Existing condition assignment to New GL

HI Experts
My user requirement is to have a new GL for a condition, this condition used to calculate wastage by different companies (co. Codes) at present this condition assigned with accounting key(aaa) to other income GL Ex: xxxxxx now they want to assign this condition to new GL Ex: yyyyyy. Under one co. Code(2333) how to achieve this.
The pricing procedure is global (used by different co. Code in one company)where the requirement from one company (co. Code) only. The Present GL is used for Other income where total 16 conditions assigned to this GL. My question is if I assign this condition to another GL is there any discrepancy will occur.
Regards,
MH

The pricing procedure is global
No it is not possible to address this requirement. Either you have to add this logic in your existing routine or go for related billing exit.
thanks
G. Lakshmipathi

Similar Messages

Add a new field to an existing Condition table

How can I add a new field to an existing condition table?
I have table 971 and I want to add INCOTERMS (INCO1) to this existing table but do not see how to add it.
Thanks

Hi Vicky,
I dont think you can add new fields to the condition table once you have activated the condition table.
SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
Please refer to the below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
Hope this helps.
Regards
Raj

Adding new field in an existing condition table

Dear friends,
I have an existing condition table for material exclusion with the combination of Plant and material.
Is it possible to change this table and add a field of division also?
Regards,
Ronnie

Hi,
The optimzed solution is to better create a new sequence of fields including the division, so that a new condition table is created based on the key combination or access sequence.
You can add a new field to an existing condition table using APPEND structure facility in Se11. But once on activating the table, how will this division field get populated in the table.
But whereas if you create a new key combination, the data for this condition tables will automatically gets filled up while creating master data thro VK11.
So, its better to go for a new access sequence combination
as a new table is created for this key combinations.
Regards,
JLN

Assigning of excess sequence to condition and adding New condition in Prici

Hi,
We have different pricing procedure for our baisc price present there is no excess sequence assign to it now as per our requirement i have created a new contion table and have assign that to a excess sequence I want to know is there any problem if i assign that Access sequence to conddition what can be the problem ,
and 2nd case
I want to create new condition what is the total process to assign that new condition to our exsiting pricing procedure.
regards,
zafar

Dear Friend,
there is no problem when you assign the access sequence to the condition at the time you are going to maintain the condition in MEK1 transaction it will ask the different combination
for example material /vendor combination, or material plant combination, or else what accesses your maintained for that access sequence it will ask
in the case of maintaining the conditions in the pricing procedure check the on what the value has to be calculated which step and which counter your assigning the condition based on that it will calculate the value for that condition
Regards
Pramod

Modifying Existing Condition Routine

Hi All,
In Customer Return when we create Credit Memo Request wrt invoice the tax amount (CST/ VAT) is copied.The requirement is that if we create a Credit Memo Request wrt Invoice which is 6 months old from the current date then Tax condition types should not be copied. For this we can create Routine and assign this in the PP in Requirement field.
But as we maintained requirement 10(plant is set) for tax condition types, so where to assign this new routine.
Can we add the logic in the existing routine 10 ?
Regards
Debasish

Hi,
There is no way we can assign two routines in a requirement. Rather you can have the logic in the existing rouitne.
Thanks,
Raja

Copy an existing condition record

Hi experts!
Kindly let me know the steps to copy an existing condition type to a new one and assigning the new one to a pricing scheme.
Thanks
Vineeta

Hi,
transaction vofm.
menu...conditions/pricing.
If you overwrite an existing number, the system will automaticly copy it to the new one. You need an object key for this.
Don´t forget to run report RV80HGEN, after you set it into customizing and want to use it.
Regards
Nicole

How to copy existing query report into new query report in SQ00

Hi Experts,
Hi Experts,
I want to add fields "company code" "'region" to existing query report AQZZ/SAPQUERY/FKF1============
(list of vendor address) for this i done as following:
1.In SQ01 go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
2.I typed F1 in query field and click change button
3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing query report into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK i am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
please help regarding this which should be very beneficiary to my carrier.
Regards,
naresh

Hi Experts ,
I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
Regards,
naresh.

How to point an existing query into a new cube?

Hello Experts,
For a Business requirement, I had to create a new cube.
Now, I wanted point out all my existing queries to the new Cube.
Can someone please tell me how to do it?
Point will be assigned for useful information.
Thanks
kumar

Hello
I Don't want all the queries to be copied to the new cube.Can we specify the query names in the transaction?
It may be a dumb question but, can we the same for workbooks as well?
Thanks
Kumar

'Order By' in Exists / Not Exists condition causing ORA-00907 in Apex4.1.1

Hi Guys,
We have just upgraded from apex 3.2.1 to 4.1.1. on Oracle DB V11.2.0.1, while testing the apps in apex, I come across this problem.
When I have a page process that has a condition defined.
When Condition Type is Exists (SQL query returns at least one row) or Not Exists (SQL query returns no rows) and the Expression 1 is a query with an 'Order By' clause, e.g.
SELECT 123 FROM DUAL
ORDER BY 1
When the process is triggered, Apex 3.2.1 would evaluate the condition and run the process just fine, however Apex 4.1.1 would throw an error : ORA-00907: missing right parenthesis
I totally understand that an Order by clause in an Exists or Not Exists condition is unnecessary and agree that they shouldn't be there in the first place.
But unfortunately I am dealing with other developers codes and these conditions have been coded like these, probably from copy & paste codes.
Saying that, I also believe that an Apex upgrade should not stop anything that is working in previous releases without warning or provide a workaround, right?
I don't know if this affects other types of artifacts that can have a condition in apex when upgrading from 3.2.1, e.g Regions/Items/Computations/Validations etc.
Does anyone else get this behaviour? and is there an easy solution to fix these?
Ideally I don't want to go through all processes (and whatever other artifacts might be affected too) in all apps in all workspaces to check the condition type and remove the 'Order By' clause manually.
Thanks for any advises
Just did some more testing
'Computation' , 'Validations', 'Processes' and 'Branches' have the same problem, 3.2.1 takes 'Order By' fine in Exists/Not Exists condition, but 4.1.1 throws error.
'Regions', 'Buttons', 'Items' have consistent behaviour - both 3.2.1 and 4.1.1 throw error ORA-00907: missing right parenthesis, when page is rendered.
Edited by: Danny on 25/04/2012 20:07

Hi Danny,
that's interesting. I just had a look what happens when you use an EXISTS or NOT EXISTS condition type. The following final SQL statement will be generated with your above example. You can also see that if you run your application in debug mode.
select count(*) from sys.dual where exists (select 123 from dual order by 1)Executing that statement in SQL*Plus will also show the ORA-00907 error. It appears that the SQL parser doesn't allow an order by clause in an EXIST clause.
I wonder why this should have worked in previous versions, but I can only suspect that in the past we may just have executed
select 123 from dual order by 1which can be slightly slower because with the new EXISTS statement the SQL engine can stop processing earlier if it finds a record.
We try to be backward compatible as much as possible, but I doubt that we will change that back to the way it was before because of the performance penalty 99.9% of our customers would face.
Possible Workaround: You might be able to use the new "Application Search" to scan your application for "order by" and fix it for all hits where the attribute name is "Expression 1".
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

How to add a feild as key combination for existing condition table

Hi all,
please any body can inform me about how to add a feild as key combination for existing condition table ex 901 having the key combination of sales organisation and material
for this cond. table,how to add a new feild ex:price list
iam unable to add it in change mode of v/03.(even after removing this 901 table from Acc.seq.)
Edited by: rajendraprasad vasam on Apr 25, 2008 10:08 AM

mr.Rajendra
I you have the access key - you can copy the 901 table and create a new table along with your required field. v/03
Or
in the access sequence for the condition type - add 1 more step and add your field.
ie 10 - 901
and in 20 - your required field
regards,
Reshmi
Edited by: reshmi bhaskar on Apr 25, 2008 10:21 AM

CUP - No control of existing user for a new account request

Hello everybody,
I have an issue with CUP tool.
When you want to create a new user with a new account request and the user ID that you specified is already used in the backend system (user already exists), there is no control in CUP and the provisioning is done. Only a short and wrong error message appears after provisioning in Audit information part of the global review screen. This message is: Provisioning failed, user already exists, but, however, CUP assign the new roles to the user.
Do you know a way to solve this problem?
For information, only the reciprocal issue is managed by CUP: if you try to change a user that doesn't exist in the backend system, CUP propose you the parameter Create user if it doesn't exist in the auto-provisioning section of configuration tab.
Thanks in advance for your help.
Best regards,
Wassim BEN MANSOUR

Hello Ben,
This is one of the requests which should and i guess would definately be taken up by SAP for it's next versions as an enhancements. Since the tool does not have the correct procedure, as it should be, in place; what I can suggest you as a workaround is to have a manual step in between, when the request for a user creation comes.
This step would involve the task which is to be carried out by the Security guy to manually look if the user ID requested already exists, for every request for User ID creation. This looks a tedious task but considering this can lead to more trouble than actually performing it, untill it is rectified; we need to be careful with this.
Regards,
Hersh.
http://www.linkedin.com/in/hersh13

Programmatically add an existing task assignment to resource timesheet

hello forum members,
I am working on code that creates tasks for a project, assigns resources to task and then adds that tasks to resources timesheets so that they could log time against it.
Can you anyone recommend any code samples or link references on how to add an existing task assignment to a resource timesheet?
tatiana
tatiana

Hi Tatiana,
Check following code sample (PSI):
WebSvcTimeSheet.TimesheetDataSet dsTimeSheet = SvcTimeSheet.ReadTimeSheet(<TimesheetUID>);
WebSvcTimeSheet.TimesheetDataSet.LinesRow newLine = dsTimeSheet.Lines.NewLinesRow();
newLine.TS_LINE_UID = Guid.NewGuid();
newLine.TS_UID = <TimesheetUID>;
newLine.TS_LINE_CLASS_UID = TimesheetConst.const_StandardLineClassGuid;
newLine.TS_LINE_VALIDATION_TYPE = (byte)TimesheetEnum.ValidationType.Unverified;
newLine.TS_LINE_STATUS = (byte)TimesheetEnum.LineStatus.Approved;
newLine.PROJ_UID = <ProjectUID>;
newLine.TASK_UID = <TaskUID>;
newLine.TS_LINE_CACHED_ASSIGN_NAME = <Task Name>;
newLine.TS_LINE_CACHED_PROJ_NAME = <PROJ NAME>;
newLine.SetTS_LINE_COMMENTNull();
dsTimeSheet.Lines.AddLinesRow(newLine);
SvcTimeSheet.PrepareTimesheetLine(<TimesheetUID>, ref dsTimeSheet, new[] { newLine.TS_LINE_UID });
Guid jobUid = Guid.NewGuid();
SvcTimeSheet.QueueUpdateTimesheet(jobUid, <TimesheetUID>, dsTimeSheet);
Make sure you have the Microsoft.Office.Project.Server.Library referenced in your project.
Hope this helps

Number ranges for orders - divide an existing one/ add a new one

Hello,
following two problems:
- We have an CO order number range from 4000000 to 4999999; these range is used for quality orders as well as maintainance orders (two different order types): Is there a way to divide this number range into 2 (so e.g. 4000000 - 4499999 and 4500000 - 4599999).
- In addition we have to add a new number range for a totally new order type. Unfortunately I don't find any possibility to add one to the existing ranges (T-Code KONK/ Customizing) - where can I do this?
Thanks a lot in advance!
BR,
hansi

Hi,
In other words, you want to maintain number ranges as:
4000000 - 4499999 : Quality orders
4500000 - 4599999 : Maintenance orders
You can split the number range into two by changing the existing 'To number' from '4999999' to '4499999' and creating another number range for 4500000 - 4599999. Now, it is a question of unassigning Maitenance order type from numer range1 and assigning to new number range (4500000 - 4599999) which I don't think is possible.
As regards, creating new number range: KONK> Maintain groups (F6) > Group > Insert (F6)..give a text to the number range group and assign the number range. Once you have created the group assign your new order type to this number range group.
Hope this helps.

Assign a new Host before a Conference starts

Is there a way, either by the host or under system admin, to assign a new host before RTC allows users to join a conference (i believe, its 15 minutes before the start time), without having to setup a new conference?
We did a workaround where the host (couldn't make the conf) changed the start-time to an earlier time, joined with the new host, and then did the 'Assign as Host'. The new host stayed connected, until the actual start time of the conference (an hour later).
Any suggestions would be much appreciated.

If you can check and modify ABAP logic in your report, would this be an option: (if you can't modify logic then make sure corresponding sentences exist within the logic).
Define in your report logic this macro:
define rp_set_name_format.
** BEGIN VALID <L9C
* rp-set-name-format.
** END   VALID <L9C
** BEGIN VALID >L9B
data: l_repid like sy-repid.
l_repid = sy-repid.
call function 'RP_SET_NAME_FORMAT'
       exporting
            repid   = l_repid
       importing
            format = $$format.
** END VALID >L9B
end-of-definition.
At START-OF-SELECTION event add "rp_set_name_format." sentence or alternatively use standard macro RP-SET-NAME-FORMAT (effectively eliminating the need for the above define-end-of-definition context.
At GET PERNR event add "rp-edit-name p0001 p0002 "molga" space." sentence where appropriate replacing molga by your actual country grouping value.
The call to rp-edit-name macro has to be defined this way:
* PARAMETER IN: P0001 (DEFAULT: ENAME)*
*                P0002 (DATEN ZUR PERS)*
*               <P0021 (FAMILIE-DATEN)>*
*                MOLGA (T001P-MOLGA)   *
*                LANGU (ANREDE-SPRACHE)*
* PARAMETER OUT: $EDIT-NAME            *
*                $RET-CODE             *
Regards,
Antoine

How do I assign a new Apple ID to iPhoto?

It all began back in 2010 when I bought a used PowerMac G5 to see how I got along with MacOS. When I got it, the OS was already set up, along with a few Apps, such as iPhoto and iMovie. I didn't have an apple ID back then, and it didn't matter, because the OS running (Leopard) didn't require one. So I used the preinstalled iPhoto.
Then, in 2011, i scraped my money together, bought a MacBook Pro and used the built-in Mirgation assistant to get my documents and data there.
Since then I wasn't able to update iPhoto, because it probably was installed on the PowerMac with a different apple ID - and this information was transported over to my Macbook. The app store wouldn't let me install it with my own ID. And because I can't find a dmg for iPhoto, I can't just uninstall and reinstall it.
Now using a non-updated iPhoto wasn't really a problem - until now that Mavericks won't support this old version any more. And I can't access my photos any more.
So is there a way to assign a new Apple ID to iPhoto? Or to uninstall and reinstall it without losing any photos?
Because there is no way to get the ID from the company that sold me this Power Mac. I don't have any contact data any more...

To create a new ID see:
Frequently Asked Questions About Apple ID
Then either you can:
- erase the iPod (Settings>General>Reset>Erase all Content and Settings) and set it up as a new iPod with her ID
- Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>Game Center
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
You can also continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

Existing condition assignment to New GL

Similar Messages

Maybe you are looking for