Every time I try to add album art work to some albums nothing happens, it's the same for the metadata. Nothing changes when I try to change artwork/genre/artist etc. Any help?
I can't change any of the metadata for some of my albums and see blank artwork really bugs me, I'm a little OCD about it.
That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.
Similar Messages
-
How can I remove music from my iPhone that's not on a playlist, or checked off in the Sync window in any of the possible categories (Playlist, genre, artist, etc)? HELP! It's taking up SO much space on my phone but I cannot see a way to remove any of it
If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. -
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
I had iphone 4 and now i have an iphone 4s. I had itunes on this pc and it worked fine with the 4. Now i keep getting error message 7 that it didn't install correctly. Help!!!!
I need my itunes now.Hello labnutt,
After reviewing your post, I have located an article that can help with errors in iTunes for Windows. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iTunes for Windows: "Error 7" message when opening iTunes - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I have ipad2 But can't get album art work on most albums.
I just converted my music library from windows media to iPad 2. Very few album artwork has come into the iPad. I have sync with itunes to obtain but no luck. Any ideas?
They don't make an OS X version of their software.
-
The problem is this. The security questions are unanswerable. So I ask for a security set via email. The email address apple have is non existant.....this seems impossible because how could it have been verified?
Any suggestions? I understand that IDs can't be merged, so will take that on board. Shame on you Apple!!Shame on Apple, because you messed up your Apple ID? Ridiculous.
Call Apple Care and ask for help resetting the security questions on your Apple ID. -
When i try to add music from itunes to my ipod, Itune tells me the music on my ipod came from a differnt libray and wants to erase my whole ipod. i just loaded my ipod two days ago. i don't want to replace everything every time i want to add two to songs. My MacBook Pro is the only autherized computer.
To prevent a sync when plugging in the iPod/iPhone - hold down the 'option' and the 'command' keys when plugging in the iPod/iPhone - key the keys down until the iPod/iPhone is listed under the Devices list in iTunes - this will prevent a sync from taking place and you will be able to change your settings.
MJ -
Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
If that's not what you see, post the contents of the window. -
Help syncing album art work driving me crazy
I got all my album art work up to date. I even went to the intenet and downloaded some art work I didn't have. I even made some art work so I can't see blank songs on my iphone. When I sync, I still have black songs (artwork) in itunes on my iphone and ipad when they clearly are on my mac book pro.
Is there something I am missing here?
I spent a lot of time gettng art work from the internet.Alright try this.
Connect Device to computer.
Click on iPhone under devices
Click music tab "Above picture of device in middle of the screen"
Uncheck Sync Music -Click Remove- click Apply.
Recheck Sync music - Click apply. -
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
I can no longer add album art work in iTunes version 10.6.0.40
WHY can I no longer add album art work in iTunes version 10.6.0.40? It is maddening. I have checked many boards and discussion groups but no one has a sure fix. Why is Apple not tending to this problem? They of all groups should know the importance of how something looks.
I had the the same problem albeit with an m4v (same hardware and OS rev too!, iTunes 10.6.3). I was able to add the movie to a new library per Limnos' suggestion here, indicating that iTunes wasn't totally busted. However, I was also able to see the movie in the Recently Added smart playlist (another hat tip to Limnos), although it still did not appear in the Movies section of my iTunes library. (It was also in the iTunes Library.xml file.)
So I called AppleCare, and they directed me to move the file from the external drive where it was living, into the /Users/<Your Name Here>/Movies directory, and to "Add to Library" (Command-O) from that location. Sure enough (and much to my surprise), it showed up immediately (duplicated, actually) in the Movies section of my iTunes library. Subsequent additions to my Library have not misbehaved similiarly. -
In po,every time i want to add the message for print out.
in po,every time i want to add the message for print out.
is there any permanent solution for above issues ?Hi,
1) use transaction nace
2)Select application EF and go to condition records
3) o/p type is neu , select the same and double click on it .
4) select paricular condition table.
5) maintain condition records , means for particular combination NEU should appear automatically in PO print. -
i forgot the password of my iphone 3g and when i try to restore it it shows the message"my iphone 3g could not be restored an unknown error occurred(1015)" can any body help please..
This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015
-
I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.
Maybe you are looking for
-
ODI topology connection error - oracle database
Hi, I'm trying to connect to oracle database installed on a remote server through odi client installed on my windows machine. Oracle db is on RHEL 64 bit, I believe. I know the connection details such as hostname, sid etc but i'm not able to establis
-
Lightroom 5 slideshow shows a black screen
Please help, I have upgrade to 5.2 but still have the same problem whith black screen.
-
SDK, sapnwrfc, C++, rfcclose and memory
Hello, can somebody help me? I have made a software in visual c++ 2005 using sapnwrfc.lib (release: i use the library in the file NWRFC_2-20002217.SAR, Version:7.11 patch 0). This software uses more and more memory each time I call RfcOpenConnection
-
Hi Team, We are sending data daily to data base table by using infospoke from the DSO with delta update. Now I want to load specific billing document numbers to that data base table by using infospoke. I want to load required billing document numbers
-
Attributes for the sys event EC_DEVICE_ADD
Hi, There are some changes in the Solaris 11 sysevent Attributes. How to know what are the attributes for the event EC_DEVICE_ADD. Earlier these were listed in dev.h now I do not find that header file on Solaris 11. -Sachin