Everything works but itunes

quicktime works but will not prompt me to the itunes site. I had agreed to download the new version of itunes, but did not restart my comouter right away. bad idea!! i went to shut down my computer, and an end program message was prompted, and i ended the program and since then i haven't been able to load or repair the program. have i lost my library and the money on my account? please help this is very frustrating and has made me question the integrity of apple products.

Ahhhh ... an "itunes has encountered a problem" error message.
Okay, let's first check to see if this is associated with a problem with your QuickTime. (iTunes needs a properly functioning QuickTime in order to work correctly.)
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

Similar Messages

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

You would get better response from the iTunes community forum.
Have a nice day!

My ipod is displying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesnt "see" it even if the computer does.

"My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
Can I factory reset it somehow? (considering itunes can't "see" it)
[Ipod classic 160gb less than two years old.]

Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure.

I was on a trip and one of my hair products got on my ipod touch everything works but the front camera can i fix the front camera?

i was on a trip and one of my hair products got on my ipod touch everything works but the front camera can i fix the front camera?

Did the iPod get wet by the hair product and probably cause a problem due to the liquid or is there some thing on the front camera lens that prevents the camera from seeing? How does the camera not work?
If liquid damage I doubt YOU can fix it but you can have Apple fix it or a third-party place. If lens is obstructed you may be able to polish the area.
Apple prices:
Apple - Support - iPod - Repair pricing
Third party places:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
DigiExpress.us - The iPad Repair Professionals

I forgot my iPod at a bomb fire at school and it was on the field and water got on it everything works but you can tell that theirs water inside how much would it cost to replace the screen at apple

I forgot my iPod at a bomb fire at school and it was on the field and water got on it everything works but you can tell that theirs water inside how much would it cost to replace the screen at apple

Place the iPod in a sealed container with a desiccant for a week. Uncooked rice works. Change the desiccant every day or so for a week.
Do not charge or turn on the iPod until dry. Then try:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for
$199 for a 64 GB 4g
$99 for the other 4G iPod
$149 for 5G iPod.
They do not fix yours.
Apple - iPod Repair price

I dropped my iphone 4s in water and everything works but the backlight. I have heard rumors that I can take my damaged iPhone into an apple store and trade it in for a new phone and pay the difference. Is this true?

I dropped my iphone 4s in water and everything works but the backlight. I have heard rumors that I can take my damaged iPhone into an apple store and trade it in for a new phone and pay the difference. Is this true?

Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price.

I updated my ipod touch and now it won't work but itunes says everything is fine. What should I do?

I was updating my itouch that I got in September to the IOS 5 and everything went fine until the end of the update when it was creating a new back-up of the information on the itouch. When I saw that it didn't work and it told me to restore the previous bakc-up I tried that, but nothing happened. Itunes was doing a lot of work but my ipod touch didn't show that anything was happening. My ipod touch wants me to go back through the set up and when it gets to the part where you can restore a previous back-up I tell it to do that. The problem then is that it tells you to connect it to itunes and I do but the itouch doesn't seem to realize that it is plugged into itunes. Then I try to restore the old back-up form itunes and it immeadiately pops up saying htat it can't because of error: ipod (-50).

Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694

My Ipad 2 was working fine, after syncronizing with iTunes the contacts App froze completely, in the Settings everything works, but if you go to the mail settings they the settings freeze. I can't send Emails. I am using outlook, anybody has an answer?

My Ipad 2 was working fine, after syncronizing with iTunes the contacts App froze completely, in the Settings everything works fine but if you go to the mail settings the entitre settings freezes. I am usng Outlook but can't send mails. Any body has a solution?

Update to above question:
Hello All,
To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
So this fix worked for me.
After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
I hope this works for you on YOUR Apple devices.
Bob

Mac + PC sharing one library on NAS...everything, works, but...

Hello,
I've been running for quite a while with one shared itunes library on my NAS (.itl file and all) so everything is seamlessly shared by my PC laptops: playlists, cover art, music, etc. The one drawback is I can only run one instance of iTunes at a time, but that's never been an issue.
So, I added a Macbook to the mix (finally)! That too works fine with this scheme (command-click when starting iTunes and point to NAS library). The only drawback is that whenever I open the other platform from the one where I last made a change or added a song (PC to Mac or vice versa), it takes a good 5-10 minutes of processing, where iTunes show a progress bar saying "updating library". Not sure what it's doing...? Arent they reading from the same file? Are there settings I should be tweaking? Like, I never quite fully understood what it means that iTunes will keep your folders organized for you, though I keep it checked. Any suggestions are greatly appreciated. Again, it works, but it seems faster on startup when staying on the same platform!
Thanks!

One thing to remeber is that iTunes does not store the ratings with the songs. Ratings are stored on the individual machines accessing iTunes. Two machine, two different sets of ratings.
There is supposed to be a way to keep the library file on remote drive, even then only one iTunes will be able to use the library file at the same time. iTunes is not designed for multiple users at once except for using sharing.

My phone fell in water and I put it in rice and everything works but now I can't get the charger in the charging thing. Like it won't go in... What do I do?

I had my iPhone 5c in my pocket the other day and it fell in the toilet... I was mortified. I immediately grabbed it out and ran and got a bowl of rice and stuck it in. Siri was going crazy all night cause the home button wasn't working so I turned it off for the night. When I turned it on she was working perfectly! Until today when I tried to plug in the charger. The charger just will not go in! I don't know if rice got stuck in there or what but I do not know what to do! Please give me some suggestions guys!!! Also hopefully cheap cause I don't have the money to pay for a new one lols... Thank you

First of all, you are fortunate that everything works. Secondly, I agree that rice may be the culprit in the charging port. However there is a chance that your trying to fix it could actually harm the port and cost you, so I suggest you first get under a bright light and use a magnifying glass to see exactly what and where the obstruction is. Attempting to connect the charging cable has probably already forced the obstructing substance further down into the port. Obviously the port is small and will require some kind of tool to help you remove whatever is in there. I suggest a plastic toothpick that is not likely to break and shouldn't do damage to the contacts. Tweezers may be useful but if utilized be very cautious not to scrape anything if at all possible.

Download link didn't work but itunes still took money, what to do?

I pre ordered album from itunes with iPad and got that link where I can download it. That link didn't show up anywhere and this didn't load music to my iPad but still on my Apple ID they have took that money...What I do to get my album or money?

There are several photo apps but I've never used one so I really have no recommendation.
How many photos are you talking about? If it's a few you can e-mail them to yourself.
If you have the camera connection kit you can use it to transfer p hotos with a SD card. (USB flash drives might work but it usually takes trial and error to find one that doesn't trigger the 'device requires too much power' warning)
If you use the SD card you make a folder named DCIM on the card, then make sure all your images have names of exactly 8 characters, DSC_4757.jpg for example. And that all those images are inside the DCIM folder. You then connect the card, open the photos app and import the photos.
Alternatively you can use a service such as dropbox or other file transfer service to upload the photos them download them onto your iPad.

HT1338 everything works but continuous spinning wheel on iPhoto. how can i stop this or exit this screen?

How do I stop spinning wheel on iphoto. everything else works, but cant close iphoto file. help.

http://www.thexlab.com/faqs/sbbod.html

Sound not working, but itunes works

i dont know what happened. im assuming i pressed some configuration of keys and did something. itunes works, plays music, if you select a ringtone it works, but only for the preview and not when my phone is ringing. no other sound effects works. what gives? i turned it off and back on and nothing.

http://www.pinssible.com/blog/2013/07/padgram-has-no-sound-when-playing-instagra m-video/
I finally have sound thanks to this site!...
Essentially:
- double tap the home button
- swipe finger to the right & the orange music icon + play controls will appear at the bottom of the screen
- the sound icon will likely have a slash through it, indicating that the sound is muted --> tap the sound icon to remove this slash and turn the sound on
That's it!
*I also discovered that this set of controls provides quick access to altering screen brightness (located beside the sound icon), as opposed to adjusting it via settings (which is more time consuming)!!
Below are the directions provided on the site I referenced, which I paraphrased and provided additional details to above. Read these if you need further explanation:
"Open iPad “Settings” -> “General”, if “Use Side Switch to: ” is set to “Mute”, then make sure your iPad’s Side Switch is not turned on.
If “Use Side Switch to: ” is set to “Lock Rotation”, then double tap the “Home” button, swipe from left to right on the task bar, until reaching the first page. Make sure the “Sound” icon is not set to Mute."
I hope this solves your sound problem!

[SOLVED] K7N2 Delta2-LSR Everything works but OpenGL Apps.

Hello Folks.
Interesting problem I have never run into before. Recently upgraded to the K7N2 Delta2-LSR MB, and everything works great except for any opengl based application, which just crashes out. But first a list of the system specs, then a detailed explaination of everything I have done.
MB: K7N2 Delta2-LSR
BIOS: Award vB.6 (11.6)
CPU: AMD Athlon 1333Mhz (Don't know which core, sorry) 133MhzFSB x10
RAM: (2) 256M DDR266 (No brand name, Samsung memory chips)
(Dont have memory timings handy, but will get if needed. Using By SPD in bios)
Video: Chaintek GeForce 6600GT (nvidia gefore 6600gt chipset)
PSU: Logisys Computer PS 550A-BK 550w (+3.3v/30A +5v/38A +12v/25A)
HDD: IBM 20GB IDE (Can get full on model if needed)
Audio: Sound Blaster Audigy2 ZS Platiumn (removed during testing)
OS: Windows 2000 SP4 (Fresh Install, latest MSI MB drivers from support site)
Okay i think that is all the relavent system specs, if anyone needs more I will be happy to provide.
Software used to test:
Direct3D: Rose Online (game), dxdiag 3D tests
OpenGL: Doom3 (game), Luna (nVidia Demo), Nalu (nVidia Demo), Dusk (nVidia Demo), Windows OpenGL screen savers
The Issue: OpenGL application crash during startup, normally in the nvoglnt.dll file. System completely stable otherwise. Windows 2D applications work fine. Direct3D applications work fine. I am using the latest stable nvidia drivers 84.21. I have also tested with the following previous driver versions 81.85, 81.95, 81.98 and with the beta drivers 84.25, 84.43, 91.28, 91.31. During this test I also used a MSI 6600GT card from a known good working system. Putting the Chaintek in the working system, verified the card was good. It worked no problem. Putting the known good MSI card in place of the Chaintek in non-working system, OpenGL applications still crash. I believe at this point I have ruled out both video card and drivers as a culprit. I have a clean install of Win2K SP4 on the machine with latest MSI MB drivers. I have also tested with a clean install of WinXP upgraded to SP2, with latest MSI MB drivers, Same Result. The ram I have tryed in both Single and Dual channel modes. I have removed one stick and ran the system with just 256MB ram. I also swapped that stick with the other one per chance it was one of the ram sticks. Though they had been running fine previously for years in the system without incident until the MB upgrade. Also if I had bad ram I would expect to have general system instability across the board, not just opengl apps. As a last resort I hung the HDD off my known good working system, even though it has an ASUS nForce2 chipset MB. When it booted up, All applications ran fine. DIrect3d and OpenGL. At this point in the game I feel I have ruled out software and video drivers as the culprit.
I've never really run into a problem like this before and am beginning to suspect that something is wrong with the motherboard itself. I just wanted to bounce this issue off the brainpower here at the forums, before I contact the place I bought it from for an RMA.
So I guess this all boils down to is, has anyone else ever had this issue and resolved it? Or, does anyone have any other troubleshooting ideas I can try? Thank you for all your time and consideration in this matter.
Kershoc

Quote from: Richard on 09-June-06, 09:35:53
BOSSKILLER,
I agree but first we need to get APIC enabled with a Fresh Install of WinXP.
Richard
yes APIC must be enabled and OS installed after it. my reply was add-on after yours.
Quote from: Kershoc on 09-June-06, 09:36:23
Richard,
The install is already on its way. The XP install has an option for a quick format, so it's not as long as if I did a full one (thank goodness). I've got a copy of memtest86 on one of my diag cd's around here. I'll go ahead and let that run overnight when I go to bed.
Bosskiller,
It is BIOS version B6 aka 11.6. It came on the board by default. I dont recall seeing an Nvidia/ATI speedup option, but it may be one of those hidden ones you have to press a series of hotkeys to see, so I will check. I will let you know more, once this reinstall is completed.
yes Nvidia/ATI speedup option is hidden("SHIFT+F2","ALT+F3")
"I'll go ahead and let that run overnight when I go to bed."
hmm not good idea, couse that will take alot of time which is no need really, make 20 passes on Test Number 5 only in memtest, then leave SP2004 or Prime95 (Large'FFTs in Blends).
But at all think there is not instability issues or you may have it but that is not couse the your problem. becouse instability is random, you are already running Direct3D base application and problems must exist there also if you have big instability, but that is not happend. if stress tests detected instability issues than will mean that you have more than one problem.

HP 2140 fax - everything working but printed page is blank

Printing a page seems to be working but nothing prints on the paper. Installed a new black cartridge but still nothing printing on the page. Unplugged the fax and waited 10 seconds to reset it and still does not print. I only use it maybe once or twice a month.
Any help please

Hi @dasteele,
Welcome to the HP Forums!
I noticed that you cannot print wirelessly with your HP Envy 5530 on Windows 8, that was previously working. I am sorry to hear this, but I am happy to help!
Please see the following guides:
'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8.
Printer Does Not Maintain Wireless Connection.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Everything works but itunes

Similar Messages

Maybe you are looking for