Exit variable in query

Hi,
I am in BI 7 and I want to restrict the values for a exit variable when the user press the match code in the selection screen of the query. I have the code in the step = 0, I fill the variable with values but when the user press the macth code could chose other values,
thanks
jaime

Hallo Jaime,
you could do this using i_step = 3 in the variable exit. As an example see this thread [I_STEP=3 this is urgent , please help.|I_STEP=3 this is urgent , please help.; If you need further assistance, don't hesitate to write again - we have implemented this and it works very well....
Regards
Martin

Similar Messages

Customer Exit variable of Query not working in View

Hi,
I have a customer exit variable in my query to calculate the last 6 month period on Calendar month. I have used 0CMONTH for the same and then using offset of 6 on its value range to get it.
Now, I have many views based on this query, which should ideally be having the same filter condition for the calendar month, but it is not happening. Although, it is working fine for the query! The views do not seem to be catching the selection correct.

Hi there,
As far as I Know, yes they exist. The only difference here, is that you build a query with a selection screen, and you execute the query with some selection parameters, and therefore all customer exit variables, offsets, etc, will be read and changed at the runtime execution of the query, and you can rearrange your query visualization drilling down free char., making filters, etc. and storing that visualization in a view.
If you save your view and execute it afterwards, you'll get the same selection parameters to input, the same offsets, etc, that you have with the query, but with a visualization stored by you.
So that should have been working.
Diogo.

Debug Customer Exit variable in Query

Hi ,
Iam new to debugging Query in BI7. I know we use RSRT to debug query, but what radio buttom to check so that during debug, the code stops at Customer exit code??
Thanks,
DV

Hi,
Go to the CMOD and Put a Break Point where u require it and Execute.
or/and
Go to RSRT>After giving ur Query Name>Click on Execute+Debug->In the LAst Tab u have Variables>Customer Exit Before and After.
Execute it,it shud stop at that Exit for that Query.
Rgds
SVU123
Edited by: svu123 on Feb 2, 2010 8:21 AM

How to create/use SAP Exit variable of Query designer

Hello experts,
Can you please guide me on how to create/use SAP Exit variables ?
Is there any way we can transport customer exit include in which we write all codes related to customer exit variables?
Kindly provide your valuable inputs on this.
Thanks,
Mitesh

Hello Gautam,
I think you should first implement the user-exit via the transaction SMOD/CMOD and the SAP-Enhancement RSR00001 User-Exit ( BW Reporting )
For the concrete implementation I would suggest to encapsulate the variables, as it is described here
Easy implementation of BEx-Userexit-Variables
and here: BEx-Userexits reloaded
Kind regards,
Hendrik

How to create the Exit Variable

Dear all,
I want to create the exit Variables for query.
But How to create the exit variables.
Dose Anyone could share some document?
Thanks
Best regards,
Leon

Hi,
Check this out:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
assign points if useful ***
oops this is for authorization in BW reports***
anyways keep this,.. it may be help for you though this may not answer your Qn. on exit variable.
Thanks,
Raj
Message was edited by: Raj

Need logic to find Year to Date for customer exit variable

Hi to all,
I am creating customer exit variable for query .
query should display data according to current system year from jan till current system date.
here senario is like that user never enter year and query will automatically will fetch the data according to current year starting from jan to current system date.
example.
current year 2010 and today is system date is sep 29 2010, so query will display data from jan 2010 to current data sep 29 2010.
please can any one provide me logic for that.
any code .
regards
pavneet rana

Hi,
You need to create the characteristic customer exit variable of type select-options. Restrict your keyfigure based on this variable.
In the logic in CMOD,
write as below
i_step =2.
case i_vnam.
When 'exit variable'.
temp = sy-datum+0(4).
concatenate temp '0101' into temp1.
l_s_range-low= temp1.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-high= sy-datum.
append APPEND l_s_range TO e_t_range.
endcase.
For any further help on customer exit based variable, please refer below article.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f119d9-922d-2c10-88af-8c016638bd90?quicklink=index&overridelayout=true
Edited by: Rahul K Rai on Sep 29, 2010 3:09 PM

Customer Exit Variable and Condition in a Query (Sequence of Execution)

Hi,
For a query i defined a Customer exit variable and a condition....
Which will first execute...wether it is a Variable and then Condition or vise versa
Is there any way we can control sequence of execution
My requirment is first to execute the condition and the variable how can i control this
Thanks

Hi
In your customer exit you will be having a field by name I_STEP which will help you to handle the time of execution of the variable.
Assign points if helpful
Prathish

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

How to identify what customer exit variables are used in which query?

Hi all,
When i happened to check the CMOD transaction code i can find a list of customer exits are used. But i want to know what are those customer exist are used in which query? can anyone let me know the procedure of identifying it.
Thanks a lot
Pooja

hii pooja
check the foll links
Very Urgent: Customer Exit Variable
customer exit variable
MIssing Authorisation for customer exit variable query
Authorization variable or customer exit variables
if it is helpful assign points
thanks.

BI 7 Bex Query - User exit variables after variable screen re-processed

User exit variables are not re-calculated after the variable screen is called up to re-run report with a new selection. Is there some way to force the user exit variables to change? I am aware of note 1064273 but this doesn't seem to help in these circumstances.
Example:
My Bex Query uses OI_FYPER for a static characteristic selection and I have defined a customer exit formula variable which uses the values in OI_FYPER.
All works fine when the query is run first time but if the user calls up the variable screen to change the selection and re-run the query, the customer exit formula variable is not re-calculated (customer exit is called but only with ISTEP = 3).
Software version is NS2004S (BI 7.0) SPS10, BI ABAP SP11, BI JAVA SP10, BI Front End Package 1401 rel 354.

hi.. i just came to know about this in another thread..
I_STEP 3 does not have I_VNAM stored. So, to access values at I_STEP3 :
data: l_range TYPE RRS0_S_VAR_RANGE.
if I_STEP = '3'.
read table I_T_VAR_RANGE into L_RANGE with key VNAM = 'OI_FYPER'
if SY-SUBRC = 0.
...code as required...
endif.
endif.
Customer-Exit for analysis Authorizations: i_step = 3, i_vnam is empty

Problem in the variable customer exit in the query jump target

Hi developers,
we have problem because we have created a variable time on 0CALDAY who is mapped in the cube of the stock with posting date.We launch the query for example with range 01/8/2005 31/8/2005 and the resul is OK.
Then we jump on the other query where the users wish see the result of the posting date for the period 01/8/2005 31/8/2005 For resolved this problem we have created a variable customer exit for the characteristic 0Postingdate and have inserted the code in user exit variable:
WHEN 'ZV_CEREG'.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
             WHERE vnam = 'Z_DAT_AN'.
        CLEAR l_s_range.
        CLEAR datastock.
        l_s_range-low = loc_var_range-low.
        l_s_range-high = loc_var_range-high.
        l_s_range-sign = loc_var_range-sign.
        l_s_range-opt = loc_var_range-opt.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
When we effectued the jump the our objective is transfer the date inserted by user in the variable of the query sender 'Z_DAT_AN' to the variable of the query receveir 'ZV_CEREG'.
This step it does not work correctly, this why are different query?
You can help me for resolved this problem!!
Thanks Domenico

Hi,
I think, this approach does not work. Because customer exit will be finished before displaying the result set of 1st report. So the assignment to VAR2 from VAR1 does not execute then after.
I hope, In RSBBS,after assigning receiver, in the assignment details,select 'Variable' for 'Type' of 'infoobject' 0calday.And select '0Postingdate' for 'fieldname' and select 'selection options' for selection type.
Take help.sap.com help for further information.
With rgds,
Anil Kumar Sharma. P
Message was edited by: Anil Kumar Sharma

Query Drilldown does not Invoke Customer Exit Variables

We have a problem with performing a drilldown in a BEx Analyzer reprot, basically the client is a Trading company and they have inter company trading. We are using the Profit Centre as one of thre u201CFree Characteristicsu201D in the query and hence we are able to drilldown on a Characterictc by Profit Centre.
We are using a couple of BEx query variables (Customer Exit variables) to determine the inter-area and extrenal area profit centres and these profit centres will be different based on the level of Hieracry node selected when the query is initially executed. For example if we assume a hierarchy with has one root node, 3 children under the root node and 2 grand-children under each of the 3 child nodes, now if we are at the root Node of the Hierarchy then every profit centre is internal and there are no external profit centres, similarly if we are at the 2nd node (i.e. one of the child nodes) then everything under that node is internal and everything in the other 2 child nodes is external and so on.
This is where the issue starts for us, since on the report if we select the the node we want to see the results for at the query rumtime (i.e. the Customer Exit Variables are invoked at I_STEP=2 and they select the other nodes of the hierarcy if any and group them into either external or internal) then the results are correct. Now if we were to drilldown, i.e. We selected the root node and we drilldown on to see for example of the child nodes then the result are not correct, this becomes apparent when we drilldown further to the grand-child nodes.
One logical explaination is that when we are doing the drilldowns the customer exit variables are not being invoked in the BEx analyzer report and hence they are not grouping the sums for the internal and external profit centres relevent to node selected in the Drill down.
Does anyone have any suggestions regarding how to make this query work properly or show the correct results in BEx Analyzer (ideally), I have considered the Workbooks option but the client does not want Workbooks.
Please let me know if there is a program etc we can customise to ensure that the Customer Exit variables logic is used when the user does a drilldown in the query or any other way to make it work.
Many Thanks
Jack

Hi
Just to aid anyone who is thinking what to do in a similar situation, I am aware that RRI or using workbooks are a couple of good alternatives (just that these are currently not being considered by the client, hence I am asking here).. Also, if someone has Business Objects WEBI then we can satisfy the requirement by creating a new Webi Report for each of the nodes and displaying it (similar to Workbooks but much nicer and faster) or we can get the Webi to execute the variables again during the drilldown... Unfortunately the client is not using Webi either... So the solution has to be in BEx Analyzer / Query designer based...
If you have any thoughts on how I might be able to do what I want to do then please feel free, I am quite confident that I am not the 1st person to come accross this issue and someone somewhere has solved this issue.
Thanks

Subject: Where are SAP Exit Variables and how to use them in Bex Query

I have seen references to variables: 0cyear (Current Year), 0CALYEAR (current year), oCALMONTH (Current month/year).
Under 0CALMONTH characteristic or 0CALYEAR I do not see any of the variables, so how does
one use these variable in the query. For example I want to create a restricted key figure: Duration restricted by Current calendar year (e.g. 2009 if I am in 2009, 2010 if I am in 2010..).

Thanks a lot. Actally, I was looking in my production system and under varaiables I did not find any SAP Exit variables,
but in development envrionment I do see some.
Why will it not show me these variables in production? Is it because:
1. Some special premssion is required to view this type of variable
or
2. THese varaiables were not installed from Business Content
It is hard for me to beleive, it is permission issue.

RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Exit variable in query

Similar Messages

Maybe you are looking for