Event error- CTI application

we added a new subscriber to our cluster, which appears to be fine, however an existing subscriber is now showing the following message in the event log.
Error: kCtiProviderOpenFailure - CTI application failed to open provider
CTIconnectionId: 52522
Login User Id: CCMSysUser
Reason code.: -1932787613
IPAddress:
App ID: Cisco CTIManager
Cluster ID: CCM20827-Cluster
Node ID: 172.21.0.4
Explanation: Application is unable to open provider.
Recommended Action: Check the reason code and correct the problem. Restart CTIManager if problem persists..
can anyone offer any insight, on whats causing this, or where to find out what the reason code actually means.
Ta

Hi Grant,
Here is a description of the event error, but I'll be darned if I can figure out what the reason code actually means.
Error Message: %CCM_CTI-CTI-3-kCtiProviderOpenFailure:
CTI application failed to open provider CTIconnectionId [Long], Login User Id [String], Reason code. [ ], IPAddress [String]
ExplanationThe application is unable to open a provider.
Recommended ActionCheck the reason code and correct the problem. Restart CTIManager if the problem persists.
This table displays the Enum definitions and reason codes.
Value
Definition
0
Unknown
0x8ccc0075
Directory response timeout
0x8ccc0060
Login Failed
0x8ccc005e
Directory unavailable
4
Undefined Line for authentication
5
User is deleted
6
Unknown
From this doc:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080111ac2.shtml#topic1
Hope this helps! Sorry I can't decipher this any further for you.
Rob
Please remember to rate helpful posts.......

Similar Messages

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

Event 1000, Application Error (Faulting application name: w3wp.exe - Faulting module name: KERNELBASE.dll)

Hello Guys,
While running a web application am getting an error like: Remote server not responding. Below are the details of event viewers which been captured at the same time when this error happened:
Event 1000, Application Error
Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb
Faulting module name: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1
Exception code: 0xe053534f
Fault offset: 0x000000000000a88d
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
Event 1001, Windows Error Reporting
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: w3wp.exe
P2: 7.5.7600.16385
P3: 4a5bd0eb
P4: KERNELBASE.dll
P5: 6.1.7600.16850
P6: 4e211da1
P7: e053534f
P8: 000000000000a88d
P9:
P10:
Attached files:
C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WERC9CE.tmp.hdmp
C:\Windows\Temp\WEREE30.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0
Analysis symbol:
Rechecking for solution: 0
Report Id: d46a6849-8f6a-11e1-98af-00215e6e4855
Report Status: 4
This is an priority issue which we are facing in IIS. IIS is configured for Framework 2.0 and underlying OS is - Windows
Server 2008 R2 Standard.This issue is replicable and occurring frequently Please suggest how to resolve it. Any input related to above issue is appreciable.

Please refer similar discussions and see if they help
Faulting application name: w3wp.exe
http://telligent.com/support/communityserver/community_server_2008/f/288/t/1067447.aspx
Event ID: 1000, Faulting application w3wp.exe, faulting module unknown,
http://social.msdn.microsoft.com/forums/en-US/clr/thread/9be88a2f-c8cc-4a73-9371-45ab73982123
For IIS related queries, please post them in IIS forum - http://forums.iis.net/
A UNIVERSE without WINDOWS is CHAOS !
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
About Me !!!

I upgraded i tunes and it crashed...in winows 32 bit ista home premimum and error is ...Problem signature:   Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     11.1.4.62   Application Timestamp:     52ddbf7a   F

i m using window vista32 after itunes upgrade.. itunes crash ..
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          11.1.4.62
Application Timestamp:          52ddbf7a
Fault Module Name:          ntdll.dll
Fault Module Version:          6.0.6000.16386
Fault Module Timestamp:          4549bdc9
Exception Code:          c0000005
Exception Offset:          00062086
OS Version:          6.0.6000.2.0.0.768.3
Locale ID:          16393
Additional Information 1:          a183
Additional Information 2:          96f68295953afa2675d1551e001cfa2f
Additional Information 3:          5630
Additional Information 4:          5482da5e28e2dc79b1d40bd90d8c9b

Fault Module Name:          ntdll.dll
Fault Module Version:          6.0.6000.16386
Even if you don't have any third-party plug-ins or add-ons, try opening iTunes in safe mode as per the instructions in the following document:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
If iTunes opens in safe mode, quit iTunes and then try launching it again normally. Does it launch without the error messages this time?

Local Event ERROR : oracle.apps.ar.applications.CashApp.

Hi,
I am getting frequent error notifications in my production system with error message:
Local Event ERROR : oracle.apps.ar.applications.CashApp.apply / oracle.apps.ar.applications.CashApp.apply_3336277_03-04-2012 14:31:15
these notifications are generated in 100's per day and reached more than 200 thousand now.
Please suggest how to resolve this issue.
Thank you.

Event Details.
Event Field Value
Event Name oracle.apps.ar.applications.CashApp.apply
Event Key oracle.apps.ar.applications.CashApp.apply_3491076_05-04-2012 13:19:33
To Agent
To System
From Agent
From System
Send Date 13-05-1433 13:19:33
Receive Date
Priority 0
Correlation ID
Parameter : USER_ID 1844
Parameter : RESP_ID 50862
Parameter : RESP_APPL_ID 222
Parameter : SECURITY_GROUP_ID 1107
Parameter : ORG_ID 127
Parameter : RECEIVABLE_APPLICATION_ID 3491076
Parameter : TRX_PS_STATUS CL
Parameter : RCPT_PS_STATUS OP
Parameter : TRX_DUE_DATE 2456052
Parameter : TRX_APP_AMT 1350
Parameter : ERROR_TYPE ERROR
Parameter : SKIP_ERROR_SUB 669603A288DE8CA7E040
Parameter : SUB_GUID A242DC2FF79D70A7E030

My itunes will not work and this is the error message. Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     QuickTime.qts_un

Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          11.0.1.12
Application Timestamp:          50c8fc7e
Fault Module Name:          QuickTime.qts_unloaded
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          4ea5d609
Exception Offset:          653f1040
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

Sharepoint FBA web application error: Server Error in '/' Application. when login to the web application

Hello Team,
I have configured FBA in SharePoint 2010. After the FBA i can get the SQL users using people picker and added users as a site collection admin.
When i tried to access the site, it shows login page and i have given user name and password then pressed signin button, it's try to redirect the another page and showing below error,
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "RemoteOnly". To enable the details to be viewable on remote machines, please set "mode" to "Off".

<configuration>
<system.web>
<customErrors mode="RemoteOnly"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="On" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
"An exception occurred when trying to issue security token: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.19 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'..
I checked sharepoint logs and didn't see any log. but i can see below error logged in Event viewer application logs,
I tried changing all customErrors mode and still same error.
Kindly help me on this, how to resolve the issue.
Thanks in advance.
JP

Hi,
According to your description, my understanding is that the error occurred when you accessed SharePoint site through form based authentication.
How did you configure the form based authentication?
Here is a link about the steps required to configure FBA in SharePoint 2010 for your reference, and check the steps to see if there anything wrong in your configuration:
http://www.codeproject.com/Articles/352841/How-to-Configure-Form-Based-Authentication-FBA-in
Through the common error message, we cannot find what exactly caused the error.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the?forum=sharepointgeneralprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Server Error in '/' Application. [COMException (0x81020024): Unable to connect to database]

Hi,
My team and I are trying to resolve this issue. some of our users are having trouble uploading data into the database. this is the error that they are getting.
I would really appreciate it if you could help me get ridd fo this issue.
Server Error in '/' Application.
Unable to connect to database. Check database connection information and make sure the database server is running.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.Runtime.InteropServices.COMException: Unable to connect to database. Check database connection information and make sure the database server is running.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[COMException (0x81020024): Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequestInternalClass.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId,
String bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +0
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +359
[SPException: Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +479
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +666
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +548
   Microsoft.SharePoint.SPWeb.EnsureSPRequest() +75
   Microsoft.SharePoint.SPWeb.get_Request() +74
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +613
   Microsoft.SharePoint.WebControls.SPControl.GetContextWeb(HttpContext context) +41
   Microsoft.SharePoint.SPContext.get_Current() +123
   CKS.EBE.BlogContext.get_BlogEnabledSite() +37
   CKS.EBE.BlogHttpModule._app_PostAuthorizeRequest(Object sender, EventArgs e) +113
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
the description of the error on the server is as follows:
The description for Event ID ( 27745 ) in Source ( Windows SharePoint Services 3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use
the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: #50071: Unable to connect to the database MOSS_Content_RBI on BartDB\Bart. Check the database connection information
and make sure that the database server is running..

are you using the Aliases for the SQL Server, make sure your account having the correct permission.
If it is your QA farm, you can run the config wizard to fix his problem...
check this post having the similar issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/478d6b3a-a51e-48c5-832b-5afb51c69734/unable-to-connect-to-the-sql-content-database-from-sharepoint-web-front-server?forum=sharepointadminlegacy
http://hammad1.wordpress.com/2008/06/04/unable-to-connect-to-database-in-event-logs/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     StackHash_0a9e   Fault Module Version:     0.0.0.0   Fault Module Times

ITunes app crashed after startup with following errors.
Problem signature:
Problem Event Name:                        BEX
Application Name:                             iTunes.exe
Application Version:                           11.0.1.12
Application Timestamp:                     50c8fc7e
Fault Module Name:                          StackHash_0a9e
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  00000000
Exception Offset:                                00000000
Exception Code:                                  c0000005
Exception Data:                                   00000008
OS Version:                                          6.1.7601.2.1.0.256.4
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Any ideas, tried reinstalling ITunes, no change.

I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

Hi i have a problem with itunes stopped working have tryed reinstalling downloaded new windows drivers this is the problem on control boardProblem Event Name: APPCRASH Application Name: iTunes.exe Application Version: 11.0.1.12 Application Ti

hi tryed reistalling itunes drivers repairing itunes etc any help would be greatly apreciated thankyou..
Problem Event Name:
APPCRASH
Application Name:
iTunes.exe
Application Version:
11.0.1.12
Application Timestamp:
50c8fc7e
Fault Module Name:
MSVCR80.dll
Fault Module Version:
8.0.50727.6195
Fault Module Timestamp:
4dcddbf3
Exception Code:
c0000005
Exception Offset:
0001500a
OS Version:
6.0.6002.2.2.0.768.3
Locale ID:
1033
Additional Information 1:
fd00
Additional Information 2:
ea6f5fe8924aaa756324d57f87834160
Additional Information 3:
fd00
Additional Information 4:
ea6f5fe8924aaa756324d57f87834160

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

CS5 has stopped working pop up everytime when selecting fonts. details: Problem signature:   Problem Event Name:APPCRASH   Application Name:Illustrator.exe   Application Version:15.1.0.39   Application Timestamp:4d76c9e3   Fault Module Name:CoolType.dll

Stops responding, etc
details
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Illustrator.exe
Application Version:    15.1.0.39
Application Timestamp:    4d76c9e3
Fault Module Name:    CoolType.dll
Fault Module Version:    5.7.83.9418
Fault Module Timestamp:    4c296b69
Exception Code:    c0000005
Exception Offset:    00021ae1
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    1033
Additional Information 1:    8e1b
Additional Information 2:    8e1b636bd3438ac15d03ef1549553b25
Additional Information 3:    1b31
Additional Information 4:    1b316dab8b65bf468124c367b4a50e14

But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error.

12344 & 12339 Error SRMSVC Application

Hi there,
We have just built a new file server on Windows Server 2012. We can see in the Application event log repeated 12344 and 12339 SRMSVC application errors occuring.
Examples of what we're seeing include:
HALFS
12344
Error
SRMSVC
Application
21/04/2015 11:04:20 AM
File Server Resource Manager finished syncing claims from Active Directory and encountered errors during the sync (0x80072030, There is no such object on the server.
). Please check previous event logs for details.
And this one:
HALFS
12339
Error
SRMSVC
Application
21/04/2015 11:04:20 AM
File Server Resource Manager failed to find the claim list 'Global Resource Property List' in Active Directory (ADsPath: LDAP://XXXDC01.XXX.com.au/CN=Global Resource Property List,CN=Resource Property Lists,CN=Claims Configuration,CN=Services,CN=Configuration,DC=XXX,DC=com,DC=au).
Please check that the claims list configured for this machine in Group Policy exists in Active Directory.
Further reading of the forums suggest that these errors should be suppressed and ignored but shouldn't there be some sort of fix for this? It is an obvious issue that needs to be addressed.
If anyone's come across this, we would be most interested in knowing how you addressed it.

Hi SB,
Do you have 2012 or 2012R2 domain controllers? If no, it's normal.
Please try to update schema version by running adprep /forestprep and adprep /domainprep.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Event 701 - The Application Impact Telemetry (AIT) Agent is not running because AIT is disabled.

In a survey of several Windows 7 systems, in the Application-Experience Program-Telemetry log, I found daily instances of Information Event 701 "The Application Impact Telemetry (AIT) Agent is not running because AIT is disabled". The trigger
for this event is execution of the built-in scheduled task to run Aitagent.exe daily at 02:30.
The message "AIT is disabled" is puzzling to me.
I checked participation in the Customer Experience Improvement Program (CEIP) on the idea that a setting to disable participation could translate into "AIT is disabled", but CEIP is set to Yes (participate).
I checked Windows Error Reporting settings - they are set to "Automatically check for solutions and send additional report data, if needed"
I checked the REG_DWORD value AITEnable in HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\AIT is set to 0x1, which should indicate that AIT is enabled.
I would appreciate if anyone can explain where/how AIT is disabled.
Thanks

Arthur Xie-
Thank you for suggesting installing the
Microsoft Application Compatibility Toolkit 5.6 (ACT). This is quite an enterprise-level program (the Step-by-Step guide says "We
recommend that you collect your data from approximately 10,000
computers")!
Anyway, installing the ACT and sending an empty data set to Microsoft worked, but did not eliminate Event 701 when the scheduled task to run AitAgent.exe executed
(as scheduled or manually) or when AitAgent.exe was run from an Administrator command prompt.
Since the scheduled task to run AitAgent.exe is part of a out-of-box installation of Windows 7, and its description states "Aggregates and uploads Application Telemetry
information if opted-in to the Microsoft Customer Experience Improvement Program", it would seem that it would run without error, at least when participation in the CEIP is enabled.

Struts 2 - SEVERE: Error configuring application listener of class mailread

Struts 2 - SEVERE: Error configuring application listener of class mailreader2.ApplicationListener
Ol�
Hi
All
I'm getting this erro: when I run my app in struts 2, but I don't know what is going on ?
Someone can help me
What is going on?
Thanks
SEVERE: Error configuring application listener of class mailreader2.ApplicationListener
java.lang.ClassNotFoundException: mailreader2.ApplicationListener
 at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1358)
 at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1204)
 at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3773)
 at org.apache.catalina.core.StandardContext.start(StandardContext.java:4337)
 at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
 at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
 at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
 at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
 at org.apache.catalina.core.StandardService.start(StandardService.java:516)
 at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
 at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
 at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Feb 1, 2008 10:46:31 AM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Skipped installing application listeners due to previous error(s)
Feb 1, 2008 10:46:31 AM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Edited by: NetoJose on Feb 1, 2008 5:33 AM

I think it's not a jar it's a java class on my package take a look, now i don�t know why the problem?
Look the erro :
Struts 2 - SEVERE: Error configuring application listener of class mailreader2.ApplicationListener
this is my package and a java class:
mailreader2.ApplicationListener
package mailreader2;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import org.apache.struts.apps.mailreader.dao.impl.memory.MemoryUserDatabase;
import javax.servlet.ServletContext;
import javax.servlet.ServletContextEvent;
import javax.servlet.ServletContextListener;
import java.io.*;
public final class ApplicationListener implements ServletContextListener {
* Appication scope attribute key under which the in-memory version of
* our database is stored.
public static final String DATABASE_KEY = "database";
* Application scope attribute key under which the valid selection
* items for the protocol property is stored.
public static final String PROTOCOLS_KEY = "protocols";
// ------------------------------------------------------ Instance Variables
* The <code>ServletContext</code> for this web application.
private ServletContext context = null;
* The {@link MemoryUserDatabase} object we construct and make available.
private MemoryUserDatabase database = null;
* Logging output for this plug in instance.
private Log log = LogFactory.getLog(this.getClass());
// ------------------------------------------------------------- Properties
* The web application resource path of our persistent database storage
* file.
private String pathname = "/WEB-INF/database.xml";
* Return the application resource path to the database.
* @return application resource path path to the database
public String getPathname() {
return (this.pathname);
* Set the application resource path to the database.
* @param pathname to the database
public void setPathname(String pathname) {
this.pathname = pathname;
// ------------------------------------------ ServletContextListener Methods
* Gracefully shut down this database, releasing any resources that
* were allocated at initialization.
* @param event ServletContextEvent to process
public void contextDestroyed(ServletContextEvent event) {
log.info("Finalizing memory database plug in");
if (database != null) {
try {
database.close();
} catch (Exception e) {
log.error("Closing memory database", e);
context.removeAttribute(DATABASE_KEY);
context.removeAttribute(PROTOCOLS_KEY);
database = null;
context = null;
* Initialize and load our initial database from persistent
* storage.
* @param event The context initialization event
public void contextInitialized(ServletContextEvent event) {
log.info("Initializing memory database plug in from '" +
pathname + "'");
// Remember our associated ServletContext
this.context = event.getServletContext();
// Construct a new database and make it available
database = new MemoryUserDatabase();
try {
String path = calculatePath();
if (log.isDebugEnabled()) {
log.debug(" Loading database from '" + path + "'");
database.setPathname(path);
database.open();
} catch (Exception e) {
log.error("Opening memory database", e);
throw new IllegalStateException("Cannot load database from '" +
pathname + "': " + e);
context.setAttribute(DATABASE_KEY, database);
// -------------------------------------------------------- Private Methods
* Calculate and return an absolute pathname to the XML file to contain
* our persistent storage information.
* @throws Exception if an input/output error occurs
private String calculatePath() throws Exception {
// Can we access the database via file I/O?
String path = context.getRealPath(pathname);
if (path != null) {
return (path);
// Does a copy of this file already exist in our temporary directory
File dir = (File)
context.getAttribute("javax.servlet.context.tempdir");
File file = new File(dir, "struts-example-database.xml");
if (file.exists()) {
return (file.getAbsolutePath());
// Copy the static resource to a temporary file and return its path
InputStream is =
context.getResourceAsStream(pathname);
BufferedInputStream bis = new BufferedInputStream(is, 1024);
FileOutputStream os =
new FileOutputStream(file);
BufferedOutputStream bos = new BufferedOutputStream(os, 1024);
byte buffer[] = new byte[1024];
while (true) {
int n = bis.read(buffer);
if (n <= 0) {
break;
bos.write(buffer, 0, n);
bos.close();
bis.close();
return (file.getAbsolutePath());
Edited by: NetoJose on Feb 1, 2008 7:25 AM

Event error- CTI application

Similar Messages

Maybe you are looking for