Expantion module stopped working after firmware update to uc520

I have recently upgraded my UC520 to software pack 8.2, and since then, the expansion module(7916 24 key) connected to the Cisco IP phone 7965 has stopped working. It just has the Cisco logo and all buttons are lit orange. I have already tried to reflash the software(ensureing to select support for all phones and the expansion module), clearing all settings, deleteing the phone that its attached to in the CCA, rebooted phone several times, removed expansion copletly and reinstalled. Any idea what may of caused this or how to resolve the issue?

zap pram and do a reset of nvram and all in open firmware. Also reset the power manager.
if you don't know how to do it then do a search as Apple's Support site.

Similar Messages

N95 Map stop working after firmware update

I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
Need help please.

have u tried reinstalling the maps application?
u can get the latest maps application update from http://www.nokia.com/maps
download the application associated with ur n95 and install it using the pc suite application
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Media Key stop working after firmware update on 55...

The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009

"The media key was working before the upgrade. After I upgraded the firmware, it stopped working.
My phone info:
5530
software version: v 11.0.054
customer version: 11.0.054.207.02
language set:25
Type: rm-504
latest update: 10/21/2009"
Did you update using NSU? I have updated mine recently and I have v11.0.054 with custom version 11.0.054.C02.01, language set:22.. and my media key is still working. Am I missing some updates? Nokia Software Update checker says theres is no update yet.
Message Edited by RhomANZ2 on 30-Oct-2009 03:53 AM
Nokia 5530 Xpress Music
v11.0.054
"How We Respond Is Who We Are..."

MG5550 printer stopped working after firmware update!!!

My MG5550 is only a couple of weeks old and has been working perfectly up until now.   I got a couple of reminders to up date the firmware to the latest version.
I followed the instructions and the down load completed and I got a message saying update successful but when I tried to print a document in my useual way it refused to print.   No error message was shown on the printer. I rebooted both printer and laptop a couple of times but to no avail.
Got couple of messages on laptop saying 'printer busy' and 'no communication with printer'.
I'm useing Win 7, connection is via WIFI, printer firmware is now 3.080
Help please I urgently need to print some docs.

It seem to have sorted itself out.    When it I could not get it to work I eventually gave up in disgussed.   To my surprise when I switched it on a couple of days later, it printed the page I was attepting to print and since then it has been OK.   No sure what happened to fix it may have been something to do with a reboot.
I dont think this printer is as good as my previous Canon 4300 but having the scanner/copier on board is really useful.   Find the paper feed is not very reliable where as the 4300 never ever missed a sheet.

My wifi stopped working after a update last year and I have updated since, can this be fixe

MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A

BoardMaker plus 6 stopped working after OS update

My Boardmaker Plus stopped working after I update my system to OSi Yosemite. The disk just spins and spins and the program does not come up? Is anyone else having this problem? How can I fix it. I need to use the program for work.

I was worried about this, I still haven't upgraded. But while doing research I saw that there is now an online version, I wonder if it's the same ...

I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?

Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

HT4650 My keyboard has stopped working after an update of Flash Player. Help! What can I do?

Why has my keyboard stopped working after Flash Player update?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do things work in Safe Mode?

Airport no longer working after firmware update

Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have.
I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to cancel my contract within the contract period.
This would be all well and good except that in the new location, the service provider can only supply broadband via an ADSL phone line (provided by a seperate telephone company) furthermore they (Virgin Media - i'm gonna name names) provide a cheap USB only modem - which in turn is only compatible with PPC Macs.
Fine for me, but not so great for my girlfriend who has an Intel Mac Mini and not so great for my new Airport Extreme which of course requires a modem with an ethernet connection.
Bearing in mind that it's just after Christmas and i can't afford to just run out and buy an ethernet modem or change my ISP - i thought that i would try something out.
With the USB modem connected to my old PPC G4 i then connected the ethernet cable (that i had connecting our two Macs allowing them to share the internet connection) - from my G4 to the WAN port on the Airport...
Now i'm a real networking newbie so i was a little suprised when suddenly and effortlessly i had created a wireless network that the Mac Mini and our iPod Touches could see and use. I set up security etc and all was well and good...for two days.
Then Airport received a firmware update and now it doesn't work and resetting the Airport doesn't help.
So now i have to get my hands dirty and like i say, i know jack about networks or the terminology.
With this configuration - and obviously we know that it can work (somehow!)
should i be in bridge mode or sharing a single IP address? and just how am i connecting to the internet. Static IP address/DHCP - PPPoE? I know what these abbreviations stand for but i don't know what they mean.
In the course of 'playing around' with the settings i have seen a message saying that Airport has an invalid I.P. address - why is it invalid and is that only because of something that i have changed or is that the route of the problem?
All the machines can see each other and the only clue i can provide is this log extract.
Jan 19 01:05:31 Severity:5 Initialized (firmware 7.2.1).
Jan 19 01:05:34 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jan 19 01:05:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:34 Severity:5 Rotated TKIP group key.
Jan 19 01:05:42 Severity:5 (WAN) link state is Up.
Jan 19 01:05:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:54 Severity:5 Associated with station 00:1d:4f:e3:87:17
Jan 19 01:05:54 Severity:5 Installed unicast CCMP key for supplicant 00:1d:4f:e3:87:17
Jan 19 01:06:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49186.
Jan 19 01:06:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:08 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49187.
Jan 19 01:07:09 Severity:5 Configuration updated.
Jan 19 01:07:09 Severity:5 unloading current configuration.
Jan 19 01:07:17 Severity:5 Deauthenticating with station
...and so on.
I'm hoping that some networking guru is reading this and can provide me with a few pointers.
Can anyone help? I've been struggling with this for days now.
Thanks in advance.
Steve.

Your setup is convoluted, but it should work. A few comments:
1. The base station should be configured to get an IP address using DHCP, which it will get from your PPC which (with internet connection sharing turned on) is now acting as a DHCP server.
2. The base station should be configured in bridge mode, since your PPC (with intenet connection sharing turned on) is now acting as a router.
3. I suggest you should turn off the network firewall on the PPC as long as your are running this sort of setup. Not ideal, but it will prevent all sorts of connectivity problems between the internet and everything downstream of your PPC's ethernet port.

N73: restore doesn't work after firmware update

Hello!
I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
After the update I tried to restore the backup via the same app.
Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
Is there another solution that doesn't involve buying this 3rd party software?
TIA

The phone is working well...
I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

Ipod doesn't work after firmware update

I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
Now i'm trying to recover it again but my computer doesn't recognize it.
¿Is there anything I can do?
Thanks in advance.
Jse

The best place to look for help first is Genuine Apple help directly from Apple.
Read the iPod Touch Users Guide.
http://support.apple.com/manuals/#ipodtouch
Also start with the basics from Apple.
1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
And More..........

Cisco VPN no longer working after firmware update

I have been using the Cisco VPN network connection to access work; after the recent update, both my Macs stopped working -- no changes have been made.
Is this a known bug? I looked at the settings, verified everything with no luck.
Thanks.

See http://discussions.apple.com/thread.jspa?messageID=12800407&tstart=0. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Acrobat XI Stopped working after CC Updates

RANT: It's happened 3 times now, and I'm getting fed up of the Adobe support - very disappointing. I don't think they know how to handle issues, and sometimes wonder if they even know the basic difference between hold and disconnect. Numerous times I have contacted them, after chatting with them for a few minutes, they say that they have to trasnfer me to the technical support, and then I get disconnected. Then the next guy has to start all over again with the same questions. Horrible.
Ok, rant is over (for now), hopefully this forum is more helpful.
ISSUE: last few (3) times I have noticed that when I update my Creatve Cloud panel, my Acrobat stops working. I'm not entirely sure if this is related to the CC panel update, but that's what it seems to me right now. So, after numerous chats with the Adobe chats, and my own office IT, I (myself) figured out that the issue could've been because I see 2 Adobe Acrobats installed on my system. The screen cap below shows what I mean.
Last 2 times I uninstalled both, and reinstalled the Acrobat from the CC panel again, and it worked. But this time it just dind't. And I've been totally unable to solve the issue with my IT and Adobe's support so far.
So, what happens is that when I launch Acrobat, it asks for licensing information again, or it says it would launch as a trail version... Come on, I'm already paying for the whole package.
Desparely hoping that the Adobe Forum Community is more capable for such support...

I've had numerous chats with Adobe support agents, and with my own IT, and haven't had luck yet. It's been a terrible experience stuck between the two IT support departments as a user I'm the one who's suffering and not these support guys...
The issue here is that my Acrobat is not working as it can't find the internet connection, even though all the other Adobe products in the Creative Cloud work fine.
We use Proxy scrypts in my office, and even though all Adobe links provided to me by Adobe, have been white-listed by my IT, Acrobat still hasn't worked.
I've tried it all, installing, uninstalling, Adobe clean-ups, registery edits, preferential boots etc etc. Still no solution.
Is there no way to manually enter a serial number to get it working???? What if someone loses internet connection, does it mean the Adobe Creative Cloud products are useless in that scenario, even though one has paid for months...
Damn, I'm angry with myself for pushing for Adobe CC upgrade. Sigh.

Illustrator CC has stopped working (after latest update)...

Hi,
I get the following message "Illustrator CC has stopped working..." when I now attempt to launch the program. This is only following the new update of Illustrator. I have uninstalled Wacom Cintiq HD 13 from the PC. Has no change.
Any help please? Thanks.
Windows 8, Version 6.3 (Build 9600)
Faulting application name: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91
Faulting module name: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91
Exception code: 0xc0000005
Fault offset: 0x000000000013920a
Faulting process ID: 0x3d8
Faulting application start time: 0x01cfe32da5a29313
Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe
Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b
Faulting package full name:

Hi Burninghammer,
Are you using the Suitcase Fusion 5 software ? If yes than please update the plug-in from the Extensis web-site.
There was a known issue with AI CC 2014 latest update & Suitcase Fusion 5. The latest update of the Suitcase Fusion fixes this issue.
Please go through this KB article:
http://helpx.adobe.com/illustrator/kb/illustrator-cc-20141-crash-launch.html
If still you face the issue, than please let me know.
With Best Regards,
Sumit Singh

Expantion module stopped working after firmware update to uc520

Similar Messages

Maybe you are looking for