Errors in Virtual interface after editing application service

Hi all,
I have an external service in CAF which connects to the backend to an RFC.
This external service is being used by an application service.
I recently added an extra import parameter to the RFC in the backend. So in CAF I deleted my old external service and imported the
RFC again with the correct import parameters.
In the Application Service I added an extra import parameter to the input node of the corresponding operations in which the external service is being used. And I inserted a line of code to fill in the correct value in the import parameter.
After doing this and saving the CAF project a lot of errors are being generated in the ejbmodule of the caf project. (in the Virtual Interface files <servicename>.videf)
Errors like:
Type com.spe.portal.foa_serv.appsrv.datatypes.AddressDS of field addressDS0 in type com.spe.portal.foa_serv.appsrv.datatypes.BPartnerLightDS_R has been exchanged by type com.spe.portal.foa_serv.appsrv.datatypes.AddressDS_R
These errors even occur in the VIs of the services that I didn't change.
Can somebody tell me what the Virtual interface is for and why they are throwing these errors,
Thanks
Kr
Wouter

Hi Wouter,
A virtual interface ia actuallly a xml-file with a description of all the operations and fields of de webservice.
To solve your problems: go to the navigator view, select the <CAFname>EJB project, navigate to the <servicename> folder under the ejbModule folder.
Open the wsdef file with the WSD editor and push the button Edit VI....
Remove the operations under <servicename>Bean and add them again using the buttons below the pane.
Save and rebuild your work and everything should be ok.
Hope this helps.
Regards,
Alain

Similar Messages

There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

Error in executing RFC or CAF Application Service

Hello Everybody,
I am creating course approval process, in which I am calling RFC for user info and after course approval, calling CAF application service to persist this data.
But, both services are not working in process. I have tested callable objects for these services and tested successfully.
But, when I am attaching it in the process then process can't go forward from this point.
I have checked in Log viewer and found following error:
Path to object does not exist at com.sap.caf.eu.gp.model.pfw.local, the whole lookup name is sap.com/com.sap.caf.eu.gp.model.pfw.local/GPUWLBridge.
What should be the problem in this?
If I remove these services then whole process works fine.
Thanks in advance,
Bhavik

Hello All,
Is there any concept like, I call perticular backgound object first time then I cannot call that object for some period of time?
I am getting same error in calling RFC callable object as well as CAF service callable object.
I can execute these callable objects in the process first time successfully. But, When I execute this process second time, these callable objects won't execute.
I can execute same process after 3 to 4 hours successfully once.
What should be the reason behind this?

ICal Error: "No virtual host found for iCal Service" - Help!

Trying to set up iCal on OS X Server 10.5.6
Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
When I click on 'start service' for iCal, I get this error.
"No virtual host found for iCal service"
I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
Would be most grateful.

Hey there,
See if any of the solutions provided in either of these older threads can steer you in the right direction.
http://discussions.apple.com/thread.jspa?threadID=1201737
http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
B-rock

Jumbled text in web interface after updating Web Services / firmware

I got a message on the screen of my Officejet 6700:
Update Recommended
An update is available for Web Services (ePrint and Apps).
Do you want to proceed?
I selected Update Now, and it installed fine, or so I thought.
I checked the web interface for the printer, and find there is a bunch of jumbled text, like the code is messed up for the web server.
I had just finished checking the status of ink cartridges (and subsequently replaced one), therefore I fortunately still have the fully functioning webpage open on another machine, so I can tell exactly what the before-and-after is on that one page.
On the Tools > Ink Gauge page, on the good (old) page the table says (title, first row, first column):
Installed Cartridges
Color | Magenta | Cyan | Yellow | Black
Part Number
Type
End-of-Warranty Date (Y-M-D)
First Installation Date (Y-M-D)
Ink Zone
USE
HP
But after updating the software, it says this:
Print Self Test Page
L@S#0456 | Number of Logged Events | L@S#0462 | L@S#0552 | L@S#0450
Accumulated Media Usage
Date
L@S#0477
L@S#0561
L@S#3345
Also, the "Order Supplies" link, with a popup text of "Order printing supplies"
now says "Ink Cartridge", with a popup text of 'Block unwanted faxes"
And "Print Printer Status Report" now says "L@S#2567".
I went to the support section, and found a firmware update, but upon downloading and running it, upon finding the printer, it says it is already Up-to-date, and won't let me select it to try and re-apply the firmware update (as that's evidently what going through the touchscreen menu has already done).
Do I need to just restore to factory settings? I would think firmware wouldn't be changed by doing that. There isn't an old version of the firmware available on the product support page, to revert to an older version.
Via the printer touchscreen menu, a printed Printer Status Report says the firmware version is MPM3CN1322DR.
How do I force a re-install of the firmware, or get them to fix the firmware that was published on 2013-06-25?
This question was solved.
View Solution.

michaelprang,
You are unable to revert back or reinstall the firmware since it has already been downloaded and updated.
Have you attempted to use a different web browser?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

FM errors for certain tasks after restoring application

Hi All,
We had to move our Oracle database to a new server due to memory issues.
We took an export of the HFM tablespace and restored in into the newly created tablespace.
The HFM app works fine except for some features:
1 - Under Workspaces, when opening a document we get: "The specified security call does not exist. Error reference number: {AE3F0A36-427D-407B-...};Username: admin@native Directory <BR>Num: 0x8004021c etc...
2 - Under Tasks\Administration\ Task Audit we get: The User ID was not found.
All other features appear to work correctly. We are on System 9.2.
Does anyone know why only certain features dont seem to work? I have tried re-registering the app to no avail.
Thanks for your help.
Regards,
Seb

Sounds like some things gone wrong/out of sync with your HSV_Activity tables.
One possibility in the case of Task Audit Error:
The appname_TASK_AUDIT table contains the field ActivityUserID. When you call the Audit Log the ActivityUserID is matched to the user name in the HSV_ACTIVITY_USERS table, If there are IDs existing in the Audit log that do not match or have changed in the USERS table then you will get a similar error. So If the old db does not get the same problem maybe a check of the tables contents would be in order.
So I would start by generating the error User ID was not found and clicking on more details, that will probably give you the userid that has the problem. Then you could check the Audit log and match the user ID thats displayed in the error message to the user id that is listed in the HSV_ACTIVITY_USERS table.
The Workspace error is probably related.
Depending on what you find you may need to check all your moved tables are valid and that all data was moved.

ABAP Web service - Virtual Interface Not Found

Hi,
I have created a ABAP web service based on RFC. I changed the authentication to "Basic username/password" from SOAMANAGER. Also tested the web service from WSNAVIGATOR (of different portal) using WSDL url. Web service successfully returned response.
Now, I have a AJAX client where I have hardcoded the request (from wsnavigator) and trying to call this web service in SAP BW web template (from HTML/JavaScript). But its not giving error as "Virtual Interface Not Found". Also, i get 500 error. But the end point of the web service if looked up from browser gives response. The SICF service is active and upon tests gives valid response.
Found couple of discussions regarding this:
http://wiki.sdn.sap.com/wiki/display/VC/VirtualInterfacenotfounderror
But i'm not finding the setting to activate virtual interface in SE80. ALso, we have created many such web services and they used to work fine prior to upgrade to Ehp1 SP05 (BI) but the newly created web service is not working.
Any inputs?
Abhijeet

Hi can you please let me know how you resolved this issue?

[wscompile] error: invalid remote interface

I have an interface I want to publish as a web service. This interface extends java.rmi.Remote and each of its methods throws a RemoteException. But when I run wscompile (via ant) against this interface in order to have the wsdl file generated it gives me:
error: invalid remote interface; class manplan.j2ee.service.project.ProjectManager is not an interfacee
I have searched the forum and the internet yet could not find an answer. Any hints are most welcome. Below you will find excerpts from the relevant files.
Cheers,
Olaf
[interface]
public interface ProjectManager extends java.rmi.Remote
     void createProject(final Project project) throws DuplicateProjectException,
               ProjectManagementRuntimeException, RemoteException;
[ant]
<wscompile
     keep="true"
     define="true"
     base="${ws.build.classes.dir}"
     xPrintStackTrace="true"
     verbose="true"
     model="${ws.build.dir}/${ws.model.rpcenc.file}"
     config="${ws.conf.rpcenc.file}">
     <classpath>
          <path refid="ws.class.path"/>
     </classpath>
</wscompile>
[interface-config.xml]
<configuration
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<service
name="ProjectManagementService"
targetNamespace="urn:manplan:Services"
typeNamespace="urn:manplan:Types"
packageName="manplan.j2ee.webservice">
<interface name="manplan.j2ee.service.project.ProjectManager"/>
</service>
</configuration>

OK. Found it: unlike Axis' java2wsdl does wscompile not support JavaBeans and so it gets confused by all those Project params and return types. So I guess wscompile is not the right tool for me in this situation?
Cheers,
Olaf

No virtual host found for iCal service

Hi all,
I recently created a link aggregation for our xserve, in doing this i needed to demote my open directory to standalone and then promote it back to master (archive and install users).
In doing this it appears that iCal has spat the dummy, in that our users could not connect. I turned iCal off and on in the hope that this correct it, however when trying to turn back on I get the error "No virtual host found for iCal service..."
Check host name reveals that names match.
Any ideas guys, I'm happy to fully restart iCal (events are backed up), however I can't even get it started yet!
Thanks,
Nige

Hi
+". . . ours is a standalone server with Open Directory off . . ."+
http://manuals.info.apple.com/enUS/iCal_Service_Admin_v10.5_2ndEd.pdf
Page 13 - Minimum Requirements. As ever how well it all works will come down to how you've configured DNS Services. Get that bit right and everything else will follow.
Tony

To run an application on iAS6sp1 on HP-Unix, while starting the kjs from command line, it gives a GDS error and crashes. Subsequently, after stopping all services and restarting iAS wouldnot come up.

Hi,
Not a problem, please post the KJS error logs for me to hunt the
exact reason for the error.
Thanks & Regards
Raj
Neel John wrote:
To run an application on iAS6sp1 on HP-Unix, while starting the kjs
from command line, it gives a GDS error and crashes. Subsequently,
after stopping all services and restarting iAS wouldnot come up.
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Object null reference error while creating Web applications, Service applications etc after restoring AD accounts

Hi,
The old Active Directory accounts of my server were removed, those accounts are used by some of the SharePoint sites. A new AD account was created and when I try to replace the old accounts with new I am facing issue. I am also unable to create new web application,
service application from my Central Administration. I also tried by restoring old accounts but still I am facing same issues, I
am getting the error message Object
reference not set to an instance of an object. for any create activities in Central Administration.
Thanks in Advance for your help

Thanks for the reply. When I am trying to update service account of services also I am getting error
message Object
reference not set to an instance of an object. i.e., while selecting component(web/service application from drop down) redirecting to error page

Excel service and OWA - getting ERROR while trying to open/edit Excel documents

Hi All,
We have configured SharePoint 2013 with Excel Service and OWA (Office Web Apps).
After configuring, we are able to view/edit Word or PowerPoint documents from the browser (as OWA is configured). But we are getting errors while trying to open/edit Excel documents.
We are not able to view/edit the excel workbook from the browser (through OWA).
To open the excel in the browser, decision has to be taken at the farm level on what to be used – Excel Service or OWA Server? Is it possible to do setting at site collection level?
Error details are given below:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/25/2013 1:29:08 PM
Event time (UTC): 3/25/2013 7:59:08 AM
Event ID: fc2e0530f493493896e6c8b6297a0423
Event sequence: 10
Event occurrence: 3
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/2/ROOT/x-1-130086717598089315
    Trust level: Full
    Application Virtual Path: /x
    Application Path: C:\Program Files\Microsoft Office Web Apps\ExcelServicesWfe\
    Machine name: VHYDMANTHSTP-02
Process information:
    Process ID: 1252
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: ArgumentException
    Exception message: An entry with the same key already exists.
   at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
    Request URL:
http://mysrevr/x/_layouts/xlpreview.aspx?ui=en-US&rs=en-US&WOPISrc=http://myservernames1/_vti_bin/wopi.ashx/files/f36d669ceb814d67bdad0e1e1f98e466&wdSmallView=1
    Request path: /x/_layouts/xlpreview.aspx
    User host address: 10.81.138.92
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 13
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Collections.Generic.TreeSet`1.AddIfNotPresent(T item)
   at System.Collections.Generic.SortedDictionary`2..ctor(IDictionary`2 dictionary, IComparer`1 comparer)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.GetInstalledUICultures()
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.IsUICultureSupported(String cultureTag, CultureInfo& cultureInfo)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICulture(String cultureTag, Boolean useOleo, Boolean allowCustomFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentUICultureFromFrontEnd(String uiCultureTag, Boolean allowFallback)
   at Microsoft.Office.Excel.Server.ExcelServerRegionalSettings.SafeSetCurrentCulturesFromFrontEnd(String uiCultureTag, String dataCultureTag)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.SetCurrentCulturesFromContext(HttpContext context)
   at Microsoft.Office.Excel.Server.ServiceHost.ServiceHost.Microsoft.Office.Excel.Server.Host.IEwaHost.PreProcessRequest(HttpContext context)
   at Microsoft.Office.Excel.WebUI.XlPreview.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

I have the same issue while opening the file , i have checked every thing twice. but unable to fix this thing . can any one help.
One more thing which is i am wondering none of the MS representative replied on this post which is originally posted on March 27-2013.
is microsoft alive??
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Sql Server Web Edition Reporting Services errors when trying to connect to Windows Azure SQL

I am using a preconfigured image from the Azure VM Gallery to create a VM.
--> Sql Server 2012 SP1 Web running under Windows Server 2008 R2
After configuring Reporting Services I get the following error when trying to run a report that connects to my Azure SQL db.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'SQLAZURE' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
On the VM using SSMS I can connect to the Azure SQL db. On the VM in Report Builder when I define a connection I get a similar error to the one above when I test that connection. I am using Microsoft Azure SQL as the data source type.
Interestingly in Report Builder, if I proceed past the connection definition, I can see the tables from my Azure SQL db in the dataset definition page.
One more note. If I use a different image from the Gallery (Sql Server 2012 Standard SP1 on Windows Server 2012) my report builder connection works and the reports run fine. I believe that the Azure documentation says that Sql Server Web edition
is an acceptable choice for the SSRS on VM for reporting.
Any thoughts or suggestions?
Thanks -- Tom Reilly

Hello,
A VM with SQL Server 2008 R2 or 2012 supports all Reporting Services features, including all supported data sources, customization and extensibility, and scheduled report execution and delivery.
Did you run the report in Report Manager,or preview the report in Report Builder? Which version of the Report Builder you installed in the Windows Azure VM? SQL Reporting does not support reports created from Report Builder 1.0 or 2.0. You can create reports
using Report Builder 3.0 and then upload the reports.
What's more, please also check the database source credential of the report.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Prime infrastructure 2.0 - Inventory error with Virtual-Access Interface

Hi,
We have recently been trying to resolve a few issues with routers which get partial inventory failures upon discovery. I have managed to narrow this down slightly with the help of the inventory.log file. (With help from this post https://supportforums.cisco.com/thread/2255346 ) I have found the following happnes when this device is added:
[2014-03-04 14:00:27,537] [ICE Service[ 1]Thread: 29] [inventory] [ERROR] - 172.16.3.202 Object detected as SAME but DB Object obtained from the database is NULL For instance id: 0 For generated POJO: PPPEncapsulation[callBack=false,callIn=false,callOut=false,multilink=false,name=Virtual-Access1,oneTime=false,owningEntityId=69757688_172.16.3.202,preferedAuthType=NONE,deployPending=NONE,name=Virtual-Access1,owningEntityId=69757688_172.16.3.202,instanceId=0,_orderedListOEIndex=<Integer>,_creationOrderIndex=<Integer>,instanceVersion=0]
I have highlighted above where it mentions the problem with the virtual access interface. The configuration on the router is for PPPoE and the virtual-access1 interface is bound to Dialer0.
It then goes on to roll back the transaction:
172.16.3.202 persistObjects called with addList size = 307, updateList size = 6
172.16.3.202 Exception while persisting: com.cisco.xmp.persistence.common.util.DMMCRUDException:,message=errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Exception occured while inventory collection for device with id 69757688: com.cisco.xmp.inventory.ice.InventoryException: errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Done with collection. Total call method time: 15308
172.16.3.202 Rolling back the transaction
Has anyone else come accross this issue?
I have attched the log showing just messages from this device.
Thanks,
Mike.

TAC and I found a bug, CSCum05301.
May be that is also helpfull for others.
https://tools.cisco.com/bugsearch/bug/CSCum05301/
Symptom:
Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
Following error message is visible on the DWC:
Inventory Collection Status: Partial Collection Failure
Collection Status Failed feature(s)
Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
Conditions:
Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
For example:
interface FastEthernet0/3
description 10Mbps
Workaround:
Use a space character between number and unit keyword, like 1 Gbps.

APEX 4 - Edit Application Properties - Apply Changes - Error

This has seemed to have started after upgrading to Apex 4. We also updated to 4.0.1, and are still having the problem. With any application, if we attempt to apply changes to the application definition it fails...
Home>Application Builder>Application 104>Shared Components>Edit Application, Defintiion tab. Make a change, then click 'Apply Changes' The browser returns a 404 error. In fact, we don't have to make a change to the values displayed. Just attempting to apply the existing values fails.
This is the error we receive in the ohs.log...
[2010-08-31T19:48:35.2479-05:00] [OHS] [ERROR:32] [OHS-9999] [mod_context.c] [host_id: hostname] [host_addr: xxx.xxx.xxx.xxx] [tid: 19] [user: username] [ecid: 004ZmWEhjJ35yW8C3jMMOz0001Lr0004y3] [rid: 0] [VirtualHost: main] MODPLSQL-00261: mod_plsql: /pls/apex/wwv_flow.accept HTTP-404 Failed to execute target procedure ORA-00604: error occurred at recursive SQL level 1\nORA-06502: PL/SQL: numeric or value error: character string buffer too small\nORA-06512: at line 10\nORA-06550: line 35, column 3:\nPLS-00306: wrong number or types of arguments in call to 'ACCEPT'\nORA-06550: line 35, column 3:\nPL/SQL: Statement ignored\n, referer: http://hostname:xxxx/pls/apex/f?p=4000:4001:3485056460649030::NO::FB_FLOW_ID:104
We're unable to find any cause for the error. Any help would be appreciated.
Thanks!

Yes, we still have the logs. No errors from the install or patch to 4.0.1. All packages, procedures, functions are valid.
And, I just found the problem. We had an 'after servererror on database' trigger enabled without the proper field checks. Disabled the trigger, problem solved.
Thanks for the help!

Errors in Virtual interface after editing application service

Similar Messages

Maybe you are looking for