Expdp with parallel writing in one file at a time on OS

Hi friends,
I am facing a strange issue.Despite giving parallel=x parameter the expdp is writing on only one file on OS level at a time,although it is writing into multiple files sequentially (not concurrently)
While on other servers i see that expdp is able to start writing in multiple files concurrently. Following is the sample log
of my expdp .
++++++++++++++++++++
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 15 April, 2011 3:06:50
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "CNVAPPDBO4"."EXPDP_BL1_DOCUMENT": CNVAPPDBO4/********@EXTTKS1 tables=BL1_DOCUMENT DUMPFILE=DUMP1_S:Expdp_BL1_DOCUMENT_%U.dmp LOGFILE=LOG1_S:Expdp_BL1_DOCUMENT.log CONTENT=DATA_ONLY FILESIZE=5G EXCLUDE=INDEX,STATISTICS,CONSTRAINT,GRANT PARALLEL=6 JOB_NAME=Expdp_BL1_DOCUMENT
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 23.93 GB
. . exported "CNVAPPDBO4"."BL1_DOCUMENT" 17.87 GB 150951906 rows
Master table "CNVAPPDBO4"."EXPDP_BL1_DOCUMENT" successfully loaded/unloaded
Dump file set for CNVAPPDBO4.EXPDP_BL1_DOCUMENT is:
/tksmig/load2/oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_01.dmp
/tksmig/load2/oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_02.dmp
/tksmig/load2/oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_03.dmp
/tksmig/load2/oracle/postpaidamd/DUMP1_S/Expdp_BL1_DOCUMENT_04.dmp
Job "CNVAPPDBO4"."EXPDP_BL1_DOCUMENT" successfully completed at 03:23:14
++++++++++++++++++++
uname -aHP-UX ocsmigbrndapp3 B.11.31 U ia64 3522246036 unlimited-user license
Is it hitting any known bug? Please suggest.
regds,
kunwar

PARALLEL always using with DUMPFILE=filename_*%U*.dmp. Did yoy put the same parameter on target server?
PARALLEL clause depend on server resources. If the system resources allow, the number of parallel processes should be set to the number of dump files being created.

Similar Messages

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Is it possible to make master pages with several title in one file? & Can I define page range from

Is it possible to make master pages with several title in one file? & Can I define page range from which page to which should be specific title?

While the number of master pages is not unlimited, you can have quite a few in any file. I've never seen the limit documented, but it's in the hundreds, or more likely thousands. There is, I believe, a page limit of 9999 pages per document, but I don't know if that includes the masters or if they are counted separately.
You can choose a page range in the Pages panel, then assign a master to them manually, and I beleive there are some scripts floating around that can assign a master page based on the appearance of a paragraph style (for chapter start pages, for example).

Is it possible to color tag more than one file at a time?

I have a Mac Book Air and I have just upgraded to OS X Yosemite. I love the option to tag files by color. However it is taking me FOREVER. I was wondering if there was a way to tag more than one file at a time.

Welcome to Apple Support Communities
Hold the Command key and choose all the files you want to tag with the same color. Then, right-click one of those files and select the color tag, so all the files will be tagged with the tag you wanted.

PSE13 repeatedly crashing when opening more than one file at a time to layer images. [was: Feeling very frustrated.]

Just bought Photoshop Elements 13. I have a Macbook Pro that meets all the requirements. I have installed and reinstalled the program but it just keeps crashing. The program will load, when I choose the expert tab and try to open more than one file at a time to layer images it just crashes and says "Photoshop Elements has closed unexpectedly" Can anyone help me please?

mikeobe wrote:
OK, kinda slooow here, I hope I'm not trying your patience!? If I understand you correctly, install dummy drivers and then the drivers that came with my printer, Designating NO default printer! Then when I need to use the printer I will have to declare which one each and every time?
Or, just intall by new printer but do not Delcare it as the Default printer, I guess in this instance there would be NO default printer?
You may not even have the problem!
Have you installed the new printer yet?
There are many more people who don't see it happen than those who do.
PS: there is always a default printer.

PSE-7 won't allow opening of more than one file at a time.

I can only open one file at a time in PSE-7. I just downloaded the trial upgrade from PSE-6. If I try to open more than one file, PSE crashes and windows wants to send a report to Microsoft. Elements works fine with only one file. Anyone got any idea's ?

Try to exit out of Elements 7 and go back in to your Organizer. Open a file and choose to edit it in full edit. Then leave it there and go back to Organizer and choose another picture to go through the same process. Now you should have both pictures showing in your bin at the bottom of the edit screen which you can toggle back and forth to as you edit each. If you want them both in the edit window itself you can you to the Window tab - Image - and choose to tile them or cascade them. Good luck, hope this works.

Only Able To Add One File At A Time From Mapped SharePoint (2013) Drive to Outlook (2010) E-mail

I am using SharePoint 2013. I have mapped several network drives. When adding files off SharePoint to an Outlook email, I can only add one file at a time. I can add multiple files IF they are not on SharePoint (e.g., stored locally, or on Dropbox); Previously,
when using SharePoint 2010, I was able to upload multiple files.
ANy advice?
Thanks.

Hi,
There are two methods to add multiple files from SharePoint library to outlook emails:
Sync SharePoint library to outlook via “Connect to Outlook”, then you will find SharePoint Lists in outlook. Locate the library folder, you could select multiple items and drag them to an email.
Open SharePoint library via “Open with Explorer”, then you could selected multiple files and drag them to an email.
Regards,
Rebecca Tu
TechNet Community Support

Processing one file at a time in Biztalk

We are changing the way we're processing files in that where we used to receive hundreds of small files throughout the day, we are now going to have these files batched into larger files that get dropped to our incoming Biztalk directory. I'm concerned about
having the server pick up multiple large files at one time. Is there a way to tell a Biztalk application to only process one file at a time, and not to pick up the next file until the previous one has finished? Note, I do not have a way to build this into
the Orchestration, as this is a Biztalk application that is actually installed by our Trizetto(QNXT) product. It uses Biztalk for XML serialization.
Thanks.

I wouldn't worry about the size of the messages unless they are approaching 1GB. BizTalk can process roughly 400 msgs/sec. Also if you're worried about processing multiple large files try load balancing. With BizTalk it is quite "easy" to load
balance. In a nut shell you have to have the dll of the application installed on all the servers you want to be apart of load balancing and BizTalk takes care of the rest. Your large files would more than likely split up and processed on different servers.
http://msdn.microsoft.com/en-us/library/aa578057(v=bts.80).aspx
The link above is for high availability but could also be used to get a better understanding of load balancing. Also if you use de-batching to split up the 3000-4000 records that would help with processing them. If an orchestration receives a file with 4000
records in them that instance alone processes the whole file. Whereas if you split up the messages each message gets it's own instance of the orchestration which leads to better performance. The only drawback is that it takes more resources so your environment
needs to be fairly large. Also if one server is busy another server with the same dll can take the de-batched messages and process them.
Here is a link to my blog post about de-batching. It is very basic but gives a good base for de-batching.
http://camartin.azurewebsites.net/post/BizTalk-Debatching

Reconnectin Media only works for one file at a time...

Hi,
After having many times relinked hundreds of off-line media files in one go, FCP now doesn't want to reconnect more than one file at a time. Although all other files are in the relative path, it seems as if I have to relink 1200 files one by one...
I've found another thread in here, unfortunately closed, but wonder if that bug hasn't been fixed yet. Does anybody know a solution for this?
Best regards and thanks for your support,
Thomas

AND... don't forget that "relative path ALSO refers to the perhaps many bins you have inside FCP. So it's possible to connect everything in a particular bin, as long as all those files are in the same folder on your drives, whether it be capture scratch, or another folder of imported material. some people I know like to put EVERYTHING in the capture scratch folder for that reason. I personally don't, but I've got a system that works for me.
EDIT: I had a mentor once, many years ago, who suggested strongly that you ought to leave the cutting room every day set in such a way as ANYONE could walk in the next day and pick up right where you left off, just in case you got run over by a car. And dang it, that's just what happened to me. Ralph, you doomed me!
Now, while he was talking film, the same rules apply. Best not to have files floating all over the place, where you've got to go searching for them.
Whether there is a bug with a specific version, I have no idea.
Message was edited by: Jim Cookman

Automator (or anything) to mass transfer one file at a time, or skip over corrupted files?

I'm currently recovering files (using Disk Warrior) from a failing hard drive, but when OS X hits a corrupted file ("Error -36"), it cancels the entire transfer, rather than skipping over it. Basically, I have to transfer one file at a time, which, on a 2TB hard drive, is going to be insanely tedious, so I was wondering if there's an automation that can transfer one file at a time, or some other way to transfer files that won't stop mid-process?

in my experience, people who know enough unix to understand what you suggested rarely ask questions about automator. Auto-mechanics don't generally need advice on choosing an auto repair shop.
Applescript is probably the easiest way to go with this. I don't know what the file structure of the recovered documents is, but in general you'd run something like this:
set sourceFolderPath to "/path/to/recovered items folder/"
set destinationFolderPath to "/path/to/destination folder/"
tell application "System Events"
          set theFiles to files of folder sourceFolderPath
          repeat with thisFile in theFiles
                    try
-- move files one-by-one in an error block
                              move thisFile to folder sourceFolderPath
                    on error
-- you can put something here to log the skipped files or display a dialog, if you like
                    end try
          end repeat
end tell

ITunes 7 won't add more than one file at a time

Hello everyone. I have a weird problem with iTunes 7.0.2. Every time I try to add multiple files to the iTunes library using the Add File To Library feature, it doesn't do anything. Adding one file at a time is possible, but tedious. Adding multiple files from a folder (using Add Folder To Library) does work, but shouldn't be necessary. I haven't had this problem with iTunes 7.0.2 on the Mac, and didn't have this issue with iTunes 6.0.5 and before on Windows. Any idea what the problem might be? Thanks in advance.
-Adam

Maybe I misunderstood your post, but this sounds like a suggestion rather than a problem.
You can provide iTunes feedback here:
http://www.apple.com/feedback/itunesapp.html
If your post was a question, post back and I'll see if I can help.
I hope this solves your problem!

Can not color label more than one file at a time

Hi,
I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
Wether i select two, twenty or twohundred only one file gets color labeled.
It doesn't seem to matter if i assign a color label through the File menu or right click > label.
Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
Does anyone else have this issue and/or a fix for it?
Thanks,
Jay

Aaaaanyone ?

Any way to transcode more than one file at a time?

I've noticed that Final Cut Pro X, when doing transcoding (for Optimizing or creative Proxy media) only processes a single file at a time (whereas it can handle processing up to 5 audio files at once), and is only using about 70% of my processor(s) -- I have a dual core, Core i5 processor, 8GB of RAM, about 500MB used by FCPX during the processing. So this thing should have PLENTY of processor and memory headroom to use, and it should certainly be able to transcode more than one file at a time. Yet it isn't nearly taking full advantage of the processors, or the RAM. Is there any solution to this problem?
--Andy H.

Try the 'add folder to library' option under file on the main menu.

Html tag to upload more than one file at a time

hai sir this is surendra i need html tag to upload more than one file at a time .I am using
<input type="file" name="">
tag to upload single file at a time i need tag to upload more than one file at a time .
Waiting for your result

You can add more than one input element of type file.
<input type="file" name="name1">
<input type="file" name="name2">

Expdp with parallel writing in one file at a time on OS

Similar Messages

Maybe you are looking for