Excise pass on onTrading material

hello,
could u please tell me how excise /cenvat/registers update or flows in case of trading material,also how to configure the same.
thanking u
Jalinder

hi  durga,
Scenario is
1) Plant  P (Trading Excise)
2) Material  A -
Through P.O.
                 B -
Through P.O. &store.                     
Now when customer C places order for material A & B to plant P ,then plant P places orde to Vendor V,after receiving A & B(or store) from vendor,Plant p supplies to Customer C .for above case how i should confi.in SPRO.
Also i have to maintain different no ranges  for excise gate pass   for Material A & B.plz giude me
thanking u
Jalinder

Similar Messages

  • To Capture Excise Duties for Customer Material

    Dear All,
    Issue is regarding to capture excise invoice
    for Customer Material.
    1.
    one of our client receives Customer material which
    should not be reflected in
    stock.
    2. Excise should be captured which
    receiving
    3. Now
    when this Customer material is returned back to
    customer along with
    the assembly (i.e. the material received from
    customer is fixed
    in Assembly and sent back to
    customer),
    4. Now
    the excise
    captured should be transfered back to customer's A/c.
    I tried
    doing by creating a material type as customer material, where in
    Stock will be reflected but value will not be reflected, where exactly
    we
    can capture the excise details for this scenario.
    How
    to
    proceed further to complete his scenario.
    Consider this
    issue
    to be on high priority &  i/p will be of great help.

    Dear Vijayashree
    From your comments what I understood is that for a particular FERT, you are procuring one component from the buyer, assembling it and invoicing to the same customer.
    If this is the scenario, I dont know how you can invoice without maintaining BOM for that.
    If the client don’t want to maintain BOM for the same, the only option is as follows to my knowledge.
    Whenever the client receives the component, take credit of the duty amount by updating <b>J1IH</b>. While doing PGI, since you have not maintained this component in BOM, stock will <i>ONLY</i> reduce for other components.  So no-where, your client can track the customer’s component.
    Parallelly, apart from selling price, to the extent of excise duty value, one more condition (say ABCD,  to be maintained.  So in your pricing procedure, the assessable value should be PR00 + ABCD for which, the excise duty should be captured so that the client can recover the duty amount from customer.
    Finally, for this practice, the client should maintain datas (how many procured and how many invoiced) manually to convince the government officials but then, I am not sure, how far this will be accepted by the officials.
    Thanks
    G. Lakshmipathi

  • Why there is no dependent req. passed from discontinued material ?

    Dear gurus,
    I set discotinue indicator=1, effective-out date and follow-up material. But, there is no dependent requirement passed from discontinued material material. That is I can't see the dependent requirement for the follow-up material. Anyone tell me the reason? Thanks!
    Regards
    David

    I will test soon. Thanks to all involved.

  • Error in Excise Data subscreen in Material Master:Foreign Trade-Import Data

    SAP Net Weaver ECC6.0
    I have added the 'Excise data' subscreen in Material master 'Foreign trade IMport' and 'Foreign Trade Export' tab. But facing the following problem. please help.
    There are two buttons called 'More' and 'PreVals' in that subscreen. If I click either of them, it gives an error message as below
    "Record 21 MORE does not exist in table T133E
    Message no. M3748"
    and
    "Record 21 J1PR does not exist in table T133E
    Message no. M3748"
    Kindly help what to do

    OK
    Lets starts from first step.
    Go to OMT3B
    1.  Copy 21 and make it 91
    2. Then from left hand side select Data screens no 15 copy it and make it 91 - Z1
    3. Then again go to left hand side   Subscreens and copy 6 and make it 91 - 71 - z and assign screen no 2205 and add prograne as SAPLJ1I_MATERIAL_MASTER
    save it
    Then go to OMBt3E and copy 01 -* HERS * 12 and mahe it 01 -* ROHor FERT * 91 and save it and then check and revert back
    regards

  • Additional excise pass on for Past depot sales

    Dear Gurus,
    We need to pass on the additional excise duty captured at depots using J1IGA to the sales which was made in the past.
    Normally, we pass on the excise using J1IJ for the corresponding Depot delivery. But in this scenario, the Delivery document already has been taken reference for excise pass on. I request you to provide a solution to pass on the additional excise duty to the past sales and the same should be reflected in RG23D register as the additional excise duty input entry is also shown in RG23D.
    Thanks in advance,
    BVS.

    Thanks Riaz for your reply. I don't think table entry is the feasible approach. We may create a supple invoice to the customer.  Passing on the ED and hit the RG23D register is the question. I think we can create the entry in J1IGA it-self for the corresponding internal document/folio number combination.  But the problem in J1IGA is, once the Qty for the folio number gets completed, system is not allowing to create entry against that folio number. Is there any note or customization setting to enable the J1IGA additional excise entry even the qty for the folio number is totally sold from the depot???
    Awaiting for the replies from the SD-CIN gurus.
    Regards,
    Kotesh.

  • Excise posting of scrap material in subcontracting process

    Hi expert,
    Suppose we have send 10.000 mt of semi finished material having material code xxxx for job work to AAA Vendor and will receive back 9.500 mt of material having material code yyyy with the invoice of job work charges.  The difference of qty (10.000-9.5000=0.500) in material is due to the wastage in the form of scrap. Now we have to deposit the excise duty on scrap (wastage) to the excise department because the vendor is selling this scrap to another customer, where as we have not charged any excise duty while sending material for job work. For depositing excise duty to the dept we have to issue invoice for the same qty to the vendor whereas scrap is already with the vendor. Also we have to book the vendor invoice for job work charges on the material received.
    Regards,
    Santosh

    hi,
    there are some ways to solve this issue
    if u know the scrap qty before sending the material to vendor, put -ve qty in BOM in the name of scrap material number, whenever u receive the parent material scrap also get into account of our inventory as well as excise books in terms of value. further you need to do 542 for scrap material alone for qty updation in excise and inventory.then we can raise the sale invoice against that vendor and sale the scrap with TCS (Tax collecting from source)
    try this iam sure it will work
    Regards
    Sridharan

  • Excise Invoice no. using Material document no.

    Hi Masters
      How to find Excise Invoice no. using material document no.(In my case it is GR No.)
    Regards
    Mohan

    Hi,
    Use: J1I7 , In selection range you can give Excise Group, Excise Transaction Type as GRPO , Vendor Number, Material Document , Material or Purchasing Document , select  Part 1 and part 2 Posted , Off.No is Excise Invoice No entered at the time of Excise Capturing.
    Regards,
    Vikas

  • How to Handle excise pass-on in SAP-B1 for Trading companies?

    Hiii Experts,
                         Currently, we have new project and our client is trading company. As a trading company, there is not any credit of excise will be taken. just pass-on of excise duty is done from vendor to customer as it is.
                         As per my knowledge, there is not any provision available in SAP-B1 to track the details of  excise pass-on. is there any way is available to handle this excise scenario's for trading clients??
                           Please, help me, it is very important to us.
    Regards
    Rahul Singh

    Hi Rahul,
    Yes this can be customized in SBO with or without add-on.
    First step would be understand the complete business process of  the customer and then map in SBO accordingly.
    You would have to create many udf's at row level to capture the details at the time of purchase and you can use the same references at the time of sale of the item.
    As I have mentioned before, it may take extensive customization, so you can decide whether you woudl like to create an add-on for it or woudl you like to handle this through SP, fms etc.
    Thanks,
    Joseph

  • Unable to create excise invoice against the Material document

    Hi experts,
    Unable to create excise invoice against the Material document in J1IEX transaction.
    Material document is generated through quality management which movement type is 105.
    error message :
    Material document cannot be processed
    Message no. M7130
    Thanks
    SAP MM

    Steps to do GR along with excise,
    1.Capture excise invoice using J1IEX.
    2. Refer excise invoice no. in MIGO(SAP not recommends to post excise invoice against 105 mvmt against blocked stock)
    3. Post excise invoice using J1IEX

  • Quality Inspection stock passed to new material unrestricted stock

    Hello Friends,
    I have created production order and done MB31 with ref to production order and at that time inspection lot is automatically created and quality having the stock suppose 10 kg.
    And then i have completed the usage decision and passed 5 kg to production order material unrestricted stock and 5 kg to some another material unrestricted stock and now therefore no stock in quality.
    Now i have do the reversal scenario.
    With the help of movement type 102 with ref to production order i can reverse the unrestricted stock quantity of the production order material
    then 5 kg is reversed . and i have cancel the inspection lot.
    But i have to ask how to reverse the quantity with have passed to new material unrestricted stock ie remaining 5 kg.
    My solution says:
    I have to first with help of mvt type 310 pass the stock from the new material to production order material and then have to 102 mvt type with complete quantity 10 kg and then cancel of inspection lot and creation of new lot again with 101 mvt type.
    Please tell me above procedure is the right solution or there any other method also exist.
    I have read one solution that i have to change the inspection type 08 in material master and then do reversal with the help of movement type 322. but in this i have to go material master.
    We are avoiding to make material master changes .so this solution doesn't suits me.
    Secondly with the help of user exits , i have done the cancel of usage decision but that also never reverse the material stock.
    correct me if am wrong.
    Thirdly  i have implemented the note report also ,but that also doesn't work becoz my material is serialized and for serialized material that report doesn't get executed.
    Please give me ur suggestions and solutions.
    Thanks a lot.

    Dear,
    I think you have no perticular solution if it is intergated with QM.
    Once you do UD and the reversal is very deficult.
    Hence if you want to get the original material stock from new material..perform MB1B and tranfer the stock.

  • How to capture the excise duty on free material purchasing?

    Scenario is like this if we purchase a lot of material then vendor gives free on some qty. then we make a purchase order for free material with tax code zero. Vendor supply that free material with excise duty. Now we do GRN & take part1 entry. How to capture part II entry. This is capital item.

    If you are following J1IEX route , then Tick MRP indicator & enter Excise duty values & take Part2.
    It is assumed that all other master data like chapter heading etc are set.
    Hope this will help.
    Regards,
    AK

  • EXCISE in Customer Returned Material

    Had searched, but couldnt find this kind of query
    Hai All,
       Actual sales - OR - DEL- pgi- Invoice - Outgoing Exc.Invoice-
    now, when customer returning goods,
    RE order ( with / without ref) - LR - pgr -  RE - Cr for Returns ( i havent created any exc invoice for  RE billing)
    How to reverse the excise entries, in both cases ( with OR without ref to OR/F2)
    I did - J1I7 to know find the Outgoing Exc.Invocie of original/ref Billing doc-
    ( how can we find, if there is no ref when creating RE-order?)
    Then, I tried to Capture Exc.Invoice- J1IEX ( wrt: Without Purchase ORder -EWPO)-
    I entered the Original Outgoing Excise invoice - system throws mssg as " Material Document can not be processed"-
    am I following wrong path? - or you want me to Make Adjustments directly in J1IH ( all debit entries - Other adj / Credit entries- Addnl Adjust) .
    Please Clarify-

    DOne
    flow:
    VA01-VL01N-VF01-J1IH

  • Change description of excise item tab Raw material to Input material

    Hi,
    We have upgraded R3 4.7 to ECC 6.0 now we required in MIGO transaction Excise Item tab Indicator for Material type we need to change the description of this as RAW MATERIAL to INPUT MATERIAL and Consumable to Capital Goods which is in R3 4.7
    Please suggest me any config.
    Thanks
    Shital D

    Hi,
    The above material type showing in MIGO screen, as you already declared the material under which material category in J1ID & so then value flowing.
    You can not change here  &  you have few options to declared the material under which material categories.
    You can keep all raw material as raw material & Consumable as asset.
    But if your business needed very much, Just have a discuss with ABAPer for your requirement.
    Regards,
    Biju K

  • Excise Item tab in Material Document

    Dear Gurus,
    How to make the Excise Item tab viewable for while Displaying the material document
    Thanks in advance

    Even I am also facing same probelm that is when we are processing the MIGO I get the Excise tab but when I display the same document system is not displaying excise tab. for this I am alternatively checking part II in J1IEX transaction. I thing by applying this note it should show the excise tab.
    Vinay:If you have applied this patch please let us know the result
    If there is any more inputs please provide
    Thanks
    Dhananjaya
    Edited by: Dhananjayappa E on Jan 13, 2009 5:04 PM

  • What are the parameters have to pass to bapi material creation?

    can any one help me in creating material by using bapi.....
    which is 'BAPI_MATERIAL_SAVEDATA'.....by using the above bapi wen i am creating material....how to pass data to that bapi....what are the thing s i ahve to pass.........

    hi
    please chk this code
    TYPES : BEGIN OF S_BAPI,
            MATNR LIKE MARA-MATNR,
            MBRSH LIKE MARA-MBRSH,
            MTART LIKE MARA-MTART,
            MAKTX LIKE MAKT-MAKTX,
            MEINS LIKE MARA-MEINS,
            MATKL LIKE MARA-MATKL,
            END OF S_BAPI.
    DATA : I_BAPI TYPE STANDARD TABLE OF S_BAPI WITH HEADER LINE.
    PARAMETER : P_FILE LIKE RLGRAP-FILENAME DEFAULT 'C:\Documents and Settings\mansi_makhijani\Desktop\upload.txt'.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      CODEPAGE                      = ' '
       FILENAME                      = P_FILE
       FILETYPE                      = 'DAT'
      HEADLEN                       = ' '
      LINE_EXIT                     = ' '
      TRUNCLEN                      = ' '
      USER_FORM                     = ' '
      USER_PROG                     = ' '
      DAT_D_FORMAT                  = ' '
    IMPORTING
      FILELENGTH                    =
      TABLES
        DATA_TAB                      = I_BAPI
    EXCEPTIONS
      CONVERSION_ERROR              = 1
      FILE_OPEN_ERROR               = 2
      FILE_READ_ERROR               = 3
      INVALID_TYPE                  = 4
      NO_BATCH                      = 5
      UNKNOWN_ERROR                 = 6
      INVALID_TABLE_WIDTH           = 7
      GUI_REFUSE_FILETRANSFER       = 8
      CUSTOMER_ERROR                = 9
      NO_AUTHORITY                  = 10
      OTHERS                        = 11
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    DATA : S_HEADDATA TYPE BAPIMATHEAD,
           S_CLIENTDATA TYPE BAPI_MARA,
           S_CLIENTDATAX TYPE BAPI_MARAX,
           I_MAKT TYPE STANDARD TABLE OF BAPI_MAKT WITH HEADER LINE.
    LOOP AT I_BAPI.
      S_HEADDATA-MATERIAL = I_BAPI-MATNR.
      S_HEADDATA-IND_SECTOR = I_BAPI-MBRSH.
      S_HEADDATA-MATL_TYPE = I_BAPI-MTART.
      S_CLIENTDATA-MATL_GROUP = I_BAPI-MATKL.
      S_CLIENTDATA-BASE_UOM = I_BAPI-MEINS.
      S_CLIENTDATAX-MATL_GROUP ='X'.
      S_CLIENTDATAX-BASE_UOM ='X'.
      I_MAKT-MATL_DESC = I_BAPI-MAKTX.
      I_MAKT-LANGU_ISO ='EN'.
      I_MAKT-LANGU ='EN'.
      I_MAKT-DEL_FLAG =' '.
      CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
        EXPORTING
          HEADDATA                  = S_HEADDATA
       CLIENTDATA                  = S_CLIENTDATA
       CLIENTDATAX                 = S_CLIENTDATAX
      PLANTDATA                   =
      PLANTDATAX                  =
      FORECASTPARAMETERS          =
      FORECASTPARAMETERSX         =
      PLANNINGDATA                =
      PLANNINGDATAX               =
      STORAGELOCATIONDATA         =
      STORAGELOCATIONDATAX        =
      VALUATIONDATA               =
      VALUATIONDATAX              =
      WAREHOUSENUMBERDATA         =
      WAREHOUSENUMBERDATAX        =
      SALESDATA                   =
      SALESDATAX                  =
      STORAGETYPEDATA             =
      STORAGETYPEDATAX            =
      FLAG_ONLINE                 = ' '
      FLAG_CAD_CALL               = ' '
      NO_DEQUEUE                  = ' '
    IMPORTING
      RETURN                      =
    TABLES
       MATERIALDESCRIPTION         = I_MAKT
      UNITSOFMEASURE              =
      UNITSOFMEASUREX             =
      INTERNATIONALARTNOS         =
      MATERIALLONGTEXT            =
      TAXCLASSIFICATIONS          =
      RETURNMESSAGES              =
      PRTDATA                     =
      PRTDATAX                    =
      EXTENSIONIN                 =
      EXTENSIONINX                =
      NFMCHARGEWEIGHTS            =
      NFMCHARGEWEIGHTSX           =
      NFMSTRUCTURALWEIGHTS        =
    NFMSTRUCTURALWEIGHTSX       =
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
    WAIT          =
    IMPORTING
    RETURN        =
    ENDLOOP.
    ~hitesh
    If your queries are solved try to close the thread

Maybe you are looking for