TransactionStatePSPEOperation.PSPEPromote(InternalTransaction tx)
at System.Transactions.TransactionStateDelegatedBase.EnterState(InternalTransaction tx)
at System.Transactions.EnlistableStates.Promote(InternalTransaction tx)
at System.Transactions.Transaction.Promote()
at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction)
at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts)
at System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction tx)
at System.Data.ProviderBase.DbConnectionPool.PrepareConnection(DbConnection owningObject, DbConnectionInternal obj, Transaction transaction)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal&
connection)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
--- End of inner exception stack trace ---
at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection()
at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClassb.<GetResults>b__9()
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
at System.Data.Entity.Core.Objects.DataClasses.EntityReference`1.Load(MergeOption mergeOption)
at System.Data.Entity.Core.Objects.DataClasses.RelatedEnd.DeferredLoad()
at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.LoadProperty[TItem](TItem propertyValue, String relationshipName, String targetRoleName, Boolean mustBeNull, Object wrapperObject)
at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.<>c__DisplayClass7`2.<GetInterceptorDelegate>b__2(TProxy proxy, TItem item)Hello,
I am not an expert in MSDTC but as we know,SQL Azure Database does not support
distributed transactions. This means that SQL Azure doesn’t allow Microsoft Distributed Transaction Coordinator (MS DTC) to delegate distributed transaction handling.
One common cause of MSDTC getting involved in Entity Framework applications is the fact that we close and reopen the same connection as needed (i.e. for each query that is executed).To avoid the stack from opening and closing the connection multiple times,
you can simply open the connection explicitly and run the queries in the same connectio.
The following thread is about a similar issue, please refer to:
http://answers.flyppdevportal.com/categories/azure/sqlazure.aspx?ID=d705a8cf-cba4-494c-96f6-96a136bd29e3
What's more, you can also try the workaround that involves setting the Enlist option of the SQL Azure connection to false. For the detail explanation, please refer to:Entity
FrameWork and SQL Azure
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
"Error in the alert log file " - please help
Hi ALL,
I am getting following errors in the alert log frequently.
My database version is:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Productio
NLSRTL Version 10.2.0.1.0 - Production
Thu Aug 30 16:58:19 2007
Memory Notification: Library Cache Object loaded into SGA
Heap size 2172K exceeds notification threshold (2048K)
KGL object name :select object_name from all_objects where object_name='TOAD_PROFILER' and object_type='PACKAGE'
Thu Aug 30 17:09:36 2007
************************************************************************************Additionally you can visit here:
Alert Error from trc files--Heap size 5236K exceeds notification threshold
geting error in alert log file
Adith -
Error in Standby alert log continuously
After I setup the Physical Standby and Logical Standby database, I found lots of errors showing in alert log of Standby database.
LOGMINER: Error 308 encountered, failed to read missing logfile /u01/oradata/arch2/primary/1_1_111111111.dbf
According to the doc, I set the values LOG_ARCHIVE_DEST_3 in case of role transition:
(for primary)
LOCATION=/u01/oradata/arch2/primary/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=primary(for standby)
LOCATION=/u01/oradata/arch2/standby/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=standbyWhen I run this command, the error keeps showing in the alert log continuously! Why does it look for the path "primary", but not "standby" ?
ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
Help! Does anyone know the problem? All new data can't be found in the logical standby now.
Thank you!When I enable the LOG_ARCHIVE_DEST_STATE_3, the errors show in alert log again!
LOGMINER: Error 308 encountered, failed to read missing logfile /u01/oradata/arch2/primary/1_1_111111111.dbf
SELECT TYPE,STATUS FROM V$LOGSTDBY;
COORDINATOR
ORA-01291: missing logfile
here are my parameters:
Primary:
LOG_ARCHIVE_DEST_1='LOCATION=/u01/oradata/arch/ MANDATORY VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=primary'
LOG_ARCHIVE_DEST_2='SERVICE=ORCL_SB LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=standby'
LOG_ARCHIVE_DEST_3='LOCATION=/u01/oradata/arch2/primary/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=primary'
Standby:
LOG_ARCHIVE_DEST_1='LOCATION=/u01/oradata/arch/ MANDATORY VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=standby'
LOG_ARCHIVE_DEST_2='SERVICE=ORCL_PRI LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=primary'
LOG_ARCHIVE_DEST_3='LOCATION=/u01/oradata/arch2/standby/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=standby'
Why does the path in primary parameter file show in standby alert log?? -
Connection Factory class for Distributed Transaction?
Definition of Managed Datasources goes like this at URL: http://download.oracle.com/docs/cd/B31017_01/web.1013/b28958/datasrc.htm#CHDDADCE
Managed data sources are managed by OC4J. This means that OC4J provides critical system infrastructure such as global transaction management, connection pooling, and error handling.
In the same document, I could also see a section for configuring Connection Pool, that uses 'factory-class' as 'oracle.jdbc.pool.OracleDataSource' as shown below:
<connection-pool name="myConnectionPool">
<connection-factory
factory-class="oracle.jdbc.pool.OracleDataSource"
user="scott"
password="tiger"
This configuration has worked well for my web application where I was using a single instance of Oracle database. In a new application I've to use two separate instance of Oracle databases and there is a need of distributed transaction.
I know, I've to create two separate datasources for the two separate Oracle instances.
My question is: Since now my transaction will be distributed in nature, do I need to use any other factory-class for configuring XA aware Datasources on OC4J? Or whether the same factory-class (oracle.jdbc.pool.OracleDataSource) will work even for distributed transactions?Here is the link for using Oracle RAC with WLS
http://e-docs.bea.com/wls/docs81/jdbc/oracle_rac.html -
Error while Installing Oracle Services for Microsoft Transaction Server
I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
Errors in Database Alert Log... Please Help
Hi All,
This database is on Oracle 8i but I found errors in the alert Log.
These errors are relating to archiving.
Please take a look at this file to see the details;
http://us.f13.yahoofs.com/bc/47aff3ab_a145/bc/My+Documents/Database+Alert+Log.LOG?bfUw9sHBkd_LbjY0
ARC0: Beginning to archive log# 11 seq# 301
Wed Feb 13 14:57:45 2008
ARC0: Completed archiving log# 11 seq# 301
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03852.TRC:
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03208.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03340.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA00784.TRC:
Wed Feb 13 15:46:31 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03748.TRC:
Wed Feb 13 15:46:32 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA01228.TRC:
Wed Feb 13 16:18:57 2008
Thread 1 advanced to log sequence 303
Current log# 13 seq# 303 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO13.LOG
Wed Feb 13 16:18:57 2008
ARC2: Beginning to archive log# 12 seq# 302
Wed Feb 13 16:19:25 2008
ARC2: Completed archiving log# 12 seq# 302
Wed Feb 13 18:40:13 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03872.TRC:
Please help out. What is exactly the cause of this error and how can I avoid it next time from occuring.>> Please paste the output of E:\Oracle\admin\MUKREC\udump\ORA03872.TRC
Click on the link below to get the output of the ORA03872.TRC trace file
http://us.f13.yahoofs.com/bc/47aff3ab_a145/bc/My+Documents/ORA03872.TRC?bfMq_sHBSRis64KA
>> and last 100 lines of alert log
the last 100 lines of the alert log are here under;
Wed Feb 13 11:50:27 2008
Thread 1 advanced to log sequence 296
Current log# 13 seq# 296 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO13.LOG
Wed Feb 13 11:50:27 2008
ARC0: Beginning to archive log# 12 seq# 295
Wed Feb 13 11:51:02 2008
ARC0: Completed archiving log# 12 seq# 295
Wed Feb 13 12:27:18 2008
Thread 1 advanced to log sequence 297
Current log# 7 seq# 297 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO07.LOG
Wed Feb 13 12:27:18 2008
ARC0: Beginning to archive log# 13 seq# 296
Wed Feb 13 12:27:59 2008
Thread 1 advanced to log sequence 298
Current log# 8 seq# 298 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO08.LOG
Wed Feb 13 12:27:59 2008
ARC1: Beginning to archive log# 13 seq# 296
ARC1: Failed to archive log# 13 seq# 296
ARC1: Beginning to archive log# 7 seq# 297
Wed Feb 13 12:28:33 2008
Thread 1 advanced to log sequence 299
Current log# 9 seq# 299 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO09.LOG
Wed Feb 13 12:29:10 2008
Thread 1 advanced to log sequence 300
Current log# 10 seq# 300 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO10.LOG
Wed Feb 13 12:29:11 2008
ARC0: Completed archiving log# 13 seq# 296
ARC0: STARTING ARCH PROCESSES
ARC2 started with pid=166
Wed Feb 13 12:29:11 2008
ARC0: STARTING ARCH PROCESSES COMPLETE
Wed Feb 13 12:29:11 2008
ARC0: Beginning to archive log# 7 seq# 297
ARC0: Failed to archive log# 7 seq# 297
ARC0: Beginning to archive log# 8 seq# 298
Wed Feb 13 12:29:12 2008
ARC2: Archival started
Wed Feb 13 12:29:32 2008
ARC1: Completed archiving log# 7 seq# 297
ARC1: Beginning to archive log# 8 seq# 298
ARC1: Failed to archive log# 8 seq# 298
ARC1: Beginning to archive log# 9 seq# 299
Wed Feb 13 12:29:48 2008
ARC0: Completed archiving log# 8 seq# 298
Wed Feb 13 12:29:48 2008
ARC2: Beginning to archive log# 9 seq# 299
ARC2: Failed to archive log# 9 seq# 299
Wed Feb 13 12:30:03 2008
ARC1: Completed archiving log# 9 seq# 299
Wed Feb 13 14:46:05 2008
Thread 1 advanced to log sequence 301
Current log# 11 seq# 301 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO11.LOG
Wed Feb 13 14:46:05 2008
ARC1: Beginning to archive log# 10 seq# 300
Wed Feb 13 14:46:41 2008
ARC1: Completed archiving log# 10 seq# 300
Wed Feb 13 14:57:10 2008
Thread 1 advanced to log sequence 302
Current log# 12 seq# 302 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO12.LOG
Wed Feb 13 14:57:10 2008
ARC0: Beginning to archive log# 11 seq# 301
Wed Feb 13 14:57:45 2008
ARC0: Completed archiving log# 11 seq# 301
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03852.TRC:
Wed Feb 13 15:46:26 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03208.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03340.TRC:
Wed Feb 13 15:46:30 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA00784.TRC:
Wed Feb 13 15:46:31 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03748.TRC:
Wed Feb 13 15:46:32 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA01228.TRC:
Wed Feb 13 16:18:57 2008
Thread 1 advanced to log sequence 303
Current log# 13 seq# 303 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO13.LOG
Wed Feb 13 16:18:57 2008
ARC2: Beginning to archive log# 12 seq# 302
Wed Feb 13 16:19:25 2008
ARC2: Completed archiving log# 12 seq# 302
Wed Feb 13 18:40:13 2008
Errors in file E:\Oracle\admin\MUKREC\udump\ORA03872.TRC:
Thu Feb 14 08:03:54 2008
Thread 1 advanced to log sequence 304
Thu Feb 14 08:03:54 2008
Current log# 7 seq# 304 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO07.LOG
Thu Feb 14 08:03:55 2008
ARC1: Beginning to archive log# 13 seq# 303
Thu Feb 14 08:04:45 2008
ARC1: Completed archiving log# 13 seq# 303
Thu Feb 14 08:24:29 2008
Thread 1 advanced to log sequence 305
Current log# 8 seq# 305 mem# 0: E:\ORACLE\ORADATA\MUKREC\LOGS\REDO08.LOG
Thu Feb 14 08:24:29 2008
ARC0: Beginning to archive log# 7 seq# 304
Thu Feb 14 08:25:01 2008
ARC0: Completed archiving log# 7 seq# 304
------------------------------------------------------------------------------------------------------------------------------------ -
Separate alert log for every day
Hi,
Apart from regular alert_SID_.log file, can i configure alert log something like :
alert_SID_StartDateAndTime_EndDateAndTime.log
I mean can i configure separate aler log for 12.00 AM to 11.59 PM everyday, because :
1.It will easy to have separate alert log; so that if i have to send it i can send.
2.It will record all message in separate file, so that we may know that on which date, what db actions have been performed etc.
Thanks,Satish Kandi wrote:
You could achieve this with a simple cron job, as indicated by CKPT, to rename the existing alert.log to required format.If you please show an exmple, it will help me to understand it
>
On a side note,
1.It will easy to have separate alert log; so that if i have to send it i can send.Where do you need to send the alert log on daily basis?Sometime if client ask it.
How will you send the alert log for last one month, if required? Wouldn't that be simpler with just one file?
Ofcourse, sending one file is easy than many, but many have separate info as well.
2.It will record all message in separate file, so that we may know that on which date, what db actions have been performed etc.Alert log already has a timestamp included, so I don't see how this will benefit you.
Still, if there is dbms_separate_alert_log (assumed new feature for Oracle 12g), i think it may be helpful to us.
Its a general practice to review the alert log on daily basis and keep only the "required" (definition changes per individual) information in the file. Personally, I prefer to have a complete backup of the alert log contents in a separate file and stripped out version of alert log as current one.Currently i am using 10.2.0.1 on windows xp.
Thanks, -
Create custom rule: Looking for ORA errors in the alert log
I would like to create a rule to notify me when ORA errors are generated to the alert log. When I try to create a rule, I seem to only be able to choose from predefined lists. Has anyone configured a rule for this?
Grrr. This is for 10.2 Grid:
Go to databases --> select your database
Under Diagnostic summary, you'll see:
Alert Log 28-Dec-2006 09:19:48
The date part is a clickable link, click on it. Scroll to the bootom of the next page and click on:
"Generic Alert Log Error Monitoring Configuration"
Now read the page very carefully, its all self explanatory. The reason who haven't had some errors reported is because of that filter. Now set it up the way you want it.
Good luck
Bazzza
Maybe you are looking for
-
Boot Camp will not let me install Windows via external hard drive
Hi, I'm having problems installing Windows 7 on my MacBook Pro. I have the iso file on my external hard dirve and have went to Boot Camp but the following message comes up: "The startup disk cannot be partitioned or restored to a single partition. Th
-
Error in finding the phase and magnitude of the acquired signal
Dear sir, I am trying to develop a module for calculating unbalance in the spindle . I am using an accelerometer and tacho for that. Till the last part in my vi I am getting the output properly but in final stage while finding the pha
-
Hi all, I am having problem when use the command INCLUDE with extension PARAGRAPH. When use in environment DEV the standard text is written using the definitions of paragraphs it informed in the command. I carried to PRD and the standard text is not
-
With iOS5 my contacts are all duplicated
I've just upgraded to iOS 5 on my iPad 2 and everything generally seems to have gone well, other than with my contacts. They are synced via iTunes with Outlook 2007 but although the groups are only displayed once, the individual contacts within each
-
Error opening url 'file ///undefined'
Hey everyone. I'm new to actionscript and I'm having some issues. Here is my code: function onFinish(success_boolean, results_obj, xml) if (success_boolean) play (); } // end if } // End of the function Stage.align = "MC"; Stage.scale