Exception in PAPI WS

Hi,
We are trying to create instance through PAPI-WS and passing the arguments for the process. The code:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:pap="http://bea.com/albpm/PapiWebService">
<soapenv:Header/>
<soapenv:Body>
<pap:processCreateInstance>

<targetProcessId>TestHeadOfficeProcess</targetProcessId>

<argumentsSetName>BeginIn</argumentsSetName>

<arguments>
<arguments>

<entry>

<key>applicationIDArg</key>

<value>100</value>
</entry>
<entry>

<key>appProductIDArg</key>

<value>100</value>
</entry>
<entry>

<key>repositoryIdArg</key>

<value>100</value>
</entry>
</arguments>
</arguments>
</pap:processCreateInstance>
</soapenv:Body>
</soapenv:Envelope>
When I am trying to execute the code through SOAP UI, I am getting the following error which is mentioned below-
<S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
<faultcode>S:Server</faultcode>
<faultstring>Instance '/TestHeadOfficeProcess#Default-1.0/279/0' was not found.</faultstring>
<detail>
<ns2:OperationException xmlns:ns2="http://bea.com/albpm/PapiWebService">
<exceptionName>fuego.papi.exception.InstanceNotFoundException</exceptionName>
<message>Instance '/TestHeadOfficeProcess#Default-1.0/279/0' was not found.</message>
<technicalInfo>fuego.papi.exception.InstanceNotFoundException: Instance '/TestHeadOfficeProcess#Default-1.0/279/0' was not found.
Please suggest what can be the issue and resolution for the same.
Thanks,
Abhishek

Hi Dan,
Thanks for the document but I would like to tell you that I have already performed the steps you mentioned in the document. The error which I have raised in the above message still persists.
I found one more error with severity "Severe" while Oracle BPM Engine Logs which is as follows-
The external variables could not be retrieved from instance '/TestHeadOfficeProcess#Default-1.0/25/0'.
Reason: CurrentProject.Instance.getApplicationID()Ljava/lang/String;
java.lang.NoSuchMethodError: CurrentProject.Instance.getApplicationID()Ljava/lang/String;
     at oracle.TestHeadOfficeProcess.Default_1_0.Instance.getApplicationID(Instance.xcdl)
     at oracle.TestHeadOfficeProcess.Default_1_0.Instance.CIL_$getExternalVars(Instance.xcdl:1)
     at fuego.server.ProcInstOperations.CIL_$getExternalVars(ProcInstOperations.java:57)
     at fuego.server.ProcInst.fillInfo(ProcInst.java:3845)
     at fuego.server.ProcInst.getInstanceInfo(ProcInst.java:720)
     at fuego.server.AbstractProcessBean$24.execute(AbstractProcessBean.java:1333)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeImmediateNotLocking(DefaultEngineExecution.java:168)
     at fuego.server.execution.EngineExecution.executeImmediateNotLocking(EngineExecution.java:77)
     at fuego.server.AbstractProcessBean.getInstance(AbstractProcessBean.java:1308)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:585)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Please suggest what is the issue and the resolution for the same.
Thanks,
Abhishek

Similar Messages

LaserJet 2100 paper feed

I am trying to get my LaserJet 2100 up and running after several years of no use. Everything is looking "ok" except the paper feed. After I print a page and it is discharged into the tray, a second sheet is fed about halfway and stops. Then when I try to print another page I get a paper jam signal. Paper size on my page set up is 8 1/2 x 11. I have tried both of the drivers that are listed on the HP site. I am running XP on a Dell Inspiron 6000 lap top. It only has USB ports for printing, so am using an adapter to interface with the printer. It is set up to run through a virtual printer port via USB.
What to Do?

I have experienced this on some other devices, so I will share the following ideas:
First, by your description, this appears to be a hardware problem rather than anything to do with connectivity although you mentioned it. Specifically, the paper feed mechanism which relies on friction feed to pick up the paper. It is picking up more sheets at once than it should. The top sheet gets pushed off, but due to extra friction from the paper pickup roller, a second sheet also gets pushed out of the tray, but lags behind the first sheet and only partially makes it way though the paper path.
Due to the "several years of no use" as you mentioned, it is possible the rubber on the paper pickup roller has dried out over time and become a harder material. That could affect the amount of friction and how it contacts with the paper for paper pickup.
Here is a test you can run:
Try varying the amount of sheets you have in the tray. The tray is spring loaded, so it contains a spring which pushes the paper up against the pickup roller. Often the amount of paper you have in tray will affect how much that spring is enguaged, and this will affect the friction against the paper pickup roller. Try changing the amount of sheets you have in the tray.
If that test does not show any improvement, try using a different paper or replacing the paper pickup roller.
Just some ideas...

HP Photosmart Premium C310a Printer paper alignment and paper feed problem.

Standard Info:
HP Photosmart Premium C310a Inkjet All-in-one Printer.
Windows 7 Home Premium
No reported errors messages except for paper jams.
No changes were made to the system before the problems began.
My Info:
I am very proficient with computers and electronics. I would first like to say that this printer has very vibrant inks and its ColorSmart/sRGB ICC profile is pure magic. The high DPI ratings have turned out to be accurate so far and the printer prints beautiful images.
Problems:
The problem I am having is with the printers paper feed rollers. They are not scrolling the paper through the printer accurately and consistantly. There have also been two paper jams when using multipurpose everyday paper. When printing high res artwork using HP Advanced Photo Paper I was using HP Photosmart Essentials to create an 8"x10" picture on the 8.5"x11" paper and the first 35-40 prints came out accurately but then, before any paper jams or other problems the 8x10 pictures began to not center correctly on the paper. Then the top of the 8x10 picture started slanting to the right on the paper and extending too close to the right edge of the paper. The entire 8x10 picture is no longer printing 8x10 (the left side of the picture is just over 8" tall and the right side of the picture is printing just under 8", same thing with the top and bottom edges of the image) and is not centering properly on the paper. I just had my second paper jam last night which I clicked the "cancel print" button on the front of the printer touch display to eject the paper. Immediately after, everything began printing very close to the left edge of the paper and prints at an angle down the sheet no matter what it is that I print or what paper it is printed on. I have tried using the auto alignment feature on the printer several times and it does not help.
Questions:
Is this printer purchased on 09/25/2011 from hp.com (with no extended warranty) still under a regular warranty?
If I send it in for repairs will HP be able to fix these problems?
Is there any way that I can adjust the scrollers myself to fix the problem?
Is the new C510a more reliable than the C310a in this field?
I need a backup printer for my art business, I would like to purchase an HP C510a, but am concerned I will have the same problems with the new one.
If anyone can help, please respond. I cannot go on with these problems any longer.
Thank you for your time,
Nanette

Thank you for your quick response Bob. Your answer was helpful, but did not solve my problem. I have cleaned the printer exactly as your response has suggested, but there has been no change, and I was not able to find any dirt, scum, dust, or anything at all wrong with the rollers.
Here are a few pictures of some 8"x10" pictures that I just printed on 8.5"x11" HP Advanced Photo Paper:
These 8"x10" images are supposed to be centered on the paper, but are FAR from centered or dimensionally accurate to 8"x10".
This last image shows really well how the top of the 8"x10" image slants downward from left to right as well as approaches too close to the right edge of the paper.
Is this a problem that I can fix on my own?
If I send the printer to HP for repairs will they be able to fix this problem or will they just clean the printer scrollers and send it back thinking it is fixed?
I really need help with this problem, because right now, the printer is not useable.
Thank you for your help.
-Nanette

Exception handling in OBPM

Hi,
I am calling Global interactive service using PAPI service.
In global interactive activity->method I am calling the custom DB [using proxy service] method.
I need to check the success of the call and need to store the result as true in argument variable.
When DB services are running then I am getting correct result in argument [result=true]. But whenever DB service is in "Stop" mode then i am getting error in output. I need to handle this error/exception and I need to send result variable as false [result=false].
Exception: fuego.papi.exception.ActivityFailedException
In this case How I can handle the exception/error coming when DB service is in stop mode.
Kindly send me your suggestions.
Edited by: user12262818 on Aug 23, 2010 12:34 AM

Hi Jayakrishna,
In General , there are non execptions in BAPIs, because of the reason, that the exception raised in a SAP envoronment may not mean anything for a non SAP initiator. All the exception situations would only fill the return table(TYpe BAPIRET2 or something like that). If you read that table after the call to the bapi, you can understand what has gone wrong.
Regards,
Ravi

Papi-ws: could not call activityExecute

Hello
i am using papi-ws , and want to move my instance from state to other, means execute the activity to accept/or reject it depends on user input :
I am suing papiws,activityExecute() , the request looks like this:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:pap="http://bea.com/albpm/PapiWebService">
<soapenv:Header/>
<soapenv:Body>
<pap:activityExecute>
<activityName>ReviewTransfer</activityName>
<instanceId>/TransferProcess#Default-1.0/26/0</instanceId>
<arguments>
<arguments>
<entry>
<key>myObJ</key>
<value>
<![CDATA[<TransferObject>
<isApproved>true</isApproved>
</TransferObject>]]>
</value>
</entry>
</arguments>
</arguments>
</pap:activityExecute>
</soapenv:Body>
</soapenv:Envelope>
but i got exception:
fuego.papi.OperationException: Operation exception.
     at fuego.papi.OperationException.wrap(OperationException.java:65)
     at fuego.papi.impl.ProcessInstanceOperation.runActivity(ProcessInstanceOperation.java:735)
     at fuego.papi.impl.ProcessServiceSessionImpl.activityExecute(ProcessServiceSessionImpl.java:1559)
     at fuego.papi.impl.ProcessServiceSessionImpl.activityExecute(ProcessServiceSessionImpl.java:1498)
     at fuego.papi.impl.ProcessServiceSessionImpl.activityExecute(ProcessServiceSessionImpl.java:1519)
     at fuego.papi.webservice.ProcessServiceSession.activityExecute(ProcessServiceSession.java:2339)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccess

Hi Matthias,
If you don't have to use Username Token Profile, you can use HTTP Basic Authentication instead.
If you are forced to use Username Token Profile, I'm glad to tell you that the bug has been fixed in 10.3.2. The bad news is that the fix is not just applying the HF. You have add some properties and configure you WLS Domain accordingly.
As the configuration is not that simple, I suggest contacting Oracle Support.
Hope this helps,
Ariel

Java papi client 57 UserTransaction lookup fails

Guys,
I am trying to write PAPI client which is to run from Tomcat and connecting to ALBPM 5.7 Enterprise which is on Weblogic 92.
I am able to do all operations how ever do see exceptions when PAPI tries to connect to News Topic.
Please let me know if some one has seen this problem in ALBPM5.7 and how it was resolved. I think fix may be in directory.properties by adding/removing some properties but dont know what.
Following is the error message
An error occurred when subscribing to the JMS Topic engine. Reason:'While trying to lookup 'java:comp.UserTransaction' didn't find subcontext 'java:comp'. Resolved ''
Caused by: While trying to lookup 'java:comp.UserTransaction' didn't find subcontext 'java:comp'. Resolved ''
When I checked in directory database, I see following XML in FUEGO_CONFIG table
<?xml version="1.0" encoding="UTF-8"?>
<?fuego version="5.7 GA SP3" application="albpmenteprisej2ee"?>
<set>
     <configuration name="myengine_ENGINE_DB_FUEGOLABS_ARG" type="SQL" subtype="ORACLE">
          <property name="jdbc.pool.idle_timeout" value="5"/>
          <property name="oracle.driver_type" value="thin"/>
          <property name="oracle.dateEqualsTimestamp" value="false"/>
          <property name="jdbc.schema" value="myengine"/>
          <property name="jdbc.host" value="localhost"/>
          <property name="user" value="myengine"/>
          <property name="jdbc.port" value="1521"/>
          <property name="jdbc.pool.min" value="0"/>
          <property name="jdbc.pool.maxopencursors" value="50"/>
          <property name="oracle.sid" value="xe"/>
          <property name="password" value="<encrypted>gGocbn15UL8="/>
          <property name="jdbc.xa" value="false"/>
          <property name="jdbc.pool.max" value="10"/>
     </configuration>
     <configuration name="*myengine_J2EE_LOCAL_FUEGOLABS_ARG*" type="*J2EE*" subtype="*LOCAL_J2EE*">
          <property name="*javax.user.UserTransaction*" value="*java:comp/UserTransaction*"/>
     </configuration>
     <configuration name="myengine_J2EE_RUNTIME_FUEGOLABS_ARG" type="SQL" subtype="REMOTE_JDBC">
          <property name="lookupName" value="XAmyengineDS"/>
          <property name="jdbc.remote.type" value="ORACLE"/>
          <property name="j2ee.provider" value="myengine_J2EE_LOCAL_FUEGOLABS_ARG"/>
     </configuration>
     <configuration name="myengine_J2EE_FDI_FUEGOLABS_ARG" type="SQL" subtype="REMOTE_JDBC">
          <property name="lookupName" value="XAFDIDS"/>
          <property name="jdbc.remote.type" value="ORACLE"/>
          <property name="j2ee.provider" value="myengine_J2EE_LOCAL_FUEGOLABS_ARG"/>
     </configuration>
</set>
Following is my directory.properties (I have tweaked a bit to make it work)
# Directory configuration
# The following properties define the configuration for a directory provider.
# Do not modify the prefix of the properties. Always leave "directory.default."
directory.default.url=oracle://localhost:1521/schema=BEA_FDI,sid=XE
#directory.default.provider=oracle
#directory.default.connector-subtype=ORACLE
#directory.default.directory-res-ref-name=myengine_J2EE_FDI_FUEGOLABS_ARG
# preset properties.
directory.default.preset.datawarehouse.participant=administrator
directory.default.preset.engine.participant=administrator
directory.default.preset.portal-anonymous.participant_password=<crypted>UA7jo3Pvnu12sc/NMcxJ3ijnJHzgtte9YqKhr3hkgQJeZK2sN9b9waFaN6N8S/fMtkcMRWpbMrUVCeXN8zvx7OLaGtCTBQ==
directory.default.preset.xobjects.participant=administrator
directory.default.preset.datawarehouse.participant_password=<crypted>UA7jo3Pvnu12sc/NMcxJ3ijnJHzgtte9Yp/TapxzhLBvmq3JAXqZ/pOgfmVZxXpleLmdse9pFPjhFG4SH4/hmKPhJg==
directory.default.preset.xobjects.participant_password=<crypted>UA7jo3Pvnu12sc/NMcxJ3ijnJHzgtte9YrahnQoZYB8e7NkVzsFfeKe9qrv/oXpltEQYTDSxMrUVCeXN8zs=
directory.default.preset.engine.participant_password=<crypted>UA7jo3Pvnu12sc/NMcxJ3ijnJHzgtte9YmixG3O3OYx0FW4CpqZf/pP8fnS8vEpQ6fpD8kG9FNGrZQhP
directory.default.preset.portal-anonymous.participant=administrator
# custom properties.
# fuego properties.
directory.default.jdbc-user=BEA_FDI
directory.default.jdbc-password=password
#directory.default.skip-auth=true
If you see I have commented following properties above which is basically referring to elements in XML which I have pasted above.
#directory.default.provider=oracle
#directory.default.connector-subtype=ORACLE
#directory.default.directory-res-ref-name=myengine_J2EE_FDI_FUEGOLABS_ARG
Similarly there is UserTransaction entry in FUEGO_CONFIG table xml as highlighted in bold.
Is there any fix/tweak in directory.properties which will resolve my problem?
Thanks in advance for helping.
Anil
Edited by: Anil Hemnani on 22-Apr-2010 23:30
Edited by: Anil Hemnani on 22-Apr-2010 23:30
Edited by: Anil Hemnani on 22-Apr-2010 23:31

Dear fellow forum members,
For future reference:
After a very very long time we received advise from SAP to perform actions we already suggested.....
We have ´hacked´ the keydb.xml file. We must say that SAP gave good detailed advise on which entries to change:
1#. Log on to ABAP and check what password was set for user "ADS_AGENT"
2#. Go to:
/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ADA/CENTRAL/CI/
1. Save a backup of "keydb.xml" first.
2. Find the following lines at the keydb.xml:
This solved the problem for our customer, so this question can be marked as answered by Casper (my colleague). We hope that SAP will launch a patch to solve this problem, as it has cost us a lot of time and we can imagine that other consultants are facing the same issues, as this seems to be a hashing mechanism that does not perform/work correctly.
Best regards,
Jan Laros

False paper jam reported on Photosmart C7250

I have been using my Photosmart C7250 for the past 2 1/2 years without a problem. Ny configuration is: Windows 7 (32 bit), Ethernet wire connection with fixed IP address. I get a paper jam message. I have checked that there is no paper jammed. I have cleaned the pronter thourolly (but carefully) and even used (sparingly) some compressed air to clean the whole paper path. I have don all the recommended cleaning / reset procedures.
Once i have reset the printer, i can print a document without a problem. Once the last page is printed, however, i get the papaer jam message. I have even tried to do double-sided printing withoout any errors, except the paper jam message after printing.
What else can i do? Is it worth it to take it to a repair shop or is it better to buy a new printer (since i can get one for less than $100)

Hi @nana1663
Sometimes paper jam messages can be false. From your description, it sounds like maybe resetting the printer could resolve the issue.
I will send you a PM (Private Message), but before I do, feel free to review the HP Privacy Statement.
This Privacy Statement informs you of our privacy practices and of the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is readily available on our HP.com home page and at the bottom of every HP web page.
There are an increasing number of posts in this forum and elsewhere in the internet with the steps to do a resets on different printers. The reset itself will sometimes fix problems, so the reset is not the issue.
Some resets require you to enter button combinations to open special menus on your printer that you were never meant to access. These special menus are used by the developers and support personnel for debugging issues, but they are not meant for untrained users and can have unintended results. One wrong button push and you no could no longer have a printer, but instead a pricey paper weight. To top it off, if you do happen to "brick" the printer this way, it is considered customer induced damage, and voids the warranty automatically. These resets are only meant to be given out and used as a last resort, and under direct instruction of a HP tech support representative. They should not be done lightly!
Printer Resets: What You Should Know
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

GetInstancesByFilter: Exception

Hi All,
I am facing some problem while filtering the instance by connecting to the engine.
I am using ALBPM 5.7 and for filtering using the Fuego API.
The exception I am getting is given below.
Process: SourceInitiateProcess
Task: Initialize
Exception Time: 08312010, 22:07 PDT
Message: Could not execute filter for any process.
Internal exceptions:albpmSvr: Cannot retrieve instances from engine 'albpmSvr'.
Caused by: Process execution engine execution error.
Caused by: Bean is already undeployed.
Exception:fuego.papi.exception.FilterBatchOperationException: Could not execute filter for any process. Internal exceptions: albpmSvr: Cannot retrieve instances from engine 'albpmSvr'. Caused by: Process execution engine execution error. Caused by: Bean is already undeployed. fuego.papi.exception.InstancesNotAvailableInEngineException: Cannot retrieve instances from engine 'albpmSvr'. at fuego.papi.impl.InstanceCache.getInstancesByFilter(InstanceCache.java:294) at fuego.papi.impl.ProcessServiceImpl.getInstancesByFilter(ProcessServiceImpl.java:1087) at fuego.papi.impl.ProcessServiceNESessionImpl.getInstancesByFilter(ProcessServiceNESessionImpl.java:755) at fuegoblock.papi.ProcessService.getInstancesByFilter(ProcessService.java:146) at xobject.Scheduler.DataService.SchedulerProcessService.sourcePollProcess(SchedulerProcessService.java:705) at SVB.SourceInitiateProcess.Default_1_0.Instance.CIL_initialize(Instance.java:812) at SVB.SourceInitiateProcess.Default_1_0.Instance.CIL_initialize(Instance.java:838) at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source) at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source) at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:915) at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1076) at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:389) at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:490) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:677) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:638) at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:152) at fuego.server.execution.activities.XAutomatic.execute(XAutomatic.java:58) at fuego.metadata.Activity.execute(Activity.java:1040) at fuego.server.execution.ToDoItemAutomatic.execute(ToDoItemAutomatic.java:35) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:291) Caused by: fuego.papi.impl.EngineExecutionException: Process execution engine execution error. at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:153) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:66) at $Proxy47.getInstancesByFilter(Lfuego.papi.Filter;)Lfuego.papi.impl.FilterResult;(Unknown Source) at fuego.papi.impl.InstanceCache.getInstancesByFilter(InstanceCache.java:554) at fuego.papi.impl.InstanceCache.getInstancesByFilter(InstanceCache.java:247) ... 19 more Caused by: java.rmi.NoSuchObjectException: Bean is already undeployed. at weblogic.ejb.container.manager.BaseEJBManager.preInvoke(BaseEJBManager.java:141) at weblogic.ejb.container.manager.StatelessManager.preInvoke(StatelessManager.java:127) at weblogic.ejb.container.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:213) at weblogic.ejb.container.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java:64) at fuego.ejbengine.EJBProcessControlAdapter_1cf85o_EOImpl.getInstancesByFilter(EJBProcessControlAdapter_1cf85o_EOImpl.java:1983) at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source) at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source) at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:48) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:111) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:118) at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:66) at $Proxy47.getInstancesByFilter(Lfuego.papi.Filter;)Lfuego.papi.impl.FilterResult;(Unknown Source) at fuego.papi.impl.InstanceCache.getInstancesByFilter(InstanceCache.java:554) at fuego.papi.impl.InstanceCache.getInstancesByFilter(InstanceCache.java:247) at fuego.papi.impl.ProcessServiceImpl.getInstancesByFilter(ProcessServiceImpl.java:1087) at fuego.papi.impl.ProcessServiceNESessionImpl.getInstancesByFilter(ProcessServiceNESessionImpl.java:755) at fuegoblock.papi.ProcessService.getInstancesByFilter(ProcessService.java:146) at xobject.Scheduler.DataService.SchedulerProcessService.sourcePollProcess(SchedulerProcessService.java:705)
Bibhu

Hi,
we are getting same type of issue as below...
Caused by: fuego.papi.exception.FilterBatchOperationException: Could not execute filter for any process.
Internal Exceptions:
XBB_PROD6_MRI_ENGINE_6:Cannot retrieve instances from engine 'XBB_PROD6_MRI_ENGINE_6'.
at fuego.papi.impl.InstanceCache.getInstancesByFilter(InstanceCache.java:345)
at fuego.papi.impl.ProcessServiceImpl.getInstancesByFilter(ProcessServiceImpl.java:1469)
at fuego.papi.impl.ProcessServiceSessionImpl.processesGetInstancesByFilter(ProcessServiceSessionImpl.java:2099)
at com.jpmorgan.gcrm.bpm.albpm.utils.PapiWS.isInstanceExist(PapiWS.java:576)
Please help me out... Thanks in advance..

Random crash leaves me without a phone for the evening and more...

I've had no major problems (just minor annoyances) with the iPhone, since buying it the day it was released, until last night. I went out to the bar and was showing off the phone to some friends (surfing the web and YouTube videos) when, with just my luck, the phone resets (not the typical crash to the home screen I’ve seen). After the phone reset and began to power back on the screen said "Please Connect to iTunes." I thought this was strange as I had a fully charged battery before going out and figured that I could probably just reset the phone again to get past this. Unfortunately this wasn’t the case. At this point there was nothing I could do to get my phone working again as I'd lost ALL functionality of my device (except stylish paper weight). I thought this is just plain ridiculous as now I’m going to be stuck without a phone for the rest of the night hoping no emergency comes up where I’m going to need it (thankfully the rest of the night was to the most part uneventful). I’ve never had something like this happen, that is where I can’t use the device, to any of the previous half-dozen or so phones I’ve owned. But that was that and there was nothing I could do until I got home several hours later.
After finally arriving home I quickly connected the phone to iTunes which of course began the restore process. For the most part the process went fairly smooth but did take some time (about 10 minutes with all the verifying/restoring). During the process iTunes recognized my last backup, applied that to my phone, and reactivated the phone with AT&T. Everything was quite painless until finding out that iTunes doesn't quite back up everything which I've now found out and included a list of everything lost:
... Photos from my Camera Roll (this is the worst, lesson learned)
... Wi-Fi known networks and their passwords
... Mail account passwords
... Mail account messages (all messages had to be downloaded again)
... Calendar events that were recurring now appear twice
... All music/videos/photos had to be resynchronized
I'm still a little shocked that the phone can crash to this degree, at anytime, where you'll lose complete functionality of the device until you connect to iTunes. I mean come on what is not functioning properly that won’t allow me to restart/reset the phone? Good thing I wasn’t on Vacation or else I would’ve been totally screwed for the trip. Also, this was a lesson learned for me to backup my Camera Roll photos as I just never really thought about it before. Everything else lost was just an inconvenience in having to manually add passwords back, read/delete mail messages again, and delete duplicate recurring calendar events.
I just wanted to share my bad experience and hopefully Apple will continue to improve this device whereas it doesn't become completely useless for the evening. I still love my phone and this is by far the most trouble I’ve had with it.

Yeah, it would be nice if the backup contained a little more well backup. The Camera Roll photos should be synced or at least have an option to do so. Mail messages and passwords can't take up that much space and could easily be encrypted (again have an option to not back up if so desired). As for the duplicate calendar events I think it's just flaky with using Outlook to begin with.
...feedback has been left =)

C3180 All in One not printing on photopaper

Whenever I try to print with photopaper it will be fed through but stop as soon as it's about an inch or so in. Jams do occure, but not always, and I'm finding that the printer seems to be having a hard time grabbing the paper in general. BUT, when I press cancel, it will feed through as it should. So I know that printer is capable of handling the paper, and I know it's not too glossy/thick because I've printed three photos already (though not without strife).
All in all, it acts as though the feed's not working but I know it does, I know it the paper IS compatible, it just doesn't seem to want to work. My ink is new, the quality of the ones that DID print are exceptional, normal paper works fine, it's just these strange ( for lack of a better word) jams are a constant hindrance and I don't know what to do.

Hi - A couple of things to try. First, when you click File, Print, go into properties and change the paper type setting from Automatic to the type of photo paper you have. It could be having a problem automatically sensing the type of paper.
If that doesn't resolve the issue, try cleaning the paper feed rollers as referenced on solution four in this document.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

11G BPM workspace shows nothing after login

Hi,
I am new to BPM. I installed weblogic, soa suite on my laptop. When I login to BPM workspace I get login screen but after that its blank nothing shows up.
Here are parts of log file for soa_server1
Any Idea thanks
Bikram
####<Nov 18, 2010 3:47:46 PM CST> <Info> <Common> <BIPANDHE-E4300> <soa_server1> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@f32dc9> <<anonymous>> <BEA1-33B76A3AFBDD> <c91ab9e973f25cc1:-1e0709d8:12c60c39495:-7ffd-0000000000000002> <1290116866671> <BEA-000628> <Created "1" resources for pool "SOADataSource", out of which "1" are available and "0" are unavailable.>
####<Nov 18, 2010 3:48:21 PM CST> <Error> <HTTP> <BIPANDHE-E4300> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c91ab9e973f25cc1:-1e0709d8:12c60c39495:-7ffd-00000000000019df> <1290116901937> <BEA-101020> <[ServletContext@26164483[app:OracleBPMWorkspace module:/bpm/workspace path:/bpm/workspace spec-version:2.5]] Servlet failed with Exception
fuego.papi.OperationRuntimeException: Runtime operation error.
     Caused By: fuego.papi.OperationException: Operation exception.
     at oracle.bpm.papi.ora.mgr.OrganizationManager.lookupParticipant(OrganizationManager.java:68)
     at oracle.bpm.papi.ora.mgr.OrganizationManager.lookupParticipant(OrganizationManager.java:44)
     Caused By: ORABPEL-10585
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
     at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.lookupUser(AbstractIdentityServiceClient.java:195)
Caused By: java.lang.RuntimeException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     at oracle.bpel.services.identity.client.IdentityServiceSOAPClient.invoke(IdentityServiceSOAPClient.java:285)
Caused By: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     Caused By: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
     Caused By: java.net.ConnectException: Connection refused: connect

Please review note 1135814.1 in My Oracle Support. If this does not work for you, review your /etc/hosts file and make sure all your entries are right, i.e. your hostname is mapped to the correct host IP instead of 127.0.0.1.

HP Photosmart pro print

So, about 3 weeks ago, I discovered this plug-in and really enjoyed it:
Automate--->Photosmart Pro print
Well, this week I must have done something, and I need to figure out how to fix it. I've tried uninstalling and reinstalling everything but Photoshop (CS), and spent the entire day talking to HP tech support. No one can figure it out. So hopefully, one of you experienced my problem and know how to fix it.
When I do it now, the print page pops up, and everything appears normal except the "Paper Type". This field is blank. I drop down the arrow, and it's a big, blank, void. Just a giant white box. A week ago, there were a bunch of choices in there.
Please help. I'm tired and stressed out. Thanks in advance.

bump....still no solution. please help!

Cancelled E-Mail

I just cancelled my landline because for the past 3 months I've had so much noise on the line that my phone was virtually rendered useless. They checked the lines and said they found no problem, however they agreed they could not hear me over the noise on my line and called me back to talk via my cell. Any hoot after 3 months of this, I finally cancelled. That's not the problem. The problem is, when I did they disabled my email even though I still have FIOS internet and t.v. How's that for a kick in the head. If I had known I would have written down my contact addresses, now they're lost - I'd write them to get them and give them my new hotmail address, but, oh ya, I don't know them. Bottom line is, write stuff down - computers were suppose to help go paperless, but hey where do you keep a backup except on paper.

You'll have to contact iTunes store support to see if they can help you with this: http://www.apple.com/emea/support/itunes/contact.html.

About the parameter -XXaltjvm

I am using java for linux and java 1.4.2.
When I run
strings /usr/java/j2sdk1.4.2/bin/java | grep '\-X'
I get some strings look like parameter of java
In it have
--XXaltjvm
-Xtm
I am not sure if they are valid parameter and how to use them
Thanks for any comment
gan

Hello Alexis,
I have former confuse is because
document said hotspot compiler use less space than JIT compile and with a little speed lost. So I think hotspot compiler is not JIT compiler.
It may have follow conclusion:
static JIT compiler may be classic JIT compiler
dynamic JIT may be hotspot compiler
I would like to know some details about hotspot realization in J2ME,
But there are too few document can be found except white paper.
Hotspot in J2SE may have more informations.
Thanks for you reply
gan

Scrambled and Erratic Printing Operations?

We have an HP Designjet T520. It is accessed by multiple workstations over our in office network. It is that we use it connected to the network via it's WIFI capability, but have also used it hard wire connected to the network, our problem appears either way. The problem that we are experiencing is one of erratic printing operations. Some pages print fine, others print with areas blank that should contain information, some sheets start to print then just stop and are cut off at about 6". The printer acts like it is going to print fine, it at times will print maybe 2 or 5 sheets of an 8 sheet job then stop and spit out (2) or (3) 6" strips of paper with mirrored information that is scrambled. Or at times you will send it a print job and it will not do anything, so you then discover that it has unloaded the paper, so you reload the paper, and it unloads it again, then it decides to finally except the paper then it prints a page, then it prints the next with information missing, then you might guess a person or two or three begin to get a little angry. We have powered it down and restarted it, only to get the same type of scrambled and erratic operations. What is our problem here?

+Still trying to determine exactly what got corrupted on the old account.+
You could trash numerous preference files and still not find the source of the problem. Count your blessings that you use OS X and not Windows. You solved the problem with a few minutes of work, not hours wiping the drive and reinstalling everything.
John

Exception in PAPI WS

Similar Messages

Maybe you are looking for