Exit related--- get points.

Hi all,
I found menu exit IMRC0002 for tcode-ik11. I did entries regarding menu text, icon etc..now i want to know what i need to put in the function module in order to synchronise the menu exit.
<b>go for points.</b>
Regards,
[email protected]

Hi
see this and do accordingly
refer
MEnu Exit
just refer to the link below for step by step procedure with screen shots
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
Select Enhancement components and choose Change.
The system lists all customer exits contained in the enhancements included in your project.
Place the cursor on the menu exit you want to add your own function to.
Choose Edit component.
The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
Enter the name of your menu function (such as Special order method) in the field New text.
Choose Save text.
Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
<b>Reward points for useful Answers</b>
Regards
Anji

Similar Messages

  • To get the user exits and modification points

    Hi Experts,
    I am able to find all user exits for a particular transaction,but is there a way to find it for some specific actions alone.
    Need to find the user exits and enhancement points that are called while clicking a specific button in a standard transaction.
    Your help is highly appreciated.
    Regards,
    Sridevi

    Hi
    To find out the userexits at position where you need you should see the description of the USER EXIT.If you find that it is close to the point where you want then put up a break point inside it and re - run the transaction.
    Also you can check SDN post to find out your user exit.
    FOR BADI -
    1 )You can put breakpoints at method GET_INSTANCE of class CL_EXITHANDLER and  CALL FUNCTION statements.
    2) You can run through SPRO transaction for the particular Functional area and understand the available exits or BADIs .
    Regards
    Gaurav

  • User Exit/BADI/Enhancement Point  in VF01 before new document no assignment

    Hi Expert,
       I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
    I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
    Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
    I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment.  Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
    Regards
    Swati
    Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

    HI Brad and team,
       BRED is right. I check few user exit normally all of us have that list or easily available on net.
    BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
    If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
    That why I need a User Exit/BADI/Enhancement Point  which trigger at save but before document no assignment.
    Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process."  .
    Suggest user exit USEREXIT_FILL_VBRK_VBRP  trigger before save. I need at save the reason is VBRK-FKDAT  this can be change.
    Feel free to contact me back if you need more clarification.
    Regards
    Swati
    Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

  • How to know whether a field exit is getting triggered or not??

    HI ,
    We are upgrading a system from 4.6 to ECC, the problem is that, in earlier system field exit was getting triggered but its not getting triggered in ECC, the field exit is active in ECC but still its not getting triggered.
    Field Exit is FIELD_EXIT_SAKNR.
    Please provide some help
    Regards
    Karan Arya

    Hi,
    As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
    Prefix: FIELD_EXIT_
    Infix: <Data element name>
    Suffix: _0 to _9 (optional), _A to _Z
    The interface is automatically generated during the creation of the function module, and has 2 parameters:
    Import parameter: INPUT
    Export parameter: OUTPUT
    After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
    If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
    If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
    Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
    As soon as you activate an exit, the corresponding screens are invalidated.
    Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
    Requirement
    Set the profile parameter abap/fieldexit = 'YES' before system start.
    Limitations
    The following ABAP statements are not allowed in the function modules of field exits:
    BREAK-POINT,
    CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
    COMMIT WORK, ROLLBACK WORK,
    COMMUNICATION RECEIVE,
    EXIT FROM STEP-LOOP,
    MESSAGE I, MESSAGE W.
    Note:
    Field exits cannot be edited with the debugger.
    You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
    Hope this helps you resolve your issue.
    Regards,
    Jayanth

  • User exit that gets triggered at the press of 'Enter' in IW42

    Hi,
    Is there any user exits that gets triggered at the press of Enter key in PM order confirmation IW42 transaction. Basically the requirement is to give a customized message at the order confirmation screen when the enter key is pressed.
    Regards,
    Prabaharan.G

    Hi,
    You may try the following enhancement points and exit respectively.
    CMFU0001        E            EXIT_SAPLCMFU_001
    CMFU0002        E            EXIT_SAPLCMFU_002
    Pls reward points if useful.
    Regards,
    Renjith Michael.
    Edited by: Renjith Michael on Jan 12, 2008 12:57 PM

  • User Exit/BADI/Enhancement Point in VF01 after generating new billingdocno.

    Hi Experts,
    I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 after generating  the new document no (Billing document no assign).  The Billing document no is generating in the FM  RV_INVOICE_DOCUMENT_ADD ( NUMBER_GET_NEXT).
    Now the Billing document no is generating like '0000152', i want to concatenate 'ECR' to the generated Billing document no and it should be updated like ECR0000152 in Billing tables (VBRK, VBRP).
    Kindly let me know is there any EXIT/BADI to achieve this functionality.
    Regards,
    Venu

    Hi Venu,,
        These are the enhancements and badis for vf01, please check which will be helpful to you,,
    <exit farm removed by moderator>
    <points begging removed by moderator>
           Warm Regards
            Zulfikhar Ali
    Edited by: Thomas Zloch on Oct 1, 2011 3:57 PM

  • User Exit not getting triggered

    Dear all,
    we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
    for this, i had done the following things:
    1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
    2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
    (User exit, project eveything).
    Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
    Can anyone please guide me where i might have gone wrong?
    Thank you,
    Regards,
    Lakshmi

    Hi,
    HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
    First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
    Reward is useful.
    Regards,
    Harsha

  • Customer Exit to get last day of month from Year/month

    Hi Experts,
    I need to create a customer exit to get the last day of month from Cal Year month input variable.
    Examples
    1)
    User input period: 12.2008
    I need from the customer exit: 31.12.2008
    2)
    User input period: 02.2009
    I need from the customer exit: 28.02.2009
    Can someone help me with the ABAP code to achieve this with a customer exit?
    Help will be appreciated.

    Hi,
    Please use the following code,
    Second one is the suitable solution for you, I can understand that, if it leafe year then you have the problem so use the secon one.
    First one is using Period i.e. 010.2008 (December 2008).
    Secodn one is based on Date/Month.
    Note: Insted of SY-DATUm, you give your variable name
    *******To get the Last day of the Fy Period entered by User in ZFYP***
        WHEN 'ZLDAY_FI'.
          LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZFYP'.
            zbdatj = loc_var_range-low+0(4).
            zbuper = loc_var_range-low+4(3).
            CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
              EXPORTING
                i_gjahr = zbdatj
                i_periv = 'V3'
                i_poper = zbuper
              IMPORTING
                e_date  = zzdate.
            CLEAR: l_s_range.
            l_s_range-low = zzdate.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            APPEND l_s_range TO e_t_range.
          ENDLOOP.
    Note: in the below code I given SY-DATUM, so you change to your Month Variable like using  
    LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'XXXX'.
    ** Last Day of Current Calendar month
          zzdate = sy-datum.
          CALL FUNCTION '/OSP/GET_DAYS_IN_MONTH'
            EXPORTING
              iv_date = zzdate
            IMPORTING
              ev_days = znum.
          CLEAR: l_s_range.
          l_s_range-low+6(2) = znum.
          l_s_range-low+0(4) = sy-datum+0(4).
          l_s_range-low+4(2) = sy-datum+4(2).
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Jan 27, 2009 2:47 PM
    Edited by: Surendra Reddy on Jan 28, 2009 6:12 AM

  • Program related ENHANCEMENT-POINT/SECTION with the name LMEPOF8D_02 exists

    Hello
    In an upgrade, after finishing with the SPAU task we got the following error in the standard object LMEPOF8D:
    A program related ENHANCEMENT-POINT/SECTION with the name "LMEPOF8D_02" already exists.
    Anyone knows which cause could be generate this kind of error?
    Thanks in advance for your help
    Best Regards,
    Leonardo

    Hello Sandra,
    We have finished with SPAU. Regarding LMEPOF8D include, we kept with the ECC6 standard code. Therefore, from a point of view of code, it should be ok. However, we have this sintax error.
    As you said, the include contains the enhancement point LMEPOF8D_02 which generates the sintax error, but we couldn't find if this enhancement is used in another place.
    We also found note 1331844 and tried to fix the issue by using the 2nd solution propose in the note. But, it didn't work neither.
    Do you have any idea about what cause could generates this error?
    Thanks in advance for your support.
    Best Regards,
    Leonardo

  • ALE-IDOC pbm---------- get point.s

    hi all,
    I m able to transfer material master data from 800(ides) to 810(ides) through ALE.
    But when i transfer material master data from 800(ides) to 200(dev)
    My idoc status is 02 in ides but 51 in development......after lot of trying im not able to accomplish the task.
    material is not posted in the development server.
    Help me...if possible give me ur gmail id, get points.
    Regards,
    [email protected]

    Pradeep,
    In the idoc in 51 status, what does the status message say?
    What is the error message there?
    Thanks
    Ganesh.S

  • Getting point ordinates using sdo_intersection

    I have two crossing lines. I try to get point of crossing using spatial function SDO_INTERSECTION. I got it, but ordinates was null.
    I don't know why.
    geom_edge1 := MDSYS.SDO_GEOMETRY(2002,NULL,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,2,1),MDSYS.SDO_ORDINATE_ARRAY(-654713,-1021390,-767748,-1011681));
    geom_edge2 := MDSYS.SDO_GEOMETRY(2002,NULL,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,2,1),MDSYS.SDO_ORDINATE_ARRAY(-727527,-983943,-730301,-1083802));
    select MDSYS.SDO_GEOM.SDO_INTERSECTION(geom_edge1, geom_edge2, 0.005) into geom_intersection from dual;
    X := geom_intersection.SDO_POINT.X;
    Y := geom_intersection.SDO_POINT.Y;
    I have oracle version 9.2.0.6.
    Thank you for replay.

    I already found solution - for geometry of intersection I must ask for SDO_ORDINATES, not SDO_POINT.

  • How does one get points for articles

    how does one get points for articles

    You submit your article, it is reviewed by an SDN content manager and then published,  about a week after you should see some points for your efforts.  If not, contact [email protected]
    Regards,
    Rich Heilman

  • How to get point for refering new members

    I have refered few friends to join sdn.. but i dont know where they can mention my id so that i can get  points..
    Please let me know.. where they can provide id during registration.
    Regards,
    Sudha.

    Hi SUdha,
                    After entering the registration details, the user will be asked for the email id of the existing user who referred them to SDN. Points will be awarded accordingly.
    Regards,
    Vasuki

  • User exit to get pop-up in co09

    hello,
    i have a question.
    is there an user exit to get a pop-up in co09? we don't wanna check availability in order. we only want check material status in co09.
    thanks a lot
    best regards

    Believe it or not, I've done this successfully.
    The exit is
    EXIT_SAPLIE01_007
    This fires after save/post and I used it to pop a custom screen to get some custom data.
    If you want to use the custom data from the screen in a custom update, you'll have to export to...database and import the data back in the MIGO update BADI or exit.  (If your prod instance isn't multi-server, then you can use export to shared buffer.)
    I didn't find this exit on my own - it was suggested here - I think by Suresh or Narendran or aRs or NXO.

  • User exit which gets triggered when a line item is deleted in va02

    Hello all,
                   I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

    Hello,
    Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
    BR
    Sudhakar.

Maybe you are looking for