Excise rg23c reversal

hi gurus
very urgent
some j1iex transactions posted to RG23C rigisters instead of RG23A rigisters, actuall postings belongs to INPUT but the postings done for Capital please advise me how to reverse this with out cancelling j1iex.
if the vice versa i can use J1ih other adjustemnt tab for reversal and aditional excise duty tab for actual posting. but above case it was not working because the 50% amount is gone to cenvat on hold account . how to post reversal entry and actual entry please advise
Thanks
Ashwini

Dear,
have you define material as Asset in J1ID?
Please follow below process for reversing:
1. If MIRO has been done then Reverse MIRO-MR8M
2. Cancel MIGO
3. Post Excise Invoice through J1IEX
4. Cancel the Excise invoice... J1IEX
Once above activity is done post the maerial document again and ensure your material is defined as Raw Material in J1ID.
Hope this helps!!
Br,Vivek

Similar Messages

Excise invoice reversal with J1IS..

Dear All,
I have created excise invoice for stock transfer (with 351 mat document ) by using J1IS in which registers are getting
debited and cenvat clearing account is getting credited....the process is correct
Now i want to reverse this excise invoice due to some wrong doing....how i can reverse this excise invoice?
I tried doing cancel excise invoice in J1IS ...invoice is canceled but i am not able to post it in accounting so that
registers will get credited and cenvat clearing account gets debited (Reverse of previous entry)
Please tell me correct process of excise invoice reversal in this case so that all a/c entries will be reversed accordingly.
Also i tried canceling 351 document and tried excise invoice creation by using 352 material document but my excise group is
different for different plants so it is not accepting 352 mat document.
please help me out..
Thanks,
Naren

Hi,
The J1IS is the JV to adjust the Excise values if you had canceled J1IS then Release to accounting using J1IV
Again try to post J1IS for 351 Movt type document type or else you can pass JV to adjust the worng entries. Hope this helps.

Excise invoice reversal

Hi All,
I have created a Subcontracting PO at depot, transfered the material components to subcontracting vendor and done the GRN against It. Because of some reason I reveresd The GR document. And when I am trying to reverse the excise invoice systen is giving the message that "The excise Invoice HC0066 is already being posted for the vendor 1400519." what should be the reason.

Hi
Process for scenario 1:
Since you have already posted the EI (excise invoice), reverse the material document and then post the EI whose status will be set to In process.
Now post the material document (for receipts) for updating the part1 and then post the EI.
And for scenario 2:
I assume that though a single EI exists,it has all the materials for of both goods receipts.The above process still holds good for this scenario too.
Cheers,
Satish

Automatic Excise Invoice reversal in Sales return

Ours is a manufacturing plant.
We sell Excisable goods to our Customer.
Normal Sale Cycle:
VA01-VL01N-PGI-VF01
(Excise Invoice gets generated automatically in background as Invoice is saved)
Our Requirement:
Client wants to map Customer Returns Scenario.
I have gone through helpful notes and got clear with Return proccess(SD)
VA01-Return Order( w.r.t. Original Invoice)
VL01N- Return Delivery (w.r.t Return Order)--PGR
VF01--Credit Memo( w.r.t Return Order)
I need a solution for Automatic Excise Invoice reversal as goods are returned by customer to Plant.
Our client wants that reversal should happen automatically in background.(at any stage either as PGR is done..or else)
Client doesnt want to go for J1IH-manual JV posting.
kindly guide me Configuration steps to achieve this with registers updations and a/c effects.
also correct me if i am wrong in above understanding.
Thanks ,

Hi,
Thanks for ur suggestion.
(Firstly i created VA01-Return order-VL01N-Return Deliv-PGR-VF01-Credit memo-w.r.t REturn Order)
As suggested i tried with J1IH-Other Adju.
A/c Entries of Original Excise Invoice:
I inputed in J1IH -Other Adj.
Document number:-Excise Invoice Number( is it correct reference)
Year:
com. code:
plant:
Series grp:
Modvat Account: RG23A:
I manually inserted line item,Material Number and BED,E.CESS,S.H.CESS values as per Excise Invoice and later save the document.Excise JV was generated with PART 2 entries updated..
A/c Entries of Excise JV:
Here kindly give your feedback whether above process and entries are correct.
Q:How will i reconcile Original Excise Invoice and Excise JV,since its now showing in Doc Flow.
Does it reflect in any t code.
Thanks ,
Vilas

Excise RG23C Part 2 reversal

Hi
At our client place the user has posted the RG23C II entry (J1IEX) with wrong value, which is in last financial year, now we want to revese part II entries. So can we reverse ONLY part II entries, by cancelling through J1IEX ? When we have tried it's not posting. Also if we post it in this month will it affect last month's registers? Please let me know the exact process of cancelling.
Thanks..!

HI, if you can reverse excise invoice in same month system will allow but before this you have to cancel material document also which is created with movment type 101.
And at per excise point of you, once document posted you should not revert excise invoice, better use J1IS for creating revert excise invoice.
Thanks.
Virendra

Excise Invoice Reversal Problem

Dear All,
I got a situation which is explained below-
I did GRN & then reversed it through MBST T.code because of which i am not able to cancel EXCISE INVOICE.
Related to this problem i saw various threads in which it is mentioned that use J1I5 for updating RG23A part 1 but when i am doing so i am not getting any list in next screen.
Please suggest how to cancel the excise invoice in this situation.
Regards'
Sandeep

Use the 'Cancel Excise Invoice' option in J1IH
Ravi.

Excise duty reverse entry effect in case of vendor return

All SAP gurus,
At the time of vendor return of excisable material (with movement type 122).
When reversing is done Excise duty shows reverse in Part2 but also shows in J2IUN Report of Monthly excies duty Debit.
It require to debit be excise duty only one time (RG22-PART 2 OR J2IUN).
Is it possible?
Please guide regarding standard procedure / entry in utilization in case of vendor return.
Regards,

Please help me

Excise RG23C Opening Balance

Hi friends,
I have a doubt. Please anybony can helpus.
Let's take an example:
On 1st june, 2010 client goes live.
so opening balances for RG23C is updated in Table and corresponding FI entry is also posted, giving effect in Excise & FI books.
Now if on 1st July,2010 , If there is a finding, that the opening balance posted in June is short by "X" amount (the X amount can be plus or negative).
Question:
How to rectify this?
If there is any JV as to be passed in transaction code J1IH, please can you explain in detail, like the subtransaction type, to be used? so that it will help us
Please can you educate me.pl pl pl
Thank you and Kindest Regards
Srikaanth

Dear,
You can change the balance through J_2IACCBAL table.
just goto table through SE16 then change button on top you can modify the values after that post the balance JV through F-02 FI postings.
Check the below link for more details.
[RG23C opening balance upload|http://www.google.co.in/url?sa=t&source=web&cd=3&ved=0CCAQFjAC&url=http%3A%2F%2Fhelp.sap.com%2Fbp_bblibrary%2F470%2FDocumentation%2FJ33_BPP_32_CHEM_EN_IN.doc&ei=g_9MTIKoAsS6rAf8rIi5Dg&usg=AFQjCNH9SuyMQLBO0n09Wb16cg0060ZuAg&sig2=LFSwxcUVZ0fCcGcwhDcXyQ]
Regards,
Kishore

Excise Invoice Reversal Procedure

Hello Experts,
Please let me know the exact procedure for the reversal of an Incoming Excise Invoice. Which docs. to prepare and what effect does it makes on the JE's. ?
Thanx & Regards,
PAPIL

Hi Papil.......
If you punched Incoming Excise Invoice based on GRPO then in order to reverse it you have to Punch Goods Return based on GRPO and then Outgoing Excise Invoice Based on Goods Return.....
This Outgoing Excise Invoice leads to make a reverse entry for Incoming Excise Invoice........
Try it......
Regards,
Rahul

Excise posting reverse

Dear SAP gurus,
In J1iex i captured and posted excise. Can i reverse that entry. If we can, please explain the entire procedure.

hi
steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 go to J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO) (you can also use the vendor excise invocie number)
4 now in miscellaneous tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings

Reversal of posted Excise invoice ??

Hii
Some body explain the steps involved in reversal of excise invoice posted..??
Like i have created Po, GR done , uring GR i have captured and posted excise invoice .
Now i wanted to reverse the availed CENVAT credit and reversal of excise invoice posted .
Thanks

Hi,
01. Reverse the goods receipt.
The system:
Creates a reversal document to cancel the goods receipt
Creates additional entries in Part I of the appropriate excise register to reverse the original entries
Changes the excise invoice document status to In process.
Reversing Goods Receipts
From the SAP Easy Access screen, choose Logistics --> Materials Management --> Inventory Management --> Goods Movement --> Goods Movement (MIGO).
In the top line:
Select Cancellation.
Select Material document.
Enter the number of the goods receipt that you want to cancel
Choose .
Flag all of the line items as OK.
Save the reversal document.
02.. Reverse the CENVAT posting on the excise invoice.
The system:
Creates an accounting document to reverse the CENVAT postings
Creates a corresponding entry in Part II of the appropriate excise register
Reversing CENVAT Postings
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Post CENVAT.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Choose Simulate CENVAT.
A dialog box appears, showing which postings the system will make to reverse the CENVAT.
To close the dialog box, choose .
Choose Post CENVAT.
03. Cancel the excise invoice.
The system changes the excise invoice status to Canceled.
Canceling Excise Invoices
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Cancel.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Save the excise invoice.
Regards
KK

Restrict excise invoice from proforma invoice after reverse PGI

Hello experts,
Our sales flow is stock transfer order-> Fast Delivery-> PGI -> Billing (jex)--> excise invoice
If we have to reverse the PGI first .System give error (cancel excise invoice first)after cancel excise invoice reverse pgi then cancel proforma invoice (complete).
But once Again excise invoice allows me create from cancel billing document.
My requirement is I want to restrict excise invoice from billing document which already cancel and reverse post good issue.
Thanks

HI G. Lakshmipathi,
I have checked configuration it same as you suggested.
I have compared ABAP code in report MJ1IINI01 with other system ,
there is code to check the cancellation of proforma invoice
*Check if proforma is cancelled (Billing type is JEX & VBRK-VBTYP = 'U')
*For proforma,VBRK-FKSTO is not set as X,but VBRK-RFBSK will be set as E
IF WA_VBRK-VBTYP = 'U' and WA_VBRK-RFBSK = 'E'.
MESSAGE e264(8i) WITH j1ii100-vbeln.
ENDIF.
But in my system its not shown .
So how can i activate this message is there any setting in IMG to activate message .

Cin excise duty entry

hi,
need the advice. please help.
1) for manufacturing, when purchase, the input tax will debit cenvat account, say 100inr. when sales, output tax will credit cenvat account, say (120)inr.
may i know if 100inr is excise duty paid and 20inr (120-100) is excise duty payable?
2) so actually the total duty paid is 100 + 20 = 120inr, correct?
3) may i know what is the difference for excise duty paid / excise duty payable and cenvat receivable account?
3) may i know how is the double entry for point 1 from purchase to sales until RG and pla?
thanks

Hi,
Pl. go through the following carefully. If u see the config. of CIN the column names Excise Account Assignment Table are like RG23A BED etc., Hence the account description(user's discretion) can be CENVAT Account or RG23A account.
Apart from this there are entries in RG23 registers which are Statutory requirement.
Pl. do not get confused with Account and Register. Account will have only the amounts where as registers will contain no. of particulars.
Check the accounting entries for the whole process
What should be my accounting entry in procurement?
For Domestic Procurement of Raw Material
 During GR
 Material Stock Dr.
 GR/IR clearing Cr.
 During Excise Invoice Credit
 Cenvat Account OR RG 23A Dr.
 Cenvat Clearing Cr.
 During Invoice Verification
 Cenvat Clearing Dr.
 GR/IR Clearing Dr.
 Vendor Payable Cr.
For Domestic procurement of Capital Goods
 During GR
 Material Stock Dr.
 GR/IR clearing Cr.
 During Excise Invoice Credit
 Cenvat Account/ RG 23C A/c (CVD) A/c Dr. (50%)
 Cenvat On-hold/ RG 23C A/c (CVD) A/c Dr. (50%)
 Cenvat Clearing Cr.
 During Invoice Verification
 Cenvat Clearing Dr.
 GR/IR Clearing Dr.
 Vendor Payable Cr
Subsequent of Capital Goods
 Cenvat Account/ RG 23C A/c (CVD) A/c Dr. (50%)
 Cenvat On-hold/ RG 23C A/c (CVD) A/c Cr. (50%)
For Excise Duty Credit of Raw Material without PO
 Cenvat Account OR RG 23A Dr.
 Cenvat Clearing Cr.
For Excise Duty Reversal through Excise JV
 Cenvat Clearing Dr. Cenvat Account OR RG 23A Cr.
What should be my accounting entry when the goods are issued through MM and excise invoice is created (J1IS & J1IV)?
During Excise Invoice Creation
 Cenvat Suspense Account Dr.
 Cenvat payable Cr.
Note: Cenvat Suspense Account should be cleared apprpiately using FI JVs.
For TR6C Challan
PLA Account Dr.
PLA on hold Account Cr.
During Fortnightly Utilization
Cenvat payable Dr.
Cenvat Account/ RG23A/RG23C Cr.
PLA Account Cr.
Thanks,
Vijay

Excise Entries in case of sales return

Dear sap mites
Can any one guide me during sales return how excise gets reversed as we would have already paid to the govt during sales how do we take input credit back
please do explain with GL account entries and an example if possible will be very grateful to you
Its of high priority as i have a presentation in front of my client

Ideal way of Excise Entries incase of return may not be cancelling Excise Invoice through J1IIN, as it may be possible that through Excise Invoice, say 10 Quantity was despatched & Return is only 2 quantity.
The Option widely used is as under:
Incase of Return Sales Order:
T.Code for copy control: VTAF
Source Document: F2
Target Document: RE
Item category REN
Considering the above settings are done:
Create return sales order RE (with Reference to Billing Document) & the data will be copied as it is in Return Sales Order - RE. For Eg: here you require to change to quantity from 10 to 2, as you want to take back into Inventory of only 2.
Incase of Return Delivery:
T.Code for copy control: VTLA
Source Document: RE
Target Document: LR
Item category REN
Considering the above settings are done:
Create Return Delivery through T.Code VL01N & do PGR (Post Goods Receipt). This will add the stock to blocked stock. This will take care of Inventory.
To address the issue of how to take Credit for Excise, use T.Code: J1IH --> other Adjustment & based on the credit to be taken, make the necessary entry.
Incase of Credit Memo:
T.Code for copy control: VTFA
Source Document: RE
Target Document: Credit Memo
Item category G2N (Check in System)
First in VA02, remove the Billing Block in Return Sales Order - RE & save the document. Now in T.Code: VF01, enter Return Sales Order Number & select the appropriate Billing Type (Credit Memo) & Enter& Save. This will create Credit Memo.
Hope this helps you.
Regards,
Rajesh Banka
Reward suitable points.

Reversal of posted ED revaluation

Hi all,
I have a question regarding wrong posting of excise duty revaluation. My customer posted double FI and excise document of revaluation after change of excise duty exchange rate and we need to reverse at least one of double documents but within O4KT transaction there is no option for reversal and because the excise duty accounts are automatic it is not recommended to reverse it within FI transaction. Any ideas how to do it? or maybe some other transaction exists that it can be used for reversal? Pls advice.
Thanks

Hi,
01. Reverse the goods receipt.
The system:
Creates a reversal document to cancel the goods receipt
Creates additional entries in Part I of the appropriate excise register to reverse the original entries
Changes the excise invoice document status to In process.
Reversing Goods Receipts
From the SAP Easy Access screen, choose Logistics --> Materials Management --> Inventory Management --> Goods Movement --> Goods Movement (MIGO).
In the top line:
Select Cancellation.
Select Material document.
Enter the number of the goods receipt that you want to cancel
Choose .
Flag all of the line items as OK.
Save the reversal document.
02.. Reverse the CENVAT posting on the excise invoice.
The system:
Creates an accounting document to reverse the CENVAT postings
Creates a corresponding entry in Part II of the appropriate excise register
Reversing CENVAT Postings
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Post CENVAT.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Choose Simulate CENVAT.
A dialog box appears, showing which postings the system will make to reverse the CENVAT.
To close the dialog box, choose .
Choose Post CENVAT.
03. Cancel the excise invoice.
The system changes the excise invoice status to Canceled.
Canceling Excise Invoices
From the SAP Easy Access screen, choose Indirect Taxes --> Procurement --> Excise Invoice --> Incoming Excise Invoices --> Individual Processing --> Change/Display/Post/Cancel.
In the top line:
Select Cancel.
Select Vendor Excise Invoice.
Enter the excise invoice number.
Choose .
Save the excise invoice.
Regards
KK

Excise rg23c reversal

Similar Messages

Maybe you are looking for