EWA Report error
Hi,
i am running t code SMT2
i got the below error.
RC=0No authorization to logon as trusted system (Trusted RC=0).
Kindly advice this error
Regards,
kalees
Edited by: kalees waran on Apr 7, 2011 11:55 AM
Hi,
The RFC that the destination uses is likely to try and use your current user id. If this is the case, make sure that you have the S_RFCACL authorization object defined on your user.
This link should help to explain things further:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm
Matt
Similar Messages
-
Getting a error when clicked on the EWA report
Hi All,
I am getting the below error when i click on the EWA report.
Error: &EA1000000002570&: Attribute not found: &TEXTPARAM& &check_244_comment&, Program SAPLDSVAS_PROC, Include LDSVAS_PROCERI, Row 48hi
pls refer the thread
[Ealry watch alert report is not displayed in solution_manager|Ealry watch alert report is not displayed in solution_manager]
and
[Re: EWA report is not displayed in solution_manager|Re: EWA report is not displayed in solution_manager]
jansi -
Short dump when running EWA report
Dear Expert,
I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_GUI_GP=====================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Missing RAISING Clause in Interface
Program CL_GUI_GP=====================CP
Include CL_GUI_GP=====================CM017
Row 1
Module type (METHOD)
Module Name IF_GRAPHIC_PROXY~EXPORT
Trigger Location of Exception
Program CL_GUI_GP=====================CP
Include CL_GUI_GP=====================CM017
Row 19
Module type (METHOD)
Module Name IF_GRAPHIC_PROXY~EXPORT
Please advise asap since we need the report immediately.
Thank you in advance,
RudiHi,
[This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
feel free to revert back.
--Ragu -
EWA reports not generated from Solman
Hi All,
EWA reports are not been generated from Solution manager system.
Earlier they were working fine. But now it is not. We need to troubleshoot it.
Kindly suggest some healthy steps so that this could be started again.
Regards,
Sujit TakaleHi man you dont gave to us a lot of informations, they are tons of reasons ... If RFC connection are generated correctly, make sure your followed the tree setps using the transaction ags_update.
Just double check that to see and provide to us more informations like error logs or something else
regards -
Configuration of EWA reports for java systems.
Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks -
Hi All,
I use SAP 4.7 enterprise x200
i have configured the EWA reports through my solution manger (kernel 700)
in the EWA report we encounter certain issues.
in System Config -> S/W Config -> SAP Kernel release (3.2.2)
i have kept all my systems in the same kernel level but it is showing the error that we are running different kernel releases.
in DB Administration -> Tables not used (10.0.5)
it shows that there are two tables that i have not used. but when i checked it data was there (but as explained it was data from DB13). so if i delete the tables what will happen to the DB13 entries. will further scheduled jobs work.
Thanks in AdvanceHi Eileen,
I have looked into this before as well, as I wanted to schedule EWA's MORE frequently as we came closer to a Go Live date. I was informed that it was not possible to change the frequency of days other than to manually create more EWA's myself.
My suggestion would be to maybe create a job/reminder for your Operations staff to push the EWA dates out 4 weeks manually after they have been created. (I know this isn't optimal).
But then at least you are seeing a report spanning a 4 week time period.
Also, I have changed the EWA day from Monday before without any conflicts. I just keep all the systems on one consistent day across the board, and my EWA for Solutions is the day after. IE: EWA's are on Tuesday, EWA for Solutions is on Wednesday.
Hope this helps. -
Dear Forum,
I had a problem with the EWA reports on our Solman from the satellite systems. It got a syntax error, since solman tried to execute the session that was obsolette. Then I got a solution by refreshing service definision as in the note 727998. For the first trials I did it on one of the satellite systems and the solman. It worked and I was able to get the old EWA that failed before.
Now there are still some old EWA on the satellite systems that were not sent to solman, yet. I have tried to send them by executing send session data in SDCCN, but nothing came to solman. It is a solman 3.2. The weekly EWA works fine, the sessions are ready on the satellite systems.
So, my question is how to get the old EWA reports that generated by the old session?
Regards
AgoesHi Mathias,
Thanks for your reply.
Andy Lam from OSS helped me with this solution:
==========================
05.07.2007 - 03:35:19 CET SAP Reply
Hello Agoes,
Move your mouse pointer to the grey diamond icon and there will be a
popup of the session no.
Copy it down and goto txn DSA -> Selected Session -> put in the session
no. -> enter
Double click on the session number and on the left panel, right click
on the "EarlyWatch Alert" -> Session Components -> Reset.
Then double click on "EarlyWatch Alert" -> EN language
Then the system to try to regenerate the report again.
If this still comes out with the Grey Diamond status, please kindly
revert this message back to me and I will have my SV-SMG-SDD colleague
to look into it.
Thanks & Best Regards
Andy Lam
Active Global Support - SolMan & Technology (APA Timezone UTC+8)
==========================
After this process, I need to send them manually to the people that should receive the EWA reports.
Many thanks to Andy.
Regards,
Agoes -
EWA Report in incorrect format
Hi,
I am on Solman EHP1 SPS22. I am recieving EWA reports for my SLD System Netweaver 7.1 and Adobe Document services system.
The report format is in the ( ABAP + JAVA ) style , while both the systems are onlly J2EE servers.
Although there is no data displayed under the ABAP headings ( it shows 0 values for all monitors ) the J2EE config Data and JAVA monitoring parameters are showing correct values.
SMD is configured for the systems but ADS is not supported so cannot verify if there is any RCA Workload data being displayed under the RCA, although there are no failing dispatcher jobs.
Other systems ( J2EE systems in the landscape show only two Area under EWA as per new format for KITLRD2 Java VM Memory Performance & Java VM Activity Reporting) while for the Netweaver 7.1 and CE systems its still displaying all the areas including ABAP like Service preparation check and Workload for transactions, but its blank.
Any idea on how to get the format of the EWA correct.Dear
This [SAP Note 1010428 - End-to-End Diagnostics |https://service.sap.com/sap/support/notes/1010428] gives the overview of what is supported diagnostics wise for which SAP Solution Manager version.
The [SAP Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP25 |https://service.sap.com/sap/support/notes/1274287] has an overview of which notes have to be applied on managed SAP systems to avoid bugs/issues.
I'm having issues with getting diagnostics to work for PI Netweaver 7.1 but it looks like it's caused by incorrect entries in SMSY.
Another possible issue you can have after updating ST-PI:
[Note 1293644 - Error when running non-ABAP EWA after updating ST-PI|https://service.sap.com/sap/support/notes/1293644]
Information on missing data in service sessions from BI/CCDB
[Note 1332428 - Missing data in service sessions from BI/CCDB|https://service.sap.com/sap/support/notes/1332428]
KInd regards
Tom -
Hi,
ewa report showing Errors in Data Collection
The following exceptions were raised during data collection:
Host Function Name Exception
sapbwpapp GET_FSYS_SINGLE SHARED_MEMORY_NOT_AV
sapbwpapp GET_MEM_ALL SHARED_MEMORY_NOT_AV
sapbwpapp GET_CPU_ALL SHARED_MEMORY_NOT_AV
sapbwpapp FILL_SNAPSHOT_DATA SHARED_MEMORY_NOT_AV
plz kindly help me to resolve this error.
kvlHi,
Please Check the EWA Session Log which is run in sapbwpapp system using SDCCN. Any errors/warnings are listed there as mentioned in EWA Report ?
The EWA Session Data is collected at Satelite system and then they are transferred to Solution Manager System and/or to SAP for EWA Report generation.
Execute RTCCTOOL in both Solution Manager System and in Satellite system to get more information about the possible gapes (such as required Add/on, SAP notes implementation ) to have better service preparation. If required, Apply the recommended SAP Notes or Support Patches in both Solman and Satellite System as suggested Service Preparation Check (RTCCTOOL).
Also, verify the last EWA reports to check weather the same errors are reported earlier or not.
Regards,
Bhavik G. Shroff -
Hi,
I want to generate EWA Report of my Enterprise Protal server in my Solution Manager server.
Fot that I had install SMD in my Solman server and SMD & wily Introscope in my Enterprise Portal server.
Now can you please guide me which next steps is require so that I can genetate EWA report in solman?
Regards,
NisitOnce you have installed the agents on the satellite system and performed the other steps pertaining to the agent, you need to define the EP system in Solution Manager in SMSY with all the necessary details.
If the system information is already updated through SLD, verify whether the information maintained is correct and up to date.
Then execute the SOLMAN_SETUP steps.
Ensure that the SMSY details are correct as it plays an important role pertaining to the system information and the further setup of Diagnostics/Wily.
Verify whether the EP system has appeared in your Solution Manager Workcenter SID list.
Execute the setup wizard for managed systems, ensure that the setup is complete without any errors. If any errors, resolve them and ensure that the setup results are Green.
Execute the IS Agent setup for the satellite SID.
EWA reports will be successfully scheduled once all these steps are executed successfully and when the EP system is added in a Solution.
Hope this helps. -
Hi All,
As per EWA report we have upgraed our oracle version 11.2.0.2 to the latest oracle SBP and has done all the steps as given in the readme document which is from market place.
After that we have generated the EWA report but still for the database performance point it gives below recommendation.
But still, in the EWA report we are getting below recommendation.
13.4 Oracle Release
Release Recommendation
11.2.0 We recommend that you install the latest Oracle patch set as
soon as possible (refer to SAP Note 415900). Check SAP Note 1431799
regularly for the latest patch set for Oracle 11.2.0.
Note that in addition to the patch set, further bug fixes may be
available and recommended. Refer to the following SAP Notes:
Patch set SAP Note number Description
11.2.0.2 1503709 Oracle 11.2.0: Patches / Patch collections for
11.2.0.2
Our concern is why after applying the latest SBP on oracle 11.2.0.2 still we are receving the same message.
It this only for information?
Can somebody help to understand.
Regards
DeepakHello,
If you are back on ST-SER 701_2010_1 SP05, you need to ensure that the Service Content is up todate.
Check in AGS_UPDATE. If there are any updates to be downloaded or Activated, please do so.
BEfore you replace the sevice defintions, check if there have bene any issues witht he refresh defintion task...you can see this int he maintenace package SDCCN task on the managed system. If it is not encountering errors and is running, then the system should have good curent defintions. But if there have been problems with the tasks at all it may be worthwhile.
Regards,
Paul -
SYNTAX_ERROR when generating EWA report
Dear Expert,
I have problem with solman system when generating EWA report, the error occurred after upgrading SP, the current status is SAPKB70013, SAPKA70013, SAPKW70015, SAPKNA7011, SAPKITLQI4, 700_2007_1 0000. We cannot continue to SAPKB70014 since the kernel level is too low.
The error is:
SYNTAX_ERROR
Short text
Syntax error in program "RDSVASAHW_CAPACITY_________013 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAHW_CAPACITY_________013
" in include "RDSVASAHW_CAPACITY_________013 " in
line 5730:
"The field "ET_OSCOLLINFO000099" is unknown, but there is a field with "
"the similar name "ET_OSCOLLINFO000098". "ET_OSCOLLINFO000098"."
Error analysis
The following syntax error was found in the program
RDSVASAHW_CAPACITY_________013 :
"The field "ET_OSCOLLINFO000099" is unknown, but there is a field with "
"the similar name "ET_OSCOLLINFO000098". "ET_OSCOLLINFO000098"."
Please assist me to fix the problem since the report is urgently required by our Management.
Thanks in advance.
Warm Regards,
RudiHi Rudi,
I've deleted and replaced the service definitions many times without problems. Essentially it's just deleting lots of table entries and replacing them again. It's not changing coding or reports. I'm not aware that the service definitions are deleted and replaced by any support package. You might consider updating to SP 8 for ST-PI 2005_1, since the mechnism for deleting and replacing the service definitions is made easier as of that support package. (It can then be done from within SDCCN.)
best regards,
-David. -
Hardware Capacity Alert in EWA report
Hi Expert,
We are getting below error message in our portal EWA report. Besides this, We have increase our memory RAM from 16GB to 32GB but still getting the error.
"Hardware resources may have been exhausted with the risk of performance degradation."Hi Raymond,
Pls refer below notes
SAP Note 1611483 SolutionManager7.1 - Outside Discovery common error messages
SAP Note 1400891 OSCommand CPU stat fails and missing Wily Host metrics
SAP Note 1309499 Hardware Capacity Analysis in SAP Services
Regards
K.N -
EWA Report Issue: No complete data is populated in EWA report
Hi All,
I am facing a problem where in, the generated EWA report for our XI system is not poplated with the complete data. This problem is there from past 2 months and before that this EWA report for XI system was duly generated with full and correct data.
There has been no changes in the recent time and all of a sudden this problem erupt. May any one help me in diagnosing this problem and solving it? Help is greatly appreciated.
Should there be any queries, please do ask me.
Waiting for your kind replies.
Regards,
FaisalHi Faisal,
Last time I asked you if the Red flag was gone.
You are saying the ABAP data is missing.
This would mean there is a Rated EWA report missing the ABAP instance data.
Does this mean it is a dual stack and the Java data is present.
EWA is a pretty straight forward process, so if you follwo the process, you can usually narrow down where the problem has occurred.
If ABAP data is missing in a generated EWA report, the first place to look for that missing data is in the service session.
You can view the service session by clicking the eye glasses under tha activity column in DSWP, or entering the session number in transaction DSA. If the data is mssing, then it never got to solution manger from the managed system, so you would then check the RFC functions and the RFC user has a valid logon, THere would be no point checking SM:EXEC:SERRVICES, or authorizations if the data is not int he service session.
If the data is in the service session and is missing, then it would be in the processing of the session into a Word ot HTML document, not the processing of the service session, because it would be processed and rated already by SM:EXEC SERVICES..
I had explained that you create an EWA and it is scheduled in DSWP > Solution Monitoring > Earlywatch Alert
it creates a service session, with a number and a tree. This is determined by the defintions in SMSY and the mapping to the DMD. It is scheduled for a date and time. On the managed system via RFC throught the maintenance package task in SDCCN or perhaps a scheduled refresh session taask, runs and via RFC to SOlman, logs on with the RFC use (SM*_BACK) and gets the
session numbers of unprocessed servies sessions for that SID. If it can't open the service session, it will just find not sessions to refresh. If it can, then an EWA task is created that will prepare a transport with the collected data. So if the collectors have issues, data won't be available. ST-A/PI and ST-PI are involved on colelction of data and preparation for transport on managed systems. But there is also SAPOSCOL and ST03 and ST06 that need to be checked. The SDCCN EWA task log. Then it sends the data back to Solman via the RFC and either the single Flask or the red flag will then turn to 2 flasks indicating the data is ready to be processed by SM:EXEC SERVICES. SM:EXEC SERVICES processes the session, populates it, and rates it.
Then you can look at the session in DSA o DSWP, you can geerate the report in Word or HTML.
So this is the process.flow overview. And it helps to know where it gets to in the flow to determine where something went missing or if it was ever there at all.SM:EXEC SERVICES doesn't colelc the data. So if it processes a service session the user had the authorizations. If the data is not int he service session its because it was never passed to Solution manage.
Iif the data is in thd service session, but missing from the report, then the issue is likely with ST-SER, or perhaps SCU.update has not been applied.
I suspect that the data is not in the service session and you are still having issues. Is the EWA still red flagged? Yes or No?
If yes, then you still have an issue where no ABAP data was sent via SDCCN to Solman. If no, then likely there is an issue with
collection, where data is being sent, but some data is missing, and this could be due to errors that have not been addressed in the SDCCN task logs. Or it could be problems wit SDCCN service definitions, and may need to be replaced.
I hope tis helps.
Regards,
Paul -
EWA Report Issue: Email notification problem
Hi,
I am running into a problem while sending EWA notifications to the concerned members. I have defined the needed user ids in table "DSWP_SYS_EMAIL" and all the members are duly getting all the EWA alerts defined against respective systems except one user. I have checked in SOST, this user name is not displayed every monday when these EWA reports are sent. I am not sure where else I have to look for solving this error. May any one please help and guide me in this?
Regards,
FaisalHi Tim,
Thanks for your reply. I had updated the respective user id in the above way mentioned by you last week and it seems now the user has received it (checked in SOST and user was sent EWA report).
However, if the BADI is acitivated (as we are specifying the user ides for each system) why I need to mention this user in separately? I believe, any one of them will be active...Am I correct in this/
PLease clarify.
Regards,
FAisal
Maybe you are looking for
-
How do I add a drop down Shadow with Photoshop Elements 12
I am having the greatest dificulty adding a shadow eccect to my photo, the tutorial is nothing like the software I am using, I have made the layers the back ground then croped my immage made i wanted to place on the background but when I try and use
-
WebGallerie in iPhoto'08 is disappearing
I'm having some problems with publishing my webgalerries in iPhoto 08. My photos still are in my webgallerie and on the net and on my iDisk folder within .Mac *but all the galleries are disappearing from my source-list within iPhoto'08.* So I cannot
-
TV@nywhere and closed captioning?
Is it possible to get closed captioning through S-video? It's been a while since i used this tuner. I used it for a while till i installed an ATI all-in-wonder. Now i am back with a different video card and back to the TV@nywhere. I remember being a
-
TOR and Availability Check,
Dear Friends, I have two questions: 1.What should be the Ideal requirement to be used ...is this 011-Delivery requirement 041-Order/delivery requirement 2.The MRP type i am using is Manual reorder point(V1). During "Determination Of Requireme
-
Secure Store lib Dir does not exist
My system: Enterprise Portal 6.0 in Windows 2003 R2 in SCS-instance in MSCS Cluster Having moved all ressources to node 2 I can no longer start my appl.server on node 1, since it searches for the Secure Store on P:, which is only available on node 2.