Exchange Server 2013 CU7 Installation Issue

Question

Error:
The following error was generated when "$error.Clear();
            if ($RoleProductPlatform -eq "amd64")
                try
                    # Need to configure the ETL traces before the fast service is installed. This will ensure that when the service comes up
                    # it will have the necessary trace session setting available to read from the registry
                    $fastPerfEtlTraceFolderPath = Join-Path -Path $RoleBinPath -ChildPath "\Search\Ceres\Diagnostics\ETLTraces"
                    $fastDiagnosticTracingRegKeyPath = 'HKLM:\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing'
                    if(-not(Test-Path -Path $fastPerfEtlTraceFolderPath))
                        $null = New-Item $fastPerfEtlTraceFolderPath -Type 'Directory' -Force
                    if (-not(Test-Path -Path $fastDiagnosticTracingRegKeyPath))
                        $null = New-Item -Path $fastDiagnosticTracingRegKeyPath -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'TracingPath' -PropertyType 'string' -Value $fastPerfEtlTraceFolderPath
-Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'TracingFileName' -PropertyType 'string' -Value 'DocumentProcessingTrace'
-Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'DocumentParserSuccessLogMessage' -PropertyType 'Dword' -Value 1 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'DocumentParserLoggingNoInitialisation' -PropertyType 'Dword' -Value 1 -Force
                    # Max trace folder size 50 * 100 = 5GB
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'MaxTraceFileSize' -PropertyType 'Dword' -Value 50 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'MaxTraceFileCount' -PropertyType 'Dword' -Value 100 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'UseGeneralSwitch' -PropertyType 'Dword' -Value 1 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'GeneralSwitch' -PropertyType 'Dword' -Value 1 -Force                  
                catch
                    # ETl tracing is not critical. Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while trying to Configure the FAST ETL traces. Exception: " + $_.Exception.Message);
                try
                    $fastFusionRegKeyPath = 'HKLM:\SOFTWARE\Microsoft\Office Server\16.0\Search\FlightControl'
                    if (Test-Path -Path $fastFusionRegKeyPath)
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_new_enabled' -Force -ErrorAction SilentlyContinue
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_old_enabled' -Force -ErrorAction SilentlyContinue
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_compare_outputs' -Force -ErrorAction SilentlyContinue
                catch
                    # Removing new fusion keys is not critical. Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while trying to remove the fast new fusion reg keys. Exception: " + $_.Exception.Message);
                $fastInstallConfigPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\Installer";
                $command = Join-Path -Path $fastInstallConfigPath -ChildPath "InstallConfig.ps1";
                $dataFolderPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\HostController\Data";
                # Remove previous SearchFoundation configuration
                &$command -action u -silent;
                try
                    if ([System.IO.Directory]::Exists($dataFolderPath))
                        [System.IO.Directory]::Delete($dataFolderPath, $true);
                catch
                    $deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath + " - " + $_.Exception.Message;
                    Write-ExchangeSetupLog -Error $deleteErrorMsg;
                # Re-add the SearchFoundation configuration
                try
                    # the BasePort value MUST be kept in sync with dev\Search\src\OperatorSchema\SearchConfig.cs
                    &$command -action i -baseport 3800 -dataFolder $dataFolderPath -silent;
                catch
                    $errorMsg = "Failure configuring SearchFoundation through installconfig.ps1 - " + $_.Exception.Message;
                    Write-ExchangeSetupLog -Error $errorMsg;
                    # Clean up the failed configuration attempt.
                    &$command -action u -silent;
                    try
                        if ([System.IO.Directory]::Exists($dataFolderPath))
                            [System.IO.Directory]::Delete($dataFolderPath, $true);
                    catch
                        $deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath + "
- " + $_.Exception.Message;
                        Write-ExchangeSetupLog -Error $deleteErrorMsg;
                # Set the PowerShell Snap-in's public key tokens
                try
                    $PowerShellSnapinsPath = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\";
                    $FastSnapinNames = @("EnginePSSnapin", "HostControllerPSSnapIn", "InteractionEnginePSSnapIn", "JunoPSSnapin",
"SearchCorePSSnapIn");
                    $officePublicKey = "71E9BCE111E9429C";
                    $exchangePublicKey = "31bf3856ad364e35";
                    foreach ($fastSnapinName in $FastSnapinNames)
                        $fastSnapinPath = $PowerShellSnapinsPath + $fastSnapinName;
                        $assemblyNameProperty = Get-ItemProperty -Path $fastSnapinPath -Name "AssemblyName" -ErrorAction SilentlyContinue;
                        if ($assemblyNameProperty -ne $null -and (-not [string]::IsNullOrEmpty($assemblyNameProperty.AssemblyName)))
                            $newAssemblyName = $assemblyNameProperty.AssemblyName -ireplace ($officePublicKey, $exchangePublicKey);
                            Set-ItemProperty -Path $fastSnapinPath -Name "AssemblyName" -Value $newAssemblyName;
                catch
                    # Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while configuring Search Foundation PowerShell Snapin. Exception: " + $_.Exception.Message);
        " was run: "System.Exception: Failure configuring SearchFoundation through installconfig.ps1 - Error occurred while configuring Search Foundation for Exchange.System.ServiceModel.EndpointNotFoundException:
Could not connect to net.tcp://exchange.domain.com:3803/Management/InteractionEngine. The connection attempt lasted for a time span of 00:00:02.0470060. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.0.0:3803. 
---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.0.0:3803
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Ceres.CoreServices.Admin.INodeOperationsManagementAgent.AddNamedNode(String node)
   at Microsoft.Ceres.Exchange.PostSetup.NodeManager.DeployInterationEngineNode()
   at Microsoft.Ceres.Exchange.PostSetup.DeploymentManager.Install(String installDirectory, String dataDirectoryPath, Int32 basePort, String logFile, Boolean singleNode, String systemName, Boolean attachedMode)
   at CallSite.Target(Closure , CallSite , RuntimeType , Object , Object , Object , Object , Object , Object , Boolean )
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Al

Answer 1

Hi,
Agree with ED.
The key message is “Could not connect to net.tcp://exchange.domain.com:3803/Management/InteractionEngine.
The connection attempt lasted for a time span of 00:00:02.0470060. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.0.0:3803”
You need to check why it’s block. Any firewall or the port is listened by other processes.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support