Exhange 2013 not working after trying to apply cumulative update 6

Hi All,
Please can you help. Its been over a week since I tried to apply cumulative update 6 on my instance of Exchange 2013 and I am getting nowhere with it. With any user intervention it came up with errors in the middle of applying the update. I can't continue
the installation nor can I roll it back. Most of all it has rendered the server useless.
When I run the update I get the following error;
$connectors=Get-ReceiveConnector - Server $RoleFQDNorName;
foreach($connector in connectors){if($connector.MaxLocalHopCount - gt 1){Set-ReceiveConnector -identity$connector.identity -MaxlocalHopCount 5}};
"Was run: "Microsoft.Exchange.Data.DataValidationException:You must provide a value for this property.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception,ErrotCategory category,Object target,Boolean reThrow,String helpUrl)............................
Please could you help?
Thanks,
Dominic

I recommend that you open support ticket with Microsoft.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

Chat not working after nokia C3-01 software update...

Chat not working after nokia C3-01 software update from 5.65 to nokia 6.00

when is there's gonna this be fixed it has been more than a month
satisfaction level is decreasing with the product

B110a black in still not working after trying all recommended solutions

Hi there
Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a. Be sure to check the vents as shown in solution six, step three. If the above does not resolve the problem the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How come my mini iPad is not working after trying to update apps?

My mini iPad is repeatedly showing me a black screen with a, "white apple," in the middle & then a couple of minutes later it turns off for a few minutes. Then the black screen with the, "white apple," in the middle comes back on again and then it goes black again. Sometimes the black screen would lighten and the whole pattern of these "screens" would start over again. It's been doing this for hours since I fell asleep.
This happened when I was trying to update 4-5 apps at the same time. It had trouble updating the, "Pinterest app." It failed once and I retried it and that's when my mini ipad started to not work. I can't use it at all. I never had trouble updating several apps at one time before. I was at home using my wifi and my wifi strength was at its maximum for the iPad.
The battery was at 40 something%, so I charged it over night. It has the latest iOS update software. I had downloaded that yesterday.
I plugged it into iTunes on my computer and the same thing is happening. It's picking up my icloud stuff like my music and videos and my computer is trying to import photos from my mini ipad automatically, but my iPad isn't fully recognizable on iTunes. I get 2 error messages. One says, "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." I also get an error when trying to import photos (just to try it out). The other error message says, "The iPad cannot be sync because this iPad cannot be found."
And so, I unplugged it and plugged it back in and I get the same response. My iTunes is the latest version.
I don't have warranty on this iPad and I spent like $500 on this one. I'm kinda worried...?
Any kind of response would be appreciated....

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

WLan connected, iPad and iPhone internet ok, iMac not working after trying everything (manual ip etc...)

I am quite new with a mac computer. But i think i nearly tried everything, i have no idea what else could help...
My iPhone and iPad are working perfektly in the wlan. My iMac works very rarely. Yes it worked once by manual ip, but later it did not work again.
Wlan always works (sometmes it takes a few seconds until thesymbol is fat, mostly it starts with "no internet")
I tried so many things...
- manual ip found out by my windows pc
- $ in front of the password
- the apple faqs on the websites
Very strange, but i hope someone solved an comparable problem already ;)
Thx!

I had a surfstick before, does that influence the whole thing?
And another thing: in other wlans the iMac worked perfectly... Without any manual settings etc.
Anyone an idea?

Facetime, iMessage, and Mail not working after iOS 6.1.3 update

I've had my iPod touch 4th generation since Oct 2010 and never updated the iOS until very recently. Before the update, Facetime worked consistently and easily. After I finally got around to updating my iOS a week ago, my iPod has come into severe issues.
99% of the time, I cannot send or receive Facetime calls. If I try to make a call, it doesn't make the dial tone and eventually it just says "Connection Lost". Nothing happens if someone is trying to send me a call. I only Facetime with my boyfriend and his iPod hasn't changed since Facetime was last working. HIs other iPod is also updated with iOS 6.1.3.
I never used iMessage before the iOS update, but because it says on Apple support that it uses push notifications like Facetime does, so I tried it. Most of the time, I cannot send or receive messages. I rarely used Mail before the update, but I never had a problem with it. Now, when I enter my gmail password, it keeps saying my username and password are not correct, even though I haven't changed my credentials.
I only use my iPod for Facetime, iTunes, and Pandora. I don't need iMessage or Mail, but I am testing with those to see if this can help find the root cause of the problem. Pandora works smoothly so I know it's not a wifi connection issue. I have searched for remedies on end and tried:
1. Reset, turn off/restart, turn Facetime on and off, etc.
2. Changing the DNS server address to 8.8.8.8, which made Facetime work normally for one time and never again
3. Updating my Apple ID password online, then signing out and signing back in
4. Creating another Apple ID with my other gmail account. Maybe 1 out of 10 Facetime call attempts, I can generate the dial tone, but when my boyfriend clicks to receive the call, it says that I am unavailable. iMessage has about the same success rate. It seems when I miraculously can send or receive texts through iMessage, I can manage to get the dial tone when I try Facetime, though the call cannot go through.
This is of course extremely frustrating and I highly regret the update now. I was hoping for an improved iPod after the update, and now I have a near-dud! I did make sure to check my location and date and time, and both are correct (US, Central time). Any help would be greatly appreciated. Thank you.

I spoke too soon. I tried Facetime again last night and had the same problems. Another factory reset did not work. I think it may be time to just call Apple support.

Port Forwarding not working after 7.7.1 Firmware update

I bought the new 6th generation Airport Extreme today, and after I set it up, everything worked great. I have a VoIP phone that needs to have traffic on port 5060 forwarded to it, and that worked just fine as well.
However, I then updated to the 7.7.1 firmware, and the port forwarding stopped working. I tried a hard reset of the Airport and re-entered all the settings, but it still didn't work. I spent about 30 minutes on the phone with 2 Apple support people who tried hard, but couldn't help. They also couldn't find a way to download the 7.7 firmware, so there was no way to downgrade. They suggested I go back to the store and exchange it for another one, which I did, and now it all works again.
Has anyone else had issues with port forwarding on 7.7.1? I'm just wondering how I'll ever be able to update the firmware, since failure means having to get a new Airport.

Huh,
turns out the problem went away with another restart of the Mac Mini. I'm still uneasy about it though, as I do not understand how it went from working to not-working over night in the first place. But, at least for now, the problem seems gone.
Thanks for commenting.
Cheers
Niels Olof

Sound not working after 10.9.4 Mavericks Update - HELP!

My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Before anyone asks, no its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.
I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.
Any help is greatly appreciated!

So I had the same problem; Actually other problems occurred after upgrade 10.9.2 (Thunderbolt related issues) and now after upgrading to 10.9.4 my internal sound disappeared.
The solutions described above made it worse; Sorry sykosoft .. but your solutions is even dangerous ;
I spend almost a Day finding out how to restore my internal audio devices ..
So what I discovered, this is a software issue;
Update on update on update without any clean install resulted in some filty .plist files
com.apple.audio.DevicesSettings.plist
com.apple.audio.SystemSettings.plist
looking in those files I discovered some settings pointing towards RabbitEars .. perhaps I tried it once in a previous life but now I do believe the upgrade took by incident the wrong 'device' as standard ..
So I looked up and the only thing I could do was finding .kext and other related stuff .. only able to remove it commando wise = terminal
after rebooting for the 722th time performing a SMC and PRAM for the 666th time the result was ... NO STANDARD devices detected
THe only solution working is :
A recovery install;
https://www.apple.com/osx/recovery/
In my case I encountered a problem; My recovery failed (reboot press and hold CMD+R, selecting install fresh OS X)
I find out it was due to my FileVault encrypted HD; So first I uncrypted (switched off FileVault) my HD, and even created a USB recovery disk (not needed)
Tadaaaa 45 minutes later all problems solved, without loosing data or reinstalling all programs ..
*feeling relieved* I thought sharing my pain and solution would save you hours finding out how to repair, hoping PRAM and SMC reset would solve it ..

Earbuds with Mic and Skip Functions not working after IOS 6.0.1 update?

I have earbuds with a mic and skip buttons functions and noticed that mic and the skip music functions stop working after updating to IOS 6.0.1. Now when I talk on the phone the mic on iPhone itself is working and not the mic on my earbuds. Also when playing music he skip functions has stop working. Has anyone noticed these problems?

Phone restart > if that doesn't work then do a reset of the settings. Full restore would be the last option.

Lighting cables and adapters are not working after the last iOS 7 update.

Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

I had the same bug. Powering off the phone and back on resolved the issue

Mac mail not working after OS 10.9.5 update

I have the same problem as other users.
Since last update of the OS to 10.9.5, the MAIL app does not send email.
It just does a few times a day, on and off.
I tried to take all accounts offline and then take all accounts online again, so many times, does not work.
I tried to reboot; does not work.
I tried deleting my accounts and creating them again, does not work.
I started to like that app, makes me sad to see how bad it got this week.
Does anyone know what is going on??
MacBook Air, OS X Mavericks (10.9.5)
HELP!
Re: Mail app drives me crazy, does not sync since last update 10.9.5

On and Off, that's the reason I am 100% convinced it is a software update issue.
It seems that Mail does not connect to servers as it used to.
Sometimes it would work great for a while, and turn back down again for no reason.
Apple will not read those comments as it is a place for mac users only. The only thing we can do is send 1 email per day, that's what i am doing, to "Provide Mail Feedback" in Mail on the bar to complain so they hear about the problem and try to solve it.
Any mac user of the community could help, apart from saying just do not use this app anymore?

Black ink not working after my computer did an update (2 new cartridges put in)

Black ink stopped working suddenly. Tried 2 new cartridges and they did not work. Since the day before their was an automatic 'updates' on my computer I thought it was that, but making copies doesn't work either. I already cleaned the print heads with still not even a hint of black ink coming out.
Usually, when the ink gets low it will be light at first or streaky . . . not just none at all. Could the update been a problem?

The update is likely not related. I would suggest going through the troubleshooting steps in the document here. Be sure especially to check the vents as shown in solution six. If the steps there do not resolve the issue soaking the printhead as shown in the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

USB ports not working after OSX 10.9.1 update

I have a late 2011 MBA 13".
The 2 USB ports stopped working as soon as I updated to 10.9.1.
I tried zapping PRAM and resetting the SMC.
I even turned the thing off for hours and still nothing.
Any idea how to fix?
Everything was fine until I did the update.
Thanks.

This is not a known bug affecting 2011 MBA computers with 10.9.1 so there is something wrong with your installation. Since zapping PRAM and resetting the SMC did not work I suggest that you try one of two things but first make sure you have backed up your computer.
1) download Mavericks and reinstall it. Sometimes an update goes awry and a reinstall fixes it. Since doing this won't disturb any of your data or applications it would be my first choice. You'll be downloading 10.9.1 so you won't have to perform any updates.
2) boot into the recovery mode, erase the hard drive and then download and install Mavericks. Once Mavericks is finished installing you'll be asked if you'd like to migrate data and applications from a backup. Say yes and if your backup drive isn't already connect it, do so. Select your applications folder and account folders from the list and let the Setup Manager do its magic.
BTW - this is why one of my several backup hard drives is a cloned backup using Carbon Copy Cloner (SuperDuper! Is another good choice). I can boot up my computer using this backup and download the newest version of Mavericks on it if I haven't already done so. I always quit the installer first and make a copy of it because the installer program deletes itself once it is finished which is something of a pain. It gives me more options including being able to boot my computer with it, erase the computer and copy the installer to the computer rather than having to perform the download all over again if step 1 fails. Since I always download a new copy of the OS when Apple releases an update this computer will have the newest version of the installer so I also can skip the download step of option 1 and just copy it over and install on the computer.

Battery not working after Apple software EFI firmware updated

Hi, My Macbook Pro (C2D 15inch 2.5GHZ) battery stop functioning after I applied Apple software EFI firmware update.
I'm using Newtech NuPower® (High Capacity) branded battery.
Problems after applied EFI update;
- Battery not charging
- Indication dispalays 0%
Anyone having a same issue?

OWC responsed tonight that they will replace my battery.

Exhange 2013 not working after trying to apply cumulative update 6

Similar Messages

Maybe you are looking for