Everything under network status failed

My wifi isnt turning on even though i do it manually so i cant even go into my safari,mail,or anything also when i go to network diagnostics everything under the network status are all red/failed and it doesnt even show on the startup page and tool bar which idk why be because this never happened before this on ly happened from a couple days ago till now

I have a similar problem! I moved into a new appartment not so long ago. The internet is included in the rent, therefor I'm connection on my landlords network. When I first got here, I had problems with the internet which eventually got fixed by changing the modem.
2 weeks ago, my landlords upgraded the internet to a faster one and ever since, I have been loosing my connection every 20 minutes or so and since yesterday, my MacPro litterally refuses to connect. It shows a very weak signal coming from the usual network I use and when I try to connect, it keeps on sending me the message that the connection delay has expired.
Thing is, I also have an Hp laptop and I have 0 connection problem with it. I have been loving my Mac so far, but right now I can't help but be frustrated about it.
Anybody has talked to someone at Apple or has gotten their problem fixed?!
MacPro specs; 2 x 2,66 Ghz Dual Core Intel processor with a 2GB memory and it runs on Mac OS X 10.6.2. For internet connection; AirPort Extreme.

Similar Messages

Network Status: Port Restricted???

So my ichat one day I started noticing that it was getting fuzzy, so I went to look under Network Status and found that next to Router Type: it says "Port Restricted" and i found out this could cause poor picture quality. How do i fix this I'm using a D-Link router if thats anything

Hi,
The Question mark at the top of Defcom's Pic will tell you more.
It is about the way your Routing device does NAT.
NAT (Network Address Translation) is not the same on every device. There is no standard as such.
iChat "prefers" Full Cone as it is called but I also have Port Restricted listed and have no problems
8:56 PM Wednesday; December 2, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9

Airport Network status says Internet failed and I can not connect wirelessly. Ethernet connection works fine. Why can't I connect?

A few days ago, my Airport Express wireless connection stopped working. The network status lights for Internet and Servers are RED and indicate failure. My Ethernet connection works fine. Any idea what my problem is?
Thanks,
LivingSuccess

You could try a Safe Boot - restart holding down the shift key until the grey progress bar appears. When it's booted restart as normal from the Apple menu.
If that doesn't help you could try an SMC reset:
SMC Reset
Shut down the computer.
Unplug the computer’s power cord and disconnect peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.

New HDD S.M.A.R.T. Status failing

Hello, Had a "S.M.A.R.T Status failing" warning last week. Bought back up disk to use with Time Machine. Brought the iMac into Apple for them to check it out and they ended up replacing the HDD and restoring everything on the disk as it was before we brought it in (apparently). When it was started up at the store, the same old beach ball appeared and the guy ensured us that was normal since it was a new install. Brought it home and looked under disk utilities and it still says "S.M.A.R.T Status failing" for that disk. There was no need to use our back-up from Time Machine as everything was still there. Is it possible that this disk was either not replaced, or it was replaced with another failing HDD? Or is there something that needs to be done to clear the SMART Status failing warning from the original back up from Apple store?The Genius at the store said it was replaced and that all we had to do was to do a restore from our backup. Anyone have any suggestions?

There is no value in guessing what happened at the store, the fact is you have a failing HD and need to take it back to be serviced. I would recommend speaking to the store manager to let him know what happened, do so in a calm, organized and friendly fashion though...you never may know when you need him as an ally. .

Failover Cluster Network Name Failed and Can't be Repaired

I have an issue that seem to be a different problem than any others have encountered.
I've scoured everything I can find and nothing has fixed my problem.
The problem starts with the common problem of the cluster network name failing on my 2 node server 2012 file server cluster. The computer object was still in AD and appeared to be fine so it was not the common problem of the object
getting deleted somehow. At the time, there was no other object with that name in the recycling bin, so I don't think it was mistakenly deleted and quickly recreated to cover any tracks, so to speak.
Following one guide, I tried to find the registry key that corresponded with the GUID of the object, but neither node in the cluster had it in its registry (which may be part of the problem).
Since it was in the failed state, I tried to do the repair on the object to no avail.
We run a "locked down" DC environment so all computer objects have to be pre-provisioned. They were all pre-provisioned successfully and successfully assigned during cluster creation. The cluster was running with no issues for a month
or so before this problem came up.
When I do a repair on the object while taking diagnostic logs the following 4609 error appears:
The action 'Repair' did not complete. - System.ApplicationException: An error occurred resetting the password for 'Cluster Name'. ---> System.ComponentModel.Win32Exception: Unknown error (0x80005000)
There appears to be a corresponding 4771 error with a failure code 0x18 that comes from the security log of the DC that states there was a Kerberos pre-authentication failure for the cluster network name object (Domain\Clustername$)
I believe this is what is causing the repair failure. All the information I found related to security error 4771 was either a bad credentials given for a user account or the fix was to reconnect the computer to the domain. I can't seem to find
a way to do this with the cluster network name. If there's a way please let me know.
I've tried a number of things, like resetting the object, disabling it, deleting and creating a new object with the same name, deleting that new object and recovering the original, etc...
Can anyone shed some light on what is going on and hopefully how to fix it other than rebuilding the cluster? I'm quite close to just tearing it down and building it back up but am hesitant because this cluster in currently in production...
Any help would be appreciated

Hi,
I don’t find out the similar issue with yours, base on my experience, the 4096 error
often caused by the CSV disk issue, and the 0x80005000 error some time caused by the repetitive computer object in OU. Please check the above related part or run the validate test then post the error information.
Although I do have a CSV, there doesn't seem to be any problems with it and it was running just fine for a month or so before the problem started. I double checked and there is no duplicate computer objects, maybe I don't understand what you mean by
repetitive, could you explain further?
The cluster validates successfully with a few warnings:
Validating cluster resource Name: DT-FileCluster.
This resource is marked with a state of 'Failed' instead of
'Online'. This failed state indicates that the resource had a problem either
coming online or had a failure while it was online. The event logs and cluster
logs may have information that is helpful in identifying the cause of the
failure.
- This is because the cluster name is in the failed state
Validating the service principal names for Name:
DT-FileCluster.
The network name Name: DT-FileCluster does not have a valid
value for the read-only property 'ObjectGUID'. To validate the service principal
name the read-only private property 'ObjectGuid' must have a valid value. To
correct this issue make sure that the network name has been brought online at
least once. If this does not correct this issue you will need to delete the
network name and re-create it.
- This is definitely related to the problem and the GUID probably got removed when we attempted a fix by resetting the object and trying the repair from the failover cluster manager.
The user running validate, does not have permissions to create
computer objects in the 'ad.unlv.edu' domain.
- This is correct, we run a restricted domain. I have a delegated OU that I can pre-provision accounts in. The account was pro-provisioned successfully and was at one point setup and working just fine.
There are no other errors nor warnings.

Powerbook G4 HD SMART Status: Failing

My powerbook G4 (1.5GHZ, 1GB RAM, OS 10.3.9)recently runs very slowly, sometimes freezed up during power off process. I checked the activity monitor to see none program hogging the cpu and memory, There are about 37GB free space on the hard drive. Checked the Disk Utility and saw the SMART status: Failing in red letters. Can anyone tell me if that is the sign the HD is going to die soon? If I used the install CDs to reinstall very thing, it will fix the problem or not? Or I just need a new HD? Luckly I was able to backup everything on my Mac to my desktop. Thx

Welcome to the Apple discussions.
That means that it's time to replace the hard drive, as it will fail shortly due to a hardware failure. If you want more detail on what is failing, install Smart Utility from Volitans.
New hard drives are cheap ... good source is Newegg.com, as they have many user reviews, good prices, good service. I've bought drives from them for years, and can recommend them. You'll want a parallel ATA interface 2.5" hard drive. Can't use a serial ATA (SATA) interface hard drive.

Could not send notification 65569 (status 'FAILED')

Customize Workflow runs with 2006 error - only happen in the morning
We have created a customize workflow which works a bit funny here:
When we first run the workflow in the morning, it ends up with this error:
Activity Buyer Notifications
Result Mail
Error Name WFMLRSND_FAILED
Error Message 2006: Could not send notification 65569 (status 'FAILED') to 'CONTRACT SERVICES'.
Error Stack WF_MAIL.GetDocContent(PO_DETAILS_BUYER)
Then, thinking of some problem might happend to the workflow mailer, we run the standard workflow, e.g. PO Approval. It runs successfully and send out the notification email. So, we then run the customise workflow again, and this time it works, no error has been generated as above.
The funny thing is, this had happened more than a week, where every morning I have to somehow run a standard workflow (normally I just create a new PO and send for approval), and got my customize workflow run successfully.
Can someone highlight what's going wrong here?
Is that some setup or soemthing that contribute to this problem?
Thanks,
Patricia

The notifications are defined in the workflow but they do use a document type attribute (we send a table of data "Job", "Job Name", "Amounts").
We have changed the database packages a lot and that created many problems afterwards so we minimized when we make those changes and we restart everything (database, IAS Server) afterwards.
Here is the email to SYSADMIN:
=========================================================
Subject: Error in Workflow DUNAPIN2/20060323123955x30741282 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
From
To SYSADMIN
Sent 03-APR-06
Due
Notification ID 41121
An Error occurred in the following Workflow.
Item Type = DUNAPIN2
Item Key = 20060323123955x30741282
User Key =20060323123955x30741282
Error Name = WFMLRSND_FAILED
Error Message = 2006: Could not send notification 41119 (status 'ERROR') to 'KKEMPER'.
Error Stack = &ERROR_STACK
Activity Id = 52557
Activity Label = GET_GENERAL_LEDGER_APPROVAL:NTF_V2_AR_DEPT_OFF_MGR
Result Code = #MAIL
Notification Id = 41119
Assigned User = KKEMPER
Workflow monitor
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure all response prompts include a desired response value within quotes.
How do you want to Continue?
How do you want to continue?: Abort Resolved Retry Request information
=========================================================
Any help would be greatly appreciated.
Jim

In Failover Cluster 2008 mailbox2 server network status Unavailable (down).

Hi
I am new here, & hope i can get some help for the below issue
let me keep it simple scenario
i have 2 mailbox server ( mbx01 & mbx02)
2 cashub Server ( cshb1-cshb2) all running on hyper-v. last week due to some maintenance in data center i have to bring down all the production environment, once the thing are fixed in DC , i started all the server and found out that my exchange node 2 database
are failed.
In exchange 2010 failover cluster node ( node2 ) is down network status unavailable. due to by exchange node2 database are failed.
also i cannot access the file share witness directory from any of the above server.
can any body assist me on this please
thank you

Make sure both the DAG members have access to the witness directory. Check the location and make sure you have access. Open the DAG properties from Node2 and try to update the witness server and witness directory. Check the firewall/antivirus of the witness
server. Try disabling antivirus and firewall. If witness server is not online your databases will go offline. Pleae check
this
Get-DatabaseAvailabilityGroup -Identity DAG -Status | fl name,servers,witnessserver,witnessdirectory,alternatewitnessserver,alternatewitnessdirectory,operationalservers,primaryactivemanager,witnessshareinuse
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

ADF Mobile - Get network status

OS: OSX 10.8.5
JDEV: 11.1.2.4
ADF Mobile Extension version: 11.1.2.4.39.64.51
HI All,
I'm currently in the middle of developing an ADF Mobile application and exploring the offline/online capabilities and have run into an issue where i'm trying to determine if the user has network connectivity, but its not working properly. I'm trying to make the app as dynamic as possible such that, for every transaction that requires network access, the app will check beforehand whether it is "connected" or "disconnected". I've tried the following but not quite got there..
1) From the link below, Joe does make note that the EL Expression "#{deviceScope.hardware.networkStatus}" to resolve the network status is only evaluated at start up, which is good for when the app opens.. but not good when the user loses network connectivity.
Re: JDeveloper ADF Mobile -- Android Context
2) The link below uses javascript to evaluate the network connectivity. This works first time and every subsequent time afterwards, however, I would like the javascript to ONLY evaluate the network status and then populate a pageFlowScope variable with true or false. This bit also works fine. From here, it may seem that the pageFlowScope variable has been populated, but if the java method (which calls the javascript function to check the network connectivity) also includes code that reference the pageFlowScope variable that the javascript has just populated, it is not evaluated properly.
Example:
    public void checkConnection(ActionEvent actionEvent) {
        // This works fine and populates the PageFlowScope variable fine
        AdfmfContainerUtilities.invokeContainerJavaScriptFunction("feature1", "application.checkConnection",
                                                                          new Object[] { });
        // The two lines below do not work properly, as if its retained the old value of the pageFlowScope.
        ValueExpression ve = AdfmfJavaUtilities.getValueExpression("#{pageFlowScope.isConnected}", String.class);
        throw new AdfException("isConnected: " + (String)ve.getValue(AdfmfJavaUtilities.getAdfELContext()), AdfException.INFO);
Unwinding ADF: Offline Data Synchronization for ADF Mobile
Below is a link to a sample app that i made and the steps to reproduce:
https://app.box.com/s/ng5n362unttu7b88i42b
- Have network connectivity
- Click on the "Check connection via JS' button the first time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is INCORRECT
- Click OK twice
- Click on the "Check connection via JS' button the second time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is CORRECT
- Click OK twice
- disconnect your computer from the network/internet
- Click on the "Check connection via JS' button the third time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is INCORRECT
Has anyone has similar use case has have a work around/solution? This is driving me nuts!
Cheers,
Eddie

Hi Frank,
Thanks for the quick reply.
That's exactly what i've used in my javascript function in my demo app and that link is the resource i used as well, however, that javascript code does populate the pageFlowScope variable fine, however, if i make reference to that pageFlowScope variable from within the same java method that includes the call to the javascript function, it does not get the updated pageFlowScope value. Only after the transaction has fully completed and i then [for example] click on a button on the screen to evaluate the pageFlowScope variable again, do i get the updated value.
Having a stab in the dark, could it be something to do with the way the javascript is executed when updating the pageFlowScope variable and lifecycle of that transaction
I've also tried this under the code where it populates the pageFlowScope, but it can't resolve the expression, seems like i'm doing something wrong..
navigator.notification.alert('pageFlowScope value: ' + adf.mf.el.getValue("#{pageFlowScope.isConnected}", onSuccess, onFail), alertDismissed, 'Connected', 'OK');

The vm and host networking components failed to negotiate protocol version '4.0'

Hi,
I have the problem that when I start a VM with windows server 2012 on a hyper-v v2 host, it takes very long till the VM get bind the static or dynamic ip adress. I tried both, static and dynamic. In every case I see at the event viewer the following error:
the vm and host networking components failed to negotiate protocol version '4.0'
After a few minutes the VM gets bind the IP an everything works fine. But at the next time I reboot the machine the same failure appear.
Trying to use legacy network adapter results in the same problem. After this I tried to export the vm to a hyper-v v3 host. At first boot time
the problem didn't appear and the vm get's bind the ip adress without problems. Then after upgrading the integration services to hyper-v v3
version the same problem appears but without register it in the event viewer.
Does anybody know how I can fix this problem?
Kind Regards,
Marcus

Hi,
A MS KB records an issue when you run Windows 8 or Windows Server 2012 based Virtual machine in Windows Server 2008 or in Windows Server 2008R2:
http://support.microsoft.com/kb/2744129
There is a Microsoft update in this KB, you may install this KB in your Windows Server 2008 R2 and check the result.
While about this issue after you migrate the guest VM to Windows Server 2012 host, will it still has such error message after you remove all network adapters of the guest VM?
Install Windows update for the Hyper-V host, after that upgrade Integration service for the guest VM again to check the result.
For more information please refer to following MS articles:
"Unsupported configuration" warning when you run a Windows 8-based or Windows Server 2012-based virtual machine in Windows Server 2008 R2
http://support.microsoft.com/kb/2737297
Hyper-V Overview
http://technet.microsoft.com/en-us/library/hh831531.aspx
Lawrence
TechNet Community Support

Network Status Page

Has EE have a network status page like most of the other networks, all i can find is http://downdetector.co.uk/problems/ee-everything-everywhere which tell's me how bad EE is, I'd have to agree.I've tried most networks this has to be the worst.Luckly i'd only bought a 90 day internet sim but 5 days with it still yet to view a webpage well except my add-on page after about 40 refresh's and about 30min's.At least i know when my contract run's out next month EE is one to avoid.

Adding to my previous posting ... http://ee.co.uk/content/dam/everything-everywhere/documents/Our%20Company%20responsibility/EE%20Responsibility%20Report%202013.pdfmakes interesting reading and promises on Page 14 that in 2014 there is planned "Launch of online ‘real-time’ network status
tool that allows customers to see if there’s a
temporary network fault or planned disruption
in their area, and the status of the issue"
Presumably (?) it is in testing now, so that it can go live in 2014. Certainly EE's MVNOs must know about it, so how about an update here?

Trying to connect, but network status says "Ethernet cable not plugged in"

I've got a G5, and I'm using a DSL modem (with 1 ethernet port) and a perfectly functional ethernet cable that is plugged in. Yet I can't connect to the internet, and according to the network status, the ethernet cable is not plugged in. Any help is appreciated.

I've got a G5, and I'm using a DSL modem (with 1
ethernet port) and a perfectly functional ethernet
cable that is plugged in. Yet I can't connect to the
internet, and according to the network status, the
ethernet cable is not plugged in. Any help is
appreciated.
There are only three things which could be wrong.
1 the cable is bad or not properly connected. (most probable)
2 the DSL device (what kind of DSL device, btw?) is bad or has a bad port or is not properly connected.
3 the Mac has a bad ethernet port, a bad ethernet controller chip, or is not properly connected.
I'd verify that the cable has a good connection, first thing. The best way is to unplug it (at both ends) and then plug it back in.
If no joy, I'd go over to a friend's place with Mac, cable, and DSL device.
I'd plug the Mac into the friend's local net, using the friend's cable; if that works, the problem isn't on the Mac. If it doesn't, I'd take the Mac over to a repair shop or would get a wireless card (if not installed already) and a wireless router and connect wirelessly. Be advised that the ethernet port on an iMac is built into the motherboard, and replacing/repairing that port will require a motherboard swap and will be expensive if you're not still under warranty or AppleCare.
If the Mac works with the friend's cable, replace that cable with yours. If it stops working, your cable is bad. Replace it. If it keeps working, your DSL device is bad. Replace it.

Network connection failed

It says network connection failed. Please check network connection & try again. I am connected to the network, but it won't let me use messaging or FaceTime

Hi Friend,
First, Where are you located and what country did you buy your phone? Some countries have restricted facetime, ie middle east, UAE.
Try to reset your network settings, double check the Restrictions settings, check the Safari settings...
If not, you have some problem with iinternet connection. Look at airplane mode is off, if your iPad recognizes WiFi connection or not, check the Restrictions settings, if other device also faces the same problem with internet connection
Check if you signed in Facetime with your Apple ID and password (Settings>>Facetime).
Check if you have signed iCloud in.
Check that FaceTime is not disabled in general/restrictions. If that isn't the problem try changing dns servers on your iPad.
Go to Contacts app and select the person you want call then tap Facetime.
Change your address for your currently location. If not works, change it for your native country or for United States (yes, some users have posted in foruns that after change the location to U.S. Everything works at a glance).
If not works, check if the person who you are trying to Facetime has signed in his/her Facetime too.
Most of times the Facetime calls work calling from your friend's email address instead of mobile number. So try to call your friend both ways (his/her mobile number and his/her email address).
If still not working:
1. Go to the Settings App.
2. Tap on Wi-Fi
3. Your chosen network will be ticked. Tap on its white arrow over a blue circle button to its right
4. Tap on DNS
5. Replace the current information with 8.8.8.8,8.8.4.4
6. Try visiting a website with Safari to see if this works
7. Try registering iMessage / FaceTime
If still not working, go to Settings -> General -> Date & Time -> Set Automatically: ON (Yes date time setting has been known to cause issue).
Hope it will be helpful

Addon Status Failed

I have created a small addon in SAP B1 2005 SP01 and register the addon using ard and exe and SAP run my addon and it work fine but in addon manager I get my addon status failed. I have also tried B1DE for creating addon installer but the error still persists.
Please help

Hi Parag,
Yes this is a problem, for sort out this problem, when you are creating installer for your addon you can open the CustomInstallerClass.vb under customerLibrary in your installer project.
and do this change
actual code:
#If Version = "2005" Then
      '' Call B1 EndInstallEx, succeeded true
      ret = EndInstallEx(targetDir, True)
            If (ret <> 0) Then
                MsgBox("Error at EndInstallEx(True) call at the end of the AddOn installation: " + targetDir)
            End If
#Else
      '' Call B1 EndInstall (no parameters)
      ret = EndInstall()
      If (ret <> 0) Then
        MsgBox("Error at EndInstallEx() call at the end of the AddOn installation")
      End If
#End If
change it to :
#If Version = "2005" Then
      '' Call B1 EndInstallEx, succeeded true
      ret = EndInstallEx(targetDir, True)
            If (ret <> -1) Then
                MsgBox("Error at EndInstallEx(True) call at the end of the AddOn installation: " + targetDir)
            End If
#Else
      '' Call B1 EndInstall (no parameters)
      ret = EndInstall()
      If (ret <> 0) Then
        MsgBox("Error at EndInstallEx() call at the end of the AddOn installation")
      End If
#End If
you have to compare ret to '-1' instead of '0'
after done that change again rebuild your solution, its working fine.

Everything under network status failed

Similar Messages

Maybe you are looking for