User exit to get pop-up in co09

hello,
i have a question.
is there an user exit to get a pop-up in co09? we don't wanna check availability in order. we only want check material status in co09.
thanks a lot
best regards

Believe it or not, I've done this successfully.
The exit is
EXIT_SAPLIE01_007
This fires after save/post and I used it to pop a custom screen to get some custom data.
If you want to use the custom data from the screen in a custom update, you'll have to export to...database and import the data back in the MIGO update BADI or exit.  (If your prod instance isn't multi-server, then you can use export to shared buffer.)
I didn't find this exit on my own - it was suggested here - I think by Suresh or Narendran or aRs or NXO.

Similar Messages

  • User Exit not getting triggered

    Dear all,
    we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
    for this, i had done the following things:
    1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
    2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
    (User exit, project eveything).
    Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
    Can anyone please guide me where i might have gone wrong?
    Thank you,
    Regards,
    Lakshmi

    Hi,
    HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
    First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
    Reward is useful.
    Regards,
    Harsha

  • User exit that gets triggered at the press of 'Enter' in IW42

    Hi,
    Is there any user exits that gets triggered at the press of Enter key in PM order confirmation IW42 transaction. Basically the requirement is to give a customized message at the order confirmation screen when the enter key is pressed.
    Regards,
    Prabaharan.G

    Hi,
    You may try the following enhancement points and exit respectively.
    CMFU0001        E            EXIT_SAPLCMFU_001
    CMFU0002        E            EXIT_SAPLCMFU_002
    Pls reward points if useful.
    Regards,
    Renjith Michael.
    Edited by: Renjith Michael on Jan 12, 2008 12:57 PM

  • User exit which gets triggered when a line item is deleted in va02

    Hello all,
                   I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

    Hello,
    Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
    BR
    Sudhakar.

  • User-exit not getting triggered in VA32

    Hello Experts,
    Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
    Thanks.

    Hello Experts,
    Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
    Thanks

  • User Exit not getting Triggered in Quality Server

    Hi,
    In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
    which is getting triggered in Development server.But when I moved it to Quality,
    The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
    and that in turn is assigned to Project, still the problem persists.
    Can any one suggest me what could be the problem.
    Regards,
    Kiran B.

    Kiran,
    Check the <b>Project</b> of that enhancement is active or not. not the enhancement.
    <b><REMOVED BY MODERATOR></b>
    Satish
    Message was edited by:
            Alvaro Tejada Galindo

  • User Exit EXIT_SAPFP50M_002 getting called twice

    Hi,
    I've created a custom infotype - 9002 & am doing processing in the user exit - EXIT_SAPFP50M_002 (as suggested [here|http://sapdev.co.uk/enhance/enhance_hrpbopai.htm]). Specifically, I'm inserting one more record into the infotype. To insert records, I'm making use of the FM - HR_INFOTYPE_OPERATION. This call is in a Z report & I'm invoking it through SUBMIT & RETURN.
    My problem is that this FM is calling my exit (the one mentioned above) again! (I can see this as I've set a breakpoint in the include ZXPADU02) Since the data is same, all checks are getting passed & the same code is getting executed twice.
    I'm trying to use SET & GET PARAMETER calls to prevent the second execution; which doesn't seem to be the best approach.
    Is there any other way to circumvent the second call? Any help would be appreciated.
    Thanks,
    KKR

    Dear KKR,
    Hope you had a look at the Include LXPADF01 for the Sample Code for Infotype 0008.
    Look at it it migh give you more clue of how to use the Function Exit EXIT_SAPFP50M_02.
    Moreover if you have a look at the FM HR_INFOTYPE_OPERATION - you can see that there is a further check function HR_INFOTYPE_CHECKEXISTENCE which is being used which also calls your Function Exit - So this is the reason why your Function gets executed Twice.
    I Hope this information helps you to some extent.
    Encourage others to answer your queries by suitably rewarding them
    Thanks
    Venugopal

  • MIGO user exit to get serial number

    Hi Experrts:-
    I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
    I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
    in exit od badi i will change the status
    I have used following badi:-
    MB_DOCUMENT_BADI
    MB_MIGO_ITEM_BAdI
    Thanks

    Hi ,
    m also using GET_SERNOS_OF_DOCUMENT
    but not getting serial number.
    need to get serial number in MIGO.
    how to pass parameters to this fm.
    KEYDATA-TASER  = 'SER03'  "Goods mvmnt
    KEYDATA-SDAUFNR  = ??
    KEYDATA-POSNR   =   ??
    CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
       EXPORTING
         KEY_DATA                  =
    TABLES
       SERNOS                    =
    EXCEPTIONS
       KEY_PARAMETER_ERROR       = 1
       NO_SUPPORTED_ACCESS       = 2
       NO_DATA_FOUND             = 3
       OTHERS                    = 4
    please guide..

  • User exit not getting triggered while creating the vendor

    Hi all,
    I wanted to extend the idoc(crermas01) according to my reqiurement.
    But when I am trying to create a vendor using the IDOC cremas01 the user exit EXIT_SAPLKD01_001 is not getting triggered.
    Can anybody tell me the reason why it is happening so...........
    Thanks and regards,
    Vinil.

    Is your Idoc generated after the execution?
    Where is you break-point, it is inside EXIT_SAPLKD01_001. Please note FM EXIT_SAPLKD01_001 will not be called unless it is implemented using project (CMOD) and project is active.

  • When the User Exit USEREXIT_PRICING_PREPARE_TKOMK  gets triggered?

    Hi All,
    Could you please let me know when the following user exit gets triggered?
    USEREXIT_PRICING_PREPARE_TKOMK
    Is it before the Pricing?
    or
    After the pricing?
    Is it like Pricing uses TKOMK structure for calculating the Pricing?? Please help me....
    Thanks,
    Babu Kilari

    Thanks for the replies..
    I would like to know when this gets triggered, because in the structure TKOMK, i tried to change the value of KALSM(Pricing procedure) and clicked on carry out new pricing.
    But, the new pricing is not updated with the updated pricing procedure.
    Please let me know if I am going wrong.
    Your inputs will be appreciated on this.
    Thanks,
    Babu Kilari

  • IS-U print workbench - User exit - to get current page number

    Hi,
    I have a doubt in IS-U print workbench where in I need to get the current page number which is being processed inside the user exit of the application form.
    I have a user exit called Z_EXIT_150 and here I have a subroutine which is inside the LOOP DOC_ITEM …ENDLOOP.
    Inside the subroutine, I need to get the current script page number.
    There is an option of getting the current page as &PAGE& inside the Script but I need to know the page number inside the exit.
    Do you have any idea of getting the current page number?
    Thanks and Regards,
    Sakthi.

    Hi Sakthi,
    I have also had this problem while working in IS-U Print Workbench but was also unable to solve.  I tried looking into the output_text that is called when reaching an object that references SAPSCRIPT-FORMPAGES but I too could not find a way to save PAGE to a variable for later use.
    The only idea I can think of, although I have not tried, would be to place some sort of counter variable in the BUILD_DOCUMENTS and increment the counter each time there is a successful printout of a header logo or some other object that you expect to see printed on each new page - that way maybe you can determine later in the exit processing what page # you are currently in. 
    I hope this has helped some.  I would be really interested to hear if someone else has a solution of how to access items in the SAPSCRIPT structure from outside of the SAPscript code.
    Regards,
    Geoff

  • Help of User exit to get to updated cuobj value in SAPMV45A

    Hi All,
    In Va01 / Va02 Transaction we have some characteristic Values (In fast entry Tab)
    which are comming from Material Master. which is display on screen using structure
    RV45A.
    when i debug in USEREXIT_SAVE_DOCUMENT_PREPARE OR
    USEREXIT_SAVE_DOCUMENT I connot find data in RV45A structure.
    my problem is : when user changes the char. value in fast data entry tab. i want to get updated values.
    vbap-cuobj is created but char. value is avilable only upon saving va01.
    can anyone tell me
    1. how to get this updated char. values in user exit move_fields_to_vbap or SAVE_DOCUMENT OF SAVE_DOCUMENT_PREPARE
    or
    2. any exit which is executed after saving va01/02 or after USEREXIT_SAVE_DOCUMENT
    Thanks in advance

    I solved using  userexit_new_pricing_vbap.

  • FI-SL: create an user exit to get the "name of the group account"

    Hi,
    I'm creating a special ledger and have to add 2 informations:
    - name of the general account
    - name of the group account
    The table I se is ACCIT_GLX. In this table, I can't get the name of the general and group accounts directly.
    I guess I have to use user exits.
    I can find the name of the general account in the table SKA1. But do you know where I can find the name of the group account?
    I'm not a developer at all. But I just need the name of the field and table to indicate them to the IT team.

    Dear Expert,
    In Tcode Fs00 when you create GL account Master there is Group Account number when you maintain group chart of accounts this field automatically becomes mandatory entry , here Press F1 and Select the Technical Details button there you can find the Technical name and the table and other details of it.
    Regards,
    Shankar K B

  • User Exit for getting Purchase Requisition Release Strategy

    Hi Experts,
    When a user creates a PR I need to know the user exit I need to implement so that the First Approver (Processor) text  in the Release Strategy is populated from a custom table. I have seen that the field is MEREL_S_GRID1-STEXT. I also need to know if I can implement a user exit so that it pulls the release strategy for a PR for assets (Acct Category A) since it is pulling for Acct Category K (Cost Centre) and the Release Strategy tab is appearing in this case.
    Kind Regards,
    Darlington

    Hi Meenakshi,
    Thanks for the very useful answer. It has given clues on how to resolve this issue. I have resolved this issue for the Asset item category using the following thread: user exit for requisition release strategy, and also SAP Note 365604.
    However, I have another issue, the release strategy for Stock Items, (item category blank) is not pulling through. I need to use the same method above but would like to know how it determines the funds centre for a specific stock item. I couldn't find where that is implemented in the material master and I need info on how to determine the account assignment for stock items based on the funds centre.
    Regards and Thanks.

  • User Exit to get Sales Order Number during creation

    Hi,
    I am looking for for an User Exit which provides Sales Order Number, during creation of Sales Order using transaction VA01.
    Please provide the Structure/Field Name.
    I tried USER_EXIT_SAVE_DOCUMENT. But, it seems it doesn't provide.Kindly help.

    Hi:
    Program : MV45AFZZ
    search for USEREXIT_NUMBER_RANGE.
    BR,
    Manthana

Maybe you are looking for