Excise invoice change

When i do the change in J1IEX for the internal invoice
in order to round off the Total BED,Total ECS,TotalSEcess
for example BED  is rounded off from 194.56 INR to 195 INR
ECS is rounded off from 3.95 to 4.00 INR
SCess from 1.95 INR to 2.00
but after enter the rounded off value in change mode
the value is multiplied for example BED is 390 INR ,ECS is 8.00 ,SC cess is 4
if we want to round off the value it multipied every time
please provide the solution

HI,
Go to Logistic General --> Tax on Goods Movements --> INDIA > Basic Settings> Company code Settings
Check the check box Rounding duty on procurement and Rounding Duty On  Removal
Thanks
seshu

Similar Messages

  • Can we change billing doc without cancelling( excise invoice is subsequent)

    Dear all,
    Here is a urgent issue
    One Excise invoice has been created with reference to a billing document
    and we have not maintained tax code in that condition records so it is not allowing to release the doc for accounting entries
    now my requirement is without cancelling the excise invoice and also not to do transaction  J1ih,( to create excise JV for direct GL entries
    i want to change the billing document
    Thanks in advance

    have not maintained tax code in that condition records
    While it is not necessary to reverse the excise invoice, the fact is that since tax code was not flowing in billing document, I am sure, excise duty would also not be flowing, in which case, your excise invoice is also generated for wrong value. 
    I would be surprised if you say that excise values are flowing in billing document and also in excise invoice and if your issue is only tax, then as already suggested, maintain a condition record (with the date in line with pricing date in billing document) and try.
    G. Lakshmipathi

  • Change mode of the excise invoice is showing zero excise values

    H ifriends,
    The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
    While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
    Thanks
    Sasi

    s

  • Excise Invoice Number  Series Change

    Hi Gurus
    Its very close to end of financial year on 31st march and according to the rules
    of Excise.. the excise number series should be changed ..
    so plz anyone suggest me how this number series is maintained and how it can be changed

    Hi,
    If it is related with Maintaining New Number Ranges:
    Go to the T ransaction SNUM and maintain the New number range for the Excise Invoices.
    Regards,
    Anji

  • Excise invoice number showing display option in J1IEX change mode.

    Hi CIN Experts,
    We are using E.C.C6.0.
    In Excise transaction T.code: J1IEX Change option, Official Excise invoice number (J_1IEXHEAD-EXNUM) showing the display mode. How can change the Official Excise Document Number is display mode to change mode in T.code: J1IEX change option.
    In 4.7E system showing the change option in T.code: J1IEX change mode.
    Regards,
    Hanuman

    We cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
    It is SAP Standard & to break this you would need the access key from SAP.
    If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
    Thanks & regards
    Hameed Parvez

  • In J1IIN the excise invoice type is not getting changed to BOND for Export

    Hi Experts,
    In ECC 6.0 I am trying to create an Excise Invoice (Export) but the system in J1IIN is not allowing me to change Excise invoice type to Bond (deemed is reflecting in Blue), some more details are as follows:
    The Customer is for Country India, the currency is INR, the series group is 20 (export), the sale order is of Export, the customer pricing proc in the customer master is same as what we select for other exports customers.
    I have checked the configuration in IMG---LOGISTICS GENERAL--TAX ON GOODS MOVEMENTS-INDIA---BUSINESS TRANSACTIONS-OUT GOING EXCISE INVOICE---MAINTAIN DEFAULT EXCISE GROUPS AND SERIES GROUPS, the EXPORT column is blank.
    Please advice as to how I will be able to get the export under bond in Excise Invoice type
    Thank you,
    Sagar R K

    Hi Sagar..
    Please note that in order to change the excise invoice type to Bond, System has to meet the below to requirement.
    1. Currency should be foreign ( I mean other than local currency, In case of India currency is INR) OR
    2. Ship to Party should be outside the country.
    By going through your comments, I understand that what ever excise invoice type is reflected in the excise invoice i.e,Deemed is correct only.
    If you want to treat this is as export then check the above mentioned two points..
    Thand and Regards
    Muralidhar Shetty

  • How to change the Quantity in Excise Invoice where PART1&2 are posted

    Dear Gurus
    I have a PO with 2 Qty
    Where i have received GR for  1 QTY with excise invoice for 1 Qty
    now the User is done GR for 2 Qty with excise details of 1 where Part 1&2 are posted
    now i want to change the quantity from 2 to 1 in Excise Document and the GR
    how to solve this issue
    Please help me

    Hi,
    As you needed, 1st reverse GR document in 102 Movement type in t.code: MIGO and cancel the excise entries with t.code: J1IEX, go for post and then cancel for excise amount with entering Rejection Code in miscellaneous TAB.
    Regards,
    Biju K

  • Change posting date in incoming excise invoice

    I need to be able to change posting date in incoming excise invoice. It just takes the date from GRPO and doesn't let me edit it. There are instances when I get excise invoice at a later date, and when that date may be in the next month, I want to be able to post excise entry in the next month. If it posts in the previous month, and if the excise returns have been filed, the closing balances will differ. For the documentation purpose, we have the document date, which can be same date as the GRPO date.

    Hi Krishna.....
    This should be legally taken as GRPO date because its excise rule when you receiving material your Excise invoice should on the same date. So whatever system is behaving its legally correct. You cannot change the Incoming Excise Date as you wish. It must be the GRN date.....
    Regards,
    Rahul

  • Excise duties can be changed in AP Invoice after raising excise invoice

    After raising a GRPO and then Excise invoice, we should not be allowed to change the excise amounts in AP Invoice. Otherwise, this will lead to discrepancies in the accounts. Is there any way to restrict user to update these values. Not just the user, the system also updates these values when I change the unit rate (my excise is already calculated on the assessable value in the excise document)

    Hi
    If u dont want to change the Unit Price or Rate in Invocie then Restrict the Authorisation for the end user to change the price, this u can easily achieve by Untick the Filed of Unit price in Formsettings and make authorisation to that user - "No Authorisation to Formsettings"
    or U can Use SPtransactionNotification to valide ur process, so it will not allow to change the price..
    Giri

  • Supplementary excise invoice: how to raise SI when in there is change in pr

    Supplementary excise invoice: how to raise SI when in there is change in price in transit

    hi
    you have to run T.Code J1IH and click on Other adjustement and refer the original excise invoice document
    do revert if any issues
    regards
    chander

  • Excise Invoice date to be changed

    Hi ,
    we had gone live in April. We are entering backdated entries. Our user, by mistake, entered 19.05.2010 instead of 19.04.2010.
    SO can anybody convey, how to change this date? please suggest...
    Regards,

    Hi Prasanna,
    As clear from your communication, you have problems related to excise invoice posting date for your sales excise invoices.
    As a result of wrong posting date, debit register would also have been wrongly generated.
    As a process point of view you can cancel the excise invoices(J1IH->cancel excise invoice) & re-generate with correct posting date . Debit register will also be corrected with this.
    You can create one LSMW for cancellation & re-creation steps.
    If you want to take debug change steps with ABAP, you will have to change the dates in three tables, Excise header, excise detail & Part2 table as well.
    thanks,

  • Number not change in excise invoice print

    hi all,
    we have a problem with excise invoice print.
    previously invoice created with number 49, now new number get posted with 49 again.
    check in J1I9 for number range. it shows current number 49 means print out expected number was 50 but it prints 49.
    can somebody helps me to identify error ?
    thanks in advanced.

    Dear,
    Please go in change mode and check it's setting is like that,
    Subobject data element : J_1ISERGRP
    To-year flag                  : Tick
    Number length domain   : NUMC10
    No interval rolling           : No Tick
    Number range transaction : Blank
    Regards,
    Sandip

  • Change Excise Invoice no in J1iex Tcode

    Dear Sirs ,
                      I have done migo & capture excise invoice no date etc. Now i want to change excise invoice no through J1iex . is it possible. pls giv solution if any.
    Regards
    Abhishek Tiwari

    Cancel material document MIGO if stock not consumed,Cancel excise invoice thru J1IEX. Redo same process,enter correct excise invoice no.

  • Excise invoice price is updating with sales order how to change

    Dear All,
    I am following TAXINN tax procedure.
    when any misstake happens in price i have to cancell all the process. from excise invoice to sales document.
    even if i am updating the billing invoice and again creating the excise invoice its taking the price from sales order price.
    How can i update the price in excise invoice with billing document not with sales document.
    Thanks with Regards
    Subrat

    Actually when we are canceling the excise invoice and updating the billing document with new price and again creating the excise invoice its taking the old price not the updated price.
    this is what the problem is .
    how system will concider the updated price for excise invoice.
    Thanks with Reagrds
    Subrat

  • Change the status of Excise invoice from deleted

    Hi,
    In the transaction J1IEX, we have canceled one excise invoice by mistake.
    This Excise invoice was actually meant to be posted.
    What can be done now to post the excise invoice now in the system?
    Please help.......
    Regards,

    Thanks Kunal.
    Now what can be done?
    Should we cancel the material document (Goods receipt document)?
    Regards,

Maybe you are looking for

  • Filtering data from a table view to another

    Hi, I am using a function module in Visual Composer which output sends a list of processes with related activities. One process can have several activities and I would like to display all related activities for on process on a second table when a row

  • . BUP and IFO files

    I am looking to edit a DVD that found it's way to me. All I have are files that are: .BUO .IFO .VOB I can open and save the .VOB, but the other two do not work. Please help! thanks

  • Does iTunes duplicate mp3 files I import, thus doubling space used on mac?

    Hello. May be a silly question, but here goes: When I import mp3's onto my mac (from my old computer), i put them all into one folder.. when i double click to play, they automatically play through itunes.. now i've noticed that itunes NOW ALSO create

  • Track order incorrect

    I have a couple albums on my iPod where the track order is listed incorrectly. The track order used to be correct very recently (not exactly sure when, probably about a week ago). When I sync with iTunes and click under my iPod the tracks are display

  • Where is my files after Lion

    Before our files were at Library/application support/iWeb/Domain... but it is not there anymore.  Lion moved it.  I would like where he put them?  Thank you Odette