AC 6.01 Message: Find wireless Network is disabled. Contact your network administrator

hi, i cant manage wireless networks with AC 6.01.  Profile "Create" is greyed out and I am not able to create new profiles, can't find new wireless network etc. Few weeks ago, everything was working fine. When I try  Fn+F5 and click "Find Wireless Netowork" I got message "Find wireless Network is disabled. Contact your network administrator". I am administrator on computer.
What i found interesting is that if i stop the service "AcPrfMgrSvc" from services.msc, i can find networks but then i cant use AC profiles i.e. cant create profiles and cant connect to any saved profile. This problem gave me real headache. This might be a problem due to any windows update.
I m using Windows 7 on Thinkpad E520. Please helppppp....

I don't think this is a Windows update problem.  I encountered this same problem
immediately after I allowed Lenovo to update my laptop a month or so ago.  (I have
always refused to allow Lenovo to update my system since I didn't trust them -
apparently with good reason - but I finally said OK.  (My Windows 7 OS has not been
updated since Nov. 2012.)  Lenovo has been no help in fixing the problem they
created (which has put Lenovo at the bottom of my list for future systems - see below.)
I have not tried disabling "AcPrfMgrSvc", I am only commenting on not being able
to Find Wireless Networks.  I have read posts/comments in various places saying
to revert to a previous "version" of something (I don't remember what - AC?), but
have found nothing that explicitly states how to do that - as if it should be obvious.
Not helpful either.  Documenting that would be the least Lenovo itself could do.  (I
did try reverting to a full system backup I had made the day before, but I found I could
not do that without having a system disk that Lenovo said would cost $50 - which also
means NONE of the backups I have done over the last year and a half have any
value?)
So I have pretty much stopped using my two recent Lenovo systems and gone back
to my 9-year old Linux system.

Similar Messages

  • AC 5.12 Message: Find wireless Network is disabled. Contact your network administrator

    I can't manage access conection. I can't select "Create New Profile" and I am not able to create new profiles, can't find new wireless network etc. Few weeks ago, everything was working fine. When I try  Fn+F5 and click "Find Wireless Netowork" I got message "Find wireless Network is disabled. Contact your network administrator". I am administrator on computer. I installed AdminEnabler.exe but still doesn't work. I use XP Pro and Access Conection version 5.12. Thanks in advance. 
    Moderator note: subject line specified for clarity.
    Message Edited by Agotthelf on 16-08-2009 03:18 PM

    Hm, I can't remember how I did this but I think that I removed instalation from add/remove programs. Also find the folder where are the files, there you also you may find exe file which will remove all instalation. My is in C:\Program Files\ThinkPad\ConnectUtilities. KillAC.exe is file that you may need.
    After this, go to support and download pages and from there you should download and install newest version.
    Should solve the problem.

  • Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

    Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80004005-00000000-00000000].
    In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
    moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
    + at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
    mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that. 
    But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
    a new, unusual issue I have seen as well. 
    We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
    up.
    Thanks.

    Hi,
    You can refer to the following steps to rebuild an Offline Address Book.
    1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
    2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
    3. Start Outlook and download OAB.
    What's more, here is an article for your reference.
    How to Quickly Rebuild an Exchange 2010 Offline Address Book
    http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • I got this message:" Software Update Update failed Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." What on earth is this about? I am not computer savy.

    I got this message:" Software Update Update failed Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." What on earth is this about? I am not computer savy.

    taken from https://support.mozilla.com/en-US/questions/826858:
    ''This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file all.js or firefox.js''
    ''Download a fresh Firefox copy and save the file to the desktop.
    Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html ''
    ''Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.''
    ''Do not remove personal data if you uninstall the current version.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.''
    ''Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.''
    ''If the problem persists See also:
    https://support.mozilla.com/en-US/questions/815130?page=2#answer-185385''
    Check and tell if its working.

  • Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....

    Have you tried re-booting your WiFi router ?  It may seem OK on your PC, but a re-boot may help.

  • I'm getting an error message from Firefox that says, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help."

    I'm getting an error message from Firefox that says, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." Do you know what is going on here--what this problem could be? (I do have the latest Firefox version already installed. I have previously received Firefox error messages that say "Firefox Update Failed." However, I already had the latest Firefox version installed when I received those error messages.)

    Apparently this occurs when Firefox has problems with security certificates. There have been a few questions about this. I will try to get advice about this.
    Apparently you are using Internet Explorer 9 (From your system details). Do you have Google Updater plugin installed on Firefox ?
    (That been implicated in this sort of problem by one poster, and some users with the problem do have Google Updater, but some do not)

  • This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000]

    Software: Microsoft Office 2007 Professional Plus
    Service: Microsoft Office 365 - Cloud Hosted
    Hello,
    I have a user who receives this error when trying to send a calendar invite to her coworkers (names have been changed for privacy):
    The following recipient(s) cannot be reached:
          Megan Bennis on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
          Charity Lurk on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
          Susan Parker on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
    All three of these users are in her address book, and are all in her office residing on the same Office 365 domain account.
    I have tried the troubleshooting methods outlined in this article, but they did not resolve the issue: http://theitbros.com/office-365-this-message-could-not-be-sent-try-sending-the-message-again-later/
    - This entailed manually downloading/updating  the address book via 'Send/Receive --> Download Address Book...'. The second method in that article had me rename/move/delete the Address Book files stored on the local machine, and then allow them to
    repopulate when you open Outlook again. This also did not resolve my issue.
    Any ideas? Thanks in advance!

    That's the kind of message you will see when trying to send on behalf of/send as another user, when you don't have the necessary permissions added. Or you are using the wrong send method, or using an outdated name cache entry, or the OAB is outdated.

  • The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

    Hi,
    When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
    "The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
    If this problem persists, contact your network administrator."
    It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
    But it is working in Firefox.
    Please help me on how to fix this issue.
    Thanks.

    Hi Htet,
    Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
    http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
    http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
    http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
    Thanks
    Daniel Yang
    TechNet Community Support

  • HT1145 I downloaded the Airport Utility 5.6 for OS X Lion and when I finish installing it sends a message that says "the instalation failed contact your software provider"

    I downloaded the Airport Utility 5.6 for OS X Lion and when I finish installing it sends a message that says "the instalation failed contact your software provider" And seems like thats the solution so I can use my time capsule.
    Thanks

    Thanks. Please review my post above to see that we asked five basic questions.
    Looks like we got two answers.
    Can you please provide answers to the other questions that we asked?
    1)  Are you trying to connect your Time Capsule to your modem using an Ethernet cable?
    2)  What is the make and model number of your modem?
    3)  Are you still using Lion (10.7.5) as you indicate in your profile, or have you updated to Mountain Lion or Mavericks?
    I understand that things appear clear to you there, but we cannot read your mind or see your network, so we only know as much about your problem and your network as you can tell us.

  • RemoteApps Error "Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator."

    Hello All,
    Good day. May I ask if anyone experienced this error when trying to access remoteapps in Azure? We are using IaaS and set-up RDS using Windows 2012 R2 but we are getting an error below.
    "Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator.
    Various roles and services (Broker, Session Host, RD Gateway and Web Access are installed on each VMs).
    Please advise.
    Thanks,
    Glenn

    Hi Glen;
    Looks like the set up was not done correctly. Please follow the guidelines given on this
    blog by Keith Mayer.
    Regards;
    Prasant

  • What to do if your iphone is stolen and find my iphone is disabled in your phone. Is there a possible chance to lock my iphone? How? Thanks.

    What to do if your iphone is stolen and find my iphone is disabled in your phone. Is there a possible chance to lock my iphone? How? Thanks.
    Uhm Good day i have a problem because my iphone 5s is stolen Can you give me possible ways to lock my iphone? because find my iphone is disabled in my iphone, my friends keep telling me that i should icloud locked it how could i do that? Thanks
    By the way i have my serial number with me incase you can trace it and locate where my iphone is it could be a great help.
    Thanks

    https://www.apple.com/icloud/find-my-iphone.html
    iCloud: Locate your device
    iCloud: Find My iPhone overview
    If you don't have Find My iPhone  on, you can't lock it. You should report it to your carrier and your carrier might blacklist the phone from use.

  • The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

    I got this problem when I tried to configure out-going email and add an account to farm administrator group.
    I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
    Here are the screen shots.
    The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
    Anyone can help me about it? Thanks.
    Here is the log.
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    8gsf
    High    
    #160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
    characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         General                      
    8kh7 High    
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    7946 Critical
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         Runtime                      
    tkau Unexpected
    Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
    server administrator.    at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message)     at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
        at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
    eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    The e-mail address I have tested it for several times and there is no problem.
    Anyone has any clue about this error?

    Hi.
    This I have seen before...
    It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
    It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
    It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
    If, its the builtin SMTP service you are using, check this link:
    http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
    Check that and try again.
    Regards
    Thomas Balkeståhl - Technical Specialist - SharePoint -
    http://blog.blksthl.com
    Download the SharePoint Branding Project here
    Download the SharePoint 2010 Site Settings Explained here

  • Reg:-10901: Database error: [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)

    Hi Friends,
    When i schedule the report in infoview ,i am getting this error, could you please let me know how to solve this error.
    10901: Database error: [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
    Thanks
    sreedhar

    Hi,
    I am able to refresh the report in Infoview and data is dispalying , but when i schedule the report in infoview i am getting that error.
    I am not clear on below one could you please elaborate on this
    You need to create ODBC for SQL server.Check your BO server is able to connect SQL Server.
    Thanks
    sreedhar

  • I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

    I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

    Which Fx version? When you uninstalled Fx, did you <b>reboot</b> computer before reinstall?
    Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
    Is your profile in the default location or custom location?
    Have you tried creating a <u>new, <b>completely</b> clean profile</u> - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
    Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

  • I try to open hyperlinks in my email (Outlook) but I get this message: "this operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator". I am running Firefox 3.6.6

    I try to open hyperlinks in my email (Outlook) but I get this message: "this operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator". I am running Firefox 3.6.6
    == This happened ==
    Not sure how often

    See http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q310049 You receive an error message when you click a hyperlink in Outlook (default browser)

Maybe you are looking for