Existing ATT Customer going from 3G to 3GS: activation problems

I know this isn't an Apple issue (it's A "No MMS and Tethering" T&T's problem...). But thought I'd check here to see if I am missing something.
I popped my old SIM card (from my 3G) into the new 3GS phone. For a while the "activating phone...this may take some time" message was there. After I synced my data, music, etc, the message disappeared. Now there's just " _ _ _ _" where the ATT signal logo usually is.
Is there something else I need to do, or just wait?

The new phone came with a SIM card. Use that one per:
http://support.apple.com/kb/HT2109
Phil

Similar Messages

Existing ATT customer - upgrade to iPhone without data?

I'm not sure what's stopping me from doing this, so I'd like to bounce it off of you guys. My friend is upgrading to a 3G and will sell me his 2.5G iPhone very cheap. I'm on a family plan for ATT and currently have a Razr.
I've popped my SIM card into his 2.5G phone and it works fine -- I can place and receive calls. Naturally, what worries me is the EDGE connection, as I don't have any kind of data plan.
If I continue to use the iPhone, I assume I'll get hit hard with charges for things like email/stocks/weather which will continuously use the EDGE network even when I don't want to. If there's someway to disable that, and just use wifi (I have it everywhere) that would be optimal. I don't mind losing visual voicemail or anything, it's just an opportunity that's tough to pass up since he'd be selling me such a nice upgrade for so cheap.
I've looked online and found an add-on called Services.app which will disable EDGE, but I'm not sure if this is effective or necessary. Can anyone shed some light on this situation?

I think I get the jist. My mom (who purchased the phone as a gift) said she was told that the extension will go on for my number however at the end of her original two-year agreement she will be able to take advantage of upgrading her phone while my upgrade is technically being triggered now (AND A **** OF AN UPGRADE AT THAT, if I do say so myself ;))
Merry Christmas everyone and thanks for the past and future help

Would going from xp to vista cause problems?

I have a 2nd gen nano that was set up on an old pc running XP.
I have now backed up my library on to an external hard drive in order to use the nano with my daughter's new laptop (which runs on Vista).
This is all working fine, but when I sync the nano on the laptop, an error message comes up at the end saying " do you want to scan and fix this i pod? there might be a problem with some files on this device or disc". it then recommends scan and fix, but when i click to do this another message comes up saying " the disk check could not be performed because windows cannot access the disk".
It syncs fine but the message comes up every time i connect the i pod!
Could this be anything to do with the change between xp and vista?
help!!!!

Router has nothing to do with the operating system.If the router is configured then,you do not need to do anything on the router.Just connect the computer to the router and it will work.

IPone 3GS activation problem and IPhone 4s restoring error 4005

I upgraded my 3Gs software from 5 ro 6 but I can't activate it can't find SIM always says NO Service
And I've IPone 4s I restored through Itune but it Can't be complteed error occurred 4005
please help me to solve these problems

Posting more than once makes things much too confusing for anyone trying to help; I've asked the hosts to remove the duplicate.

3gs activation problem

upon restoring my iPhone 3gs, when I go to activate it, it comes up with the following error message, "your iPhone could not be activated because the activation server is temporatily unavailable…
Any help as to activating it?

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

Is itpossible recover BPM Object instance from Screenflow in Grab Activity?

My process has two roles: role1 and role2.
role2 has an activity of type "Interactive" and the implementation type of this activity is Screenflow, in this Screenflow I have an instance variable of the type BPM Object.
role1 has a Grab Activity from Interactive Activity that describes above, the Grab Activity has a unconditional transition to another Interactive Activity and this Interactive Activity has the same implementation type of the Interactive Activity of the role2 and points to the same Screenflow.
I need to recover the values of the BPM Object that filled in role2, in other words, I need the same instance of the BPM Object in Interactive Acitivity of the role2 in the role1.
If an user filled a field called "name" of BPM Object in the Interactive Activity of the role2, it needs to see that value in the Interactive Activity of the role1 after grabbed this activity of the role2 to role1.
Is it possible?

Hi,
Sure it's just me, but I got a bit lost with the description of what you're trying to do. One place I got lost was in the discussion of roles. Roles are used in Oracle BPM processes for a variety of reasons, but I'm not sure they're germane to your problem so I'm trying to rephrase your question without their use.
Here's my attempt to rephrase what it is that I think you're trying to do:
1. I think you have two activities. I'm naming them "Check Credit" and "Final Check"
2. I'm guessing you have a transition between the two activities "Check Credit" and "Final Check"
3. Your process has an instance variable that is a BPM Object that I'm naming "customer". Since it's a BPM Object type, it has a variety of attributes (e.g. customer.name, customer.address, etc.)
4. You have a Grab activity that has its "Runtime" property set to be "Defined" (meaning you have transitions defined coming into and out of the Grab activity). I think you might have a transition going from the "Final Check" activity to your Grab activity and I think you might have a transition going from the Grab to the "Check Credit" activity.
Does this describe your process? I'm assuming you probably want to have the instance variable revert back to original values of the instance variable object before work was done in one of the activites, but don't want to head too far down this path until you confirm that this is what you want to know.
Thanks,
Dan

Going from iphone 4 to 3gs and applecare

Hi all,
I have a iphone 4 and bought a iphone 3gs brand new of ebay. Can I transfer my existing applecare from the iphone 4 to the 3gs once activated? I'm going back to a 3gs. I have my receipt and agreement number from when I bought the applecare.
Thanks
Larry1335

The process to transfer Applecare is written in the agreement, from the US Applecare terms & conditions:
Subject to the restrictions set forth below, you may make a one-time permanent transfer of all of your rights under the Plan to another party, provided that: (a) the transfer must include the original Proof of Purchase, the Plan's Certificate and all of the Plan's packaging material, including printed materials and these Terms and Conditions; (b) you notify Apple of the transfer by sending, faxing or e-mailing notice of transfer to Apple Inc., ATTN: Agreement Administration, MS: 217AC, 2511 Laguna Blvd, Elk Grove, CA 95758, U.S., fax number 916-399-7337 or [email protected], respectively; and (c) the party receiving the Plan reads and agrees to accept the Terms and Conditions of the Plan. When notifying Apple of the transfer of the Plan, you must provide the Plan Agreement Number, the serial numbers of the Covered Equipment being transferred and the name, address, telephone number and email address of the new owner.

How to invoke ADF custom application from existing R12 EBS application

Hi Guru's,
We have a requirement to invoke ADF custom application from existing EBS R12.1.3 application.
Is there any documentation provided by ORACLE or any online help on how to integrate/invoke ADF pages from existing EBS application?
And can we pass any EBS session level parameters like(user info, language, operating unit etc) to ADF layer while invoking the ADF application?
I have thoroughly searched the forums and got some info related to JAAS security links and all. but i am looking for exact integration specific steps.
Any help in this regard is a great help!!
Thanks alot for your help!!
Subba.

lets raise your question over here
JDeveloper and ADF
Thanks
vamshi.

How do I send ATT Customer Service a Personal Note?

Hello, !
Thanks for posting. If you need help with an account-specific issue, please click here to send us a private message with your contact information, the best time to reach you, and a brief summary of the issue.
You can expect a reply within two business days, so keep an eye on the little blue envelope icon in the top right corner of your screen. In the meantime, feel free to message me with any other questions or concerns.
-Mariana

I posted a private note and I got some crazy response about me switching wifi channels at home so my phone doesn't switch to mobile data. It didn't make any since to me. I'm not tech support. This is my problem below and it hasn't been resolved. I got a $20 credit and this issue has used up all my data for the entire billing cycle!! I'm really frustrated by this entire situation.
I just received an email from ATT stating that my data usage ;reached 75% and I have 20 days left in my billing cycle. I call ATT Wireless, and stressed that both phones was at home and connected to WIFI (I am paying for ATT wireless internet service for 5 devices at home). I was told by the Wireless rep that my IPhone switches from WIFI to mobile data when the WIFI signal is weak. She told me to call ATT Internet. I made that call and was told that my Wireless signal was being interrupted by my neighboor's wireless signal; both wireless was using the same channel. He switched me to a different channel and rebooted the internet box. I was advise to turn my Cellular data off when at home and back on when I leave the house, so this won't happen again. Now, since my WIFI was dropping (without me knowing it; my phone still showed is was connected to WIFI) my data usage is very high and I only have .8 gig left for the next 20 days. After complaining about having to eventually purchase more data, I was transferred to Collections to see if I could get a credit. Needless to say, they couldn't help me. I was told to call ATT Wireless again!!!
After telling the same story for a fourth time, I was given a $15 credit to offset the charge for 1 gig when I go over the data limit. I was told that I now have to manage that 1.8 gig for the next 20 days, by turning cellular data on/off and logging into my account to make sure I am not going over my limit! 75% of data was used at no fault of mines, but I am inconvenienced. When my home wireless drops, I get screwed. I have been a long time ATT customer, but this is making me rethink my relationship with ATT. This company has these two divisions that do not talk to each other and the customer suffers! I am very frustrated with this entire process.
How do I escalate this issue, so it doesn't happen again?
Quint

Customer replication from R/3 to CRM as BP's in install at role

Hi experts,
Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. Can anyone explain me the steps clearly for creating the BP's in CRM correpsonding to the R/c customer. I don't want to replicate them as BP's in ECC.
Thanks
Santosh

>
Santosh Kolleti wrote:
> Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
> Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
> interruption and has therefore been terminated."
> Information on where terminated
> Termination occurred in the ABAP program "SAPLSMO0" - in
> "SMOF0_READ_SMOFOBJECT".
> The main program was "SMOF_DOWNLOAD ".
>
> In the source code you have the termination point in line 58
> of the (Include) program "LSMO0U06".
> Do I need to download anything else before doing the customer download from ECC to CRM.
>
> Can anyone help me fix this issue.
Hi,
You have done important steps.
You have to check all relevant functional modules are available in the table.
Then,you have to maintain/delete entries based on standard document.
Make sure all Queue is available with system users,right RFC and the queue is registered.
Make sure all the RFC connections are created and working properly.
You have to generate the objects.
Please check some of the above steps .
Regards,
SSN.

Customer replication from R/3 to CRM as BP

Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated."
Information on where terminated
Termination occurred in the ABAP program "SAPLSMO0" - in
"SMOF0_READ_SMOFOBJECT".
The main program was "SMOF_DOWNLOAD ".
In the source code you have the termination point in line 58
of the (Include) program "LSMO0U06".
Do I need to download anything else before doing the customer download from ECC to CRM.
Can anyone help me fix this issue.

>
Santosh Kolleti wrote:
> Customer's already exist in our ECC system. In CRM, we need to create the ECC customer;s as BP in install at role. From some ot the previous threads, I found that PIDE transaction can be used. I assigned the customer account group classification to BP and to test the replication added a filter in R3AC1 transaction to pick only one customer and run the initial load transaction R3AS, system goes into infinite loop and I had to kill the simulation run.
> Error is " The program "SAPLSMO0" has exceeded the maximum permitted runtime without
> interruption and has therefore been terminated."
> Information on where terminated
> Termination occurred in the ABAP program "SAPLSMO0" - in
> "SMOF0_READ_SMOFOBJECT".
> The main program was "SMOF_DOWNLOAD ".
>
> In the source code you have the termination point in line 58
> of the (Include) program "LSMO0U06".
> Do I need to download anything else before doing the customer download from ECC to CRM.
>
> Can anyone help me fix this issue.
Hi,
You have done important steps.
You have to check all relevant functional modules are available in the table.
Then,you have to maintain/delete entries based on standard document.
Make sure all Queue is available with system users,right RFC and the queue is registered.
Make sure all the RFC connections are created and working properly.
You have to generate the objects.
Please check some of the above steps .
Regards,
SSN.

Business partner ######### does not exist as customer, change not possib

We are in the process of upgrading from CRM 4.0 to CRM 7.0
I am currently testing our DEV system (that has been upgraded) and have found the following issue:
When I create a customer in transx BP the customer is not going through to R/3 - this is the case for all roles, even when ALL data is completed that needs to be there for masdatory fields in R/3
In SMW01 the BUPA_MAIN is set to green but but is not sent to R/3, when I look into the Error Segments there is an error stating that - Business partner 0005074626 does not exist as customer, change not possib
Does anyone know what this means or how to fix the problem
Regards
Barry

Arup
I have checked all the mapping and all is ok.
When a BP is created in transx BP as a 'Business Parter (GEN)' role it
saves OK but when you change, or extaend into another Role,
say 'Prospect' and update the classification etc there is an ERROR in
SMW01 stating:
'Business partner 0005074628 does not exist as customer, change not
possib'
If a BP is created in the Prospect Role all is well, the issue is with customers that are created in BP GEN first, we have thousands that are created in BP GEN then extended when they need to go through to R/3 for sales processing
Regards
Barry

Going from EHP3 to EHP4

Experts,
We already have ECC6.0Ehp3. After installing EHp3, we activated 2 business function sets in SFW5 and followed the normal processes to get this moved into the other clients. No problem!
That was many months ago. now, we are ready to do Ehp4 and that is my question.
Knowing that we are already on EhP3 and have already activated business function sets, eg ISU_UTIL_1 / ISU_UTIL_WASTE, etc.
So once we finished the install of EhP4 via the Enhancement Pack installer, will we need to go back to SFW5 and activate business function sets again? We already have all the functionality we need from when we did the SFW5 after EHP3 install, I don't want to activate anything new, but I wonder if that is a requirement when going from one EHP to a new one? If so, how do we keep from overwriting the config we already have?
I have fully read the following guides:
Note 337623 - Customizing after installation or upgrade
The specified item was not found.
https://websmp202.sap-ag.de/~sapidb/011000358700000931872009E.PDF
https://service.sap.com/erp-ehp
https://service.sap.com/ehp-inst
But I still don't have an answer from these. Any insite would be much appeciated.
Thanks,
Nick

Hey Sunny,
Thanks again for following up, but I have seen this and fully read the note. Let me be more specific:
Is there any one out there who has applied a previous ECC Enhancement Pack (like EHP3, then activated a business function set in SFW5 (like IS-util), then copied the customization to all clients....and THEN at a later date applied EHP4 ???
If so, after applying EHP4, did you AGAIN have to go into SFW5? If not SFW5, did you have to use SCU0 to find additional features from existing business sets in client 000 and again copy that into the productive clients?
I know what the ambiguous documentation says, but when it comes down to REALLY doing this, I am still not clear. Please don't bother cutting/pasting sections from the tech guide and SAP note I have already referenced in a previous post. I have ready them....
Maybe I'm over-thinking this.....
Also, what if I wanted to activate a complely new business function set? After activating in SFW5, has anyone done this in a way that copies the new functionality in 000 but does not stomp on the previous customization from other activations?

Unable to Transfer Customer Masters from feeder system to GTS!

Hi all,
I am facing a problem in transferring customer masters from ecc to gts. The RFC's are working properly (i.e Material Masters are getting transferred properly) but customers are not going. When i go to slg1 it is giving me a display log message as "No Customs Business Partner exists for partner" and when i go to legalr3 it is saying 0 were processed when i am trying to transfer a list of customers. The basic config has been done ie org structure, doc type mapping, item cat mapping, and the necessary compliance config...
Would appreciate if you could provide some help here?
Thanks,
Raj Mohan

Hi Raj,
As you have already mentioned that RFCs are working fine, However To be on safe side, I will recommend to check the basis setting again.. Please follow the steps below and let me know if it helps.
R/3 client:-
Please make sure that there should be no change in Logical naming of the R/3 client (scc4)
RFC Destinations are maintained properly for RFC Calls. Please check their rfc username and password. (sm59)
RFC Destinations are maintained correctly for Method Calls (bd97)
ALE Distribution Model is set up correctly (bd64)
Change Pointers are activated globally
Change Pointers for Message Types are correct
it should be
Customer master    /SAPSLL/DEBMAS_SLL
Vendor master     /SAPSLL/CREMAS_SLL
Material master   /SAPSLL/MATMAS_SLL
GTS client:-
Please make sure that there should be no change in Logical naming of the R/3 client (scc4)
RFC Destinations are maintained properly for RFC Calls. Please check their rfc username and password. (sm59)
RFC Destinations are maintained correctly for Method Calls (bd97)
Feeder system definition is correct in your Logical System Group (spro)
And also as Shruti mentioned. go to st22 and check if there is any abap short dump error. If you have any error there. Post it here...It may help to understand the problem more closely.
I hope that this may help...

Voice Memos not syncing from my iPhone 3GS to my MacBook Pro. Sync music is ticked in iTunes along with include Voice Memos box

Hi, I am trying to get my voice memos from my iPhone 3GS to my MacBook Pro via iTunes and it is not working. I have ticked sync music in the music tab of the iPhone device and the include voice memos box is also ticked. So, apparently this should work, but there is no sign of the voice memos in iTunes or in the iTunes folder in the finder window. Any ideas much appreciated! :-) Thank you.

I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1

Existing ATT Customer going from 3G to 3GS: activation problems

Similar Messages

Maybe you are looking for