Event Log shows error - AuditWriter

Taking a look at the server's event log revealed the error message below, which has been showing up for a while. Does anyone have any insight into this error?
==============[System Error Tracing]==============
[System  Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditWriter/LogDataChangesFromSendG
[DateTime]     : 11/5/2008 1:55:09 PM
[UserId]       :
[Exception]
    DetailMsg  : {Object reference not set to an instance of an object.}
==============[System Error Tracing  End ]==============

Make sure the reporting services is working properly.
You have to open in internet explorer the page: http://nameofserver/reports.
If you don't receive any error opening this page that's measn the reporting services is working well.
If you are receiving an error then you have to check the configuration of reporting services.
Kind Regards
Sorin Radulescu

Similar Messages

  • While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

    Hi Friends,
    OS = Windows XP 3
    Database = Oracle 11g R2 32 bit
    Processor= intel p4 2.86 Ghz
    Ram = 2 gb
    Virtual memory = 4gb
    I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it..... 
    ORA-28056: Writing audit records to Windows Event Log failed Error  and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
    Please some one help me out, as i need to install on the same machine .....
    Thanks and Regards

    AAP wrote:
    Thanks Now I am able to Create a database , but with one error,
    When I created a database using DBCA, at the last stage I got this error,
    Database Configuration Assistant : Warning
    Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it.  Start the listener & Registered database service & run EM Configuration Assistant again....
    But when I checked the listener was up.....
    Now what was the problem,  I am able to connect and work through sqlplus,
    But  I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
    Thanks & Regards
    Creation of the dbcontrol requires a connection via the listener.  When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete.  Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
    Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)?  That needs to be the first order of business.

  • Tecra S10 - event log shows several errors

    My Tecra S10-167 has a problem for some weeks now. In the event log I get several errors, but mostly this one:
    Provider
    [ Name] atapi
    - EventID 11
    [ Qualifiers] 49156
    Level 2
    Task 0
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2011-02-14T18:20:12.558505100Z
    EventRecordID 3020
    Channel System
    Security
    - EventData
    \Device\Ide\IdePort0
    0000100001000000000000000B0004C002000000850100C000 00000000000000000000000000000000000000000000000000 000004100000
    My laptop is giving me fatal errors and it reboots by itself.
    Can anyone help me to solve this problem? Please guide me through this since I don't know a lot about computers.
    I already reinstalled windows 7 without any result.
    Thanks...

    Hey,
    If you have already reinstalled Windows but without success the case is clear in my opinion: Its a serious hardware malfunction.
    Its really hard to say what the problem is but theoretically the RAM modules could be affected. This you can check using Memtest86 diagnostic tool and the HDD you can check using other tools like Drive Fitness Test.
    But generally speaking if your notebook is under warranty give your notebook to an ASP and let the guys check the unit. Thats easier ;)

  • 'There are no events to show' error on the iOS BT ...

    Hi all,
    Some of you may have seen this error message 'there are no events to show' when using the BT Sport app via an Apple device. If you have, please follow the advice below to fix it.
    1)      Go into your device’s settings;
    2)      Change the clock time to 24 hours, and the time on your device time zone to “automatic”;
    3)      Log out of the app and log back in (note, you do not need to uninstall/re-install the app);
    4)      The app will then start to work, provided you have enough WIFI signal.
    If you do not have enough WI-FI signal, you can use 3G (which is subject to your network’s charges), but you need to remember to activate the streaming content by choosing “General enable mobile streaming” in the app, otherwise 3G won’t work.
    Thanks
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

    jelect,
    What kind of triggering did you want for the mic input on your PDA? did you want to start acquiring when someone starts speaking, or something along those lines? If that's the case, then what you could do is continually call the SI Read.vi and poll to see if the voltage changes by a certain amount. Then, when that happens, do any processing that you need to.
    As for the Peak Detector VI, here is the link to a knowledgebase on our website discussing this issue: http://digital.ni.com/public.nsf/websearch/EE144F58DCBE406B86256F1F00669514?OpenDocument
    I hope this helps. have a great day!
    Tyler S

  • SCCM 2012 R2 - WindowsUpdate.log showing error 0x80240037

    Hi,
    Setup details:
    1) OS: Windows 2012 R2
    2) SCCM version: SCCM 2012 R2 with SUP role (WSUS v6.3.9600.16384)
    3) SQL: SQL 2012
    All the above resides on a single machine.
    Error description:
    Windows 2012 R2 Server clients are not reporting back to the server. "Required" column is showing "0" for all security updates. Investigation in the WindowsUpdate.log shows "WARNING: Failed to get WU Exemption info from NLM,
    assuming not exempt error = 0x80240037".
    Latest updates are downloaded, synchronized and deployed via SUP but the clients are not receiving the updates. Please advise. Thanks.
    Regards,
    KL

    Hi,
    You may check the following blog.
    http://blogs.technet.com/b/sus/archive/2012/09/05/additional-note-on-kb-2734608-regarding-wsu-windows-8-and-windows-server-2012.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • S7 event log Protocol Error: Handheld File could not be opened (4004)

    Every time I do a hotsync now, I get an error message indicating that two files were not successfully back up: "S7 Event Log" and "EX_New Stories".  Both inidcate "Protocol Error: Handheld File could not be opened (4004)."  Does anybody know how to fix this?
    Post relates to: Centro (Sprint)

    No need to complicate the Forum with duplicate posts...
    Using the Search function here on the Forum, you'll find many posts that offer solutions to your problem.  I searched for "4004", and found many matches.
    One like this one may help.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • SM21 System Log shows error

    Dear All,
    We are having SAP ECC 6.0 which is on Microsoft Windows Server 2003 R2 Enterprise x64 Edition. The Oracle is 10.2.0.2.0. The SAP_Basis is 700 & level is 10.
    The SM21 System Log shows below text in log which appears in transactions,
    Enqueue: Transfer error while reading lock entries
    > Destination: eccprd_PRD_00                     
    > ENQUE_READ exception code: 4                   
    > RFC error when sending logon dat               
    > a.                                             
    You are requested to kindly look into the above error and provide your help to resolve this issue.
    I am awaiting for your valuable feedback for the above.
    Regards
    Pikal

    Hi Deepak,
    I have refereed the SAP Note as you said, however our SAP_Basis Release is 700, Level 10 SAPKB70010.
    The SAP Note says SAP_Basis Release 702,730 & 731 and our is 700. Kindly go through for the same.
    Thanks for your helping.
    Regards
    Pikal

  • CVI crashes - event log shows [FATAL] [LW_UAE_Handler] [..\jeff\i386\except.c:161] Assertion failed: 0.

    Hello,
    When calling lua_error(L) (pushing a Lua error in an embedded lua interpreter in my CVI code), I have been encountering a complete crash.  Not only does my code stop running, but the full CVI 9.1.1 IDE crashes without even an error message.  When I look in the windows xp event log I find the following:
    The description for Event ID ( 0 ) in Source ( CVI ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [16:45:30.768] [FATAL] [LW_UAE_Handler] [..\jeff\i386\except.c:161] Assertion failed: 0.
    When I recompile my project with visual studio, the identical code does not crash or cause any problems.  Any insite on this problem would be greatly appreciated.
    thanks,
    Alex Corwin

    Hello Alex,
    Could you try to generate a crash dump? Also, here is a community example of code using an embedded interpreter LUA in a LabWindows/CVI Project.
    Regards,
    Jeff L.
    Applications Engineer | National Instruments

  • AppleScript Editor -- Event Log shows only Result

    The Event Log pane at the bottom of the AppleScript Editor window shows only the result after I run a script, regardless of whether I choose the "Result" button or the "Events" or "Replies" buttons. I've only recently begun consulting the Event Log regularly, so maybe I'm not completely familiar with how it's supposed to work. But I'm fairly certain that, until yesterday, after I ran a script, the Event Log would show a detailed log of the script in action, and if I clicked on the "Replies" button, it would also show the result of each line. Isn't that how it's supposed to work?
    For example, if I run this script:
    tell application "Finder"
              get version
    end tell
    In the bottom pane, with "Events" and "Replies" selected, all I see is this:
    Result:
    "10.8.2"
    Shouldn't I see more than that? I'm sure that in the past I've seen actual lines from the script in that window.
    Thanks.

    The Events button will show Apple Events such as tell statements and display dialog commands, while the Replies button will show the reply to those events.  The Result button just shows the result of the script, which is the value returned (or the last value of the (internal predefined) result property).
    The Events History window isn't really meant to be a debugging console, but you can also add your own entries there by using the log command.

  • In system log shows Error in technical configuration Error during the ret

    Hi,
    In sm21 it shows <Error in technical configuration Error during the retieval of logon data stored in>.
    Task...... Process                     User...... Terminal Session TCode Program        Cl Problem cl         Package
    30808      Dialog work process No. 009 SAPSYS                    1       TASK_VITAL_RUN K  SAP Web AS Problem SOAP_FT_TOOLS
    In wp trace shows below with the matched time:
    A Thu May 26 13:08:03 2011
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: end RX_GET_MESSAGE
    H
    H Thu May 26 13:08:05 2011
    H  *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
    [icftrace.c   597]
    H  *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
    [icftrace.c   597]
    H
    H Thu May 26 13:08:09 2011
    H  *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
    [icftrace.c   597]
    H
    H Thu May 26 13:08:10 2011
    H  *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
    [icftrace.c   597]
    H
    H Thu May 26 13:08:12 2011
    H  *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
    [icftrace.c   597]
    H
    H Thu May 26 13:08:13 2011
    H  *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
    [icftrace.c   597]
    H
    H Thu May 26 13:08:15 2011
    H  *** ERROR => HTTP> IcfGetDTFromTaskHandler: ThEppGetRootContextIdAsXuuid failed with (98)! [icfutil.c   1660]
    [icftrace.c   597]
    Kind of error when retrieve the logon data.
    Kernel 711  PI system
    SP level 04
    What possibily casued this? No further information I can have.
    Thanks,
    Emma

    Hello
    Please implement the latest kernel for your release. See note #19466. The error will not occur with the latest kernel patch.
    Regards
    Mark

  • CCM.LOG Showing Errors Connecting to Server (Error 5 - Access Denied) to \\\admin$ Share

    Hi All!
    We are encountering what I think would be a normal error in most cases if a client is unavailable or offline.  During client push, we are receiving errors connecting to a NULL value in the log (\\\admin$) as opposed to an actual client:
    Under normal circumstances, the log should read as follows:
     Attempting to connect to administrative share
    \\<machine_name>\admin$ using <Client Push Account>.
    What we are running into is a repeating error (with some processed CCR records in between) that shows as follows:
    ~ Doing Account Cleanup Operation .... SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
    ~ Processing domain DOMAIN1 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
    ~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Processing domain DOMAIN2 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Processing domain DOMAIN3 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    ~ Account Cleanup Operation Completed successfully. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
    We have Three Domains (Domain1, Domain2, and Domain3) with service accounts specified in the Client Push Installation Client properties. 
    I don't know if there is an entry (or entries) in the SCCM database that are NULL or blank that is generating these errors. 
    \\\admin$ indicates, to me, that there is a missing machine name that should follow the two \\ and before the \admin$.  Obviously we aren't going to be able to connect to a machine with no name (hence the Failed to Connect to Server.  Error
    5). 
    Is there a way to clean the database of these empty records and fix this recurring error?  It repeats every 15 minutes.
    Thank you!

    Yes, I know this is an old post, but I’m trying to clean them up.
    I would review the CM07 console to see if there are any device without a netbios name. It will be these device that are cause you problems.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Preview app fails to open any file, console log shows errors messages

    Hi,
    I backed up my old mac using TimeMachine and restored the TimeMachine image to my newly purchased iMac running 10.9.4.  There were no errors during restoration, however when I try to open a file with the Preview app (such as a jpeg file), Preview app doesn't open the file and emits a variety of errors to the console log as below. 
    Is there a way to clear the state of the Preview app so I can fix this issue and use the Preview app to open images again?  These image files open fine in Chrome, but I can't seem to use Preview to open any files. 
    Not sure if this is a bug with system restore or a bug in the new OS.  Any ideas?  Thanks in advance for any advice.
    -Norm
    8/2/14 10:35:10.981 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.981 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.982 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.982 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.982 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.982 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.982 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.983 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.983 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:35:10.983 PM Preview[2007]: Critical failure: the LastResort font is unavailable.
    8/2/14 10:38:10.886 PM System Information[2440]: Can't open input server /Library/InputManagers/CTLoader
    8/2/14 10:41:23.779 PM QuickLookUIHelper[2446]: Can't open input server /Library/InputManagers/CTLoader
    8/2/14 10:41:23.800 PM Preview[2007]: *** +[NSLayoutConstraint constraintWithItem:attribute:relatedBy:toItem:attribute:multiplier:constant:]: Constraint must contain a first layout item
    8/2/14 10:41:33.561 PM Preview[2007]: -[PVPreferencesController loadWindow]: failed to load window nib file '/Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib'.
    8/2/14 10:41:33.562 PM Preview[2007]: -[PVPreferencesController loadWindow]: failed to load window nib file '/Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib'.
    8/2/14 10:41:33.562 PM Preview[2007]: -[PVPreferencesController loadWindow]: failed to load window nib file '/Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib'.
    8/2/14 10:41:33.562 PM Preview[2007]: -[PVPreferencesController loadWindow]: failed to load window nib file '/Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib'.
    8/2/14 10:41:33.562 PM Preview[2007]: -[PVPreferencesController loadWindow]: failed to load window nib file '/Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib'.
    8/2/14 10:41:33.562 PM Preview[2007]: -[PVPreferencesController loadWindow]: failed to load window nib file '/Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib'.
    8/2/14 10:41:55.744 PM Preview[2448]: Can't open input server /Library/InputManagers/CTLoader
    8/2/14 10:41:55.793 PM Preview[2448]: *** +[NSLayoutConstraint constraintWithItem:attribute:relatedBy:toItem:attribute:multiplier:constant:]: Constraint must contain a first layout item
    8/2/14 10:41:56.100 PM Preview[2448]: *** +[NSLayoutConstraint constraintWithItem:attribute:relatedBy:toItem:attribute:multiplier:constant:]: Constraint must contain a first layout item
    I also can't even get the Preview 'about' info to show:
    8/2/14 10:52:03.330 PM Preview[2461]: Failed to load NSSystemInfoPanel.nib
    One file it is complaining about is present and appears to be readable
    $ ls -l /Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib
    -rw-r--r--  1 root  wheel  53421 Jun 28 01:33 /Applications/Preview.app/Contents/Resources/Base.lproj/PVPreferences.nib

    Hi,
    I tried both suggestions, but they didn't resolve the issue.   Thank you both for trying to help.
    The font tool was crashing when I tried to validate my font files.  I looked and I didn't see the font in question listed in that tool.  Crash stack is below.
    I reinstalled the OS per Linc's instructions, but Preview still is crashing when opening a jpeg file.  Crash stack is below.
    Weirdly, most everything else seems to work okay: mail, safari, chrome, etc, all seem to function with no issue.  The font tool isn't something I care about, but Preview app is something I use to review my pictures, etc. 
    Any other suggestions?  Is there a good alternative app I should use in the meantime to replace Preview while I get to the bottom of the problem and resolve it?
    Thanks,
    Norm
    Preview crash:
    Process:         Preview [533]
    Path:            /Applications/Preview.app/Contents/MacOS/Preview
    Identifier:      com.apple.Preview
    Version:         7.0 (826.4)
    Build Info:      Preview-826004000000000~2
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [239]
    Responsible:     Preview [533]
    User ID:         501
    Date/Time:       2014-08-04 11:51:56.926 -0700
    OS Version:      Mac OS X 10.9.4 (13E28)
    Report Version:  11
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    VM Regions Near 0:
    -->
        __TEXT                 0000000107e19000-0000000107ffd000 [ 1936K] r-x/rwx SM=COW  /Applications/Preview.app/Contents/MacOS/Preview
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_platform.dylib       0x00007fff8e13e225 _platform_memcmp + 293
    1   com.apple.CoreGraphics         0x00007fff89b4b760 CGColorTransformConvertColorComponents + 150
    2   libRIP.A.dylib                 0x00007fff88ed9e77 ripc_GetColor + 2041
    3   libRIP.A.dylib                 0x00007fff88ed93d4 ripc_Render + 156
    4   libRIP.A.dylib                 0x00007fff88ed52e1 ripc_DrawRects + 399
    5   com.apple.CoreGraphics         0x00007fff89b48d2a CGContextFillRects + 96
    6   com.apple.CoreGraphics         0x00007fff89b48b76 CGContextClearRect + 60
    7   com.apple.HIToolbox           0x00007fff87fa8ab1 HIMenuBarView::DrawOnce(CGRect, CGRect, bool, bool, bool, bool, CGContext*) + 139
    8   com.apple.HIToolbox           0x00007fff87fa89ed HIMenuBarView::DrawSelf(short, __HIShape const*, CGContext*) + 899
    9   com.apple.HIToolbox           0x00007fff87fa850a HIView::DrawCacheOrSelf(short, __HIShape const*, CGContext*) + 360
    10  com.apple.HIToolbox           0x00007fff87fa8394 HIView::SendDraw(short, OpaqueGrafPtr*, __HIShape const*, CGContext*) + 384
    11  com.apple.HIToolbox           0x00007fff87fa7d06 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned int, HIView*, CGContext*, unsigned char, double) + 696
    12  com.apple.HIToolbox           0x00007fff87fa7f75 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned int, HIView*, CGContext*, unsigned char, double) + 1319
    13  com.apple.HIToolbox           0x00007fff87fa6c49 HIView::DrawComposited(short, OpaqueGrafPtr*, __HIShape const*, unsigned int, HIView*, CGContext*) + 689
    14  com.apple.HIToolbox           0x00007fff87fa6992 HIView::Render(unsigned int, CGContext*) + 54
    15  com.apple.HIToolbox           0x00007fff87fa60e8 WindowData::PrepareForVisibility() + 146
    16  com.apple.HIToolbox           0x00007fff87fa4f8b _ShowHideWindows + 287
    17  com.apple.HIToolbox           0x00007fff87fa4e66 ShowHide + 34
    18  com.apple.HIToolbox           0x00007fff87f97239 MBWindows::CreateWindow(CGRect, unsigned int) + 389
    19  com.apple.HIToolbox           0x00007fff87f96e26 MBWindows::GetWindowIDOnDisplay(unsigned int, unsigned char) + 184
    20  com.apple.HIToolbox           0x00007fff87f96c1e MenuBarInstance::ForEachWindowDo(void (unsigned int, unsigned int) block_pointer) + 164
    21  com.apple.HIToolbox           0x00007fff87f96977 MenuBarInstance::UpdateWindowBoundsAndResolution() + 155
    22  com.apple.HIToolbox           0x00007fff87f96521 MenuBarInstance::Show(MenuBarAnimationStyle, unsigned char, unsigned char, unsigned char) + 329
    23  com.apple.HIToolbox           0x00007fff87fc238b SetMenuBarObscured + 208
    24  com.apple.HIToolbox           0x00007fff87fc2024 HIApplication::HandleActivated(OpaqueEventRef*, unsigned char, OpaqueWindowPtr*) + 188
    25  com.apple.HIToolbox           0x00007fff87fc0c8d HIApplication::EventObserver(unsigned int, OpaqueEventRef*, void*) + 217
    26  com.apple.HIToolbox           0x00007fff87f8dac9 _NotifyEventLoopObservers + 155
    27  com.apple.HIToolbox           0x00007fff87fc0795 AcquireEventFromQueue + 527
    28  com.apple.HIToolbox           0x00007fff87fb46bd ReceiveNextEventCommon + 229
    29  com.apple.HIToolbox           0x00007fff87fb45bc _BlockUntilNextEventMatchingListInModeWithFilter + 65
    30  com.apple.AppKit               0x00007fff8e2e024e _DPSNextEvent + 1434
    31  com.apple.AppKit               0x00007fff8e2df89b -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
    32  com.apple.AppKit               0x00007fff8e2d399c -[NSApplication run] + 553
    33  com.apple.AppKit               0x00007fff8e2be783 NSApplicationMain + 940
    34  libdyld.dylib                 0x00007fff90c3f5fd start + 1
    Font tool crash:
    Process:         Font Book [606]
    Path:            /Applications/Font Book.app/Contents/MacOS/Font Book
    Identifier:      com.apple.FontBook
    Version:         5.0.1 (250.1)
    Build Info:      FontUtility-250001000000000~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [239]
    Responsible:     Font Book [606]
    User ID:         501
    Date/Time:       2014-08-04 11:59:29.407 -0700
    OS Version:      Mac OS X 10.9.4 (13E28)
    Report Version:  11
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000068
    VM Regions Near 0x68:
    -->
        __TEXT                 000000010f172000-000000010f21b000 [  676K] r-x/rwx SM=COW  /Applications/Font Book.app/Contents/MacOS/Font Book
    Application Specific Information:
    Performing @selector(validateFiles:) from sender NSMenuItem 0x6080000b0260
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.CoreFoundation       0x00007fff8974a319 CFBundleCopyLocalizedString + 201
    1   com.apple.FinderKit           0x00007fff8c39844c TString::SetFromKeyAndIndex(__CFString const*, __CFString const*, unsigned int) + 86
    2   com.apple.FinderKit           0x00007fff8c3247cf TFENode::Initialize() + 359
    3   com.apple.FinderKit           0x00007fff8c471488 +[FIFinderViewGutsController initializeCounted] + 124
    4   com.apple.FinderKit           0x00007fff8c47a4f9 -[FIFinderView _commonFinderViewInitForSaveMode:importPanel:appCentric:ubiquityContainerURLs:o ptions:] + 53
    5   com.apple.FinderKit           0x00007fff8c47a9de -[FIFinderView initWithFrame:options:] + 218
    6   com.apple.AppKit               0x00007fff8ebe35d0 -[NSNavFinderViewFileBrowser initWithFrame:options:] + 252
    7   com.apple.AppKit               0x00007fff8ebdbdd3 _NSNavFileBrowserWithFinderKit + 147
    8   com.apple.AppKit               0x00007fff8e910db3 -[NSSavePanel(NSSavePanelLayout) _makeFileBrowserView] + 302
    9   com.apple.AppKit               0x00007fff8e910f2d -[NSSavePanel(NSSavePanelLayout) _setupFileBrowserView] + 154
    10  com.apple.AppKit               0x00007fff8e912294 -[NSSavePanel(NSSavePanelLayout) _initContentView] + 4465
    11  com.apple.AppKit               0x00007fff8e8ffc39 -[NSSavePanel initWithContentRect:styleMask:backing:defer:] + 565
    12  com.apple.AppKit               0x00007fff8e8ff49a +[NSSavePanel _crunchyRawUnbonedPanel] + 205
    13  com.apple.FontBook             0x000000010f1a2826 0x10f172000 + 198694
    14  com.apple.AppKit               0x00007fff8e4fe260 -[NSApplication sendAction:to:from:] + 327
    15  com.apple.AppKit               0x00007fff8e5191c8 -[NSMenuItem _corePerformAction] + 394
    16  com.apple.AppKit               0x00007fff8e518f04 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 117
    17  com.apple.AppKit               0x00007fff8e56840d -[NSMenu _internalPerformActionForItemAtIndex:] + 35
    18  com.apple.AppKit               0x00007fff8e568289 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 104
    19  com.apple.AppKit               0x00007fff8e50eff6 NSSLMMenuEventHandler + 716
    20  com.apple.HIToolbox           0x00007fff87f8e1d4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 892
    21  com.apple.HIToolbox           0x00007fff87f8d787 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 385
    22  com.apple.HIToolbox           0x00007fff87fa1880 SendEventToEventTarget + 40
    23  com.apple.HIToolbox           0x00007fff87fd7640 SendHICommandEvent(unsigned int, HICommand const*, unsigned int, unsigned int, unsigned char, void const*, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) + 420
    24  com.apple.HIToolbox           0x00007fff8800a228 SendMenuCommandWithContextAndModifiers + 59
    25  com.apple.HIToolbox           0x00007fff8800a1d0 SendMenuItemSelectedEvent + 178
    26  com.apple.HIToolbox           0x00007fff8800a0af FinishMenuSelection(SelectionData*, MenuResult*, MenuResult*) + 94
    27  com.apple.HIToolbox           0x00007fff88012085 MenuSelectCore(MenuData*, Point, double, unsigned int, OpaqueMenuRef**, unsigned short*) + 718
    28  com.apple.HIToolbox           0x00007fff88011cb1 _HandleMenuSelection2 + 446
    29  com.apple.AppKit               0x00007fff8e48162c _NSHandleCarbonMenuEvent + 284
    30  com.apple.AppKit               0x00007fff8e2e052e _DPSNextEvent + 2170
    31  com.apple.AppKit               0x00007fff8e2df89b -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
    32  com.apple.AppKit               0x00007fff8e2d399c -[NSApplication run] + 553
    33  com.apple.AppKit               0x00007fff8e2be783 NSApplicationMain + 940
    34  com.apple.FontBook             0x000000010f1737fc 0x10f172000 + 6140
    35  libdyld.dylib                 0x00007fff90c3f5fd start + 1

  • Bluetooth not working, log shows error

    I have had bluetooth working for a long time, but some recent update has put a halt to this. I am using a Jabra BT dongle and HTC Touch Pro 2 phone, and blueman to send/receive files between the computer and phone. Now it does not work, and looking in /var/log/errors.log just now after trying, I see:
    May 16 17:47:30 localhost bluetoothd[2644]: input-headset driver probe failed for device 00:23:76:76:C0:D1
    May 16 17:51:58 localhost bluetoothd[2644]: Agent replied with an error: org.freedesktop.DBus.Python.glib.GError, Traceback (most recent call last):
    File "/usr/lib/python2.7/site-packages/dbus/service.py", line 702, in _message_cb
    retval = candidate_method(self, *args, **keywords)
    File "/usr/lib/python2.7/site-packages/blueman/main/applet/BluezAgent.py", line 180, in RequestPinCode
    self.ask_passkey(device, dialog_msg, notify_msg, False, True, ok, err)
    File "/usr/lib/python2.7/site-packages/blueman/main/applet/BluezAgent.py", line 137, in ask_passkey
    Notification(_("Bluetooth Authentication"), notify_message, pixbuf=get_icon("blueman", 48), status_icon=self.status_icon)
    File "/usr/lib/python2.7/site-packages/blueman/gui/Notification.py", line 189, in __new__
    return NotificationBubble(summary, message, timeout, actions, actions_cb, pixbuf, status_icon)
    File "/usr/lib/python2.7/site-packages/blueman/gui/Notification.py", line 173, in __init__
    self.show()
    GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .service files
    May 16 17:51:58 localhost bluetoothd[2644]: 00:23:76:76:C0:D1: error updating services: Invalid exchange (52)
    May 16 17:52:22 localhost bluetoothd[2644]: input-headset driver probe failed for device 00:23:76:76:C0:D1
    Not at all sure what to make of that, it does look python-related but that's all I can gleam. Appreciate any help, thanks

    try again here (use Type 1286 and s/n):
    http://www-947.ibm.com/support/entry/portal/wlup
    the output data are more informative.
    To be clear you can post the results here.
    Nevertheless, if you'll not find BT adapter within in laptop you can purchase it and install yourself during several minuts (of course if it's not a mistake of your seller or Lenovo who can want to correct that case).
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Server log shows error and warning 108 & 1085 every 5 minutes. Faile dto apply changes to software installation settings.

    Event: 108
    Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%2147746153
    Event: 1085
    Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
    This errors have been happening a long while and do not appear to be having any effects on our end users. However, they are making
    it very hard to sift through our log files as you could imagine! This DC is windows 2008 r2.
    If there is any other information needed, let me know. Thanks!

    In addition you can debug the software installation Policy easily.
    GPO Troubleshooting
    Also you can use the ADM/ADMX for GPO related issues (GPO DEBUG LOGGING).
    http://www.gpoguy.com/FreeTools/FreeToolsLibrary/tabid/67/agentType/View/PropertyID/85/Default.aspx
    http://www.gpoguy.com/FreeTools/FreeToolsLibrary/tabid/67/agentType/View/PropertyID/84/Default.aspx
    Use this tool for registry key change.
    http://www.gpoguy.com/FreeTools/FreeToolsLibrary/tabid/67/agentType/View/PropertyID/87/Default.aspx 
    I have tested all the above tools and all are working fine.
    Best regards Biswajit Biswas Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin

  • SQL Server Agent Log showing errors [298] SQLServer Error: 10061, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL

    Hi All,
    I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
    Can anyone guide me what could be the problem.
    Date                      17/4/2014 2:04:20 PM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
    and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
    Date                      17/4/2014 2:11:55 PM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error
    has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. [SQLSTATE 08001]
    Date                      7/4/2014 11:00:31 AM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error
    has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. [SQLSTATE 08001]

    Check this link
    http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
    Regards, RSingh

Maybe you are looking for

  • Questions regarding setup of new external drive in disk util?

    Hello I just got a new HD and external enclosure i will be using for storage. The Drive is a 500gb seagate sata in an Thermaltake max 4 enclosure that is hooked up via usb to my macbook. Now I have a few questions about how to best to format the driv

  • Time capsule losing internet connection

    Hey there, I've read other people with similar issues, but haven't found a solid resolution yet. Hoping you awesome Mac folks can help me out. It's slightly confusing, but please let me know what you think. Sorry this is long, just trying to give the

  • Need help animating line art/paths

    Help please... I am trying to animate a line, to have it tween/morph between a line and a question mark and then back to a line. I've drawn my two shapes in Illustrator as line art (as paths, not as closed shapes), but I'm not seeing the paths as a m

  • Problem in multiple PDF downloads in BSP.

    Hi,          My BSP application downloads the outputs of three smartforms as PDF files. The BSP contains three checkboxes and a button. Each checkbox is the option to download the output of a smartform. I have declared three Page Attributes - w_chk1,

  • RLS Solutions with BI Applications

    If I have customer that has a BI application that queries a table for say the average of the salary column. If they introduce a row-level security solution like VPD or OLS and a subset of the rows are redacted for that BI query (say policy is you onl