Exchange rate fetched while calculating depreciation is historical rate

Hello All,
Following is the issue:
As part of depreciation process, SAP posts amount in local and group currency. SAP while converting local currency depreciation value into group currency (USD) isnu2019t able to pick up right foreign currency rate i.e average rate for that month. Instead SAP chooses historical exchange rate which existed at the time of capitalization and converts the depreciation value.
Exchange rates for both historical and average are maintained in OB08.
I would like to know whether any more configuration is required or should i do a debug and understand why historical rate is fetched instead of Average rate
Appreciate an early reply
Best regards,
Sundar

Hello Srinu,
Does ECC 6.0 allows any tweaking in configuration or in the depreciation program to fetch average exchange rate for depreciation?
Appreciate your time!
Regards,
Sundar

Similar Messages

How salvage value will be treated while calculating the depreciation

Hi,
while calculating depreciation how salvage value will be treated depreciable base?
Thanks & Regards
Sap Guru

If APC value is 10000 and salvage Value is 500 then the depreciation will be calculated as net of these two values and calcluates the depreciation.
| am not able to understand the your doubt correctly.
sarma

Translating equity at the historic rate (BPC 7.5 NW)

Hello,
For group reporting purposes, our accounting policy is to state our consolidated equity at historic rates. That means that net assets of all subsidiaries are translated to GBP at the closing rate and the income statememt of all non-GBP subsidiaries are translated at the yearly average rate. The equity for all non-GBP is not re-translated but the difference between the equity at the closing rate and the equity at the historic rate is posted to FCTR in reserves.
Anyone has any idea how to implement this in BPC?
Thank you.

Hello,
Thanks for your response. I would really appreciate if you could expand on your comment above, as the rule needs to do several things:
-The opening balance of equity (in any particular BPC account code) needs to be at the previous period's closing rate.
-The movement during the period in the account needs to be at the average rate.
-FCTR needs to be calculated, which is the difference between the LC at closing rate, less the amounts mentioned above. But the FX will be posted to a different account.
Thank you very much again.

Period Rate & Historical Rate?

Dear all,
1) To define "Period Rate" is for translation purpose, am I right?
2) I define a new responsibility for a company only allow them to entering GL, if I need to performing translation, I need to enter historical rates only for owner’s equity accounts ( I mean the balance) only for the first month, no need afterwards?
Please advice,
Amy

Dear Jogendra,
I have followings question from your reply:
1) Why the historical rates should be defined for all
the periods if it is different in different periods?When we run translation,historical rate defined for code combinations looks for immediate period in which the rate is defined.So,if the historical rates are not same from one period to another due to business reason and the rates are not defined in the immediately preceding period then the code combination would look for earliest period available for translation.So,we should define for all the period.
>
2) What is your meaning of "Other rates defined for a
code combination"? What rates I need to define in
code combination?Other rates means period rates defined for a period for all the code combinations other than owner's equity accounts.
Except in case of historical rates for owner's equity,there is no need to defined any rate for each code combination.
Best Regards,
Amy

Exchange rate difference while cancellation

All,
I have done MIGO for Imported items .
Accounting entries generated .
Suppose Exchange rate is 1 EUR = 5 EGP
Suppose it is dr : 100 EUR (stock)
                    Cr: 90 EUR (GR-IR)
            PPV Cr : 10 EUR
While doing the MIGO Cancellation for same document ( 102 Mvt type ) ,
Accounting entries reversed ,
but coming as different .
        Cr : 99 EUR
        Dr : 90 EUR
PPV Dr : 9   EUR
But while displaying in Local currency , entries while MIGO and also for reverse are absolutely same .
How this is happening ?
Kindly advise.
regards

Hi,
You cannot make the default setting for exchange rate fix in PO. When you make the ex.rate fix you need to enter the exchange rate in the adjacent field. This rate value may be as per the billing of ladding date or Letter of indent date depending on your business.Therefore in case of import PO please check /change the rate and fix it before making the GR.
regards
anbumani

Calculation of Depreciation on pro rata basis

Hi,
i had posted aquistion of asset on 1.1.2008. and a subsquent asset aquisition on 1.4.2008 the system is calculation depreciation for the new aquisition from 1.4.2008 but the depreciation calculated is for the full year i.e. the date of original capitalization of the asset.
Can any one suggest a solution so that the system calculates the depreciation from 1.4.2008 and not from 1.1.2008.
Thanks & Regards,
Praveen.

Hi Ramesh,
i did try the period control, this only controls the start date for calculation of depreciation. The system calculates depreciation from the date of original capitalization date and not the susequent acquisitions date, and it posts from the start date mentioned in period control.
Regards,
Praveen.

Historical Rates for Non Leading Ledgers.

HI Team,
We are using ECC 6.0 and we have New GL & parallel ledgers in our system. We are facing some issues while running Depreciation.
For Company code (CC is XXXX and currency is CHF and Group Currency is USD) we are using 01 (Book Depreciation) and 15 Tax deprecation for XX ledger (Non Leading Ledger) with 3 (area post Depreciation only).
While running the Depreciation for Dep. Area 01 it is taking the Historical Exchange rates posting Dep in group currency but whereas Dep 15 is taking the current day exchange rates due to that we are getting balance when comparing the OL ledger with XX Non leading ledger.
Can you please check and let us know how system can consider the Historical Exchanges rates for Non leading ledgers
Thanks
DB

HI Hugo Segovia,
Thanks for your response.
The below chat is the current configuration in our system
Dep.Area     Name Of the Dep.Area                     Real Dep Area                    Posting to G/L                        Target Ledger Group
1     Book Depreciation                 Yes                                    1.Area Post in Real Time                Leading Ledger XX
15     Tax Dep Area                  Yes                                  3.Area Post Depreciation only    Non Leading Ledger XY
32                 Book Depreciation in Group Currency     Yes     0.Area Does Not post
As per your suggestion I have to modify the Dep.Area 32 from Area does not post to Area post in Depreciation area and I should assign Non Lading ledger XY to Dep.Area 32.
In this case the amount which is posted in Non leading ledger will be duplicate as it will be posted as per Dep .Area 15 and Dep.Area 32 also. How can I control this?
Thanks in advance for your help.
Thanks
DB

Error while calculating the net present value

Dear experts,
Please help me in solving the following error.
I am trying to do project vaibility analysis through pre investment analysis in appropriation request, interm I'm trying to calculate the IRR for the project.
I have created the appropriation request and given all the data in that including the planed values for the project.
In Variants tab of appropriation request, preinv. analysis sub tab, i have clicked the button Calculate preinvestment analysis figures , ( I hvae not mentioned any values in that screen, its picking the plan cost from the planed values of the appropriation request) there I'm getting an error saying
Error while calculating the net present value
If I open the message it is as follows:
Error while calculating the net present value*
*Message no. AO215*
Diagnosis
An error occurred during calculation of the net present value.
The yield curve for determining the net present value is not completely maintained. Possible causes are:
1. Evaluation type IM01 does not exist (table ATSYC).
2. Yield curve types 9990 (bid) and 9991 (ask) have not been created (table JBD14) for the currency of the controlling area of the appropriation request.
3. Reference interest rates have not been created for the yield curves (tables T056R and JBD15).
4. Interest rates are not maintained for the complete planning time period for the reference interest rates.
5. Under certain circumstances, the standard exchange rate types 'G' and 'B' may be inconsistent.
Procedure
Check your Customizing settings:
1. SAP supplies the evaluation types.
Remember, SAP supplies the evaluation types in client 000. You have to copy them into your working clients. If you do not have them in your system, you can create them in Customizing for the Treasury component (Treasury Management -> Market Risk Management -> Evaluations -> Define Default Settings). Create evaluation type IM01 with bid yield curve type 9990 and ask yield curve type 9991.
2. In Customizing for appropriation requests (under Planning), create a bid yield curve type 9990 and an ask yield curve type for the currency of the controlling area of the appropriation request.
3. Create at least one reference interest rate for each yield curve.
4. Maintain the reference rates, starting at the minimum fron the point at which you you have planned costs or revenue.
5. Check Customizing of the exchange rate types 'G' and 'B' in the IMG under Global Settings -> Currencies.
I have checked all the procedures of the said customization and the values are similar to that of the error message, but still I'm unable to proceed further.
I have goe through the note 160375, but did not succeed on this issue.
Can any one help me out in solving the above error and also can any one explain me the process in SAP to calculate IRR?
Is there any more customization missing or whats wrong going in that process?
Please help me out...
Thanks in advance..
Regards,
Praveen.

Are you installing a Demo version of NetWeaver? If so please post your questions and search for answers here: SAP NetWeaver Application Server
If this a real full blown system please contact the OSS, via the Marketplace (service.sap.com) or by OSS transaction in your SAP System.

Translating ACCOUNT at Historical Rate

Hi all,
Can someone please help because there does not seem to be anything in the documentation regarding this or I must be missing it?
I have several ACCOUNTs that need to be translated at historical rates. In other words, users will enter the Local Currency amounts and the corresponding Translated Currency amounts for these ACCOUNTs in an input template. However, the translated currency amounts get re-translated at some other exchange rates when I run the FX Restatement package.
I need to tell the application to ignore re-translating the translated currency amounts for these certain ACCOUNTs and just leave the translated currency amounts entered by the users alone as they are. Can this be done in SAP BPC?
Thank you.
Regards.

Hi Joost,
Thanks for the tips.
I suppose that the values I specify in the dimension prompts in FX Restatement SSIS package will define or delimit the scope that the stored proc SPRUNCONVERSION will process, in terms of which dimension members to process.
If you don't mind, just a few more things to cement my understanding.
Is the parameters list for SPCONVERSION fixed in terms of the dimension types I can pass into the stored proc? Also, must I specify the dimesions in a particular order (e.g. can %CATEGORY_SET% be placed before %APP%) or can I enter any parameters in any order that I like? Does this also hold true for all other stored procedures? Is there any official documentation on this?
Secondly, the FX Restatement SSIS package asks users to select the value of 3 dimensions: CATEGORY, ENTITY and TIME, which I select using a drop down list. I guess other dimensions not specifically asked for will be taken from the Current View settings.
However, the SPRUNCONVERSION is written as:
*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','','GLOBAL','%SCOPETABLE%','%LOGTABLE%')
In contrast to the FX Restatement SSIS package, the member for TIME and ENTITY is not specifically fed into SPRUNCONVERSION. May I know how I should reconcile this or should I not be bothering about this in the first place?
Thank you very much.
Regards.

Journals: managing flows and historic rate differences

Hello,
We are using BPC for a Statutory Consolidation project and need your help on journals:
We have two dimensions for accounts:
accountp for balance sheet and profit and loss accounts
accoutl for flows of the balance sheet (like opening, increase, decrise.. closing)
- question 1
There's a relationship between accountp and accountl,
for instance accountp "#ACC1" should just be related to accountl "#OPE", "#VAR", "#CLO"
Anyway the journal displays in correspondence of "#ACC1" all the possible accountl. Can we limit the view to just the right flows in some way?
- question 2
Some of the journal we are posting involve equity accounts. These journals need to be translated at a "forced" exchange rate, not at the ending exchange rate. is it possible to force exchange rates in journals?
Thank you for your precious help,
Giosuè

I donot think so that this is possible that exchange rate can be calculated as per document date.
To full fill this, you can make entry of vendor's invoice date as posting date.
rgd

Plannned Delivery time not considered while calculating delivery date

Hi PP Gurus,
We have a situation is that after MRP run system is not taking into account planned delivery time while calculating delivery dates in schedule lines
It is taking into account GR processing time.We have GR processing time of 3 days.requirment date is 13.10.2011 & delivery date created by the system is 10.10.2011.
We have maintained correct master data i.e.Materail Master , Info record & Scheduling agreement.
Please advice why it is happening & what is the significance of planned delivery time in externaly procured materail with scheduling agrement schedule lines?
Thanks & Regards,
Sandesh

Hi Sandesh,
Is this happening for particular materials or for all materials
Couple of checks -
1) Check with material master changes, might be after MRP run PDT is updated in material master etc ..
2) Check in OPPQ, for option external procurement , whether scheduling info records/agree is marked or not
Best Regards
K.Madhu Kumar

Excise Invoice:difference in duty calculation while calculating ECS& SECS

Hi All,
There is a difference in duty calculations in excise Invoice, (1) which is generated automatically while creating billing doc manually ) & (2) generating billing doc & excise invoice in PRG.In PRG Billing doc is getting generated by BAPI 'BAPI_BILLINGDOC_CREATEMULTIPLE" and Excise invoice by BDC for t-code J1IIN.
What is the difference?
While calculating ECS duty & SECS duty , AED amt should be excluded. Accordingly billing document pricing procedure was set and was working properly in both the above cases(1),(2).
But standard Excise Invoice tax procedure TAXINN,which is assgined for Excise Invoice there is difference in calculations manually & by PRG using BDC
Thanks in advance
Rayudu

Hi Mahendra,
I understand that while you are trying to post an Export invoice, you need to print excise invoice which is a legal requirement. But, in SAP the same should not be posted in any of the excise tables. I think there should be a small settings from SD side to restrict generating any accounting documents for the Export Excise Invoice. Can you please speak to the SD consultant.
Hope this helps.
Vikas.

Error while doing depreciation forecast

Hi,
While doing depreciation forecast in S_ALR_87012026 we are getting error -
"Fiscal year change not yet made for company code LTIC"
Same error is given while checking asset balances via S_ALR_87011963 .

Hi,
If you don't want or cannot close the current fiscal year yet, please check if maybe you have the previous fiscal year still opened, too.
It is required to do the fiscal year change in order to be able to run the mentioned reports in a new fiscal year. However, since in asset accounting only 2 years can be open at any one time you should check for example if maybe your last fiscal year is 2001 and therefore you would need to close fiscal year 2002 first using RAJABS00 and then open fiscal year 2004 using report RAJAWE00. If this rule (2 years open in AA only) is taken into account, you sould have no problems to do the fiscal year change and running reports in the new fiscal year should work.
You can check your last closed fiscal year in table T093B-ABGJA.
You still can continue working in your previous fiscal year, the report RAJAWE00 is only a technical step and updates the table T093C-LGJAHR with the new fiscal year. For each asset, which is active, a new entry for each depreciation area in ANLC will be generated and ANLB-LGJAN is set to the new fiscal year. But the system only allows this step, when no more than one previous fiscal year is opened (eg. 2003 is the only open fiscal year, so 2004 can be opened now).
Please assign points if it useful.
Regards
Ravinagh Boni

Lost the Ability to get Exchange E-Mail while on WiFi at home only

After 2 months of use, my iPhone 5S started doing something very odd last week and still does today. This is all about using my exchange email at home on my (BT) Wi-Fi
No email on my Exchange email with errors of can’t connect to server and no email.
But I can still receive my normal BT personal email.
After a bit of trouble shooting and deleting my exchange account twice already,
I found the following:
I can receive BT email while at home ( BT) WiFi
I can surf the Web while on WiFi at home
I can send and receive when I turn Wi-Fi off when I am at home ( but it’s slower of course)
I can perform any action except receive my Exchange e-mail while on WiFi at home.
I can also get my Exchange email perfectly well when I go to the REGUS offices and use their WiFi.
I can NOT send or receive exchange email while on Wi-Fi at home but I can if I turn off WiFi (so I know it isn't a password issue or exchange). My home Wi-Fi is the top grade and very fast.
NOTHING has changed on my WiFi. NOTHING has changed on either device. I have the latest iOD update which
I have rebooted my WiFi to no avail.
I think I have hit everything.....
I have called Apple twice ( 70 mins) and they blamed BT
I called BT ( 50 mins) and they blamed my exchange host 1and1
I called 1and1 ( 35 mins ) and they said that it works everywhere else and my settings are fine and it must be an APPLE issue. Can someone please help me as I never had these issues with my great Blackberry for 15 years?
I will also mail this to BT and 1and1.
Thanks
Steve
PS. I did log into THE CLOUD last week though and did a back up on my PC, that's all.

Thanks for the advice.
My settings are as above and my domain is blank as it is optional
The server is forwarded as an existing email with 1and1 hence has a different server setting
[email protected]
As it happens my email suddenly started to work again on my home wifi
Very strange but no doubt it will stop again. The only thing I did was log my iPhone back onto Cloud on my PC.
Maybe that did something?
Thanks

Java.sql.SQLException: while calculating row count: Unexpected exception :

I am working with JDBC that is connected to MS Access 2003 file.
I wrote and tested in MS Access following query and all it is working well. If I write this query and execute it is working well.
pstm = DBConnect.prepareStatement(
"SELECT Parameter.Name, Parameter.id FROM " +
"(ParameterGroupMember INNER JOIN ApplicationReadsParameter ON " +
"ParameterGroupMember.Member_Parameter_id = ApplicationReadsParameter.Parameter_id)" +
"INNER JOIN Parameter ON ApplicationReadsParameter.Parameter_id = Parameter.id " +
"WHERE (ParameterGroupMember.Group_Parameter_id=40) " +
"UNION ALL SELECT Parameter.Name, Parameter.id FROM " +
"Parameter INNER JOIN ApplicationReadsParameter ON " +
"ApplicationReadsParameter.Parameter_id=Parameter.id WHERE (Parameter.id=40); ");
rs = pstm.executeQuery();
When I use code, that sets parameters in the statement it is firing following exception
java.sql.SQLException: while calculating row count: Unexpected exception : 1
at sun.jdbc.odbc.JdbcOdbcResultSet.parameterQuery(JdbcOdbcResultSet.java:6417)
at sun.jdbc.odbc.JdbcOdbcResultSet.calculateRowCount(JdbcOdbcResultSet.java:6336)
at sun.jdbc.odbc.JdbcOdbcResultSet.initialize(JdbcOdbcResultSet.java:155)
at sun.jdbc.odbc.JdbcOdbcStatement.getResultSet(JdbcOdbcStatement.java:424)
at sun.jdbc.odbc.JdbcOdbcPreparedStatement.executeQuery(JdbcOdbcPreparedStatement.java:93)
pstm = DBConnect.prepareStatement(
"SELECT Parameter.Name, Parameter.id FROM " +
"(ParameterGroupMember INNER JOIN ApplicationReadsParameter ON " +
"ParameterGroupMember.Member_Parameter_id = ApplicationReadsParameter.Parameter_id)" +
"INNER JOIN Parameter ON ApplicationReadsParameter.Parameter_id = Parameter.id " +
"WHERE (ParameterGroupMember.Group_Parameter_id=?) " +
"UNION ALL SELECT Parameter.Name, Parameter.id FROM " +
"Parameter INNER JOIN ApplicationReadsParameter ON " +
"ApplicationReadsParameter.Parameter_id=Parameter.id WHERE (Parameter.id=?); ");
pstm.setInt(1, 40);
pstm.setInt(2, 40);
rs = pstm.executeQuery();
Further I found that the problem is with the setting of the second parameter in the statement. Is there different way how to set the second parameter if union is used?
Thanks and regards,
Jan

Jan.Hv wrote:
I am working with JDBC that is connected to MS Access 2003 file.
Use code tags when you post code.
I wrote and tested in MS Access following query and all it is working well. You mean it works in MS Access. Not that it works in java.
>
pstm = DBConnect.prepareStatement(
"SELECT Parameter.Name, Parameter.id FROM " +
"(ParameterGroupMember INNER JOIN ApplicationReadsParameter ON " +I STRONGLY suggest that rather than putting spaces at the end of each part put it at the beginning. It makes it much easier to get it right.
I also suggest formatting the code. There are various ways.
        // Wrong
        String sql = "select x, y z "
                         + "from table1 t1, idtable idt"
                         + "where t1.tim=idt.tim "
                         + "and t1.book = idt.book";
        // Right (spaces) - one way to format
        String sql = "select"
                         + "         x, y z"
                         + " from table1 t1, idtable idt"
                         + " where"
                         + "          t1.tim=idt.tim"
                         + "          and t1.book = idt.book";Your code is in fact missing a space. No idea if that is a problem or not.
Remove the semicolon from the end.
PRINT the sql before you use it, copy/paste and use that string in MS Access (replace the ?) to see if it work.
Further I found that the problem is with the setting of the second parameter in the statement. Is there different way how to set the second parameter if union is used?The MS Access ODBC driver isn't really great for actually reporting errors correctly. So usually any error means something is wrong and it is up to you to figure out the exact problem.

Exchange rate fetched while calculating depreciation is historical rate

Similar Messages

Maybe you are looking for