Exchange & Push Mail Issues (Inbox only - not other sub-folders)

got everything to work without too many problems.. I did however run into one major problem which seems like a deal killer for me..
I have pre-existing mail sorting rules on my Exchange server.. basically I have a general INBOX with several sub-folders (let's call the CLIENT-A, CLIENT-B, CLIENT-C)..
This means the Inbox looks like:
/inbox/
/inbox/client-a/
/inbox/client-b/
/inbox/client-c/
My problem is that since the mail is being pre-sorted at the mail sever directly into the sub folders, I am not seeing the NEW mail (or related marker on Mail App icon) except when it get mail that goes in the INBOX.. only email that ends up in INBOX get PUSHed.. mail that is routed to CLIENT-A or CLIENT-B requires me to manually click on their respective folders to have Mail App PULL the mail in..
Am I missing something? Can this be resolved?
Message was edited by: Verde Capucho
Message was edited by: Verde Capucho

yeah - this is a huge problem for my work flow.. I have been using a blackberry since 9/2001 and finding this out really stops me dead in my tracks from having myself and my employees switch to iPhones..
I really hope Steve can get the engineering folks to spend some cycles on this.. PUSH should aply to all folders, not just the inbox...
Message was edited by: Verde Capucho

Similar Messages

  • Exchange Push Mail Issues

    For the past couple of weeks I've been having issues with my device and push mail, I'll check the phone in the afternoon and it'll say last updated 10:30 - swipe to update and all my mail comes in. The device is not in Stamina mode and I've even disabled the "queue background data" option but not joy. Removed and re-added my account also, oh and cleared out all of my devices in Exchange web mail. Just downloaded TouchDown to see if its the native email application causing the issue and that works fine. I am wondering if the last software update has caused an issue, been working fine up until a few weeks ago. My father has a Moto G running off the same email service and its fine.

     I had this issue and I resolved it with a widget I use (PowerToggle) as I use it for my quick access tools eg Vibrate to Loud, Torch on/off, brightness etc, and I put an auto-sync on there and leave it turned on. Not an exact fix but it works. I found before I did this that apps would turn off their auto-sync, and turning it on manually would work until I reset the phone, then it'd turn off again and would have to turn on again.  

  • Exchange, Push Mail and traffic questions

    Hey there,
    I've been using Gmail set up as ManagedExchange on my iPhone for a while now, mainly to achieve push mail (the
    iCloud push mail was cancelled in Germany for some time due to a patent argument with Motorola, which made me look out for alternatives).
    Since iOS7, users can see how much traffic system services  use (Settings->Celluar->System Services). There's an
    entry for "Exchange Accounts" and it shows quite some traffic in my case. The entry for push is quite low (as you
    would expect, since it's only a matter of bytes for each message).
    Here's where I started wondering: Say you use ManagedExchange for email to get Gmail to push (stock mail app). Where will the traffic that is caused by that account be listed? Under "Mail.app" or under "Exchange Accounts" in
    the "System Services" pane? Or will the "Mail.app" entry include most of the traffic that "Exchange Accounts" shows
    (which is not the case for me)?
    The next thing I'm asking myself is how the push notifications for Exchange accounts work. Are they still
    centralized via the apple push servers or does the Mail.app contact the Exchange server directly? If so, I think
    this could cause more battery consumption and traffic than a standard push mail service (via Apple).
    If this is the case, I think I'll switch back to iCloud (push is working again in Germany) and ditch the whole Exchange thing.
    Any input on this subject is greatly appreciated.
    Thanks!

    I did the following:
    1. Access OWA (https://your_domain/owa (could be something else but this is default)) via FireFox 3 (must be FireFox 3 to export the cert)
    2. Click on the 'fav' icon next to the URL. This will popup a window with information about the site you are visiting.
    3. Click on 'More information...'
    4. Go to the 'Security' tab.
    5. Click on 'View Certificate'
    6. Go to the 'Details' tab.
    7. Click on your exchange server's certificate.
    8. Click 'Export...'
    9. Save to desktop (or wherever) with .PEM extension
    10. Email that certificate to an account that you can access on your iPhone.
    Follow the rest of the info in this thread. You should be all set. Push has been working well for me ever since I found this thread. The only issue is my battery life has significantly diminished. So much so, that I may turn off push after all. Hope you don't have the same issues. Good luck!

  • Can send or receive e-mail on exchange e-mail in 3g, but not wireless

    Hello,
    At work, i have an exchange e-mail which is using "Active Sync" so that I can connect my e-mail, contacts, calendar, etc on my iphone.  I have the settings set to push and fetch my data automatically (i know it uses more of the battery too).
    Everything was working for the past 3 months until just a few days ago where I cannot send or receive my e-mail unless i come off of the wifi settings.  3g works, but not wifi...when I am on wifi, I can get the internet on my phone just fine, just not my exchange e-mail (cannot send either).  It takes like up to 20 minutes to receive an e-mail on wireless, but on 3g it is almost instant.
    HELP?
    thank you very much

    Am in Olympia WA for the holiday - I live in San Diego - I agree started two days ago. I spent 3 hours with Apple Support - they conferenced in ATT and they were no help. Eventually - I did a restore and did not change a thing. Am using 1.1.2.
    Something happened late monday as it was fine sat - mon night. Since I do not live in WA - I assume things will be OK when I return to CA. Giving ATT a call might help - but you will definately need to get it escalated to a higher level.
    I have sent this forum link to the great apple T3 support person that spent so much time with me - hopefully he will forward on to ATT and it will get resolved for all of you. Something did change on Monday night.

  • Exchange 2007 Mail issue, server rejecting password

    Hi all.
    We have installed Exchange 2007 server today and configured it and all windows clients and iPhones. windows clients on normal RPC settings and laptops on RPC over HTTP.
    Webmail has also been configured which works fine with a trusted root certificate. webmail works fine in safari also.
    we have a problem configuring Mail on two SL macbooks. when running the setup and entering the password the client app comes back repeatedly and says 'The Exchange 2007 server “exchange.domain.co.uk” rejected the password for user “username” '
    i have tried this on both machines and im kind of stuck since the exchange server is fully function for all other devices.
    For info, the exchange server is on SP1 rollup 9. running on windows server 2008 R2 x64
    i changed the outgoing server field to be the internal IP just to check and i get the prompt for the SSL (obviously since the SSL does not include the IP. i click to import and accept which it does but i still get my password rejected.
    Any ideas?

    Seems like an issue with a December update. I found the following info that basically tells you to go to IIS SSL settings for the OWA (and related sites) and change the client to "accept certificate". It worked for me so hopefully this will help someone else.
    The following text was found on:
    http://social.technet.microsoft.com/Forums/en/exchangesvrgeneral/thread/383d130e -869f-4fce-9502-8b340904b0ba
    EDIT: Found a fix for me potentially via - http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploy/thread/c1e72d 2a-d360-4ff0-b2f5-1a9ae149df18 and http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=micro soft.public.exchange.admin&mid=00d4a681-f588-4eed-b4f8-5c3645e7376c&sloc=en-us
    I had an issue similar to this. Win2k3 Ex07. All of my Outlook 2007
    users were getting prompted over and over for the username and
    password. It wasn't checking the certificate that they had installed
    via internet explorer. To fix the problem, I opened IIS on the
    Exchange server and checked the following directories under the
    default website (the root site(default web site), oab, autodiscover).
    Under the directory security tab, click Edit in the Secure
    Communications section. I had the require SSL checked and the 128bit
    encryption, but under Client Certificates, it was set to ignore. Once
    I changed that to Accept for each of the folders, stopped and started
    IIS, I stopped being prompted all the time for credentials. Hopefully
    this will help someone in the future.
    Just confirmed fixed for client!!!
    -IL

  • Exchange and mail issue on lion

    I use a 27inch iMac with exchange for the company email. If I ever search for an email in mail I can usually find what I am looking for but after that Mail freezes. I then have to force quit to restart mail. It's not an issues on the iPhone. Help?
    Any thoughts on what is happening or alternative solutions.
    I am running lion.

    It's a bit more involved than one would hope.  If you do decide to move it, I'd use Method #1 here.
    http://support.apple.com/kb/HT4967?viewlocale=en_US&locale=en_US
    I assume your assistant sees you calendars becuase they are using your iCloud account?
    Matt

  • Yahoo! Push Mail stopped working (does not Push anymore!)

    Hey,
    I have my iPhone 3G for about a month now. And before you ask, I did not Jailbreak it or whatsoever.
    Push Mail via Yahoo! worked fine for me for about 2 weeks and after than eMails stopped getting pushed to my device. I tried deleting and re-adding my account, but still, nothing gets Pushed.
    I checked all my settings and they are all fine (afterall why should they not be, I never changed anything in the first place!), everything is set to "Push".
    This is really annoying me, because I wont get my eMails unless I go into the Mail App and press the "Refresh" button.

    Same here, was working fine until a couple of weeks ago and then stopped. Only updates now when in the Mail App.
    Ad

  • Exchange email only, not other info

    I am on my local city council and they have an email address setup for me on their exchange server.  I want to retrieve email from it but not sync my contacts or calendar events.  I want to continue to do a normal sync with my work computer.  Is this possible?  If so, how do I do it?
    Post relates to: Palm TX

    Hello!
    Unfortunately it is a locked deal with the PalmOS devices using the Exchange ActiveSync services.  The Exchange ActiveSync service will blocked out hotsync from accessing the Calendar/Contacts weather if you use it or not .  Windows Mobile devices like our Treo Pro are able to do both with no limits, pending the security policies on your exchange server.

  • I can not delete mail the inbox, only apparent deletion

    More than one mailbox to the thunderbird (ver. 24.5.0). The default growing inbox. When I delete one or more letters of the inbox file size does not change. If I delete all of them, even! The "folder repair" will not fix the problem. The "Deleted messages" are not shown, but are included in the file inbox!
    (sorry for my bad english)

    Magyarul is:
    Több postafiókot kezel a Thunderbird (ver. 24.5). Az alapértelmezett fiók mérete folyamatosan nő. Amikor törlök belőle egy vagy több levelet az inbox fájl mérete nem változik meg. Ha az összeset kitörlöm akkor sem. A törölt leveleket nem jeleníti meg, de azok az inbox fájlban benne vannak.
    Ahogy nő a mérete, egyszer csak eléri a 4 GB korlátot - annak ellenére, hogy törölve vannak a levelek (op. Win7, 32 bit).

  • Setting up Mail to send only (not receive)

    Hello all,
    I currently use Mail to send/receive to/from my Gmail account, and Entourage for my work (MS Exchange).
    I want to use iWork 09 and the functionality of sharing documents using iWork.com.
    The email addresses that iWork uses (for notifications to someone you want to share a document with) comes from Mail. So if you have multiple accounts on Mail, you can choose which one the email will appear from.
    Obviously for work documents, the emails need to come from my work email, not my personal Gmail address.
    So is there a way to set up an account (using POP3 or IMAP) so that it ONLY sends, and does not receive email?
    It is straightforward to set up a fully functional POP3 or IMAP account for my work email using Mail, but with over 2GB of mail on my Exchange account, I don't want to duplicate my whole Entourage emails...
    Thus my need to be able to _send only_....
    Any pointers appreciated.

    Hey Steven,
    Sorry for digging back in the archives for this one, but a while ago you solved the problem of a missing iCal alarm clock with the following solution...
    Thank you. This has been bugging me for far too long, but you finally made me look to see what was wrong. Here's what I did that has fixed it on my machine.
    (I probably should have quit iCal first, but forgot.)
    1) Navigate to iCal in your Applications folder.
    2) CTRL-Click on the iCal icon in the Applications folder.
    3) Select Show Package Contents
    4) Double click on the Contents folder
    5) Double Click on the Resources folder
    6) Double click on the icon for alarmclock.mov
    A dialog box came up telling me that the movie requires Adobe Flash to play, which is disabled in QuickTime, and allowed me to enable it. I also had to select 'apply to all movies'
    7) Start iCal and test it. I had to restart iCal a couple of times, but that's probably related to my not remembering to quit the application before I started messing with its guts, and my failure to apply the change to all QuickTime movies.
    Good luck
    srb
    Well I tried this without success... QuickTime opens alarmclock.mov, but it's still just a black square. Hope you may be able to help on this one... again!
    Cheers!

  • IPhone and Cox e-mail issues -- sender address not valid?

    I have had an iPhone for several years and have never had a problem with e-mail and Cox internet. However, I transferred my service this week to a new address - same account information - and now my e-mail is not working correctly. Cox told me to reset my password via Webmail, and I did. I also followed the information here as to the correct set up for mail accounts. I can now receive e-mail,but I can't send e-mail. I receive the message - the sender address was invalid- and my outbox is full of unsent messages. I have everything in place according to the online articles posted here and on the Cox site. Can anyone help me correct this issue? Thanks!

    What are you using for an SMTP server?
    Go to Settings, Mail Contacts Calendar, Your mail account, Account Info, Advanced and look for Outgoing Mail Server.
    If Cox does not permit AUTH-SMTP, set it to AT&T's mail server. Even if Cox does permit AUTH-SMTP, try using the AT&T mail server.
    If that doesn't work, try resetting the phone.

  • Exchange e-mail issues and iPhone 4s

    When I send or reply to a message from the iPhone it automatically saves the sent message on my exchange server – this is very annoying as I only ever save messages I need responses to – can this be stopped?

    Welcome To  Discussions pattylo!
    I suggest that you also post in the Leopard 10.5 Mail & Address Book Forum.
    ali b

  • Saleable item specific to one Customer only, not other customers

    Hi All
    not sure if i'm in the right area, but does anyone know how a saleable finished good item can be controlled / marked as saleable to a specific single Customer only
    That is, no other customers may order the part due to Patent / Copyright reasons
    Its produced, and sits on the shelf for that single customer
    We understand and use Customer Material Determination, but want something preventing other customers from ordering
    any thoughts are much appreciated
    regards

    Hi,
    This can be controlled by "Listing/Exclusion" method of SD Basic Function.
    Listing/Exclusion: - In this menu option, you define rules according to which material listing or material exclusion functions in sales processing. With material listing or exclusion you can control which materials can be sold to each customer. Material listing lists which materials a customer can buy. Material exclusion lists which materials a customer cannot buy.
    Example: - A material listing is created for a customer. The customer can only buy the materials contained in the list. The system does not allow any materials to be entered if they are not contained in the material listing.
    To configure the same go to following path;
    SPRO > Sales and Distribution > Basic Functions > Listing/Exclusion - Here perform following steps as per the requirement;
    - Activate listing/exclusion by sales document type
    - Maintain listing/exclusion types
    - Procedures for maintaining listing/exclusion
    - Maintain access sequences for listing/exclusion
    - Maintain allowed fields for listing/exclusion
    - Maintain condition tables for listing/exclusion
    Then maintain condition record for Listing/Exclusion in T-Code VB01.
    Also refer following links;
    [Material Listing/Exclusion in SAP SD - User Guide|http://www.slideshare.net/magnatraining/maerial-listing-and-exclusion-in-sap-sd]
    [Material Listing/Exclusion in SAP SD - Config|http://www.sapfunctional.com/SD/Listing/Material.htm]

  • Mail issue - inbox displaying number 4294967294 - anyone know why or how to fix?

    On my iphone 4S my email inbox is displaying this number "4294967294" next to it this morning and I have no idea why.
    Does anybody know the cause, and/or a solution?
    Thanks.

    Don't know, maybe the developer oversight.
    Check out their forum and see if that happened to someone else.

  • Original Titanium HD driver CD US version ONLY, not other cards----ISO download link

    For all Windows 8 users:
    This is the ORIGINAL ISO image of the Titanium HD driver CD.
    MegaShare may cut this off if it gets hammered, do not download it if you have your disc already.
    This is the North America/US version.
    http://d01.megashares.com/dl/WoLve76/SB_INSTALL.iso
    I recommend you use this with the new Titanium HD Windows 8 driver. Install the new Windows 8 driver first, change no settings, reboot. Next, install the CD. Do a custom installation, and uncheck the driver and Dolby/DTS Connect packs on the CD's menu. Reboot again and you should be good to go........
    Analog and digital sound works perfectly for me under Windows 8 64 bit edition. I did install the newest Console Launcher as well under Windows 7 compatibility mode.
    Creative updated its recent driver to include standalone DTS/Dolby support so you want to make sure that you do not install the older versions included on the CD ISO.

    Problem solved. The uninstall worked in Safe mode.

Maybe you are looking for