EWM  inbound delivery

Hi all,
We are trying to reproduce an inbound delivery flow from R/3 (ECC 6.0) to EWM ( SCM release 5.1).
We created an Integration Model, and it runs in the correct way, because Product, Location and BP Data were created correctly in SCM.
Now, when we create an inbound delivery in R/3 with a Packaging material, in SCM an Inbound Delivery Notification is created, but the system does not create
in automatic way the linked Inbound Delivery in SCM, as the Sap library shows.
Running SLG1 transaction one of the error messages shown is: "HU number XXXXXXX is internal and cannot be assigned externally"
Can someone help us?
Thanks in advance
Regards,
Rossella.

Hi Antonella
Looks like the PPF actions which create the INB dely are giving an error since the HU settings are not complete. Make sure that the packing material in EWM (which is CIF from ERP and WH Product has been creared) has a valid HU type entered. Also ensure that the HU number range in EWM (external number range) is in sync with the internal number range if HUs created in ERP.
Hope this helps
Thanks
Deepak Joshi

Similar Messages

  • EWM - Inbound Delivery Notifi. - Error on Activation

    Hi,
    I have configured ECC 6.0 with EWM 5.1. I have created a delivery and distributed to SCM 5.1.
    When I try to activate the inactive version in EWM, it gives me the following error
    Field Item: Person Entitled to Dispose is a required field for the action HDR: Activate Document
    Field Item: Stock Type is a required field for the action HDR: Activate Document
    Field Item: Owner is a required field for the action HDR: Activate Document
    Am I missing any configuration?.
    Please let me know.
    Thanks & Regards,
    Sat

    Hi Sathese,
    could you please be so kind and let me know what your SCU was missing?
    I'm facing the same error in EWM.
    Thanks a lot in advance and regards,
    Martin

  • HU GR Message Inbound Delivery EWM

    Hi Experts,
    If in EWM inbound delivery I have created multiple HU's and warehouse task for each HU for putaway.
    While confirming using RF-Putaway by HU option, one GR message is getting posted for 1 HU.
    Can you please suggest, is there any way to control this. We would like to see the single GR message when putaway WT's are confirmed for all handling units.
    Thanks in advance.
    Sandip

    In in the Interfaces, in Inbound Delivery, there will be an option. Send entire Goods Receipt at end of Inbound Delivery. Can you try changing that.
    Try using Option 1 in below screen.
    Regards,
    Sathish

  • Inbound Delivery Modification n follow on activities

    Hi,
    Is there a way to modify EWM Inbound delivery once it is locked for processing. For e.g. I received an Inb del in EWM, due to me not specifying the storage bin for the warehouse task, I specified the bin in customizing. Now, I get the same error message that storage bin is not able to be determined. Do I've to resend the inbound delivery from ECC to EWM again after rejecting this. How does the process work?

    Look at the Confirmations configuration on service POs. As far as my understanding the two processes are not either or it is the sequence. The inbound delivery is an indication that Goods receipt or Service execution is impending. Once goods are received or service executed, it is confirmed in the system and that triggers the posting of GR

  • Inbound delivery for Production Order in EWM

    Hi
    We have a scenario of creating Inbound Delivery, Pack (HU), GR and Putaway via an interface in EWM from an external system. Basically the transaction of /scwm/grpi and /scwm/prdi. I found this below thread which is little old. Could you please confirm if this is the only process or is there a better solution.
    http://scn.sap.com/thread/1557452
    Any useful information would help.
    Thanks, Raj

    Hi
    There is no straight FM or BAPI to do this. Have to go by the classes and methods the standard uses to create inbound delivery. It is based on BOPF framework. See the below note for a sample program that uses the same time of coding for outbound delivery.
    1414179 - Technical documents for software development in EWM
    FYI, the /SCWM/INB_DLV_SAVEREPLICA, cannot be used as this is for process if deliveries gets created in ECC first and  then EWM. Production receipt is the other way.
    hope this helps.
    Thanks, Raj

  • Creation of Inbound delivery in EWM

    Hi All,
    I am trying to find out  a way to create inbound delivery technically through a custom program.Can anybody suggest me is there any FM/BAPI or any other method to create an Inbound delivery in EWM exists?
    BR,
    Anil

    The actual scenarois is this:
    I am getting AUFNR(prodcutoin order),LGNUM(whs number) ....etc from XI system. I hav to use this data and have to create an Inbound delivery from expected GR in EWM and POST GR in EWM and Creation of Whs task in EWM again.
    The transaction to create the inbound delivery from expected GR is /SCWM/GRPI (GR Preparation: From Production).
    we do not have any BAPI or FM in EWM to acheive this. Pleas help me in resolving the issue.

  • Inbound Delivery Notification Document is missing EWM

    Dear Experts,
          Inbound Delivery document is created successfully in ECC, Prior to that PO is created in ECC which is replicated in SCM due to active integration model, based on the PO inbound delivery document is created, but it is not replicated automatically in SCM, I am not able to figure what is missing, is there any special customization is needed to send delivery document to EWM, Give your valuable suggestions.
    Thanks and Regards,
    Babu

    Hi Babu,
    1) Check whether the data is getting struck in inbound/outbound queues
    2) Check is there any inconsistencies
    3) Check is there active integration model for delivery documents
    Regards
    R. Senthil Mareeswaran.

  • Inbound delivery creation in WM - mapping to process type 1011 in EWM

    Hi All,
    I am new to EWM and have to configure handling units for picking and putaway in EWM.
    I am creating an inbound delivery w.r.t Purchase order in WM and passing it to EWM.  During the warehouse order creation I am packing the materials in a packing material. however, the warehouse process type is 1010 and I want it to relflect 1011.
    So I wanted to know how to configure the system either on the WM or the EWM side so that when the inbound delivery is received on the EWM side it maps it to process 1011.
    Arup

    Hi,
    To put across my question more clearly here is where I am right now. I pass the delivery to the EWM side. There I pack the materials. There is a HU association with the packing material.
    When I go to the screen with the follow on functions- warehouse task. Then when I choose the handling unit tab and click on the exectute button associated with the Whouse Req then there should be a Line item displaying the handling unit that was created in the previous step.
    However this is not happening and when I click on the execute button the line item does not show up.
    So I was wondering if there is some configuration that needs to be done to get the HU displayed?
    Arup

  • Create inbound delivery in EWM (Custom)

    Hi,
    I would like to create an inboud delivery in EWM through a custom program.
    Are there any function modules or class methods that can  simulate the standard transaction /SCWM/GR?
    Thank you.

    Hello,
    Yes, Please navigate and find through SPPFCADM. You can find some Methods, which can help the above functionality under Inbound Delivery.
    Regards,
    Sathish

  • Unknown error during manual creation Inbound Delivery in EWM

    Hello all,
    I'm building a demo for an SAP EWM system. It's installed on an existing SCM system, and is connected to ECC 6.0.
    The replication of Inbound Deliveries from ERP to EWM is going fine. However, when I try to create an Inbound Delivery in EWM manually (tr. /SCWM/PRDI), I get the following error message:
    Unknown error has occurred in target system - Message no. /SCWM/DELIVERY_UI056
    Does anyone know how to solve this error?
    Thanks in advance, best regards,
    Oliver

    Hello Fransesco,
    I've checked the settings you mentioned, but all seems fine.
    The correct Business system and SAP Release have been entered, and in the Inbound Delivery settings I can see that it is allowed to create Inbound deliveries in EWM.
    Any other suggestions?
    Thanks & regards,
    Oliver

  • Error in inbound delivery replication ERP - EWM

    Hi,
    We have recently installed SAP ERP 6 EhP 6 and EWM 7.0 Ehp2 Add-On
    Now, we are not being able to replicate Inbound Delivery from ERP to EWM.
    As we save the ID in ERP we are getting a message that the ID has been distributed.
    But the document is getting stuck in the RFC queue.
    In SMQ2 the particular queue gets the status "SYSFAIL" with the error message "Function module does not exist or EXCEPTION raised. Message no. SY359"
    The function module field contains "/SCWM/INB_DLV_SAVEREPLICA" 
    The status message says: "CREATE DATA: The document /1DF/_PDI000 is no... "
    I've properly defined the standard BAPI destination and I've checked note 1398474.
    Please help me get out of this mess.
    Regards,
    Oritra

    Hi Oritra
    As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
    Also try to create new delivery in ECC and send... As you was checking in SMQ2 it means
    "The status message says: "CREATE DATA: The document /1DF/_PDI000 is no..." it means after sending your delivery from ECC it is coming to back to the system where you are checking inbound queue and trying to create delivery.
    That time it find NO range for delivery , so see  number range assignment or number range maintenance and refusing to create delivery.
    so update Number range and assignment properly for ID in EWM system and check new flow.
    if resolved dont see below points.
    please provide more infrmation of below error from SLG1. keep some extra selection time zone.
    1. Do you have same or different client. As per above your description my understanding was same client (ECC and EWM).
    If you have different client then your ECC WM parameter under EWM interface makes ur delivery move to EWM system with distribution model created with BAPI replica.
    As I do not have ur system my second option will be try to check above setting and if not try to push in debug mode to see proper code.
    As per my knowledge I haven't see this issue and table you are asking are not found as requirement in system without which delivery is able to replicate in EWM.
    Regards
    Suraj

  • EWM - Unable to convert inbound delivery to goods receipt- status 'locked'

    Hello EWM gurus,
    We have configured ECC 6.0 with EWM 5.1. We created a delivery and distributed it to SCM 5.1.
    We are able to convert the delivery notification to inbound delivery. However when we try to convert the inbound delivery to goods receipt we receive the following error message
    "Delivery xxx has status locked( not possible to post)" Message no. /SCWM/GOODS_MOVEMENT026
    Could you please let us know how to resolve this issue
    Thank you,
    Ganesh

    Hello Amit,
    Many thanks for your response. I was able to overcome the above issue after I realized I needed to setup the staging area. Now I have run into a new issue. Below is the error message that I am now receiving. WHSE is the warehouse setup in SCM and so is 300015 which is the party entitled to dispose and F1 is the stock type ( unrestricted putaway). All these are in SCM. Not sure where this is to be mapped in ERP
    Regards
    Ganesh
    Could not determine ERP stock data for: WHSE 0000300015 F1
    Message no. /SCWM/ERPINTEGRATION105
    Diagnosis
    The transaction you executed causes a stock posting in the ERP system. For this, the system must determine the stock data for the ERP system (such as material, plant, storage location) from the EWM data (such as material, party entitled to dispose, stock type).
    For the following field, the system could not determine any ERP data: WHSE 0000300015 F1

  • Inbound delivery got stuck in EWM Queue

    Hi,
    I have an Inbound delivery got stuck in the inbound queue, which is from EMW. The error which it failed is "Enter SLED", but the point is material is serial number managed and not batch managed. I have compared with the successful serial number and could not find any relevant field.
    Can any one please let me know, why SAP is asking for SLED.
    regards
    Chaitanya      

    hi chaitanya,
    Have you checked the slg1 log? might have activated something related to quality.
    cheers,
    jobi

  • PPF: automatically Putaway WT creation after distribution of the inbound delivery from ERP

    Dear Experts,
    I'm trying to test the PPF in order to create a putaway WT for an inbound delivery in EWM-System directly after its distribution from the ERP-System.
    1. I’ve chosen the action profile (PDI_01) and did an assignment to the doc type PDI
    2. I’ve created the determination procedure to the action profile:
    3. I’ve created a condition records:
    After this I try to disribute an inbound delivery from ERP to EWM, but as after distribution as after saving of the inboun delivery nothing happens.
    Could you, guys, give some hits, what I missed and where I should define the whrehouse process type for the putaway WT?
    Thank you in advance
    BR
    Denis

    Hi Petr,
    thnaks for the help once again,
    I did some settings you and Alex proposed and now I can see than my action will be found when creating Outbound Delivery Order:
    But even I have only one condition record to my action "PDO_01_WT_CREATE" it will not be fulfilled...log says
    I also changed the GM status to NSNS...can I somehow find out which conditiontion the programm is claiming about?
    BR
    Denis

  • Function Module to Fetch data of Vendor for Inbound Delivery at runtime

    Hi All,
    I am new to EWM. I am using BADI /SCWM/EX_DLV_DET_PROCTYPE method CHANGE_PROCTYPE to change process type of the inbound delivery as per some logic from a custom table. However the parameter Vendor is not available in IS_ITEM during inbound delivery creation. Vendor is one of the key fields in my table.
    Does anyone know any solution/function modules to fetch vendor data for the inbound delivery at runtime. I know the database tables to fetch vendor but this works only once the inbound delivery is saved.
    Thanks and Regards,
      Vanessa Noronha

    Hi All,
    I am new to EWM. I am using BADI /SCWM/EX_DLV_DET_PROCTYPE method CHANGE_PROCTYPE to change process type of the inbound delivery as per some logic from a custom table. However the parameter Vendor is not available in IS_ITEM during inbound delivery creation. Vendor is one of the key fields in my table.
    Does anyone know any solution/function modules to fetch vendor data for the inbound delivery at runtime. I know the database tables to fetch vendor but this works only once the inbound delivery is saved.
    Thanks and Regards,
      Vanessa Noronha

Maybe you are looking for