Exchange 2010 users cannot open Exchange 2013 shared mailbox

Title says it all.
We're in the process of migrating 1000+ mailboxes to Exchange 2013. A number of shared mailboxes have been migrated, but those users still on 2010 cannot open them.
Is this just how it is, or is there a way around it?

Hi,
I tested in my lab, if the shared mailbox is on Exchange 2010, I could open this shared mailbox successfully. Then I moved this shared mailbox to Exchange 2013, after that, I couldn’t open it anymore, I got the following error:
Besides, I tried to open a shared mailbox on Exchange 2013 which was not moved from Exchange 2010, it is the same error message.
Based on the test, it seems that Exchange 2010 users can’t open shared mailbox on Exchange 2013. So I recommend you move those users to Exchange 2013.
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

  • Outlook 2010 users getting Password Prompt until shared mailboxes are removed

    Hi,
    some (around 20) of my 3000 outlook 2010 users are getting Password Promts while using outlook.
    This started end of last week without any change to the environment.
    The prompt goes away if we unmount and remount additional mailboxes they have mounted.
    Any idea what could be causing this or where to start debugging?
    Backend is Exchange 2013 and 2007 in migration. 
    Thanks for every idea

    Hi,
    How did you mount additional mailboxes? Via File > Account Settings > Account Settings > Double-click the Exchange account > More Settings > Advanced tab > Add?
    Are the additional mailboxes hosted on the same version of Exchange server with thoese mailboxes with the password prompting issue? If this is the case, this issue often happens if you have a hybrid deployment of Exchange Server. To resolve the issue,
    please have a look at the following KB article and follow the instructions to fix it:
    https://support.microsoft.com/kb/2834139?wa=wsignin1.0
    Please let me know the result.
    Reagrds,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Exchange 2010 user cannot change password from OWA

    My users are not able to change their own email password from owa. But we can change the passwords from ECP or from the server without any issue. What could be the issue ?
    Biju Rajan

    Check the regional date and time is set for user OWA...Follow the below steps
    On the Client Access Server (CAS), click Start > Run and type
    regedit.exe and click OK.
    Navigate to HKLM\SYSTEM\CurrentControlSet\Services\MSExchange OWA.
    Right click the MSExchange OWA key and click New >
    DWord (32-bit).
    The DWORD value name is ChangeExpiredPasswordEnabled and set the value to
    1.
    Note: The values accepted are 1 (or any non-zero value) for "Enabled" or 0 or blank / not present for "Disabled"
    After you configure this DWORD value, you must reset IIS. The recommended method to reset IIS is to use
    IISReset /noforce from a command prompt.
    Ref:http://blogs.technet.com/b/exchange/archive/2010/10/06/3411240.aspx
    Exchange Queries

  • Exchange 2010 OWA usage in Exchange 2013

    Hi,
    I have Exchange 2010 with Sp3 Currently running in environment, Now we have plan to Migrate it to Exchange 2013.... Total number of mailbox is around 26000.
    Before Migration we want below things to keep in mind...
    1. We want to Use existing exchange 2010 OWA url ( mail.abc.com ), How to accompolish this as it will take couple of months to migrate all mailbox ?
    2. Can i use my Existing Exchange certificate to get the above goal done ?
    3. What will be the steps and pre-requsite to achieve the Goal ?
    An Early reply would be appreciated !! 
    Amit

    Hi Amit 
    First Change SCP of Exchange 2010 CAS VIP to Exchange 2013 CAS VIP.
    Configure external  DNS records accordingly.DNS entries should be pointed to Exchange 2013 CAS from Exchange 2010 CAS.
    Ensure that you are having a seperate name for CAS array from external ews url
    Outlook Anywhere should be enabled and Url should be external URL which points to Exchange 2013.
    Authentication for OUtlook Anywhere should be - NTLM
    for OWA exchange 2010 - FBA and windows 
    Point your new CAS server to the firewall or TMG . Now from exchange 2013 all request will be proxied to 2010 users 
    You cannot use the same certificate . YOu need to add seperate entries as the host name for new servers will vary
    Apply a new certificate with all the required site names included in Exchange 2013 CAS.
    Whats more you can refer my blog as well 
    http://exchangequery.com/2014/05/02/things-to-consider-before-configuring-autodiscover-in-exchange-20102013-coexistence-scenarios/
    Cheers :)
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

  • Exchange OWA does not load OWA for Exchange 2010 users

    I have recently installed Exchange 2013 SP1 CU4 in my existing Exchange 2010 SP3 environment but when I use Exchange 2013 OWA to login Exchange 2010 users (it should automatically take the user to Exchange 2010 OWA) but I get this error message "Forbidden
    403- Access is denied". However exchange 2010 users can login to their /ecp directory from exchange 2013. Exchange 2010 users can use OWA using their exchange2010/owa URL without any problems. We do not have any http or https redirection enabled
    on any of the server. Also I have tried to uncheck the "Required SSL" settings for default web site on both Exchange servers but error is still same. Any help will be highly appreciated.

    Hi,
    According to your description, your Exchange 2013 cannot proxy OWA request to Exchange 2010 server, but ECP　request　can work properly.
    In this case, Ｉ'd like to confirm OWA and ECP settings on Exchange 2013 and 2010 servers before going further:
    Get-OWAvituraldirectory |fl identify,*url,*authentication
    Get-ECPvituraldirectory |fl identify,*url,*authentication
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange 2003 users are unable to send attachments larger then 8 MB to Exchange 2010 users on the same LAN

    I am migrating from Exchange 2003 to Exchange 2010.
    Users who are still on Exchange 2003 cannot send attachments any larger than around 8MB to Exchange 2010 users on the same LAN.
    Users on Exchange 2010 can send large attachments to fellow Exchange 2010 users without issue.
    I do not have any quota restrictions on Exchange 2010.
    Had a look at the Exchange 2003 Connector but could not see any reference to attachement restrictions.
    Has anyone come across this?

    Here is a note of the NDR:-
    Your message did not reach some or all of the intended recipients.
    Subject:   
    The following recipient(s) cannot be reached:
    Tracey xxxxxx on 01/12/2014 13:27
    This message is larger than the current system limit or the recipient's mailbox is full. 
    Create a shorter message body or remove attachments and try sending it again.
    <mail.xxxxxxxxx.com #5.2.3 smtp;450 5.2.3 Msg Size greater than allowed by Remote Host>

  • 2013 CAS working for 2010 users, certificate error on 2013 users

    Yesterday we decided to pull the trigger on migrating to exchange 2013 from 2010. We changed the autodiscover URI's to mail.domain.com and we also changed the DNS records to as follows:
    mail.domain.com -> 2013 cas
    mailhub1.domain.com -> 2010 cas
    mailhub2.domain.com -> 2013 cas
    Ive pushed every single URL I can find through mail.domain.com. We had a few odd issues but were able to work through them. Now we are about 10 hours into troubleshooting without making any headway. Here is where we currently stand:
    Exchange 2010 User - Works on everything - Web, Mac Mail, Outlook (inside and outside), mobile clients
    Migrated and New Exchange 2013 User - Works on Web, Mac Mail, Mobile. Does not work on outlook inside or out. 
    For outlook we receive the following error:
    Microsoft Outlook
    There is a problem with the proxy server's security certificate.
    The name on the security certificate is invalid or does not match the name of the target site mail.domain.com.
    Outlook is unable to connect to the proxy server. (Error Code 0)
    OK
    ---------------------------The certificate is perfectly fine from what I can tell. The main domain on it is "mail.domain.com" with "autodiscover.", "mailhub1.", "mailhub2.", and "domain.com" in the Subject Alternate Name.What on earth could I be missing here? It works on exchange 2010 but not on 2013 which is the exact opposite of what I was expecting.

    Oooh, Im getting an error now in testconnectivity that wasnt there before so one of the approx. 6000 changes I made must have triggered it! 
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    So I looked at the regirestry of both the old mailhub1 and the new mailhub2. The new one only had 2 entries where as the old one had tons. I copied it over, added mailhub2:6001-6004;mailhub2.domain.com:6001-6004 and did an iisreset and restarted the services.
    The port still isnt open. Do I have to run a command or reboot? I would rather not have to reboot but I understand if I do. Also, am I doing this right? 
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
    The attempt to ping the endpoint failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl06_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details

  • Migrated user cannot open outlook or log into owa

    We are in the middle of an Exchange 2013 migration from 2007 and this is the 2nd time I've encountered this issue.  The migrated user cannot open outlook or log into owa.  The error that is thrown in owa is below.  I cant really find any info
    on this error.  Also, notice the date.  No idea where its getting that.  We've moved about 7000 users and I've seen this on two of them.  I'd appreciate any insight on this.  Thanks.
    X-OWA-Error: SDServerErr;Microsoft.Exchange.UM.UMCommon.InvalidPrincipalException
    X-OWA-Version: 15.0.847.32
    X-FEServer: server01
    X-BEServer: server01.domain.com
    Date: 1/2/1601 2:47:50 PM
    Rich

    Hi,
    Based on my research, the issue can be caused by Duplicate legacyExchangeDN properties. Thus, let’s check it and remove or change it:
    Check if the properties of the two problematic users is same. If it’s same, we can change the value.
    If not, let’s check if there are other users who have the same value with the two users:
    Use LDP.exe to search "legacyexchangedn=/o=…”.
    http://support.microsoft.com/kb/252335
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Exchange 2010 SP3 outlook prompot password for linked mailbox

    Hi All,
    I have forest A and forest B, there is an Exchange 2010 SP3 server in forest A, linked mailboxes are created for user inside forest B. Trust relationship can be verified , in place and active. Suddenly , some linked mailbox user got outlook password prompt
    repeatedly but OWA and Active Sync is still working fine.
    I have reset Exchange Web Services Virtual Directory. but the issue still persists. Please advise
    Regards,
    Zaw
    ZAW

    Step 1: Close Outlook program and create backup of PST file
    Step 2: Now run SCANPST.EXE on copy of your PST and repair
    SCANPST.EXE is found in these locations according to different Outlook versions:
    In MS Outlook 2002/XP: C:\Program Files\Common Files\System\MAPI\ \scanpst.exe
    In MS Outlook 2000:C:\Program Files\Common Files\System\MAPI\ \NT\scanpst.exe
    In MS Outlook 97/98:C:\Program Files\Common Files\Windows Messaging\scanpst.exe
    Note: Do not use backup option in SCANPST.EXE as you working with a duplicate copy of PST 
    file.
    Step 3: Then open the command prompt by clicking Start >> Run
    Step 4: Paste or type the file path to PST19UP and your PST name: PSTUPG19.EXE-filename.pst 
    and press Enter.
    Step 5: The command line will resemble: “C:\My Documents\pst19upg.exe”- Outlook.pst.
    Step 6: A new copy of the PST file will be created, which is called “filename.psx”.
    Step 7: Once you have completed, rename the original PST file.
    Step 8: Now at the Command Prompt, type “pst19upg.exe- filename.psx” and press Enter
    Step 9: A new password-free PST file will be created from PSX file.
    Step 10: Now open your MS Outlook program and open the PST file.

  • Cannot open Office 2013 Excel, Word, PPT Files on Network Share

    Cannot open Office 2013 Excel, Word, PPT Files on Network Share
    I am having a problem opening any Office 2013 file when it is located on a network drive. I immediately get the error:  
    "Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
    . To make more memory available, close workbooks or programs you no longer need.
    . To free disk space, delete files you no longer need from the disk you are saving to."
    It only occurs when I try to access the file when it is stored on a network share. I cannot open any word, excel or PPT files located on my file shares.
    I am on Windows 8 (pro), part of a local domain based on Server 2003, and have administrator rights to the domain and the file share where the Excel file resides (and Word files -same problem). If I copy the file locally, I can either open
    it directly, or right-click, go to Properties and 'un-block' the file and then open it. But it is impractical to keep doing this, as I edit different files from the directory tree all day.
    I have bing'd and google'd this extensively, and the only answers I come up with do not work, such as going into the DCOM config system and changing the user from interactive to launching user, or vice versa, or even using a specific user - mine
    with the password. Since the product is so young there aren't a lot of posts on this, and nothing has improved the situation.
    Can you add any insight to this? I really want to use Office 2013, but this is such an obstacle I'm going to have to downgrade if this problem cannot be resolved. Thank you very much for any help you can offer.
    Evan

    Dear Evan,
    If DCOM config solution did not work, I'd suggest narrow down the problem by trying to access another network share on another server, try to open an Office file there, do we still have the error? It could help us determine if the issue is on the client
    machine or the server side.
    Best regards,
    Daisy Cao
    Forum Support
    Please take a moment to "Mark As Answer" if they help.

  • PC users cannot open my Pages-exported PDF documents

    Has anyone encountered this? When I want to give someone a PDF, I need to export it from Pages, choose "Open with Adobe Reader," and then re-save from Reader as a different name. (If I just export from Pages, some PC users cannot open it.) When I look at the file information for these two supposed PDFs, the one that's only exported from Pages says "Portable Document Format (PDF)" and the one opened and resaved with Reader says "Adobe PDF Document." What's going on here? Is there a reason my PC friends can't open a Pages-generated PDF?

    Thanks for the suggestions. Funny, when I changed the "Open With" selection inside the "File Info" box to tell it to use Reader, it it still tells me in the "General" information section that it's a "Portable Document Format (PDF)", but it does replace the "Preview" icon in the upper left with the Adobe logo. Only the version that I physically opened with Reader and re-saved lists the "Kind" of document as an "Adobe PDF Document". Wacky.
    Regarding the extension, when I exported from Pages, the "Hide Extension" box was unchecked in the "Save" window, yet the file's PDF extension is in fact hidden (and the "File Info" box also says it's hidden). What's up with that? Grr.
    Seems like a small bug--now I just have to get some PC-using friends to let me know which ones they can open! Thanks for your (tres rapide) help guys!

  • Some Users cannot Open Workflow Approval Task

    We have a SPD workflow published to our production site and it includes a 'Start Approval Process' task which involves a number of users (determined by a lookup to another list) this worked brilliantly until we republished the workflow with some minor changes,
    none of which were to this particular approval task. Now we are seeing some strange behaviours. When some users click the task to approve they are seeing 'This from cannot be opened in a browser, To open this form use Microsoft Infopath'. Now strangely it's
    only certain users, if you're a site collection admin you never have this error. So if a user previously had the error and i then add them to the site collection administrators list the error goes away and they can complete the task.
    Obviously not a solution! giving users full control permissions on the task list or task item doesnt fix the error either. The same workflow on our UAT works without any issues. The task forms in SPD have not been customised either. Its a SP2010 Standard
    farm with no infopath services obviously. Bizarrely there are some users with only Contribute rights to the task list who can open approve tasks, so it's looking like a permissions issue to me but I'm at a loss to find a fix. I've tried totally removing
    the worklows and republishing, regenerating the .xsn task forms in SPD by deleting them and republishing, removing and re-adding the task related content types to site, Changing the Approval Task settings 'only allow users to edit their tasks...' to false
    and then back to true, the works, but to no avail.
    Anybody any ideas?
    TIA
    Chris

    Hi,
    According to your post, my understanding is that Some Users cannot Open Workflow Approval Task.
    I recommend that you can create a new list and workflow to check whether it works.
    Then use the user who get the error to open task.
    If he can open the task in the brower, the issue is related to the older list.
    Then you can use the new created list and assgin the task.
    Here is a similar thread for your reference:
    https://social.msdn.microsoft.com/Forums/en-US/67dc8577-f248-4d6c-bb82-3aca0f084d24/this-form-cannot-be-opened-in-a-web-browser-error-not-an-infopath-form?forum=sharepointcustomizationprevious
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • How to retrict user cannot open the same form more than once (Forms 6i)

    Our users always open the same forms more than once. For example the customer form, the user may access a customer record in the first form, however, he will open a new customer form to edit the same record, the result is he cannot save the record because the record is locked in the first customer form.
    How can I control the user cannot open the same form more than 1 time.
    Best Regards,
    Kane

    The customer form is only an example, I found there will cause a lot of problems is I cannot control the user from calling 1 program more than 1 than within application. Sometimes a user (not good in using computer) will overlap the form for many times.....
    Is there any simple way to do that?...can I have some PL/SQL statement or build-in functions that let me easily found our what forms the user has already opened, then I can control whether I let him open this form or not.
    Urgent...please
    Thanks

  • Why the remote user cannot open any folds?

    Why the remote user cannot open any folds?
    I create a user user8 and already grant the user the role connect, OLTP-user, and resource. I also assign this user unlimited space in the user8 tablespace. But after connection, the user8 cannot open any folds and the connection is terninated automaticlly.

    Why the remote user cannot open any folds?I don't know what you have.
    I don't know what you do.
    I don't know what you see.
    It is really, Really, REALLY difficult to fix a problem that can not be seen.
    use COPY & PASTE so we can see what you do & how Oracle responds.
    do as below so we can know complete Oracle version & OS name.
    Post via COPY & PASTE complete results of
    SELECT * from v$version;

  • Windows 7 ffox 1.6.16 installed office 2010 intimated cannot open link outlook firefox default browser, firefox will not initiate at all. Have to restart to get any response from firefox which then works but it crashes again. No error message

    Windows 7, firefox 1.6.16 just installed office 2010, sometimes cannot open a link in outlook and firefox is my default browser, and firefox will not initiate at all. Have to restart computer to get any response which then works but after a while it crashes again. Was this due to an update or office 2010 has a hidden setting somewhere? Why would firefox crash without any message? Intimated consuming

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Maybe you are looking for