Eth0: unknown interface: No such device

Hi all
I know that this problem was being solved here, but I am still stuck.
During boot process I receive the message:
eth0: unknown interface: No such device
I have already configured /etc/rc.conf and module for Realtek Ethernet si also loaded.. I can see it in lsmod, so it's ok.
Configuration:
HP Compaq nc6120, 2.6.13-ARCH (default distriobution kernel)
Thanks a lot for help.

Hi
When I write lsmode I can see there module for ethernet realtek...something like eth1234 (i don't know name of module exactly because I am out of my linux box).So I think that there is no error.
I am still stuck with this problem ...:|

Similar Messages

[SOLVED] wlan0: unknown interface: No such device

Got this error today while trying to sudo ifconfig wlan0 up
It's probably because of some package update... reinstalling didn't work, and it's not a hardware problem (it works with a livecd). Someone managed to fix this problem with rfkill, but it didn't do anything when I tried...
Any ideas?
Last edited by Tiigon (2011-08-04 17:00:56)

Tiigon wrote:
karol wrote:Here's the relevant bug report https://bugs.archlinux.org/task/25308
Are you using archboot or linux 3.0?
Archboot... kernel version is 2.6.39, testing isn't enabled
Thank you for your cooperation. Have a nice day :-)

Siocsifaddr no such device

So I just installed Arch, just the core and nothing else.
Not sure what to say, I'm using an Asus M2V motherboard which has the Attansic L1 ehternet drivers.
ifconfig -a produces everything seemingly fine, I've edited no files might I add. (except for making Tony the hostname in rc).
When i try to restart the network (apart from the fact that it never actually starts in the first place) it just says
*siocsifaddr no such device
etch0 - unknown interface
siocsifNETMASK no such device
siocsifBRDADDR no such device
etho interface no such device
This is the rc.con networking section.
lo" 127.0.0.1"
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.158.0.255"
INTERFACEs=("dhcp")
I edited the interfaces part, I have a few times.. nothing works.
and the gateway is just
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
I have to hand it to myself though, this is the first time a distro has not picked up the internet in many years, and I can't seem to fix it.
Any help much appreceated.
Last edited by Blindraven (2008-01-07 05:35:02)

Well, that's completely wrong.
Remove the lo= line, that's getting handled in /etc/rc.sysinit already, so no need for it in rc.conf.
eth0="dhcp"
INTERFACES=(eth0)

Wlan0 No such device + Wicd problem

hi all
my archlinux works fine but up to yesterday... after full system update, and after restart, i get some realy frustrating problem. currently wi-fi interface "wlan0" dosent exist anymore... when i try typing
iwconfig wlan0
i get respond ....wlan0 No such device...
linuxe detect my card, but i dont know how i can force that card to working, i try reconfigure netwirk follow by Wiki but nothing happened, so now i dont have more ide fo resolve this problem
other problem is Wicd, when i try click on icon in taskbar that icon just gone, when i try start again Wicd, i so jumping icon but that's it, nothing more. Everything happened after yesterday full system update.
thanks for any help

yes, sorry...
Card: Atheros AR5007EG
pacman.log - http://wklej.to/Tmjml
Apr 24 00:14:21 localhost Apr 24 00:14:21 localhost Apr 24 00:24:46 localhost Apr 24 00:24:46 localhost Apr 24 00:30:09 localhost Apr 24 00:31:01 localhost Apr 24 00:31:39 localhost Apr 24 00:33:16 localhost Apr 24 00:33:17 localhost Apr 24 00:33:17 localhost Apr 24 00:33:19 localhost Apr 24 00:33:19 localhost Apr 24 00:33:19 localhost Apr 24 00:33:19 localhost Apr 24 00:33:19 localhost Apr 24 00:33:19 localhost Apr 24 00:33:19 localhost Apr 24 00:33:19 localhost Apr 23 23:33:20 localhost Apr 23 23:33:20 localhost Apr 23 23:33:20 localhost Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:11 localhost kernel: [ Apr 24 00:34:14 localhost kernel: [ Apr 24 00:34:19 localhost kernel: [ Apr 24 00:34:22 localhost Apr 24 00:34:22 localhost Apr 24 00:34:22 localhost kernel: [ Apr 24 00:34:22 localhost Apr 24 00:34:22 localhost Apr 24 00:34:22 localhost kernel: [ Apr 24 00:34:22 localhost kernel: [ Apr 24 00:34:22 localhost kernel: [ Apr 24 00:34:23 localhost Apr 24 00:34:23 localhost kernel: [ Apr 24 00:34:23 localhost kernel: [ Apr 24 00:34:24 localhost kernel: [ Apr 24 00:34:24 localhost kernel: [ Apr 24 00:34:27 localhost kernel: [ Apr 24 00:34:28 localhost kernel: [ Apr 24 00:34:28 localhost Apr 24 00:34:29 localhost Apr 24 00:34:29 localhost Apr 24 00:34:29 localhost Apr 24 00:34:29 localhost Apr 24 00:34:33 localhost Apr 24 00:34:35 localhost Apr 24 00:34:35 localhost Apr 24 00:34:36 localhost Apr 24 00:34:37 localhost Apr 24 00:34:37 localhost Apr 24 00:34:37 localhost Apr 24 00:34:37 localhost Apr 24 00:34:37 localhost Apr 24 00:34:41 localhost Apr 24 00:34:41 localhost Apr 24 00:34:50 localhost Apr 24 00:34:50 localhost Apr 24 00:34:51 localhost Apr 24 00:34:51 localhost Apr 24 00:34:52 localhost kernel: [ Apr 24 00:34:56 localhost Apr 24 00:34:56 localhost Apr 24 00:34:56 localhost Apr 24 00:34:56 localhost kernel: [ Apr 24 00:35:03 localhost Apr 24 00:35:03 localhost Apr 24 00:35:13 localhost Apr 24 00:35:13 localhost Apr 24 00:35:13 localhost Apr 24 00:35:28 localhost Apr 24 00:35:29 localhost Apr 23 23:35:29 localhost Apr 24 00:35:36 localhost Apr 24 00:35:36 localhost Apr 24 00:35:36 localhost Apr 24 00:35:36 localhost Apr 24 00:35:36 localhost Apr 24 00:35:36 localhost kernel: [ Apr 24 00:35:43 localhost Apr 24 00:35:43 localhost Apr 24 00:35:54 localhost Apr 24 00:35:54 localhost Apr 24 00:35:54 localhost Apr 24 00:35:54 localhost Apr 24 00:35:59 localhost Apr 24 00:35:59 localhost Apr 23 23:36:17 localhost Apr 23 23:36:17 localhost Apr 24 00:36:25 localhost Apr 24 00:36:25 localhost Apr 24 00:36:31 localhost Apr 24 00:36:31 localhost Apr 24 00:37:01 localhost kernel: [ Apr 24 00:37:24 localhost kernel: [ Apr 24 00:40:30 localhost Apr 24 00:40:31 localhost Apr 24 00:40:31 localhost Apr 24 00:40:31 localhost Apr 24 00:40:37 localhost kernel: [ Apr 24 00:41:24 localhost kernel: [ Apr 24 00:41:46 localhost kernel: [ Apr 24 00:43:42 localhost Apr 24 00:43:42 localhost Apr 24 00:43:42 localhost Apr 24 00:44:06 localhost Apr 24 00:44:06 localhost Apr 24 00:44:11 localhost Apr 24 00:44:11 localhost Apr 24 00:44:11 localhost kernel: [ Apr 24 00:45:04 localhost kernel: [ Apr 24 00:45:33 localhost kernel: [ /> dbus[669]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[669]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
dbus[669]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[669]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
kernel: [ 4954.606977] wicd-client[1853]: segfault at a379000 ip b7043966 sp bf828b60 error 4 in libglib-2.0.so.0.3000.2[b6ffb000+f6000]
kernel: [ 5007.444013] wicd-client[18730]: segfault at 8d24000 ip b705d966 sp bfc1ac30 error 4 in libglib-2.0.so.0.3000.2[b7015000+f6000]
kernel: [ 5044.879566] wicd-client[19679]: segfault at 8b4b000 ip b6fee966 sp bfdcda40 error 4 in libglib-2.0.so.0.3000.2[b6fa6000+f6000]
shutdown[22093]: shutting down for system reboot
kernel: [ 5142.634562] chromium[14702]: segfault at 0 ip b35a3774 sp bfd6a850 error 4 in chromium[b3190000+4667000]
init: Switching to runlevel: 6
kernel: [ 5144.744429] Bluetooth: RFCOMM TTY layer initialized
kernel: [ 5144.744434] Bluetooth: RFCOMM socket layer initialized
kernel: [ 5144.744436] Bluetooth: RFCOMM ver 1.11
bluetoothd[1267]: Terminating
bluetoothd[1267]: Stopping SDP server
bluetoothd[1267]: Exit
ntfs-3g[362]: Unmounting /dev/sda5 (Dodatkowy)
ntfs-3g[360]: Unmounting /dev/sda2 (System)
rtkit-daemon[1758]: Demoting known real-time threads.
rtkit-daemon[1758]: Successfully demoted thread 1756 of process 1756 (/usr/bin/pulseaudio).
rtkit-daemon[1758]: Demoted 1 threads.
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000bfcfd000 (usable)
0.000000] BIOS-e820: 00000000bfcfd000 - 00000000bfd08000 (reserved)
0.000000] BIOS-e820: 00000000bfd08000 - 00000000bfd52000 (usable)
0.000000] BIOS-e820: 00000000bfd52000 - 00000000bfd55000 (reserved)
0.000000] BIOS-e820: 00000000bfd55000 - 00000000bfdbb000 (usable)
0.000000] BIOS-e820: 00000000bfdbb000 - 00000000bfdbf000 (reserved)
0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfe70000 (usable)
0.000000] BIOS-e820: 00000000bfe70000 - 00000000bfebf000 (ACPI NVS)
0.000000] BIOS-e820: 00000000bfebf000 - 00000000bff00000 (ACPI data)
0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
0.000000] DMI 2.4 present.
0.000000] last_pfn = 0xbfe70 max_arch_pfn = 0x100000
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] found SMP MP-table at [c00fe1b0] fe1b0
0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
0.000000] RAMDISK: 7fdd1000 - 7fff0000
0.000000] Allocated new RAMDISK: 375df000 - 377fde55
0.000000] Move RAMDISK from 000000007fdd1000 - 000000007ffefe54 to 375df000 - 377fde54
0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
0.000000] ACPI: XSDT bfefe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
0.000000] ACPI: FACP bfefd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
0.000000] ACPI: DSDT bfef4000 08968 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
0.000000] ACPI: FACS bfe75000 00040
0.000000] ACPI: APIC bfef3000 00068 (v02 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
0.000000] ACPI: MCFG bfef2000 0003C (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
0.000000] ACPI: SLIC bfef1000 00176 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
0.000000] ACPI: HPET bfef0000 00038 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
0.000000] ACPI: SSDT bfeef000 004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
0.000000] ACPI: SSDT bfeee000 00232 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
0.000000] ACPI: SSDT bfeed000 000A0 (v01 PmRef Cpu1Tst 00003000 INTL 20051117)
0.000000] 2182MB HIGHMEM available.
0.000000] 887MB LOWMEM available.
0.000000] mapped low ram: 0 - 377fe000
0.000000] low ram: 0 - 377fe000
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000010 -> 0x00001000
0.000000] Normal 0x00001000 -> 0x000377fe
0.000000] HighMem 0x000377fe -> 0x000bfe70
0.000000] Movable zone start PFN for each node
0.000000] Early memory PFN ranges
0.000000] 0: 0x00000010 -> 0x0000009f
0.000000] 0: 0x00000100 -> 0x000bfcfd
0.000000] 0: 0x000bfd08 -> 0x000bfd52
0.000000] 0: 0x000bfd55 -> 0x000bfdbb
0.000000] 0: 0x000bfdbf -> 0x000bfe70
0.000000] Using APIC driver default
0.000000] ACPI: PM-Timer IO Port: 0x408
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s30848 r0 d22400 u2097152
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779760
0.000000] Kernel command line: acpi_backlight=vendor root=/dev/disk/by-uuid/69fbfc98-9ed3-4d5c-afcf-8d5842fdda76 ro quiet vga=791 splash
0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
0.000000] Initializing CPU#0
0.000000] allocated 6288128 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] Initializing HighMem for node 0 (000377fe:000bfe70)
0.000000] Memory: 3103056k/3144128k available (3773k kernel code, 40548k reserved, 1435k data, 520k init, 2234752k highmem)
0.000000] virtual kernel memory layout:
0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
0.000000] .data : 0xc04af7a9 - 0xc0616400 (1435 kB)
0.000000] .text : 0xc0100000 - 0xc04af7a9 (3773 kB)
0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
0.000000] Verbose stalled-CPUs detection is disabled.
0.000000] NR_IRQS:2304 nr_irqs:512 16
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] Fast TSC calibration using PIT
0.000000] Detected 1995.066 MHz processor.
0.003334] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.38 BogoMIPS (lpj=6650220)
0.003339] pid_max: default: 32768 minimum: 301
0.003364] Security Framework initialized
0.003368] AppArmor: AppArmor disabled by boot time parameter
0.003384] Mount-cache hash table entries: 512
0.003522] Initializing cgroup subsys cpuacct
0.003525] Initializing cgroup subsys memory
0.003534] Initializing cgroup subsys devices
0.003536] Initializing cgroup subsys freezer
0.003538] Initializing cgroup subsys net_cls
0.003541] Initializing cgroup subsys blkio
0.003570] CPU: Physical Processor ID: 0
0.003572] CPU: Processor Core ID: 0
0.003574] mce: CPU supports 6 MCE banks
0.003582] CPU0: Thermal monitoring enabled (TM1)
0.003585] using mwait in idle threads.
0.004442] ACPI: Core revision 20120111
0.013343] ftrace: allocating 16621 entries in 33 pages
0.023390] Enabling APIC mode: Flat. Using 1 I/O APICs
0.023843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.057402] CPU0: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz stepping 0d
0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
0.059996] PEBS disabled due to CPU errata.
0.059996] ... version: 2
0.059996] ... bit width: 40
0.059996] ... generic registers: 2
0.059996] ... value mask: 000000ffffffffff
0.059996] ... max period: 000000007fffffff
0.059996] ... fixed-purpose events: 3
0.059996] ... event mask: 0000000700000003
0.076781] NMI watchdog enabled, takes one hw-pmu counter.
0.103346] Booting Node 0, Processors #1 Ok.
0.006666] Initializing CPU#1
0.116696] NMI watchdog enabled, takes one hw-pmu counter.
0.123330] Brought up 2 CPUs
0.123333] Total of 2 processors activated (7983.77 BogoMIPS).
0.124595] devtmpfs: initialized
0.124595] PM: Registering ACPI NVS region at bfe70000 (323584 bytes)
0.124595] NET: Registered protocol family 16
0.124608] ACPI: bus type pci registered
0.124692] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.124696] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
0.124698] PCI: Using MMCONFIG for extended config space
0.124700] PCI: Using configuration type 1 for base access
0.126695] bio: create slab <bio-0> at 0
0.126708] ACPI: Added _OSI(Module Device)
0.126708] ACPI: Added _OSI(Processor Device)
0.126708] ACPI: Added _OSI(3.0 _SCP Extensions)
0.126708] ACPI: Added _OSI(Processor Aggregator Device)
0.132350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
0.133660] ACPI: SSDT bfe74c90 0022C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
0.134081] ACPI: Dynamic OEM Table Load:
0.134085] ACPI: SSDT (null) 0022C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
0.134239] ACPI: SSDT bfe73610 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
0.134641] ACPI: Dynamic OEM Table Load:
0.134644] ACPI: SSDT (null) 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
0.134662] ACPI: SSDT bfe74f10 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
0.134662] ACPI: Dynamic OEM Table Load:
0.134662] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
0.134662] ACPI: SSDT bfe76d10 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
0.136866] ACPI: Dynamic OEM Table Load:
0.136870] ACPI: SSDT (null) 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
0.143334] ACPI: EC: GPE storm detected, transactions will use polling mode
0.143404] ACPI: Interpreter enabled
0.143414] ACPI: (supports S0 S3 S4 S5)
0.143438] ACPI: Using IOAPIC for interrupt routing
0.377459] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
0.377459] ACPI: No dock devices found.
0.377459] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.377459] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359)
0.377459] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.377899] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
0.377902] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
0.377905] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
0.377910] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
0.377957] PCI host bridge to bus 0000:00
0.377960] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
0.377962] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
0.377965] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
0.377967] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
0.380997] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
0.381002] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
0.381761] pci 0000:00:01.0: PCI bridge to [bus 01-01]
0.381840] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
0.381927] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
0.389997] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
0.390481] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
0.390497] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
0.391286] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
0.391929] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359)
0.391943] pci0000:00: Requesting ACPI _OSC control (0x1d)
0.392004] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120111/nspredef-359)
0.392017] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
0.392019] ACPI _OSC control for PCIe not granted, disabling ASPM
0.398940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
0.399009] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
0.399076] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
0.399142] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
0.399208] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
0.399275] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
0.399341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
0.399407] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
0.400007] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
0.400013] vgaarb: loaded
0.400015] vgaarb: bridge control possible 0000:01:00.0
0.400068] PCI: Using ACPI for IRQ routing
0.411601] NetLabel: Initializing
0.411604] NetLabel: domain hash size = 128
0.411605] NetLabel: protocols = UNLABELED CIPSOv4
0.411619] NetLabel: unlabeled traffic allowed by default
0.411626] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
0.411634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
0.411639] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
0.423327] Switching to clocksource hpet
0.430835] pnp: PnP ACPI init
0.430859] ACPI: bus type pnp registered
0.431630] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
0.431714] system 00:01: [io 0x0600-0x060f] has been reserved
0.431718] system 00:01: [io 0x0610] has been reserved
0.431721] system 00:01: [io 0x0800-0x080f] has been reserved
0.431724] system 00:01: [io 0x0810-0x0817] has been reserved
0.431727] system 00:01: [io 0x0400-0x047f] has been reserved
0.431729] system 00:01: [io 0x0500-0x053f] has been reserved
0.431733] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
0.431736] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
0.431739] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
0.431742] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
0.431745] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
0.431749] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
0.431752] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
0.431755] system 00:01: [mem 0x32000000-0x320000ff] could not be reserved
0.546987] pnp: PnP ACPI: found 10 devices
0.546988] ACPI: ACPI bus type pnp unregistered
0.584492] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
0.584564] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
0.584568] pci 0000:00:01.0: PCI bridge to [bus 01-01]
0.584571] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
0.584575] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
0.584580] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
0.584585] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
0.584589] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
0.584596] pci 0000:00:1c.0: bridge window [mem 0xda300000-0xdb2fffff]
0.584602] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
0.584610] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
0.584614] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
0.584621] pci 0000:00:1c.1: bridge window [mem 0xd9300000-0xda2fffff]
0.584627] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
0.584636] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
0.584640] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
0.584647] pci 0000:00:1c.2: bridge window [mem 0xd8200000-0xd92fffff]
0.584653] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
0.584661] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
0.584665] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
0.584672] pci 0000:00:1c.3: bridge window [mem 0xd7100000-0xd81fffff]
0.584678] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref]
0.584687] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
0.584694] pci 0000:00:1e.0: bridge window [mem 0xd7000000-0xd70fffff]
0.584867] NET: Registered protocol family 2
0.584940] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
0.585196] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
0.585692] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
0.585905] TCP: Hash tables configured (established 131072 bind 65536)
0.585908] TCP reno registered
0.585911] UDP hash table entries: 512 (order: 2, 16384 bytes)
0.585920] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
0.585985] NET: Registered protocol family 1
0.586537] Unpacking initramfs...
0.640183] Freeing initrd memory: 2172k freed
0.641574] apm: BIOS not found.
0.641853] audit: initializing netlink socket (disabled)
0.641870] type=2000 audit(1335227628.639:1): initialized
0.642322] highmem bounce pool size: 64 pages
0.642327] HugeTLB registered 4 MB page size, pre-allocated 0 pages
0.644772] VFS: Disk quotas dquot_6.5.2
0.644839] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
0.644953] msgmni has been set to 1700
0.645165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
0.645201] io scheduler noop registered
0.645203] io scheduler deadline registered
0.645210] io scheduler cfq registered (default)
0.646108] vesafb: mode is 1024x768x16, linelength=2048, pages=1
0.646110] vesafb: protected mode interface info at c000:b900
0.646113] vesafb: pmi: set display start = c00cb963, set palette = c00cb9be
0.646115] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
0.646127] vesafb: scrolling: redraw
0.646130] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
0.646741] vesafb: framebuffer at 0xd1000000, mapped to 0xf8080000, using 3072k, total 14336k
0.675524] Console: switching to colour frame buffer device 128x48
0.704189] fb0: VESA VGA frame buffer device
0.704246] GHES: HEST is not enabled!
0.704265] isapnp: Scanning for PnP cards...
1.017410] isapnp: No Plug & Play device found
1.017475] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1.018223] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
1.054544] serio: i8042 KBD port at 0x60,0x64 irq 1
1.054581] serio: i8042 AUX port at 0x60,0x64 irq 12
1.054707] mousedev: PS/2 mouse device common for all mice
1.056794] rtc_cmos 00:03: RTC can wake from S4
1.056937] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
1.056971] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
1.056995] cpuidle: using governor ladder
1.056997] cpuidle: using governor menu
1.057241] TCP cubic registered
1.057383] NET: Registered protocol family 10
1.057919] NET: Registered protocol family 17
1.057927] Registering the dns_resolver key type
1.057944] Using IPI No-Shortcut mode
1.058083] registered taskstats version 1
1.058748] rtc_cmos 00:03: setting system clock to 2012-04-24 00:33:49 UTC (1335227629)
1.058826] Initializing network drop monitor service
1.058905] Freeing unused kernel memory: 520k freed
1.059203] Write protecting the kernel text: 3776k
1.059230] Write protecting the kernel read-only data: 1108k
1.067199] udevd[37]: starting version 182
1.070319] SCSI subsystem initialized
1.074777] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
1.074781] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
1.080025] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
1.088413] scsi0 : ahci
1.088930] scsi1 : ahci
1.089070] scsi2 : ahci
1.089266] ata1: SATA max UDMA/133 abar m2048@0xdb304000 port 0xdb304100 irq 45
1.089270] ata2: SATA max UDMA/133 abar m2048@0xdb304000 port 0xdb304180 irq 45
1.089274] ata3: SATA max UDMA/133 abar m2048@0xdb304000 port 0xdb304200 irq 45
1.410040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
1.410072] ata3: SATA link down (SStatus 0 SControl 300)
1.410106] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
1.410960] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
1.411178] ata2.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40J, max UDMA/100
1.411181] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
1.411308] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
1.411312] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
1.412365] ata2.00: configured for UDMA/100
1.412522] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
1.412871] ata1.00: configured for UDMA/133
1.413016] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
1.413275] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
1.413324] sd 0:0:0:0: [sda] Write Protect is off
1.413348] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
1.413360] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1.413548] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
1.413593] sd 1:0:0:0: [sdb] Write Protect is off
1.413616] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1.499218] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
1.499872] sd 0:0:0:0: [sda] Attached SCSI disk
1.643354] Refined TSC clocksource calibration: 1994.999 MHz.
1.643360] Switching to clocksource tsc
1.772943] sdb: sdb1
1.773206] sd 1:0:0:0: [sdb] Attached SCSI disk
1.836500] scsi3 : ata_piix
1.837336] scsi4 : ata_piix
1.838307] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60e0 irq 14
1.838311] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60e8 irq 15
2.007042] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.B4, max UDMA/33
2.020253] ata4.00: configured for UDMA/33
2.021487] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.B4 PQ: 0 ANSI: 5
2.022927] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
2.022930] cdrom: Uniform CD-ROM driver Revision: 3.20
3.970538] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem
4.000569] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
6.422864] udevd[167]: starting version 182
6.969985] fuse init (API version 7.18)
7.175465] Linux media interface: v0.10
7.208820] Linux video capture interface: v2.00
7.301563] usbcore: registered new interface driver usbfs
7.301591] usbcore: registered new interface driver hub
7.301649] usbcore: registered new device driver usb
7.396791] usbcore: registered new interface driver uvcvideo
7.396793] USB Video Class driver (1.1.1)
7.478745] sd 0:0:0:0: Attached scsi generic sg0 type 0
7.478796] sd 1:0:0:0: Attached scsi generic sg1 type 0
7.478841] sr 3:0:0:0: Attached scsi generic sg2 type 5
7.704161] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0C:00/input/input1
7.704169] ACPI: Power Button [PWRB]
7.704238] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0D:00/input/input2
7.704281] ACPI: Lid Switch [LID0]
7.704347] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0E:00/input/input3
7.704351] ACPI: Sleep Button [SLPB]
7.704428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
7.704432] ACPI: Power Button [PWRF]
7.757040] wmi: Mapper loaded
7.764340] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:34/LNXVIDEO:00/input/input5
7.764349] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
7.783603] Marking TSC unstable due to TSC halts in idle
7.783978] Switching to clocksource hpet
7.806735] thermal LNXTHERM:00: registered as thermal_zone0
7.806738] ACPI: Thermal Zone [TZ01] (63 C)
8.085198] IR NEC protocol handler initialized
8.263816] iTCO_vendor_support: vendor-support=0
8.338774] input: PC Speaker as /devices/platform/pcspkr/input/input6
8.428261] Linux agpgart interface v0.103
8.530372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
8.530446] ehci_hcd 0000:00:1a.7: EHCI Host Controller
8.530479] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
8.530511] ehci_hcd 0000:00:1a.7: debug port 1
8.534436] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdb304c00
8.543367] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
8.543569] hub 1-0:1.0: USB hub found
8.543575] hub 1-0:1.0: 4 ports detected
8.543738] ehci_hcd 0000:00:1d.7: EHCI Host Controller
8.543751] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
8.543785] ehci_hcd 0000:00:1d.7: debug port 1
8.547664] uhci_hcd: USB Universal Host Controller Interface driver
8.548334] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdb304800
8.556719] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
8.557004] hub 2-0:1.0: USB hub found
8.557010] hub 2-0:1.0: 6 ports detected
8.557152] uhci_hcd 0000:00:1a.0: UHCI Host Controller
8.557191] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
8.557238] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
8.557465] hub 3-0:1.0: USB hub found
8.557470] hub 3-0:1.0: 2 ports detected
8.557617] uhci_hcd 0000:00:1a.1: UHCI Host Controller
8.557626] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
8.557667] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060a0
8.558927] hub 4-0:1.0: USB hub found
8.558932] hub 4-0:1.0: 2 ports detected
8.559045] uhci_hcd 0000:00:1d.0: UHCI Host Controller
8.559056] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
8.559087] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
8.560433] hub 5-0:1.0: USB hub found
8.560439] hub 5-0:1.0: 2 ports detected
8.560549] uhci_hcd 0000:00:1d.1: UHCI Host Controller
8.560559] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
8.560601] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060
8.560871] hub 6-0:1.0: USB hub found
8.560876] hub 6-0:1.0: 2 ports detected
8.560989] uhci_hcd 0000:00:1d.2: UHCI Host Controller
8.560998] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
8.561028] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
8.561927] hub 7-0:1.0: USB hub found
8.561932] hub 7-0:1.0: 2 ports detected
8.863902] usb 2-4: new high-speed USB device number 2 using ehci_hcd
9.332966] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
9.343597] ACPI: Battery Slot [BAT0] (battery present)
9.370197] ACPI: AC Adapter [AC] (on-line)
9.402840] acer_wmi: Acer Laptop ACPI-WMI Extras
9.418212] sdhci: Secure Digital Host Controller Interface driver
9.418215] sdhci: Copyright(c) Pierre Ossman
9.453477] acer_wmi: Function bitmap for Communication Device: 0x11
9.495148] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
9.518007] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
9.518110] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
9.518202] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
9.528291] ene_ir: chip is 0x3909 - kbver = 0x24, rev = 0xc0
9.528294] ene_ir: PLL freq = 1406
9.528295] ene_ir: KB3926B detected
9.530494] IR RC5(x) protocol handler initialized
9.676786] firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
9.693704] sdhci-pci 0000:07:00.1: SDHCI controller found [1180:0822] (rev 22)
9.694758] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
9.695791] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
9.696672] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
9.697929] mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA
9.736965] tg3.c:v3.122 (December 7, 2011)
9.755783] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
9.758116] r852: driver loaded successfully
9.781066] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1b:38:dd:85:dd
9.781071] tg3 0000:05:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
9.781075] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
9.781078] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
9.814504] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
9.866470] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04713/0x204000/0x0
9.871540] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
9.879913] r592: driver successfully loaded
9.898559] cfg80211: Calling CRDA to update world regulatory domain
9.928086] sdhci-pci 0000:07:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
9.953749] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
10.173390] usb 7-1: new full-speed USB device number 2 using uhci_hcd
10.176818] firewire_core: created device fw0: GUID c74095a100023f83, S400
10.340056] ath5k 0000:06:00.0: registered as 'phy0'
10.529614] IR RC6 protocol handler initialized
10.583365] usb 7-2: new full-speed USB device number 3 using uhci_hcd
10.606907] IR JVC protocol handler initialized
10.620943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
10.623377] Registered IR keymap rc-rc6-mce
10.623510] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
10.623642] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
10.626789] ene_ir: driver has been successfully loaded
10.631524] IR Sony protocol handler initialized
10.634142] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
10.634386] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
10.635543] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
10.785853] IR SANYO protocol handler initialized
10.890590] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
11.043088] nvidia: module license 'NVIDIA' taints kernel.
11.043093] Disabling lock debugging due to kernel taint
11.051282] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input14
11.051452] IR MCE Keyboard/mouse protocol handler initialized
11.071340] nvidia 0000:01:00.0: power state changed by ACPI to D0
11.071347] nvidia 0000:01:00.0: power state changed by ACPI to D0
11.071365] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
11.071624] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
11.130085] lirc_dev: IR Remote Control driver registered, major 250
11.130707] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
11.130710] IR LIRC bridge handler initialized
13.005645] Bluetooth: Core ver 2.16
13.005673] NET: Registered protocol family 31
13.005676] Bluetooth: HCI device and connection manager initialized
13.005679] Bluetooth: HCI socket layer initialized
13.005682] Bluetooth: L2CAP socket layer initialized
13.005687] Bluetooth: SCO socket layer initialized
13.076520] cfg80211: World regulatory domain updated:
13.076524] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
13.076528] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
13.076531] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
13.076534] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
13.076537] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
13.076539] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
13.110705] usbcore: registered new interface driver btusb
13.815752] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input15
13.815917] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
13.821299] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/input/input16
13.821484] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
13.821505] usbcore: registered new interface driver usbhid
13.821507] usbhid: USB HID core driver
14.425795] EXT4-fs (sda6): re-mounted. Opts: (null)
15.149749] Adding 1494008k swap on /dev/sda8. Priority:-1 extents:1 across:1494008k
25.822705] ADDRCONF(NETDEV_UP): wlan0: link is not ready
31.424652] ADDRCONF(NETDEV_UP): eth0: link is not ready
bluetoothd[1274]: Bluetooth daemon 4.99
bluetoothd[1274]: Starting SDP server
34.359472] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
bluetoothd[1274]: Listening for HCI events on hci0
bluetoothd[1274]: HCI dev 0 up
34.492247] Bluetooth: RFCOMM TTY layer initialized
34.492253] Bluetooth: RFCOMM socket layer initialized
34.492255] Bluetooth: RFCOMM ver 1.11
bluetoothd[1274]: Adapter /org/bluez/1274/hci0 has been enabled
35.019073] ADDRCONF(NETDEV_UP): wlan0: link is not ready
35.387146] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
35.585419] ADDRCONF(NETDEV_UP): eth0: link is not ready
35.905322] ADDRCONF(NETDEV_UP): wlan0: link is not ready
39.341184] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
39.739072] Intel AES-NI instructions are not detected.
dhcpcd[1363]: version 5.5.6 starting
dhcpcd[1363]: wlan0: sending IPv6 Router Solicitation
dhcpcd[1363]: wlan0: rebinding lease of 192.168.1.66
dhcpcd[1363]: wlan0: acknowledged 192.168.1.66 from 192.168.1.254
dhcpcd[1363]: wlan0: checking for 192.168.1.66
dhcpcd[1363]: wlan0: sending IPv6 Router Solicitation
dhcpcd[1363]: wlan0: leased 192.168.1.66 for 86400 seconds
dhcpcd[1363]: forked to background, child pid 1401
dbus[685]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
dhcpcd[1401]: wlan0: sending IPv6 Router Solicitation
dbus[685]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
polkitd[1476]: started daemon version 0.104 using authority implementation `local' version `0.104'
dbus[685]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
dbus[685]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
dhcpcd[1401]: wlan0: sending IPv6 Router Solicitation
dhcpcd[1401]: wlan0: no IPv6 Routers available
dbus[685]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
dbus[685]: [system] Successfully activated service 'org.freedesktop.UPower'
dbus[685]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
dbus[685]: [system] Successfully activated service 'org.freedesktop.UDisks'
64.334062] EXT4-fs (sda6): re-mounted. Opts: commit=0
dbus[685]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[685]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
68.405909] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
dbus[685]: [system] Activating service name='org.kde.powerdevil.backlighthelper' (using servicehelper)
org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[685]: [system] Successfully activated service 'org.kde.powerdevil.backlighthelper'
dbus[685]: [system] Activating service name='org.freedesktop.RealtimeKit1' (using servicehelper)
dbus[685]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
rtkit-daemon[1751]: Successfully made thread 1749 of process 1749 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
bluetoothd[1274]: HCI dev 0 down
bluetoothd[1274]: Adapter /org/bluez/1274/hci0 has been disabled
bluetoothd[1274]: HCI dev 0 unregistered
bluetoothd[1274]: Stopping hci0 event socket
bluetoothd[1274]: Unregister path: /org/bluez/1274/hci0
107.596755] usb 7-2: USB disconnect, device number 3
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
rtkit-daemon[1751]: Successfully made thread 2050 of process 2050 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
rtkit-daemon[1751]: Successfully made thread 2053 of process 2053 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
193.048355] wicd-client[1878]: segfault at 9d41000 ip b7045966 sp bfe0f450 error 4 in libglib-2.0.so.0.3000.2[b6ffd000+f6000]
215.924465] wicd-client[3672]: segfault at 9249000 ip b703b966 sp bf84d370 error 4 in libglib-2.0.so.0.3000.2[b6ff3000+f6000]
dbus[685]: [system] Reloaded configuration
dbus[685]: [system] Reloaded configuration
dbus[685]: [system] Reloaded configuration
dbus[685]: [system] Reloaded configuration
409.414850] wicd-client[8791]: segfault at a4b8000 ip b7056966 sp bfed1840 error 4 in libglib-2.0.so.0.3000.2[b700e000+f6000]
455.626203] wicd-client[10007]: segfault at 9f2f000 ip b70cc966 sp bfe9c100 error 4 in libglib-2.0.so.0.3000.2[b7084000+f6000]
478.212287] wicd-client[10567]: segfault at a58d000 ip b7061966 sp bf9a6960 error 4 in libglib-2.0.so.0.3000.2[b7019000+f6000]
dbus[685]: [system] Activating service name='org.kde.ksysguard.processlisthelper' (using servicehelper)
org.kde.ksysguard.processlisthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
dbus[685]: [system] Successfully activated service 'org.kde.ksysguard.processlisthelper'
dbus[685]: [system] Activating service name='org.wicd.daemon' (using servicehelper)
dbus[685]: [system] Activated service 'org.wicd.daemon' failed: Launch helper exited with unknown return code 1
dbus[685]: [system] Activating service name='org.freedesktop.NetworkManager' (using servicehelper)
dbus[685]: [system] Activated service 'org.freedesktop.NetworkManager' failed: Launch helper exited with unknown return code 1
623.489051] wicd-client[14072]: segfault at 91f3000 ip b7000966 sp bf8dff40 error 4 in libglib-2.0.so.0.3000.2[b6fb8000+f6000]
675.561949] wicd-client[15565]: segfault at a393000 ip b70b8966 sp bff30110 error 4 in libglib-2.0.so.0.3000.2[b7070000+f6000]
704.622762] wicd-client[16320]: segfault at 4d0 ip b63d7dd4 sp bffee720 error 4 in l

Athereos wifi gives strange "no such device" errors

I've installed madwifi and udev loads the module (ath_pci) automatically on start... But the Network script complains the ath0 doesn't exist when I boot up:
Error for wireless request "Set ESSID" (8B1A) :
Set failed on device ath0 ; no such device.
Error, ath0: ioctl SIOCGIFHWADDR: No such device
Likewise, ifconfig doesn't show ath0 and iwconfig shows no wireless extensions. But I've got the right stuff in rc.conf:
lo="lo 127.0.0.1"
eth0="dhcp"
ath0="dhcp"
INTERFACES=(lo eth0 ath0)
and in /etc/conf.d/wireless:
wlan_ath0="ath0 essid MyEssid"
WLAN_INTERFACES=(ath0)
Also, I don't know if this is part of the problem but lspci tells me this about my wifi:
03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)
What gives? Is there a known software bug? Is this unsupported hardware, contrary to what I've read about this laptop?
(Hmm, I haven't tried loading it without the country code. I'll see if that works... No, still doesn't work. Bugger.)
Last edited by Gullible Jones (2007-06-03 21:56:08)

Fivre: try blacklisting the pcspkr module in rc.conf.
Re ndiswrapper: worked out better than I expected... Installed fine, module was able to load, etc. However, wlan0 still doesn't exist. dmesg gives me:
ndiswrapper (ntoskernel_exit:2650): object dbec3de0 type 2 was not freed, freeing it now
ndiswrapper version 1.43 loaded (smp=yes)
ndiswrapper: driver net5211 (,04/05/2007,5.3.0.35) loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ndiswrapper (ZwClose:2194): closing handle 0xdeab25e8 not implemented
PCI: Setting latency timer of device 0000:03:00.0 to 64
ndiswrapper (NdisWriteErrorLogEntry:199): log: C0001389, count: 4, return_address: e051d054
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xde70b8cc
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0x28
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xe03a5000
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xe03a5000
ndiswrapper (miniport_init:271): couldn't initialize device: C000009A
ndiswrapper (pnp_start_device:425): Windows driver couldn't initialize the device (C0000001)
unregister_netdevice: device eth%d/de70b000 never was registered
BUG: at net/core/dev.c:3259 unregister_netdevice()
[<c02bfdcf>] unregister_netdev+0xf/0x20
[<e04cd9bb>] wrap_ndis_remove_device+0x3b/0x200 [ndiswrapper]
[<e04ce39d>] NdisDispatchPnp+0x12d/0xdb0 [ndiswrapper]
[<c011f7d1>] __activate_task+0x21/0x40
[<c0170bbd>] cache_alloc_refill+0x16d/0x510
[<c011f569>] __wake_up_common+0x39/0x60
[<c011fba8>] __wake_up+0x38/0x50
[<e04c7842>] IoAllocateIrp+0x62/0xa0 [ndiswrapper]
[<e04c83e5>] IoBuildAsynchronousFsdRequest+0x35/0x170 [ndiswrapper]
[<e04c7b95>] IofCallDriver+0x55/0xc0 [ndiswrapper]
[<e04ca10b>] IoSendIrpTopDev+0xbb/0x120 [ndiswrapper]
[<e04ca1e3>] pnp_remove_device+0x73/0x1d0 [ndiswrapper]
[<e04ca6b4>] wrap_pnp_start_device+0x1f4/0x290 [ndiswrapper]
[<e04ca795>] wrap_pnp_start_pci_device+0x45/0x50 [ndiswrapper]
[<c01b568f>] sysfs_make_dirent+0x2f/0x50
[<c01b665e>] sysfs_create_link+0x6e/0x160
[<c0235398>] pci_match_device+0xa8/0xc0
[<c0235426>] pci_device_probe+0x56/0x80
[<c028c206>] really_probe+0x66/0x180
[<c028c369>] driver_probe_device+0x49/0xc0
[<c033f49d>] klist_next+0x5d/0xa0
[<c028c510>] __driver_attach+0x80/0x90
[<c028b6ea>] bus_for_each_dev+0x3a/0x60
[<c028c096>] driver_attach+0x16/0x20
[<c028c490>] __driver_attach+0x0/0x90
[<c028ba4b>] bus_add_driver+0x7b/0x1a0
[<c0235604>] __pci_register_driver+0x84/0xd0
[<e04bcbf7>] loader_init+0x107/0x230 [ndiswrapper]
[<e04caaef>] wrap_procfs_init+0x3f/0xb0 [ndiswrapper]
[<e014d0b5>] wrapper_init+0xb5/0xc2 [ndiswrapper]
[<c0148d5d>] sys_init_module+0x15d/0x1970
[<c0104232>] sysenter_past_esp+0x5f/0x85
=======================
ndiswrapper (miniport_halt:335): device de70b500 is not initialized - not halting
ndiswrapper: device eth%d removed
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ndiswrapper: probe of 0000:03:00.0 failed with error -22
usbcore: registered new interface driver ndiswrapper
Time to file a bug on the ndiswrapper website?
(ndiswrapper -l says it's there though:
net5211 : driver installed
device (168C:001C) present
WTF?)
Last edited by Gullible Jones (2007-06-06 03:41:01)

Network Trouble - eth0 not interface for sis900 controller

I'm not sure how to even state this problem, but I have gone through the guides a couple of times to try and find what I missed or some more enlightening information. Currently, I get nothing if I ping google, or anything else for that matter.
Here's what I have,
useful stuff from my rc.conf file:
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(sis900 !snd_pcsp !pcspkr)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="archPC"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)
and from /etc/hosts:
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost archPC
# End of file
and the log from $ lspci -v
Log of lspci -v
Fri Nov 5 21:57:05 2010
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller
Flags: bus master, medium devsel, latency 32
Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: ddd00000-dfefffff
Prefetchable memory behind bridge: cd900000-ddbfffff
Kernel modules: shpchp
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
Flags: bus master, medium devsel, latency 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Flags: medium devsel
I/O ports at 0c00 [size=32]
Kernel modules: i2c-sis96x
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Flags: bus master, medium devsel, latency 128
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at ff00 [size=16]
Kernel driver in use: pata_sis
Kernel modules: pata_sis, sis5513
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
Subsystem: Device a007:1019
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at dc00 [size=256]
I/O ports at d800 [size=128]
Capabilities: [48] Power Management version 2
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dfffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller
Flags: bus master, medium devsel, latency 64, IRQ 12
Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 2.0 Controller
Flags: bus master, medium devsel, latency 64, IRQ 12
Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapter onboard [Asus P4SC-EA]
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at d400 [size=256]
Memory at dfffb000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Kernel driver in use: sis900
Kernel modules: sis900
00:08.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
Subsystem: Creative Labs SB0410 SBLive! 24-bit
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d000 [size=32]
Capabilities: [dc] Power Management version 2
Kernel driver in use: CA0106
Kernel modules: snd-ca0106
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3) (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Memory at ddb80000 (32-bit, prefetchable) [size=512K]
Expansion ROM at dfee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
Kernel modules: nvidiafb, rivafb
Fri Nov 5 21:57:05 2010
and the log from $ dmesg |grep sis900
Log of dmesg
Fri Nov 5 21:58:40 2010
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 base 0E0000000 mask FFC000000 write-combining
7 base 0E0000000 mask FFC000000 write-combining
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fff0000 (usable)
modified: 000000007fff0000 - 000000007fff8000 (ACPI data)
modified: 000000007fff8000 - 0000000080000000 (ACPI NVS)
modified: 00000000ffee0000 - 00000000fff0ffff (reserved)
modified: 00000000fffc0000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 7fe52000 - 7ffdf955
Allocated new RAMDISK: 00100000 - 0028d955
Move RAMDISK from 000000007fe52000 - 000000007ffdf954 to 00100000 - 0028d954
ACPI: RSDP 000fa300 00014 (v00 AMI )
ACPI: RSDT 7fff0000 00028 (v01 AMIINT SiS645XX 00000010 MSFT 0100000B)
ACPI: FACP 7fff0030 00081 (v02 AMIINT SiS645XX 00000011 MSFT 0100000B)
ACPI: DSDT 7fff00c0 03355 (v01 SiS 645 00001000 MSFT 0100000D)
ACPI: FACS 7fff8000 00040
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00016000 - 0001cf00
(10 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0001551000 - 00015570e4] BRK ==> [0001551000 - 00015570e4]
#5 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#6 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#7 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#8 [0000100000 - 000028d955] NEW RAMDISK ==> [0000100000 - 000028d955]
#9 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fff0
On node 0 totalpages: 524159
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294626 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7fee0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34776 r0 d22568 u4194304
pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
Kernel command line: root=/dev/disk/by-uuid/36f862e5-d2b3-4d28-939e-59d1184cb887 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 10485120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0007fff0)
Memory: 2061016k/2097088k available (2895k kernel code, 34608k reserved, 1208k data, 408k init, 1187784k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2655.871 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5313.06 BogoMIPS (lpj=8852903)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20091214
ACPI: setting ELCR to 0200 (from 1820)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (5313.06 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff]
pci 0000:00:02.0: Enabling SiS 96x SMBus
pci 0000:00:02.1: reg 20: [io 0x0c00-0x0c1f]
pci 0000:00:02.5: reg 20: [io 0xff00-0xff0f]
pci 0000:00:02.7: reg 10: [io 0xdc00-0xdcff]
pci 0000:00:02.7: reg 14: [io 0xd800-0xd87f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10: [mem 0xdfffc000-0xdfffcfff]
pci 0000:00:03.1: reg 10: [mem 0xdfffd000-0xdfffdfff]
pci 0000:00:03.2: reg 10: [mem 0xdfffe000-0xdfffefff]
pci 0000:00:03.3: reg 10: [mem 0xdffff000-0xdfffffff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:04.0: reg 14: [mem 0xdfffb000-0xdfffbfff]
pci 0000:00:04.0: reg 30: [mem 0xdffc0000-0xdffdffff pref]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:08.0: reg 10: [io 0xd000-0xd01f]
pci 0000:00:08.0: supports D1 D2
pci 0000:01:00.0: reg 10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:00.0: reg 18: [mem 0xddb80000-0xddbfffff pref]
pci 0000:01:00.0: reg 30: [mem 0xdfee0000-0xdfefffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0: bridge window [mem 0xddd00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xcd900000-0xddbfffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 *12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xddd00000-0xdfefffff]
pci 0000:00:01.0: bridge window [mem 0xcd900000-0xddbfffff pref]
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xddd00000-0xdfefffff]
pci_bus 0000:01: resource 2 [mem 0xcd900000-0xddbfffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1590k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1289006002.179:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1710
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a post-1991 82077
libata version 3.00 loaded.
pata_sis 0000:00:02.5: version 0.5.2
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ata1.00: ATA-5: WDC WD400BB-00CAA1, 17.07W17, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA
ata1.01: ATA-5: MAXTOR 6L060J3, A93.0500, max UDMA/133
ata1.01: 117266688 sectors, multi 16: LBA
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.01: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-00CA 17.0 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA MAXTOR 6L060J3 A93. PQ: 0 ANSI: 5
ata2.00: ATAPI: SONY DVD RW DRU-530A, 1.0d, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-530A 1.0d PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:1:0: [sdb] 117266688 512-byte logical blocks: (60.0 GB/55.9 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 < sdb5 >
sd 0:0:1:0: [sdb] Attached SCSI disk
REISERFS (device sda2): found reiserfs format "3.6" with standard journal
REISERFS (device sda2): using ordered data mode
REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda2): checking transaction log (sda2)
REISERFS (device sda2): Using r5 hash to sort names
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
udev: starting version 151
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
sis900 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:0a:e6:1f:fd:1e
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
lp: driver loaded but no devices found
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ppdev: user-space parallel port driver
agpgart-sis 0000:00:00.0: SiS chipset [1039/0646]
agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 12 (level, low) -> IRQ 12
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 12, io mem 0xdffff000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 11, io mem 0xdfffc000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 11, io mem 0xdfffd000
IT8705 SuperIO detected.
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 12
ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 12 (level, low) -> IRQ 12
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 12, io mem 0xdfffe000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
lp0: using parport0 (interrupt-driven).
gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 579kHz
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
intel8x0_measure_ac97_clock: measured 50956 usecs (2451 samples)
intel8x0: clocking to 48000
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
CA0106 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
snd-ca0106: Model 1006 Rev 00000000 Serial 10061102
REISERFS (device sdb5): found reiserfs format "3.6" with standard journal
REISERFS (device sdb5): using ordered data mode
REISERFS (device sdb5): journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sdb5): checking transaction log (sdb5)
REISERFS (device sdb5): Using r5 hash to sort names
REISERFS (device sda3): found reiserfs format "3.6" with standard journal
REISERFS (device sda3): using ordered data mode
REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda3): checking transaction log (sda3)
REISERFS (device sda3): Using r5 hash to sort names
Adding 2538260k swap on /dev/sda4. Priority:-1 extents:1 across:2538260k
eth0: Media Link Off
usb 1-3: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 2:0:0:0: Direct-Access PNY USB 2.0 FD 8.02 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdc] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 45 00 00 08
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI removable disk
Fri Nov 5 21:58:40 2010
and, finally, from $ ifconfig -a
Log of ifconfig -a
Fri Nov 5 21:59:41 2010
eth0 Link encap:Ethernet HWaddr 00:0A:E6:1F:FD:1E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0xd400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Fri Nov 5 21:59:41 2010

I'm sorry, I don't understand the issue.
from syslog: eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:0a:e6:1f:fd:1e
from ifconfig: eth0 Link encap:Ethernet HWaddr 00:0A:E6:1F:FD:1E
The mac addresses all match eth0 is the sis 9000. And, lspci tells us the sis900 kernel module is loaded
Is the issue that you don't have an IP address? We can fix that (I think )

[Solved] mythtv-setup DVB (could not get card info/No such device)

Update: Solution in post #4.
I'm building a new Arch server which will replace my existing mythtv backend using a HP microserver. Other than my old machine not being updated in some time, the only difference is new box is 64bit. I have 2x Sony PlayTV USB DVB's and have left one plugged into each system.
[root@oldserver ~]# uname -a
Linux oldserver 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 13:04:04 UTC 2012 i686 GNU/Linux
[root@microserver ~]# uname -a
Linux microserver 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 09:15:13 CET 2013 x86_64 GNU/Linux
While trying to add my tuners to the new box from mythtv-setup I get the following error in the log and "could not get card info" on the screen in setup:
2013-02-13 20:27:47.629155 I Current MythTV Schema Version (DBSchemaVer): 1307
2013-02-13 20:28:18.498767 E FE_GET_INFO ioctl failed (/dev/dvb/adapter0/frontend0)
eno: No such device (19)
2013-02-13 20:28:18.537457 E FE_GET_INFO ioctl failed (/dev/dvb/adapter0/frontend0)
eno: No such device (19)
To me this is either permissions of the device, which match on both systems (except for the + on the oldserver which I think is ACL but output of getfacl are identical?)
[root@microserver ~]# ls -ld /dev/dvb/adapter*{,/*}
drwxr-xr-x 2 root root 120 Feb 13 17:22 /dev/dvb/adapter0
crw-rw---- 1 root video 212, 4 Feb 13 17:22 /dev/dvb/adapter0/demux0
crw-rw---- 1 root video 212, 5 Feb 13 17:22 /dev/dvb/adapter0/dvr0
crw-rw---- 1 root video 212, 3 Feb 13 17:22 /dev/dvb/adapter0/frontend0
crw-rw---- 1 root video 212, 7 Feb 13 17:22 /dev/dvb/adapter0/net0
drwxr-xr-x 2 root root 120 Feb 13 17:22 /dev/dvb/adapter1
crw-rw---- 1 root video 212, 68 Feb 13 17:22 /dev/dvb/adapter1/demux0
crw-rw---- 1 root video 212, 69 Feb 13 17:22 /dev/dvb/adapter1/dvr0
crw-rw---- 1 root video 212, 67 Feb 13 17:22 /dev/dvb/adapter1/frontend0
crw-rw---- 1 root video 212, 71 Feb 13 17:22 /dev/dvb/adapter1/net0
[root@oldserver ~]# ls -ld /dev/dvb/adapter*{,/*}
drwxr-xr-x 2 root root 120 Jan 7 21:48 /dev/dvb/adapter0
crw-rw----+ 1 root video 212, 4 Jan 7 21:48 /dev/dvb/adapter0/demux0
crw-rw----+ 1 root video 212, 5 Jan 7 21:48 /dev/dvb/adapter0/dvr0
crw-rw----+ 1 root video 212, 3 Jan 7 21:48 /dev/dvb/adapter0/frontend0
crw-rw----+ 1 root video 212, 7 Jan 7 21:48 /dev/dvb/adapter0/net0
drwxr-xr-x 2 root root 120 Jan 7 21:48 /dev/dvb/adapter1
crw-rw----+ 1 root video 212, 68 Jan 7 21:48 /dev/dvb/adapter1/demux0
crw-rw----+ 1 root video 212, 69 Jan 7 21:48 /dev/dvb/adapter1/dvr0
crw-rw----+ 1 root video 212, 67 Jan 7 21:48 /dev/dvb/adapter1/frontend0
crw-rw----+ 1 root video 212, 71 Jan 7 21:48 /dev/dvb/adapter1/net0
The users have correct group status, even tried as root.
[root@oldserver ~]# id media
uid=1001(media) gid=100(users) groups=100(users),91(video),998(mythtv)
[root@microserver ~]# id media
uid=1000(media) gid=100(users) groups=100(users),10(wheel),91(video),92(audio),93(optical),999(mythtv)
[root@oldserver ~]# id mythtv
uid=998(mythtv) gid=998(mythtv) groups=998(mythtv),91(video),92(audio),93(optical)
[root@microserver ~]# id mythtv
uid=999(mythtv) gid=999(mythtv) groups=999(mythtv),10(wheel),91(video),92(audio),93(optical),100(users)
or missing firmware which is identical bar obviously 64bit libs
[root@microserver ~]# ls -l /usr/lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /usr/lib64/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /usr/lib/firmware/dvb-usb-dib0700-1.20.fw
[root@oldserver ~]# ls -l /usr/lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Jun 15 2012 /usr/lib/firmware/dvb-usb-dib0700-1.20.fw
[root@microserver ~]# ls -l /lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /lib64/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Oct 31 07:36 /lib/firmware/dvb-usb-dib0700-1.20.fw
[root@oldserver ~]# ls -l /lib*/firmware/dvb-usb-dib0700-1.20.fw
-rw-r--r-- 1 root root 33768 Jun 15 2012 /lib/firmware/dvb-usb-dib0700-1.20.fw
And the device is found, with not issues scanning channels using linuxtv-dvb-apps.....
[root@microserver ~]# dmesg | grep dvb
[ 11.892891] dvb-usb: found a 'Sony PlayTV' in cold state, will try to load a firmware
[ 12.044667] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 12.754034] dvb-usb: found a 'Sony PlayTV' in warm state.
[ 12.754171] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.214473] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.666764] dvb-usb: schedule remote query interval to 50 msecs.
[ 13.666779] dvb-usb: Sony PlayTV successfully initialized and connected.
[ 13.667106] usbcore: registered new interface driver dvb_usb_dib0700
[root@microserver ~]# scan /usr/share/dvb/dvb-t/au-Melbourne
scanning /usr/share/dvb/dvb-t/au-Melbourne
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 226500000 1 3 9 3 1 1 0
initial transponder 177500000 1 3 9 3 1 1 0
initial transponder 191625000 1 3 9 3 1 1 0
initial transponder 219500000 1 3 9 3 1 1 0
initial transponder 536625000 1 2 9 3 1 2 0
>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0230: pmt_pid 0x0102 ABC -- ABC News 24 (running)
[shrink output]
Network Name 'ABC Melbourne'
[shrink output]
dumping lists (29 services)
[shrink output]
Done.
Hopefully someone wiser than I can spot the problem here and I can get this build finished
Edit: I should add that I did a trial install of Ubuntu 12.04, upto date as of few days ago and it worked perfectly though I didn't note down what kernel version (was 64bit). Nothing has changed hardware wise.
Last edited by dave00 (2013-02-23 22:57:54)

fphillips wrote:
Try femon -H -a0 while trying to add card in mythtv-setup. Explanation here: http://code.mythtv.org/trac/ticket/10830#comment:7
It seems to affect dvb usb devices. I didn't see any evidence of this patch http://patchwork.linuxtv.org/patch/13563/ in current kernels, but it may have been rewritten. I haven't had to change my card setup and don't have usb tuners, so I haven't hit this problem.
Edit: Found it, ha, just went out yesterday, will be in 3.9: (search for Juergen) http://patchwork.linuxtv.org/patch/16925/
That worked great.
I did stumble upon the femon thing at some point but I didn't see any explanation for it and all my googling for femon resulted in a plugin for VDR which totally had me stumped. After your post a tried a slightly different google string and found it was in the linuxtv-dvb-apps package. In hindsight a "pacman -Qo femon" would have given me the answer...
Thanks for your efforts fphillips.

Getting Error Message - mount.ocfs2: No such device while mounting

I am trying to mount an ocfs2 file system. The file system seems to have been created fine but I get an error message when I try to mount it. Here's what I get :
[root@mdcpsdb1 init.d]# ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Active
[root@mdcpsdb1 init.d]# fsck.ocfs2 /dev/sdc1
Checking OCFS2 filesystem in /dev/sdc1:
label: oracle_hr
uuid: f6 23 5e 3b ad bb 49 87 81 a3 cb f0 b7 2a d0 ad
number of blocks: 24416784
bytes per block: 4096
number of clusters: 6104196
bytes per cluster: 16384
max slots: 4
/dev/sdc1 is clean. It will be checked after 20 additional mounts.
[root@mdcpsdb1 init.d]# mount -t ocfs2 /dev/sdc1 /hr_data
mount.ocfs2: No such device while mounting /dev/sdc1 on /hr_data
The same thing happens going through the ocfs2console.
Thanks,
David

Did you get anwer for this error? I got same error. Thanks in advance.

Report for counting the number of interfaces in each device

Hi, we have LMS 4.0.1 and we would like to know how many gigabitEthernet interfaces and how many fastEthernet interfaces does each device have. If we create a custom report template with the conditions "Interface:Type:Contains:Gi" OR "Interface:Type:Contains:Fa" we get the interfaces that match the criteria but we also need the count, and this is what we don't know how to do it.
Does anyone know how can we do it?

Hi
Suppress results rows for number of items..that is 10,20...
Calculate result rows only for sales order ...1000000...
You should get intended result with this settings
Regards
N Ganesh

Kernel compiling - mount failed: No such device?

Hello everyone!
I'm having an issue with mounting the linux kernel I've just compiled. What I've done:
- I've patched linux-2.6.33.3 with patch-2.6.33.3-rt19 by issuing bzcat ../patch-2.6.33.3-rt19.bz2 | patch -p1
- sudo make -j4 all
- sudo make modules_install
- sudo mkinitcpio -g /boot/kernel26rt.img -k 2.6.33.3-rt19
- sudo cp ./arch/x86/boot/bzImage /boot/vmlinuz2.6.33.3x86-rt
- sudo cp ./System.map /boot/System.map2.6.33.3x86-rt
- sudo rm /boot/System.map
- sudo ln -s /boot/System.map2.6.33.3x86-rt /boot/System.map
- Edit grub/menu.lst:
# (0) Arch Linux
title Arch Linux2
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-label/root ro
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-label/root ro
initrd /kernel26-fallback.img
# (2) Windows
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
# (3) RT Kernel
title RT Linux
root (hd0,2)
kernel /vmlinuz2.6.33.3x86-rt root=/dev/disk/by-label/root ro
initrd /kernel26rt.img
Now when I select the rt kernel from grub, it fails with:
mount: mounting /dev/disk/by-label/root on /new_root failed: No such device
Can anyone help me figure out what went wrong?
-nonpoly

http://www.cs.bgu.ac.il/~arik/usail/net … /tips.html
Look under "Common NFS Errors"
I'm guessing you haven't installed nfs-utils and portmap on the client. Or you haven't started them. In the right order (portmap, then nfslock - you don't need to start nfsd on the client)

Error: no such device 36A84D5EA84D1DAD

Hi,
I have both win7 professional and ubuntu 11.10 on my t410i.
Everything was ok, till I try onHackMe and it recognize some problems, it deleted my dlls and...After I restarted for finishing the task, my windows couldn't start....I deleted my c drive completely and restored my windows hardly to factory settings. Grub menu didn't change. And now both of Linux and windows works approximately good. But after I choose win7 in grub menu, before win startup I get this error:
"Error: no such device 36A84D5EA84D1DAD
Press any key to continue..."
It passing automatically after seconds, but I want to know what is it and how I can solve it?

HI shahrzad, (This should probably be in the Linux forum)
I'm guessing here, but this is probably because the UUID of the Windows partition has changed.
You might be able to fix it by booting Ubuntu and running update-grub.
Otherwise, try posting in a Ubuntu forum, or googling "ubuntu windows 7 grub Error: no such device uuid changed" or something similar.
[edit] This is just one of the reasons I miss grub legacy.
Good luck,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error: no such device: ece4aa52-a24f-4585-a448-f43320f58b05.

So I was installing Arch Linux on my Toshiba Satellite and when I got to the reboot part rather than showing me the normal grub screen so I could pick linux it said"
GRUB loading.
Welcome to GRUB!
error: no such device: ece4aa52-a24f-4585-a448-f43320f58b05.
Entering rescue mode...
grub rescue>
"Can someone PLEASE help me fix this?

Did you run:
# grub-mkconfig -o /boot/grub/grub.cfg
It is almost impossible to help you if it is not clear what you have actually done so far.
I presume you were following the Beginner's Guide to the letter...

Error no such device (after installation)

Dear all,
I'd like to gradually switch to Arch (from Ubuntu) so I decided to install it on a virtual machine (Virtualbox).
I followed the instructions in the "Unofficial Beginners Guide" and I thought I followed all the steps correctly.
The only thing that confused me a bit was the installation of the Virtualbox Kernel modules (to me from the guide it
is not clear if I have to install them in Ubuntu, the system from which I run the virtual machine, or in Arch the system
that is installed in the virtual machine).
Anyway I think I followed the procedure in the right way, and I didn't get any error message during the installation,
but apparently I made something wrong.
When I boot Arch, I get the GRUB menu. I select "Arch GNU/Linux with core repo kernel",
but I get this error message:
error no such device: (device id)
Loading Linux core repo...
error: no such partition
Loading initial ramdisk
error: you need to run the kernel first.
Press any key to continue...
When I press any key I get back to the GRUB menu.
If I select "Arch GNU/Linux, with core repo kernel (Fallback initramfs)"
I get the same error message.
Can you help me understanding where things might have gone wrong?
Thanks a lot in advance for your help,
and hopefully I'll join you soon in this Arch adventure
Best,
Luca

You downloaded it or you tried to flash (with LiveUpdate)?
Try >>clearing CMOS<<.

Network problem - [ SIOCADDRT: No such device ]

At first I apologize for this post - I know there are topics with similar problem, but I try to solve it according to their solutions and the problem is still here...
I don't know how to correctly set up my network.
When I try
/etc/rc.d/network start
, it gives me answer like this
SIOCADDRT: No such device
Network goes and doesn't... The centerim, ftp connections, internet radio - that all is working, but firefox displays nothing... sometimes yes, but I don't change something in system... It's weird...
When I try to run internet under Windows, everything work's fine...
Btw...I have router and 3 computers. Others are using windows and there are no problems with network...
I used Archlinux a year ago for few mounths and I was very satisfied. A week ago I try to install arch and without internet I can't use it...
Thx for any advice...
Please help.
Last edited by karmadoki (2008-05-27 06:33:06)

hi, when you use ftp connection and internet radio do you insert an IP address or a domain name?
because if it's firefox the problem isn't possible it's a DNS problem?
(I'm not an expert just wondering)
try to connect to google using it's ip address and tell us the result.
bye

Mount.nfs: No such device

I have setup nfs between Ubuntu and Arch linux. First beeing a server an later a client. When I try to mount with:
mount -t nfs 192.168.0.196:/media/disk movies
The error is mount.nfs: No such device
Is this server or client side problem.

http://www.cs.bgu.ac.il/~arik/usail/net … /tips.html
Look under "Common NFS Errors"
I'm guessing you haven't installed nfs-utils and portmap on the client. Or you haven't started them. In the right order (portmap, then nfslock - you don't need to start nfsd on the client)

Eth0: unknown interface: No such device

Similar Messages

Maybe you are looking for