Errors ORA-01115 ORA-17507 ORA-01410
Hi i was using Oracle Data Integrator for loading data from one database to another, i programmed a package that loads data with a cycle in monthly intervals, it rans ok the first ten months since 2007/11 but then i got this errors
java.sql.SQLException: ORA-01115: IO error reading block from file 286 (block # 184745)
ORA-17507: I/O request size is not a multiple of logical block size
ORA-01410: invalid ROWID
Does anyone have any idea why this happened?.
oracle error ORA-01115
1. Try to assess the cause and extent of the problem.
Examine the alert.log file for this instance. Scan the last few
days' entries for other occurrences of ORA-01115. If you find them,
A) Do they reference files in different disks?
If so, it is likely that there you have controller problems.
Move on to Scenario II.A below.
B) Do they reference different files in the same disk?
If so, it is likely that there are problems with that disk.
Move on to Scenario II.B below.
C) Do they always reference the same datafile?
If so, it is likely that the datafile contains bad blocks.
Move on to Scenario II.C below. If the file is bigger
than 2GB and you are running 7.1.4 or lower on a Solaris
platform, see Scenario II.D below.
D) If none of the above applies, move on to Step 2.
2. If the datafile is in the SYSTEM tablespace, or the database is in
NOARCHIVELOG mode, shut the database down. Move on to Step 4.
If shutdown immediate fails, do a shutdown abort.
3. If the database is in ARCHIVELOG mode, you should still shut the
database down. If the database cannot be shut down, offline the
datafile.
ALTER DATABASE DATAFILE '<full_path_file_name>' OFFLINE;
4. Try to copy the datafile to another disk (managed by a different
controller, if possible).
5. If the copy fails, even after you retry, the datafile must be considered
lost at this point. The next action depends on the tablespace to
which the lost file belongs. See the following Solution References to
PR entries, according to the different types of tablespaces,
for instructions on how to proceed.
IMPORTANT: While going through the references below, keep in mind that
if you restore the datafile from backup, you need to place it in another
disk, preferably under a different controller, and rename it inside Oracle
(see Note 115424.1 for details). If you recreate any tablespace, make
sure its datafiles are created in another disk, preferably under a
different controller.
Reference for Lost datafile scenarios : Note 198640.1
6. If the database is down, mount it.
7. Rename the datafile that you succeeded in copying inside Oracle.
ALTER DATABASE RENAME FILE '<old_full_path_file_name>'
TO '<new_full_path_file_name>';
8. If the database is mounted, open it. If you offlined the datafile,
perform media recovery on it, and then bring it online.
RECOVER DATAFILE '<full_path_file_name>';
ALTER DATABASE DATAFILE '<full_path_file_name>' ONLINE;
Similar Messages
-
ORA -01115 error in db13 checkdb
Hi expert ,
i am new to this fouram i have ora-01115 error in sap oracle 9i database ,
Please help me to solve the problem .
I am using ECC 5.0 ,win2k3 enterprise edition ,Oracle 9i
could anybody explain me what the relation of oracle block segment ,and windows block segment .
Could i solve the problem without reinstalling sap .
<b>Please explain me in detail following paragraph ,which i read ,</b>
<b>a corrupted database due the auto extended bug
Corrupt block dba: 0x24024cd0 file=5. blocknum=150736.
found during buffer read on disk type:0. ver.
dba:0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
Entire contents of block is zero - block never written
Reread of block=24024cd0 file=9. blocknum=150736. found same corupted Data
Mishandled block information (in certain conditions), upon reading the database block, which indicates that a good block is corrupted. This is the bug in the Oracle version 8.1.x - 9.x, where the Oracle will raise the error:
ORA-600 [kcoapl_blkchk][ABN][RFN][INT CODE]
Pointing to failure condition during block check. This only happens when block checking is enabled.
A problem with a faulty database trigger operation, causing data block corruptions
ORA-01115: IO error reading block from file 6 (block # 14873)
ORA-01110: data file 6: '/oracle/artist/artist01.dbf'
ORA-27091: skgfqio: unable to queue I/O
IBM AIX RISC System/6000 Error: 9: Bad file number</b>
Thanx & Regards
RohitKHi experts ,
Regarding ORA 0600 ,the error which i found in db13 of 000,pls guide me in details as i am fresher basis consultant working in production enviorment.
I am pasting the check db log in db13 ,pls guide me if any problem is found.
Note that
1) i run sick tcode which shows no error report in the system .
2)I have configured stms ,
3)imported profiles from rz10 tcode from os level to sap level .
4)Created new client logged and doing local client copy but it cancelled every times .
In scc3 log it show different errors ,in sm21 log it show diffrerent errors .
It does not show ora 600 error anywhere in the logs ,but when i tried to check consistency of database through CHECKDB it show ora -600 error .
Hi experts pls tell me if required sm21 and and scc3 logs
<b>CHECK DB LOG OF DB13</b>
Detail log: cdwnjhor.chk
BR0801I BRCONNECT 6.40 (15)
BR0477I Oracle pfile D:\oracle\ora92\database\initDEV.ora created from spfile D:\oracle\ora92\database\spfileDEV.ora
BR0805I Start of BRCONNECT processing: cdwnjhor.chk 2007-11-05 11.16.25
BR0101I Parameters
Name Value
oracle_sid DEV
oracle_home D:\oracle\ora92
oracle_profile D:\oracle\ora92\database\initDEV.ora
sapdata_home D:\oracle\DEV
sap_profile D:\oracle\ora92\database\initDEV.sap
system_info SAPServiceDEV DSERVER Windows 5.2 Build 3790 Intel
oracle_info DEV 9.2.0.1.0 8192 630 3626441
sap_info 640 SAPDEV DEV TEMPLICENSE R3_ORA INITIAL
make_info NTintel OCI_920_SHARE Oct 12 2004
command_line brconnect -u / -c -f check
alert_log D:\oracle\DEV\saptrace\background\alert_dev.log
BR0280I BRCONNECT time stamp: 2007-11-05 11.17.25
BR0813I Schema owners found in database DEV: DBSNMP, OPS$DSERVER\DEVADM, OPS$DSERVER\SAPSERVICEDEV, OUTLN, SAPDEV*, SYS, SYSTEM
BR0118I Tablespaces and data files
Tablespace Status File Status Id. Size Device Type Link
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA3\DEV_1\DEV.DATA1 ONLINE+ 3 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA3\DEV_2\DEV.DATA2 ONLINE+ 4 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA3\DEV_3\DEV.DATA3 ONLINE+ 5 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA3\DEV_4\DEV.DATA4 ONLINE+ 6 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA3\DEV_5\DEV.DATA5 ONLINE+ 7 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_10\DEV.DATA10 ONLINE+ 12 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_11\DEV.DATA11 ONLINE+ 27 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_12\DEV.DATA12 ONLINE+ 28 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_13\DEV.DATA13 ONLINE+ 29 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_14\DEV.DATA14 ONLINE+ 30 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_6\DEV.DATA6 ONLINE+ 8 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_7\DEV.DATA7 ONLINE+ 9 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_8\DEV.DATA8 ONLINE+ 10 2097160192 3 FILE NOLINK
PSAPDEV ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV_9\DEV.DATA9 ONLINE+ 11 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA1\DEV640_1\DEV640.DATA1 ONLINE+ 13 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA1\DEV640_2\DEV640.DATA2 ONLINE+ 14 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA1\DEV640_3\DEV640.DATA3 ONLINE+ 15 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA1\DEV640_4\DEV640.DATA4 ONLINE+ 16 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA1\DEV640_5\DEV640.DATA5 ONLINE+ 17 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA2\DEV640_10\DEV640.DATA10 ONLINE+ 22 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA2\DEV640_6\DEV640.DATA6 ONLINE+ 18 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA2\DEV640_7\DEV640.DATA7 ONLINE+ 19 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA2\DEV640_8\DEV640.DATA8 ONLINE+ 20 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA2\DEV640_9\DEV640.DATA9 ONLINE+ 21 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA3\DEV640_11\DEV640.DATA11 ONLINE+ 23 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV640_12\DEV640.DATA12 ONLINE+ 24 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV640_13\DEV640.DATA13 ONLINE+ 25 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV640_14\DEV640.DATA14 ONLINE+ 31 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV640_15\DEV640.DATA15 ONLINE+ 32 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV640_16\DEV640.DATA16 ONLINE+ 33 2097160192 3 FILE NOLINK
PSAPDEV640 ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEV640_17\DEV640.DATA17 ONLINE+ 34 2097160192 3 FILE NOLINK
PSAPDEVUSR ONLINE+ D:\ORACLE\DEV\SAPDATA4\DEVUSR_1\DEVUSR.DATA1 ONLINE+ 26 20979712 3 FILE NOLINK
PSAPTEMP ONLINE# D:\ORACLE\DEV\SAPDATA1\TEMP_1\TEMP.DATA1 ONLINE+ -1 702554112 3 FILE NOLINK
PSAPUNDO ONLINE- D:\ORACLE\DEV\SAPDATA1\UNDO_1\UNDO.DATA1 ONLINE+ 2 2915049472 3 FILE NOLINK
PSAPUNDO ONLINE- D:\ORACLE\DEV\SAPDATA1\UNDO_2\UNDO.DATA2 ONLINE 39 2915049472 3 FILE NOLINK
PSAPUNDO ONLINE- D:\ORACLE\DEV\SAPDATA1\UNDO_3\UNDO.DATA3 ONLINE 40 2915049472 3 FILE NOLINK
PSAPUNDO ONLINE- D:\ORACLE\DEV\SAPDATA1\UNDO_4\UNDO.DATA4 ONLINE 41 2915049472 3 FILE NOLINK
PSAPUNDO ONLINE- D:\ORACLE\DEV\SAPDATA1\UNDO_5\UNDO.DATA5 ONLINE 42 2915049472 3 FILE NOLINK
SYSTEM ONLINE+ D:\ORACLE\DEV\SAPDATA1\SYSTEM_1\SYSTEM.DATA1 SYSTEM+ 1 555753472 3 FILE NOLINK
SYSTEM ONLINE+ D:\ORACLE\DEV\SAPDATA1\SYSTEM_2\SYSTEM.DATA2 SYSTEM+ 35 555753472 3 FILE NOLINK
SYSTEM ONLINE+ D:\ORACLE\DEV\SAPDATA1\SYSTEM_3\SYSTEM.DATA3 SYSTEM+ 36 555753472 3 FILE NOLINK
SYSTEM ONLINE+ D:\ORACLE\DEV\SAPDATA1\SYSTEM_4\SYSTEM.DATA4 SYSTEM+ 37 555753472 3 FILE NOLINK
SYSTEM ONLINE+ D:\ORACLE\DEV\SAPDATA1\SYSTEM_5\SYSTEM.DATA5 SYSTEM+ 38 555753472 3 FILE NOLINK
BR0119I Redo log files
File Status Group Size Device Type Link
D:\ORACLE\DEV\ORIGLOGA\LOG_G11M1.DBF INUSE 1 52429312 3 FILE NOLINK
D:\ORACLE\DEV\MIRRLOGA\LOG_G11M2.DBF INUSE 1 52429312 3 FILE NOLINK
D:\ORACLE\DEV\ORIGLOGB\LOG_G12M1.DBF INUSE 2 52429312 3 FILE NOLINK
D:\ORACLE\DEV\MIRRLOGB\LOG_G12M2.DBF INUSE 2 52429312 3 FILE NOLINK
D:\ORACLE\DEV\ORIGLOGA\LOG_G13M1.DBF INUSE 3 52429312 3 FILE NOLINK
D:\ORACLE\DEV\MIRRLOGA\LOG_G13M2.DBF INUSE 3 52429312 3 FILE NOLINK
D:\ORACLE\DEV\ORIGLOGB\LOG_G14M1.DBF INUSE 4 52429312 3 FILE NOLINK
D:\ORACLE\DEV\MIRRLOGB\LOG_G14M2.DBF INUSE 4 52429312 3 FILE NOLINK
BR0120I Control files
File Size Device Type Link
D:\ORACLE\DEV\ORIGLOGA\CNTRL\CNTRLDEV.DBF 6791168 3 FILE NOLINK
D:\ORACLE\DEV\SAPDATA1\SYSTEM_1\CNTRL\CNTRLDEV.DBF 6791168 3 FILE NOLINK
D:\ORACLE\DEV\SAPARCH\CNTRL\CNTRLDEV.DBF 6791168 3 FILE NOLINK
BR0982I Database disk volumes
Directory / Raw disk Device Total[KB] Free[KB] Used[%]
D:\oracle\ora92 3 204804620 119569600 41.62
D:\oracle\DEV 3 204804620 119569600 41.62
D:\ORACLE\DEV\MIRRLOGA 3 204804620 119569600 41.62
D:\ORACLE\DEV\MIRRLOGB 3 204804620 119569600 41.62
D:\ORACLE\DEV\ORIGLOGA 3 204804620 119569600 41.62
D:\ORACLE\DEV\ORIGLOGB 3 204804620 119569600 41.62
D:\ORACLE\DEV\SAPARCH 3 204804620 119569600 41.62
D:\ORACLE\DEV\SAPDATA1 3 204804620 119569600 41.62
D:\ORACLE\DEV\SAPDATA1\SYSTEM_1\CNTRL 3 204804620 119569600 41.62
D:\ORACLE\DEV\SAPDATA2 3 204804620 119569600 41.62
D:\ORACLE\DEV\SAPDATA3 3 204804620 119569600 41.62
D:\ORACLE\DEV\SAPDATA4 3 204804620 119569600 41.62
D:\oracle\DEV\saparch 3 204804620 119569592 41.62
D:\oracle\DEV\sapbackup 3 204804620 119569592 41.62
D:\oracle\DEV\sapcheck 3 204804620 119569592 41.62
D:\oracle\DEV\sapreorg 3 204804620 119569592 41.62
D:\oracle\DEV\saptrace 3 204804620 119569592 41.62
BR0280I BRCONNECT time stamp: 2007-11-05 11.17.42
BR0814I Number of tables in schema of owner SAPDEV: 43103
BR0836I Number of info cube tables found for owner SAPDEV: 49
BR0814I Number of tables in schema of owner SYS: 292
BR0814I Number of tables/partitions in schema of owner SYSTEM: 128/27
BR0280I BRCONNECT time stamp: 2007-11-05 11.17.53
BR0815I Number of indexes in schema of owner SAPDEV: 51463
BR0815I Number of indexes in schema of owner SYS: 289
BR0815I Number of indexes/partitions in schema of owner SYSTEM: 157/24
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.18
BR0816I Number of segments in schema of owner OPS$DSERVER\DEVADM: 1
BR0816I Number of segments in schema of owner OUTLN: 6
BR0816I Number of segments/LOBs in schema of owner SAPDEV: 95252/343
BR0816I Number of segments/LOBs in schema of owner SYS: 645/22
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 327/21
BR0983I Tablespace fragmentation
Tablespace Files Tables Indexes Extents Total[KB] Used[%] Free[KB] Extents MaxSize[KB] Used[%] Free[KB] Largest[KB]
PSAPDEV 14 42821 51075 111312 28672000 66.98 9466880 7 143360000+ 13.40+ 124154880+ 8192000:8192000:8192000:8192000:8192000+
PSAPDEV640 17 273 378 8401 34816000 70.91 10128448 13 154378240+ 15.99+ 129690688+ 8192000:8192000:8192000:8192000:8192000+
PSAPDEVUSR 1 9 10 19 20480 6.25 19200 1 10240000+ 0.01+ 10238720+ 10219520+:19200:0:0:0
PSAPTEMP 1 0 0 1 686080 36.72 434176 1 10240000+ 2.46+ 9988096+ 9553920+:434176:0:0:0
PSAPUNDO 5 0 0 1066 14233600 20.49 11316928 5 21626880+ 13.49+ 18710208+ 7393280+:2846656:2846656:2830272:2781120
SYSTEM 5 393 422 2107 2713600 19.95 2172352 5 51200000+ 1.06+ 50658752+ 9697280:9697280:9697280:9697280:9697280+
Total: 43 43496 51885 122906 81141760 58.67 33537984 32 391045120 12.17 343441344 53248000:29381312:28927936:28911552:28862400
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.18
BR0818I Number of tables found in DBDIFF for owner SAPDEV: 2
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.19
BR0818I Number of tables found in DBSTATC for owner SAPDEV: 403
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.26
BR0819I Number of pool and cluster tables found in DDNTT for owner SAPDEV: 169
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.26
BR0961I Number of conditions found in DBCHECKORA: 70
BR0962I Check conditions for database administration:
Pos. Act. Lev. Condition Object
Description
1 Y W ARCHIVER_STUCK
Out of space in archive directory - more than 90% space used
2 Y E CONTROL_FILE_MIRROR
Control file not mirrored
3 Y E CONTROL_FILE_MISSING
Control file missing on disk
4 Y W CRITICAL_FILE
File autoextend can cause file system overflow
5 Y W CRITICAL_SEGMENT
Segment can cause tablespace overflow - by allocating up to 2 next extent(s)
6 Y E DATA_FILE_MISMATCH
Data file marked as missing in control file
7 Y E DATA_FILE_MISSING
Data file missing on disk
8 Y E FILE_OFFLINE
Database file offline
9 Y W FILE_SYSTEM_FULL
File system full - more than 99% space used
10 Y E HARMFUL_STATISTICS
Table or index has harmful optimizer statistics
11 Y E INVALID_FILE_TYPE
Invalid operating system file type
12 Y W IN_WRONG_TABLESPACE
Table or index in wrong tablespace
13 Y E MISSING_INDEX
Table has no index
14 Y E MISSING_STATISTICS
Table or index has no optimizer statistics
15 Y E NOARCHIVELOG_MODE
Database in NOARCHIVELOG mode
16 Y W PCTINCREASE_NOT_ZERO
PCTINCREASE value not equal zero
17 Y E REDOLOG_FILE_MIRROR
Redo log file not mirrored
18 Y E REDOLOG_FILE_MISSING
Redo log file missing on disk
19 Y W TABLESPACE_FULL
Tablespace full - more than 95% space used
20 Y W TABLESPACE_IN_BACKUP
Tablespace in backup mode
21 Y E TABLESPACE_OFFLINE
Tablespace offline
22 Y W TOO_MANY_EXTENTS
Segment has too many extents - more than 90% of MAXEXTENTS used
BR0963I Check conditions for database operations:
Pos. Act. Lev. Condition Description
1 Y W ARCHIVE_TOO_OLD Last successful archive log backup older than 10 days (or has not been run)
2 Y W BACKUP_TOO_OLD Last successful complete database backup older than 10 days (or has not been run)
3 Y W LAST_ARCHIVE_FAILED Last archive log backup failed
4 Y W LAST_BACKUP_FAILED Last complete database backup failed
5 Y W LAST_OPERATION_FAILED Last 'chk' operation failed
6 N W LAST_OPERATION_FAILED Last DBA operation failed
7 Y W LAST_STATS_FAILED Last update optimizer statistics failed
8 Y W OPERATION_TOO_OLD Last successful 'chk' operation older than 10 days (or has not been run)
9 N W OPERATION_TOO_OLD Last successful DBA operation older than 10 days (or has not been run)
10 Y W STATS_TOO_OLD Last successful update optimizer statistics older than 10 days (or has not been run)
BR0964I Check conditions for database messages:
Pos. Act. Lev. Message Description
1 Y W ORA-00060 Deadlock while waiting for resource
2 Y E ORA-00272 Error writing archive log
3 Y E ORA-00376 Database file cannot be read
4 Y E ORA-00600 Oracle internal error
5 Y E ORA-01113 Data file needs media recovery
6 Y E ORA-01114 I/O error writing database file
7 Y E ORA-01115 I/O error reading database file
8 Y E ORA-01122 File verification check failed
9 Y E ORA-01135 Database file is offline
10 Y W ORA-01149 Cannot shutdown - data file in backup mode
11 Y W ORA-01555 Snapshot too old
12 Y W ORA-01562 Failed to extend rollback segment
13 Y E ORA-01578 Database block corrupted
14 Y E ORA-03113 End-of-file on communication channel
15 Y E ORA-07445 Exception encountered: core dump
16 Y W Checkpoint not complete
BR0965I Check conditions for database profile:
Pos. Act. Lev. Parameter Condition Value Unit
1 Y W CONTROL_FILE_RECORD_KEEP_TIME < 30
2 Y W CURSOR_SPACE_FOR_TIME <> FALSE
3 Y W DBWR_IO_SLAVES <> 0
4 Y W DB_BLOCK_BUFFERS <> 0
5 Y E DB_BLOCK_SIZE <> 8192
6 Y W DB_FILES < 254
7 Y W DB_FILE_MULTIBLOCK_READ_COUNT > 32
8 Y W DISK_ASYNCH_IO <> TRUE
9 Y W HASH_JOIN_ENABLED <> FALSE
10 Y E LOG_ARCHIVE_START <> TRUE
11 Y W LOG_BUFFER >< 2048,512 K
12 Y W LOG_CHECKPOINT_INTERVAL <> 0
13 Y W LOG_CHECKPOINT_TIMEOUT <> 0
14 Y W OPEN_CURSORS >< 2000,800
15 Y W OPTIMIZER_FEATURES_ENABLE <> 9.2.0
16 Y W OPTIMIZER_INDEX_COST_ADJ <> 10
17 Y W OPTIMIZER_MODE <> CHOOSE
18 Y W SHARED_POOL_SIZE < 50 M
19 Y E SORT_AREA_RETAINED_SIZE > 0
20 Y E SORT_AREA_SIZE >< 4,2 M
21 Y E TIMED_STATISTICS <> TRUE
22 Y E TRANSACTION_AUDITING <> FALSE
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.26
BR0807I Name of database instance: DEV
BR0808I BRCONNECT action ID: cdwnjhor
BR0809I BRCONNECT function ID: chk
BR0810I BRCONNECT function: check
BR0951I Number of active/inactive check conditions for database administration: 22/0
BR0952I Number of active/inactive check conditions for database operations: 8/2
BR0953I Number of active/inactive check conditions for database messages: 16/0
BR0954I Number of active/inactive check conditions for database profile: 22/0
BR0960I Last successful BRCONNECT check run: caaaaaaa.chk 0000-00-00 00.00.00
BR0126I Unattended mode active - no operator confirmation required
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.26
BR0969I Checking database administration...
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.26
BR0972I Checking database operations...
BR0973W Database operation alert - level: WARNING, operation: Archive log backup, condition: Operation too old or has not been run in clean-up period
BR0973W Database operation alert - level: WARNING, operation: Complete database backup, condition: Operation too old or has not been run in clean-up period
BR0973W Database operation alert - level: WARNING, operation: chk, condition: Operation too old or has not been run in clean-up period
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.27
BR0974I Checking database messages...
BR0976W Database message alert - level: ERROR, line: 468, time: 2030-11-04 10.13.17, message:
ORA-00600: internal error code, arguments: [4406], [0x6A366AA0], [0x0], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 472, time: 2030-11-04 10.13.17, message:
ORA-00600: internal error code, arguments: [kcbklbc_4], [], [], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 478, time: 2030-11-04 10.13.20, message:
ORA-00600: internal error code, arguments: [KSSRMP1], [], [], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 479, time: 2030-11-04 10.13.20, message:
ORA-00600: internal error code, arguments: [kcbklbc_4], [], [], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 483, time: 2030-11-04 10.13.22, message:
ORA-00600: internal error code, arguments: [KSSRMP1], [], [], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 484, time: 2030-11-04 10.13.22, message:
ORA-00600: internal error code, arguments: [KSSRMP1], [], [], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 485, time: 2030-11-04 10.13.22, message:
ORA-00600: internal error code, arguments: [kcbklbc_4], [], [], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 499, time: 2030-11-04 10.13.26, message:
ORA-00600: internal error code, arguments: [kcbgcur_9], [8388713], [29], [1610612736], [1610612738], [], [], []
BR0976W Database message alert - level: ERROR, line: 504, time: 2030-11-04 10.13.28, message:
ORA-00600: internal error code, arguments: [kcbgcur_9], [8388713], [29], [1610612736], [1610612738], [], [], []
BR0976W Database message alert - level: ERROR, line: 510, time: 2030-11-04 10.13.30, message:
ORA-00600: internal error code, arguments: [4406], [0x6A366AA0], [0x0], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 514, time: 2030-11-04 10.13.31, message:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], []
BR0976W Database message alert - level: ERROR, line: 521, time: 2030-11-04 10.13.31, message:
ORA-00600: internal error code, arguments: [kcbgcur_9], [8388713], [29], [1610612736], [1610612738], [], [], []
BR0280I BRCONNECT time stamp: 2007-11-05 11.23.27
BR0977I Checking database profile...
BR0979I Changes in database profile parameters:
Pos. Parameter name Old value
New value
1 O7_DICTIONARY_ACCESSIBILITY (new)
FALSE
2 AQ_TM_PROCESSES (new)
0
3 ARCHIVE_LAG_TARGET (new)
0
4 AUDIT_SYS_OPERATIONS (new)
FALSE
5 AUDIT_TRAIL (new)
NONE
6 BACKGROUND_CORE_DUMP (new)
partial
7 BACKGROUND_DUMP_DEST (new)
D:\oracle\DEV\saptrace\background
8 BACKUP_TAPE_IO_SLAVES (new)
FALSE
9 BITMAP_MERGE_AREA_SIZE (new)
1048576
10 BLANK_TRIMMING (new)
FALSE
11 CIRCUITS (new)
0
12 CLUSTER_DATABASE (new)
FALSE
13 CLUSTER_DATABASE_INSTANCES (new)
1
14 COMMIT_POINT_STRENGTH (new)
1
15 COMPATIBLE (new)
9.2.0
16 CONTROL_FILE_RECORD_KEEP_TIME (new)
30
17 CONTROL_FILES (new)
D:\oracle\DEV\origlogA\cntrl\cntrlDEV.dbf, D:\oracle\DEV\sapdata1\system_1\cntrl\cntrlDEV.dbf, D:\oracle\DEV\saparch\cntrl\cntrlDEV.dbf
18 CORE_DUMP_DEST (new)
D:\oracle\DEV\saptrace\background
19 CPU_COUNT (new)
1
20 CREATE_BITMAP_AREA_SIZE (new)
8388608
21 CURSOR_SHARING (new)
EXACT
22 CURSOR_SPACE_FOR_TIME (new)
FALSE
23 DB_16K_CACHE_SIZE (new)
0
24 DB_2K_CACHE_SIZE (new)
0
25 DB_32K_CACHE_SIZE (new)
0
26 DB_4K_CACHE_SIZE (new)
0
27 DB_8K_CACHE_SIZE (new)
0
28 DB_BLOCK_BUFFERS (new)
0
29 DB_BLOCK_CHECKING (new)
FALSE
30 DB_BLOCK_CHECKSUM (new)
TRUE
31 DB_BLOCK_SIZE (new)
8192
32 DB_CACHE_ADVICE (new)
ON
33 DB_CACHE_SIZE (new)
83886080
34 DB_FILE_MULTIBLOCK_READ_COUNT (new)
8
35 DB_FILES (new)
254
36 DB_KEEP_CACHE_SIZE (new)
0
37 DB_NAME (new)
DEV
38 DB_RECYCLE_CACHE_SIZE (new)
0
39 DB_WRITER_PROCESSES (new)
1
40 DBLINK_ENCRYPT_LOGIN (new)
FALSE
41 DBWR_IO_SLAVES (new)
0
42 DG_BROKER_CONFIG_FILE1 (new)
%ORACLE_HOME%\DATABASE\DR1%ORACLE_SID%.DAT
43 DG_BROKER_CONFIG_FILE2 (new)
%ORACLE_HOME%\DATABASE\DR2%ORACLE_SID%.DAT
44 DG_BROKER_START (new)
FALSE
45 DISK_ASYNCH_IO (new)
TRUE
46 DISTRIBUTED_LOCK_TIMEOUT (new)
60
47 DML_LOCKS (new)
4000
48 DRS_START (new)
FALSE
49 ENQUEUE_RESOURCES (new)
8000
50 FAST_START_IO_TARGET (new)
0
51 FAST_START_MTTR_TARGET (new)
900
52 FAST_START_PARALLEL_ROLLBACK (new)
LOW
53 FILE_MAPPING (new)
FALSE
54 GLOBAL_NAMES (new)
FALSE
55 HASH_AREA_SIZE (new)
4194304
56 HASH_JOIN_ENABLED (new)
FALSE
57 HI_SHARED_MEMORY_ADDRESS (new)
0
58 HS_AUTOREGISTER (new)
TRUE
59 INSTANCE_NAME (new)
dev
60 INSTANCE_NUMBER (new)
0
61 JAVA_MAX_SESSIONSPACE_SIZE (new)
0
62 JAVA_POOL_SIZE (new)
25165824
63 JAVA_SOFT_SESSIONSPACE_LIMIT (new)
0
64 JOB_QUEUE_PROCESSES (new)
0
65 LARGE_POOL_SIZE (new)
0
66 LICENSE_MAX_SESSIONS (new)
0
67 LICENSE_MAX_USERS (new)
0
68 LICENSE_SESSIONS_WARNING (new)
0
69 LOCK_SGA (new)
FALSE
70 LOG_ARCHIVE_DEST (new)
D:\oracle\DEV\oraarch\DEVarch
71 LOG_ARCHIVE_DEST_STATE_1 (new)
enable
72 LOG_ARCHIVE_DEST_STATE_10 (new)
enable
73 LOG_ARCHIVE_DEST_STATE_2 (new)
enable
74 LOG_ARCHIVE_DEST_STATE_3 (new)
enable
75 LOG_ARCHIVE_DEST_STATE_4 (new)
enable
76 LOG_ARCHIVE_DEST_STATE_5 (new)
enable
77 LOG_ARCHIVE_DEST_STATE_6 (new)
enable
78 LOG_ARCHIVE_DEST_STATE_7 (new)
enable
79 LOG_ARCHIVE_DEST_STATE_8 (new)
enable
80 LOG_ARCHIVE_DEST_STATE_9 (new)
enable
81 LOG_ARCHIVE_FORMAT (new)
ARC%S.%T
82 LOG_ARCHIVE_MAX_PROCESSES (new)
2
83 LOG_ARCHIVE_MIN_SUCCEED_DEST (new)
1
84 LOG_ARCHIVE_START (new)
TRUE
85 LOG_ARCHIVE_TRACE (new)
0
86 LOG_BUFFER (new)
1048576
87 LOG_CHECKPOINT_INTERVAL (new)
0
88 LOG_CHECKPOINT_TIMEOUT (new)
0
89 LOG_CHECKPOINTS_TO_ALERT (new)
TRUE
90 LOG_PARALLELISM (new)
1
91 LOGMNR_MAX_PERSISTENT_SESSIONS (new)
1
92 MAX_COMMIT_PROPAGATION_DELAY (new)
700
93 MAX_DISPATCHERS (new)
5
94 MAX_DUMP_FILE_SIZE (new)
UNLIMITED
95 MAX_ENABLED_ROLES (new)
30
96 MAX_ROLLBACK_SEGMENTS (new)
30
97 MAX_SHARED_SERVERS (new)
20
98 MTS_CIRCUITS (new)
0
99 MTS_MAX_DISPATCHERS (new)
5
100 MTS_MAX_SERVERS (new)
20
101 MTS_MULTIPLE_LISTENERS (new)
FALSE
102 MTS_SERVERS (new)
0
103 MTS_SERVICE (new)
DEV
104 MTS_SESSIONS (new)
0
105 NLS_LANGUAGE (new)
AMERICAN
106 NLS_LENGTH_SEMANTICS (new)
BYTE
107 NLS_NCHAR_CONV_EXCP (new)
FALSE
108 NLS_TERRITORY (new)
AMERICA
109 OBJECT_CACHE_MAX_SIZE_PERCENT (new)
10
110 OBJECT_CACHE_OPTIMAL_SIZE (new)
102400
111 OLAP_PAGE_POOL_SIZE (new)
33554432
112 OPEN_CURSORS (new)
800
113 OPEN_LINKS (new)
4
114 OPEN_LINKS_PER_INSTANCE (new)
4
115 OPTIMIZER_DYNAMIC_SAMPLING (new)
1
116 OPTIMIZER_FEATURES_ENABLE (new)
9.2.0
117 OPTIMIZER_INDEX_CACHING (new)
0
118 OPTIMIZER_INDEX_COST_ADJ (new)
10
119 OPTIMIZER_MAX_PERMUTATIONS (new)
2000
120 OPTIMIZER_MODE (new)
CHOOSE
121 ORACLE_TRACE_COLLECTION_PATH (new)
%ORACLE_HOME%\OTRACE\ADMIN\CDF\
122 ORACLE_TRACE_COLLECTION_SIZE (new)
5242880
123 ORACLE_TRACE_ENABLE (new)
FALSE
124 ORACLE_TRACE_FACILITY_NAME (new)
oracled
125 ORACLE_TRACE_FACILITY_PATH (new)
%ORACLE_HOME%\OTRACE\ADMIN\FDF\
126 OS_AUTHENT_PREFIX (new)
OPS$
127 OS_ROLES (new)
FALSE
128 PARALLEL_ADAPTIVE_MULTI_USER (new)
FALSE
129 PARALLEL_AUTOMATIC_TUNING (new)
FALSE
130 PARALLEL_EXECUTION_MESSAGE_SIZE (new)
2148
131 PARALLEL_MAX_SERVERS (new)
5
132 PARALLEL_MIN_PERCENT (new)
0
133 PARALLEL_MIN_SERVERS (new)
0
134 PARALLEL_SERVER (new)
FALSE
135 PARALLEL_SERVER_INSTANCES (new)
1
136 PARALLEL_THREADS_PER_CPU (new)
2
137 PARTITION_VIEW_ENABLED (new)
FALSE
138 PGA_AGGREGATE_TARGET (new)
85144371
139 PLSQL_COMPILER_FLAGS (new)
INTERPRETED
140 PLSQL_NATIVE_LIBRARY_SUBDIR_COUNT (new)
0
141 PLSQL_V2_COMPATIBILITY (new)
FALSE
142 PRE_PAGE_SGA (new)
FALSE
143 PROCESSES (new)
80
144 QUERY_REWRITE_ENABLED (new)
false
145 QUERY_REWRITE_INTEGRITY (new)
enforced
146 READ_ONLY_OPEN_DELAYED (new)
FALSE
147 RECOVERY_PARALLELISM (new)
0
148 REMOTE_ARCHIVE_ENABLE (new)
true
149 REMOTE_DEPENDENCIES_MODE (new)
TIMESTAMP
150 REMOTE_LOGIN_PASSWORDFILE (new)
NONE
151 REMOTE_OS_AUTHENT (new)
TRUE
152 REMOTE_OS_ROLES (new)
FALSE
153 REPLICATION_DEPENDENCY_TRACKING (new)
TRUE
154 RESOURCE_LIMIT (new)
FALSE
155 ROW_LOCKING (new)
always
156 SERIAL_REUSE (new)
DISABLE
157 SERIALIZABLE (new)
FALSE
158 SERVICE_NAMES (new)
DEV
159 SESSION_CACHED_CURSORS (new)
0
160 SESSION_MAX_OPEN_FILES (new)
10
161 SESSIONS (new)
96
162 SGA_MAX_SIZE (new)
219749116
163 SHADOW_CORE_DUMP (new)
partial
164 SHARED_MEMORY_ADDRESS (new)
0
165 SHARED_POOL_RESERVED_SIZE (new)
9011200
166 SHARED_POOL_SIZE -
Export with Table Splitting : ORA-01115: IO error reading block from file
Hello,
We are in perfroming the last dryrun of our CU&UC conversion.
The are now in the process of exporting the ECC6 system (Oracle 10.2.0.4.0, HPUX ia64) using sapinst features, "table splitting preparation"
When doing so, we are facing critical errors :
Creating file /export_uni/sapinst_splitting/ora_query3_tmp3_1.sql.
ERROR 2010-08-11 10:27:28.881
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-12801: error signaled in parallel query server P002
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
Additional information: 4
Additional information: 16640
Additional information: -1
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
ORA-06512: at "SAPR3.TABLE_SPLITTER", line 775
ORA-06512: at line 1
I have therefore perfmed a dbverify ; no corruption has been recorded.
When trying to perfrom the EXPORT, without table splitting ; it works fine ...but the processing time is extremely long, as you can imagine. Any help would be highly appreciated.Regards.
RaoulThank you Stefan,
Our HPUX Release seems to be indeed 11v3,
[root@:/root]# uname -a
HP-UX B.11.31 U ia64 2566039091 unlimited-user license
I'll check the installation of the patch and keep you informed
Thank you
Raoul
Edited by: Raoul Shiro on Aug 11, 2010 11:57 AM -
when we run sql update we get the error ORA-01115 : IO eror reading from file 348 and
ORA-01110 : data file 657 : /dev/vx/rdsk/racdg1/PSindex03 ORA-27072 : skgfdisp : I/O error SVR4 Error : 12 : not enough space.
the database is working perfectly.
the job runs perfectly when we re-run the job after several tries.
i have checked the oracle documentation on error and causes.they have not helped me yet.
please give your inputs.
oracle 9i with RAC
OS solaris1. Try to assess the cause and extent of the problem.
Examine the alert.log file for this instance. Scan the last few
days' entries for other occurrences of ORA-01115. If you find them,
A) Do they reference files in different disks?
If so, it is likely that there you have controller problems.
Move on to Scenario II.A below.
B) Do they reference different files in the same disk?
If so, it is likely that there are problems with that disk.
Move on to Scenario II.B below.
C) Do they always reference the same datafile?
If so, it is likely that the datafile contains bad blocks.
Move on to Scenario II.C below. If the file is bigger
than 2GB and you are running 7.1.4 or lower on a Solaris
platform, see Scenario II.D below.
D) If none of the above applies, move on to Step 2.
2. If the datafile is in the SYSTEM tablespace, or the database is in
NOARCHIVELOG mode, shut the database down. Move on to Step 4.
If shutdown immediate fails, do a shutdown abort.
3. If the database is in ARCHIVELOG mode, you should still shut the
database down. If the database cannot be shut down, offline the
datafile.
ALTER DATABASE DATAFILE '<full_path_file_name>' OFFLINE;
4. Try to copy the datafile to another disk (managed by a different
controller, if possible).
5. If the copy fails, even after you retry, the datafile must be considered
lost at this point. The next action depends on the tablespace to
which the lost file belongs. See the following Solution References to
PR entries, according to the different types of tablespaces,
for instructions on how to proceed.
IMPORTANT: While going through the references below, keep in mind that
if you restore the datafile from backup, you need to place it in another
disk, preferably under a different controller, and rename it inside Oracle
(see Note 115424.1 for details). If you recreate any tablespace, make
sure its datafiles are created in another disk, preferably under a
different controller.
Reference for Lost datafile scenarios : Note 198640.1
6. If the database is down, mount it.
7. Rename the datafile that you succeeded in copying inside Oracle.
ALTER DATABASE RENAME FILE '<old_full_path_file_name>'
TO '<new_full_path_file_name>';
8. If the database is mounted, open it. If you offlined the datafile,
perform media recovery on it, and then bring it online.
RECOVER DATAFILE '<full_path_file_name>';
ALTER DATABASE DATAFILE '<full_path_file_name>' ONLINE; -
One of my environment i am facing this error. Can any one explain what exactly this.
Can any one give the solution for this.
ORA-01115: IO error reading block from file 11 (block # 245504)
ORA-27072: File I/O errorRHK wrote:
One of my environment i am facing this error. Can any one explain what exactly this.
Can any one give the solution for this.
ORA-01115: IO error reading block from file 11 (block # 245504)
ORA-27072: File I/O error
[oracle@localhost dbs]$ oerr ora 27072
27072, 00000, "File I/O error"
// *Cause: read/write/readv/writev system call returned error, additional
// information indicates starting block number of I/O
// *Action: check errno
[oracle@localhost dbs]$ oerr ora 1115
01115, 00000, "IO error reading block from file %s (block # %s)"
// *Cause: Device on which the file resides is probably offline
// *Action: Restore access to the device
[oracle@localhost dbs]$ error is at OS level -
Some one have Media Block Recovery. My one datafile is corrupted showing block # ---- is in error. As I deploy the old Cold BACK and archeives , Problem comes again ?
Is there any problem with archives ?What is ORA-01115? (Nobody remembers all Oracle errors, ok I found it)
What's your OS and version?
What's your database version?
ORA-01115: IO error reading block from file string (block # string)
Cause: Device on which the file resides is probably offline
Action: Restore access to the device
The error message says the device is not accessible, this is not datafile corruption. It's not a case for restore/recovery, although that may come later, after the basic problem has been resolved.
Werner -
Dear All,
I created one table like
create table cls_lrn_tab_unique (F_no number unique UK_F_NO );
after performing some operations I want to delete the same.
At that time i got following error. Please help me and tell what is the reason for the error.
ORA-00604 error occured at recursive level1
ORA-20123 Insufficient privileges: you cannot drop table cls_lrn_tab_unique TABLE,
ORA-06512 at line no 2
Thanks and Regards
Prasad26bffcad-f9a2-4dcf-afa0-e1e33d0281bf wrote:
Dear All,
I created one table like
create table cls_lrn_tab_unique (F_no number unique UK_F_NO );
after performing some operations I want to delete the same.
At that time i got following error. Please help me and tell what is the reason for the error.
ORA-00604 error occured at recursive level1
ORA-20123 Insufficient privileges: you cannot drop table cls_lrn_tab_unique TABLE,
ORA-06512 at line no 2
Thanks and Regards
Prasad
ORA-20123 is a localized/customized error code & message; therefore any solution depends upon what is unique inside your DB now.
I suspect that some sort of TRIGGER exists, which throws posted error, but this is just idle speculation on my part.
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002 -
Error in mru internal routine: ORA-20001: no data found in tabular form
Hi All,
I am trying to do the Multi Row Update. Please go through the below process which i followes:
> I have a table B which is of child table of A, the columns belongs to table B are B_ID, B_Name, B_Description and A_ID.
> I have prepared a report with B_NAME, B_DESCRIPTION and B_ID and in this B_NAME is of LOV.
> Now I want to update the values through interface by clicking on SUBMIT [Apply Change] button.
> To do this I used the Process of "Multiple Rows Update" by choosing table B and a primary key value of table B which is B_ID.
While clicking on the SUBMIT [Apply Change] button I am getting this error:
Error in mru internal routine: ORA-20001: no data found in tabular formPlease tell me is i am following the correct process. If not please correct me.
Thanks in advance
VishwanathHi All,
I am trying to do the Multi Row Update. Please go through the below process which i followes:
> I have a table B which is of child table of A, the columns belongs to table B are B_ID, B_Name, B_Description and A_ID.
> I have prepared a report with B_NAME, B_DESCRIPTION and B_ID and in this B_NAME is of LOV.
> Now I want to update the values through interface by clicking on SUBMIT [Apply Change] button.
> To do this I used the Process of "Multiple Rows Update" by choosing table B and a primary key value of table B which is B_ID.
While clicking on the SUBMIT [Apply Change] button I am getting this error:
Error in mru internal routine: ORA-20001: no data found in tabular formPlease tell me is i am following the correct process. If not please correct me.
Thanks in advance
Vishwanath -
Error in Trigger ( PL/SQL: ORA-01744: inappropriate INTO)
Hi ,
I've written the trigger in the following format.. As the original trigger is around 700 lines, so just format is written here.. please co-operate..
CREATE OR REPLACE TRIGGER --
AFTER UPDATE OF COL1
ON TAB1
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
WHEN (NOT(OLD.COL1 IS NULL AND NEW.COL1=0))
DECLARE
rowToins PAK1.fdList;
i number;
BEGIN
IF :NEW.COL2='V' THEN
INSERT INTO DEST(
D_AT)
SELECT * FROM ( SELECT --
PAK2.FUN1('AD',TAB10.ID) AS D_AT
FROM ---
WHERE --- )
WHERE D_AT IS NOT NULL;
ELSEIF :NEW.COL2 ='H' THEN
SELECT * FROM ( SELECT --
PAK2.FUN1('AD',TAB9.ID) AS D_AT
BULK COLLECT INTO rowToins
FROM ---
WHERE --- )
WHERE D_AT IS NOT NULL;
i:=rowToins.FIRST;
WHILE i IS NOT NULL LOOP
--insert row 1
PAK1.fun2(rowToins(i).<col>,
i:=rowToins.NEXT(i);
END LOOP;
END IF;
END;
/The above code is giving the error..
PL/SQL: ORA-01744: inappropriate INTOSo how can i correct the code...
thanksThe line no..are
159/3 PL/SQL: SQL Statement ignored
213/16 PL/SQL: ORA-01744: inappropriate INTO
159 --> the first where condition in the example code
213 --> the select list column in the second if condition in example code
If i remove the
select * from (
PAK2.FUN1('AD',TAB9.ID) AS D_AT
WHERE D_AT IS NOT NULL;Then the trigger is created with no issues....
please let me know if i'm not clear
Edited by: josh1612 on Apr 27, 2009 3:42 AM -
Error(20,22): PL/SQL: ORA-00942: table or view does not exist
I am getting currently getting an error when I try and insert into a table from a different schema from my Stored Procedure:
Error(20,22): PL/SQL: ORA-00942: table or view does not exist
I am explicitly calling the table with the schema name infront i.e.
INSERT INTO SAPSR3.ZTREC_NAME_TYPE
MASTER_ID,
NAME_TYPE,
FAMILY_NAME,
FIRST_NAME,
MIDDLE_NAME,
TITLE
VALUES
In_MasterID,
In_NameType,
In_FamilyName,
In_FirstName,
In_MiddleName,
In_Title
I only get this error when I try and compile my stored procedure. If I try this insert not within a stored procedure (i.e. a blank script) it works perfectly.
Can anyone tell me what Im doing wrong?
Thanks.Hi,
It sounds like you (the procedure owner) have privileges on that table only through a role.
Roles don't count in stored procedures created with AUTHID OWNER (which is the default).
Either
(1) Have user SAPSR3 grant the necessary privileges directly to you (or to PUBLIC), or
(2) change the procedure so that it runs with the caller's privileges, by adding AUTHID CURRENT_USER after the argument list but before the keyword IS (os AS) like this:
CREATE OR REPLACE PROCEDURE foo
( x IN NUMBER
AUTHID CURRENT_USER
IS ... -
Error rendering element. Exception: ORA-00942: table or view does not exist
Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
RajuThis is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein -
My customer has an issue, and error message as below:
<PRE>Oracle error 1403: java.sql.SQLException: ORA-01403: no data found ORA-06512:
at line 1 has been detected in FND_SESSION_MANAGEMENT.CHECK_SESSION. Your
session is no longer valid.</PRE>
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
And customer’s statement is: Upgrade from EBS 11.5.10 to 12.1.3. Login the EBS, open any forms and put it in idle. Then refresh the form, error happens
Then, I checked ISP, and found two notes:
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid (Doc ID 1284094.1)
Note 1319380.1: Webadi Gl Journal Posting Errors After Atg R12.1.3 (Doc ID 1319380.1)
But these two notes are both WebADI.
Following is the data collection from customer:
1. Run UNIX command to check .class file version:
strings $JAVA_TOP/oracle/apps/bne/utilities/BneViewerUtils.class | grep Header--> S$Header: BneViewerUtils.java 120.33.12010000.17 2010/11/21 22:19:58 amgonzal s$
2. Run SQL to check you patch level:
SELECT * FROM fnd_product_installations WHERE patch_level LIKE '%BNE%';--> R12.BNE.B.3
3. Run SQL to check patch '9940148' applied or not:
SELECT * FROM ad_bugs ad WHERE ad.bug_number = '9940148';--> No Rows returned
4. Run SQL to check patch '9785477' applied or not:
SELECT * FROM ad_bugs WHERE bug_number in ('9785477');-->
BUG_ID APPLICATION_SHORT_NAME BUG_NUMBER CREATION_DATE ARU_RELEASE_NAME CREATED_BY LAST_UPDATE_DATE LAST_UPDATED_BY TRACKABLE_ENTITY_ABBR BASELINE_NAME GENERIC_PATCH LANGUAGE
576982 11839583 2011/8/7 上午 08:20:36 R12 5 2011/8/7 上午 08:20:36 5 pjt B n US
516492 9785477 2011/6/12 上午 11:42:45 R12 5 2011/6/12 上午 11:42:45 5 bne B n US
546109 9785477 2011/6/12 下午 01:17:41 R12 5 2011/6/12 下午 01:17:41 5 bne B n ZHT
5. Run SQL to check the status of object ‘FND_SESSION_MANAGEMENT’
SELECT * FROM dba_objects do WHERE do.object_name = 'FND_SESSION_MANAGEMENT';-->
OWNER OBJECT_NAME SUBOBJECT_NAME OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS TEMPORARY GENERATED SECONDARY NAMESPACE EDITION_NAME
APPS FND_SESSION_MANAGEMENT 219425 PACKAGE 2004/10/30 下午 01:52:35 2011/8/7 上午 08:18:39 2011-08-07:08:18:26 VALID N N N 1
APPS FND_SESSION_MANAGEMENT 226815 PACKAGE BODY 2004/10/31 上午 01:05:40 2011/8/7 上午 08:18:54 2011-08-07:08:18:27 VALID N N N 2
So, my question is: Customer’s BneViewerUtils.java version is already 120.33.12010000.17, which greater than 120.33.12010000.14. Is there any others solutions for this issue? Does customer still need to apply patch '9940148' based on action plan of
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid?
Customer's EBS version is 12.1.3; OS is HP-UX PA-RISC (64-bit); DB is 11.2.0.2.
Thanks,
JackieAnd customer’s statement is: Upgrade from EBS 11.5.10 to 12.1.3. Login the EBS, open any forms and put it in idle. Then refresh the form, error happens
Idle for how long? Is the issue with all sessions?
Please see these docs/links
User Sessions Get Timed Out Before Idle Time Parameter Values Are Reached [ID 1306678.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Timeout+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Then, I checked ISP, and found two notes:
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid (Doc ID 1284094.1)
Note 1319380.1: Webadi Gl Journal Posting Errors After Atg R12.1.3 (Doc ID 1319380.1)
But these two notes are both WebADI.Can you find any details about the error in Apache log files and in the application.log file?
Any errors in the database log file?
So, my question is: Customer’s BneViewerUtils.java version is already 120.33.12010000.17, which greater than 120.33.12010000.14. Is there any others solutions for this issue? No.
Does customer still need to apply patch '9940148' based on action plan ofIf the issue not with Web ADI, then ignore this patch. However, if you use Web ADI you could query AD_BUGS table and verify if you have the patch applied.
Note 1284094.1: Web ADI Journal Upload Errors With ORA-01403 No Data Found ORA-06512 At Line Has Been Detected In FND_SESSION_MANAGEMENT.CHECK_SESSION.Your Session Is No Longer Valid?
Customer's EBS version is 12.1.3; OS is HP-UX PA-RISC (64-bit); DB is 11.2.0.2.If you could not find any details in the logs, please enable debug as per (R12, 12.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN [ID 422419.1]).
Thanks,
Hussein -
Error in mru internal routine: ORA-20001
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "8845492C13CD535CF052A3C2441A41F3", item checksum = "9B2D18BBC17D51CBC5EEAC115693C8BB"., update "CPS"."TS_AX_TIME_STUDY" set "DRIVER_ID" = :b1, "ROUTE_TYPE" = :b2, "ROUTE_SUB_TYPE" = :b3, "ROUTE_NUMBER" = :b4, "ROUTE_NUMBER_MIDDAY" = :b5
Exported application from apex.oracle.com. Imported to local apex deployment, local is running Application Express 3.0.1.00.07.
This error occurs on only one page, and only on the local deployment.
Any ideas?
-chrisFound the source of the problem. I had hidden the "Row Selector" on the master-detail report (for my purposes it was unneccessary), when re-introduced all was well again.
thanks for looking
-chris -
Master detail form Error in mru internal routine: ORA-20001
Hi,
i created a master-detail form with apex standrad wizard.
Master e datail are on the same page.
All works fine.
My detail form contain some fields of my detail table.
Now i added a link on detail form for call a form with all fields of my detail table.
The link work fine.
When i try to add row or update my detail form i receive the error
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "D472A2BF636CA11122F196B8A32B3DC8", item checksum
Any help?
Thanks in advance
LukxLukx,
I've just reproduced your what I believe you wanted and didn't receive any errors. Here are the steps I took.
1) Used the wizards to create a Master Detail form (with Detail edit on the same page as the master and only showing 2 of the detail columns)
2) Used the wizard to create a FORM ON A TABLE for my detail table allowing the user to edit all detail columns
3) Created a "column link" column on the detail form of the Master Detail form which links to the FORM ON A TABLE, passing across the ID of the detail record.
When I do this, everything seems to work perfectly as expected.
Is there something I'm missing in the steps you performed to create your scenario?
Thanks
Doug
http://www.sumneva.com -
Error in giving variable in ora:readFile() Xpath function
Hi,
I have a requirement like i need to give a variable name in ora:readFile() Xpath function. Below is the method in which i am trying. but i am getting error
ora:readFile('file:////home/casdevro/tbm/archive/bpws:getVariableData('inputFile')')
Error iam getting while compiling is:
Error(80):
[Error ORABPEL-10039]: invalid xpath expression
[Description]: in line 80 of "C:\Softwares\JDev10.1.3.4\jdevstudio10134\jdev\mywork\Test\bpel\Test.bpel", xpath expression "ora:readFile('file:////home/casdevro/tbm/archive/bpws:getVariableData('inputFile')')" specified in <from> is not valid, because XPath query syntax error.
Syntax error while parsing xpath expression "ora:readFile('file:////home/casdevro/tbm/archive/bpws:getVariableData('inputFile')')", at position "71" the exception is Expected: ).
Please verify the xpath query "ora:readFile('file:////home/casdevro/tbm/archive/bpws:getVariableData('inputFile')')" which is defined in BPEL process.
[Potential fix]: Please make sure the expression is valid.
Am i missing anything. Please guide me
Thanks in advance.Try this. And I guess one forward slash after "file:" suffices.
ora:readFile(concat('file:/home/casdevro/tbm/archive/', bpws:getVariableData('inputFile')'))
Maybe you are looking for
-
10.7.2 corrupts encrypted external drives
One of the more useful new features of OS X 10.7 was the ability to encrypt a complete drive. Using Disk Utility, and choosing "MacOS Extended (Journaled, Encrypted)" to format the drive, you can set up a drive so that it can only be mounted by enter
-
Hello. I am using a ZTE 3G modem. Whenever I connect to internet, Sometimes during browsing or downloading it disconnects with the error message, "You were disconnected by the PPP server. Try reconnecting." There is no problem with the modem. Last fe
-
Acrobat Pro 9 will not accept serial number
When I install Acrobat Pro 9 on Windows 7 x64 I recieved the error message invalid serial number. I have called and verified that the number is valid. This serial number is part of the CS 5 Design suite. The application will install in the trail
-
Indesign spot colour gradient??
Hi everyone, I have setup a document with a spot gold 872c and would like to use this as a gradient from solid 872 to a tint of 872 back to a solid 872. How is this done? I have greated the spots and included them on a grad but cant change the centre
-
i cant authorize my pc on windows 7 it tells me that my account is temporary unavalible and to deautorize all the computers i have to wait untill may 2012 i cant wait that much longer everybody knows a solution?