Exit/Badi for to Stop PM Order Confirmation using IW41

Hi,
My Requirement is while doing PM Order Confirmation based on Order and Operation in IW41, system needs to check WBS element status.
If WBS element status is closed, It has to stop the Order Confirmation.
Kindly suggest any Exit or Badi for this.
Thanks in advance.
Regards,
Kumar

check below thread it has all the badis and exits summed up for iw41:
http://scn.sap.com/thread/1121303

Similar Messages

User exit / Badi for Account Assigned Sales Order billing

We are planning to collect the royalty in the condition type.We want to accumulate the condition in the Internal Order.After certain period we want to close the orders .Can any one suggest the Userexit / Badi for this type of Billing / Pricing
Thanks
Jeevan

Hello,
please have a look in the customizing transaction SPRO:
> SPRO
    > Sales and Distribution
       > System Modifications
          > User Exits
Here you can find the documentation of all Userexits for SD.
I hope that the information are helpful.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points

Exit or routine or BADI for save the sales order

Exit or routine or BADI for save the sales order.
Please give your input Asap.
Thanks & regards,
Vinayak More.

Hi Vinayak,
please go through the steps and u will be able to find BADI of any transaction.
&*************Reward point if helpful**************&
BADI Info:
Method 1:
Go to Tranaction: SE24.
open class CL_EXITHANDLER
Open the method " GetInstance"
Put Break point in the statement
call method cl_exithandler=>get_class_name_by_interface
Now execute the Transaction which you need teh BDC it will automatically stops at the the method. In debugging mode double click on the variable: " exit_name" It will return the BADI Name.
Method 2:
find the Package name and go to the tranaction SE84.
Enter the package name
inside the left navaigaiton panel there is one option " Enhancements" click on this enhancement and then enter the package name and execute it. you will get hte number of enhancement.

Looking for Exit/Badi for VA03 TC for blocking the sales order

Dear Experts,
I would like to know the user exit/badi for sales order(tc VA03)and program name:SAPMV45A
1)if the minimum order quantity is less than the order quantity.the order will block and in the second line item for the same material they are charging 100$ and then they will release. the existing logic is user dont want this now.
2)If a line item is created below the minimum order quantity, the order should get blocked and the user should get a warning message regarding the addition of ZMOQ condition type [u201C Line item Quantity is less than minimum order quantity, ZMOQ condition type is missing u201C
Please provide the exit name and provide some inputs.
Thanks,
V.V.

Hi Gurus,
I am trying to find out the exit for warning messages where the SAP has maintained.
whenever the salesorder creating if the order quantity is less than the minimum order quantity it will give two warning messages. 1.Take minimum order quantity 400 DEV into account in item 000010
2.Consider delivery unit 40 DEV in item 000010
so i want to add the third warning message for condition type is missing.
I am trying to find the exit in the program SAPMV45A and include names MV45AFZZ and MV45AFZB.
Please let me know if anyone knows the exit name. where the warning messages maintaining.
Thanks
V.V.

User-Exits/Badis for T.Code Co01 Production Order

Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........

These are the available user exits..
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User exit/BADI for Deleting the Empty Handling unit

Hi All,
Can anyone give me the suitable User exit/BADI for the below scenario.
While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
Thanks in advance.
Thanks
Ramesh.

Find below couple of User Exits for Transfer Order.
MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
The Exits gives you access to LTAK and LTAP.....
Hope this is helpful to you.
Vinodh Balakrishnan

Reg. Exit/BADI for changing item data of PO in ME22N

Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan K

Thanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header                              - im_header->get_items
2. Loop the item list and get the line item record   - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item                                       - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

In ME21N,User Exit/BADI for Defaulting Vendor number at item level.

Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji R

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

User Exit & BADI for controling the END user in co06

Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

User Exit / BADI for Transaction IW31 to create a POP-UP.

Hi,
I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

Hi!
In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
Regards
Tamá

User exit / BADI for billing block in VL01n

Hello Techies,
Through custom transaction we are creating delivery notes. We run a background job to pick up these delivery notes & create return deliveries using BDC call transaction method calling VL01N (We also create order of type return for same). Though i can not see any place where billing block is filled in custom program but still there are some deliveries with billing block. Could you please let me know if there is any User exit / BADI for billing block or any configuration setting for same?

Just to add more details:
Our program sets memory id field.
We call transaction VL01N.
program clears memory id field value.
all this happens in loop for number of deliveries.
In VL01 user exit overwrites LIKP-FAKSK value to 05. However we have written code here which imports value from memory id. by this we come to know that we have created this delivery using custom transaction & billing block should not be set.
From this we can conclude that only when sy-subrc for import memory id is not equal to 0 then billing block is set.
what could be the reason for sy-subrc for import memory id is not equal to 0 ?
can it be because of number of deliveries created at a time where memory id export / import is causing problem?
we are not able to replicate this issue in Dev/Quality systems.
Thanks & Regards,
Sachin

User exit / BADI for CO01

Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
Jijo

Exit Name           Description
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User Exit / BADi for TCode - IMA11 (Create Appropriation Request )

Hi friends ,
            Can anyone help me in finding the User Exit / BADI for Transaction IMA11 (Create Appropriation Request , Module - FI ).I want to create search help for field "Partner" in table control "Person Involved" present in this transaction.
Thanks in advance.
Regards
Nand Kishor

Hi,
The following user exits are available :
Exit Name           Description
AAIR0001            IM-IS: User value fields in app.req. reporting
AAIR0002            IM-FA: User fields for app. requests
AAIR0003            IM: Workplace assignmt when creating PM order from app.req.
AAIR0004            IM Drilldown: Definition of User-Defined Characteristics
AAIR0006            IM-FA-IA: Data Transfer from App. Req. to WBS Element
regards
Aveek

User Exit/Badi for VF01

Hi all,
I'm trying do find a user-exit/badi for t-code VF01, that allows me to change at the same time,some fields, of the header structure VBRK and items structure VBRP (all the items available). Until now, all the user-exits i've tried dont allow me to change both structures at the same time, neither badi (SD_CIN_LV60AU02). Regards,
PCastro

Hi,
may be you are trying to chage the some other BADI. to find the exact BADI, follow this procedure.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
if you follow this 7 steps, you will find a suitable BADI.
pl reward if it helps.
Thanks & Regards
Sadhu Kishore

Exit/Badi for to Stop PM Order Confirmation using IW41

Similar Messages

Maybe you are looking for