Expert Settings in iMovie to create one-minute clip for "wmv"?

Hello,
I want to send my Windows pals a one-minute clip from an iMovie Project. I hit "expert settings," choose "WMV-9" and "default settings." File is not created.
Then, I try again and choose "custom" after "WMV-9," and the clip created is only 21 seconds long. I tried this many times and it was always the same result.
Any ideas?
Thanks,
Frankie G.

http://www.popwire.com/
It's $30. And it "sort of" installed if WMP options
are offered to you.
QTKirk,
I'm proud and grateful to report that it was your previous message that put me on the right track. In the QT Library I found the WMV-9 doc, which made me look for the program. I found it using Spotlight, and when I tried to install it--no go. So, I googled "WMV-9 Export" and it took me to the popwire site you mention above.
Something else I discovered (I'm fairly new at this): It's best to Copy and Paste the Key you buy to make the download viable. I had to register the key online, and then open QT, choose a clip to "Share" and Export to WMV-9, then look for a Key tab and paste the Key into it.
Once I got that straight I was in business. My WM players pals are happy they can see more than 21 seconds of my video clips.
Thanks again for your help. Problem solved. On to the next one.
Frankie G.

Similar Messages

  • How to create one inbound delivery for multiple purchase order?

    Hi Experts,
    Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)? 
    Is there a configuration needed for this?  If yes, please let me know the configuration to make this happen.
    Appreciate your help on this.  Right answers will be rewarded.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

    I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

    Here's what I do. My wife and  I each have an iPhone. We each have our own Apple ID. I also have another totally separate Apple ID. The ONLY thing that one has been used for was to set up Find my iPhone for our phones and my iPad. There is no reason the MobileMe setting for find my iphone can't be something completely different from your regular Apple ID UNLESS you already use MobileMe, in which case the 2 conflict in ways I don't understand as I don't subscribe to it.

  • It is necessary to create one header data for each file to be sent to CDFS.

    hi GUYS
    my sce anrio is FILE-XI-PROXY
    REQUIREMENT IS
    SOURCE FILE                      TARGET FILE WILL BE
    H1                                             H1                        H1                    H1
    I1                                               I1                         I2                      I3
    I2                                                F1                        F1                    F1
    I3                                           
    F1
    It is necessary to create one header data for each file to be sent to TARGET. Each file will be related to only one SAP Company Code.
    Thanks
    NAG

    aa

  • LSMW me51n, how to create one PR document for all the records in the  file

    HI all,
    I need to create LSMW for t-code me51n -Create Purchase Requisition. I`m using Bapi BUS2105, method CREATEFROMDATA, idoc message type PREQCR, basic type PREQCR03. The problem is that the LSMW is creating different idoc and different PR document for every record in the source file. My requirement is to create one PR document for one source file (Every source file is different Purchase Requisition) . I`m trying to do this with writing some code(global functions ) in the 'Mapping and conversion rules'  events - BEGINOF_TRANSACTION_, ENDOF_TRANSACTION__..., but i`m not very sure what exactly i`m doing .
    Please help me resolve this problem, any help will be appreciated .
    Best regards, Emil Milchev.

    Thank you for you answer.
    But I have found faster way of doing it - two source structures, one HEADER and ONE ITEM.
    HEADER: one empty text field and identificator for it.
    ITEM: everything else.
    Then everything was just fine, i`ve mapped the different IDOC segments by PREQ_ITEM fields (equal values in the source file : 10-10-10..., 20-20-20,.... etc.) and put all required fields for my LSMW
    SOURCE FIELDS:
    Z_ME51N_V2 - MASS_UPLOAD - CREATE create
    Source Fields
    UPFILE                    upload file
                IDENT                          C(010)    ident
                                               Identifing Field Content: header
                TEXT                           C(001)
                UPFILE2                   123
                    IDENT                          C(010)    ident
                                                   Identifing Field Content: item
                    BSART                          C(004)    Document type
                    BANFN                          C(010)    Purchase requisition number
                    BNFPO_FOR_MAP                  N(005)    Item number of purchase req. for MAPPING acc.
                    BNFPO                          N(005)    Item number of purchase requisition
                    KNTTP                          C(001)    Account assignment category
                    PSTYP                          C(001)    Item category in purchasing document
                    MATNR                          C(018)    Material Number
                    WERKS                          C(004)    Plant
                    LGORT                          C(004)    Storage Location
                    MENGE                          N(013)    Purchase requisition quantity
                    EKGRP                          C(003)    Purchasing group
                    KONNR                          C(010)    Number of principal purchase agreement
                    KTPNR                          N(005)    Item number of principal purchase agreement
                    LIFNR                          C(010)    Desired Vendor
                    FLIEF                          C(010)    Fixed Vendor
                    AFNAM                          C(012)    Name of requisitioner/requester
                    PREIS                          AMT4(011) Price in purchase requisition
                    ABLAD                          C(025)    Unloading Point
                    WEMPF                          C(012)    Goods Recipient
                    PS_POSID                       C(024)    Work Breakdown Structure Element (WBS Element)
                    KOSTL                          C(011)    COST_CTR v bapito ?
                    NAME1                          C(040)    Name1 - Name of an address
                    NAME2                          C(040)    Name2 - Name of an address 2
                    STREET                         C(060)    Street
                    DELIVERY_DATE                  C(008)    Date on which the goods are to be delivered
                    TEXT                           C(132)    item text
    STRUCTURE RELATIONS :
    Structure Relations
    E1PREQCR              Header segment                                               <<<< UPFILE  upload file
               E1BPEBANC             Transfer Structure: Create Requisition Item                  <<<< UPFILE2 123
               E1BPEBKN              Transfer Structure: Create/Display Requisition Acct Assgt    <<<< UPFILE2 123
               E1BPEBANTX            BAPI Purchase Requisition: Item Text                         <<<< UPFILE2 123
               E1BPESUHC             Communication Structure: Limits                              <<<< UPFILE2 123
               E1BPESUCC             Communication Structure: Contract Limits                     <<<< UPFILE2 123
               E1BPESLLC             Communication Structure: Create Service Line                 <<<< UPFILE2 123
               E1BPESKLC             Create Comm. Structure: Acct Assgt Distr. for Service Line   <<<< UPFILE2 123
               E1BPESLLTX            BAPI Services Long Text                                      <<<< UPFILE  upload file
               E1BPMERQADDRDELIVERY  PO Item: Address Structure BAPIADDR1 for Inbound Delivery    <<<< UPFILE2 123
                   E1BPMERQADDRDELIVERY1 PO Item: Address Structure BAPIADDR1 for Inbound Delivery    <<<< UPFILE2 123
               E1BPPAREX             Ref. Structure for BAPI Parameter EXTENSIONIN/EXTENSIONOUT   <<<< UPFILE2 123
    MAINTAIN FIELD MAPPING AND... :
    the MAPPING between two IDOC`s segments:
    In first segment:
    E1BPEBANC                      Transfer Structure: Create Requisition Item
             Fields
                 PREQ_NO                      Purchase requisition number
                                     Source:  UPFILE2-BANFN (Purchase requisition number)
                                     Rule :   Transfer (MOVE)
                                     Code:    E1BPEBANC-PREQ_NO = UPFILE2-BANFN.
                 PREQ_ITEM                    Item number of purchase requisition
                                     Source:  UPFILE2-BNFPO (Item number of purchase requisition)
                                     Rule :   Transfer (MOVE)
                                     Code:    E1BPEBANC-PREQ_ITEM = UPFILE2-BNFPO.
    In second segment :
    E1BPEBKN                       Transfer Structure: Create/Display Requisition Acct Assgt
               Fields
                   PREQ_NO                      Purchase requisition number
                   PREQ_ITEM                    Item number of purchase requisition
                                       Source:  UPFILE2-BNFPO_FOR_MAP (Item number of purchase req. for MAPPING
                                       Rule :   Transfer (MOVE)
                                       Code:    E1BPEBKN-PREQ_ITEM = UPFILE2-BNFPO_FOR_MAP.
    After that everything was OK .

  • From R/3 to CRM create one logical system for CRM client 300.

    Suppose i create one logical system for CRM in R/3 TO CRM scenario for client 300.another user wants to work on jdbc to CRM client 300 for this he wants to create another logical system for client 300 it is not possible,so,it is ok if he assign same logical system when he was working for CRM client 300 when he wants to create business system for CRM in JDBC to CRM.

    Hi,
    Business Systems are te logical system name for a CLient in the SAP.
    These can be reused again for different configuration scnario that you must have created for different interface.
    All you need to do is assing the Business system to your configuration scenario and Communication channel to the same.
    Regards
    Vijaya

  • How Can I Create One Entry Sheet For Multiple Line Items of A PO

    Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

    hi,
    It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
    you have to make different service entry sheets for different item of service master.
    regards
    Manish Joshi

  • Create one sales order for two customers

    Hello to all.
    I have to plan the following development. Our client can create one sales order for one material and can bill it between two or more payers. 
    In SAP you would have to create one sales order for each customer and divide the material proportionately between the customers. The doubt is if there is any development with user-exits,badis,... so you can create only one sales order with two "payers" partner functions; you would put a % of participation in each payment so the sistem would create two invoices dividing the total amount of the sales order between the payers.
    Could anyone help me?
    Regards

    Tonnetti,
    If you want 2payers to  be possible in the same sales order, you  have to include the material as two line items. Then go to each line item, the partners tab and then change the payer there. So now the header partner will have 2payers, and there will be different payers for each line item.
    Now you can do a delivery or billing as needed. For a single sales order, two invoices will be created as the payers are different. These invoices can be send to respective payers and the payment can be processed from these payers.
    Hope this helps for your scenario.
    Reward if this helps.

  • Is it possibel to create one connection [pool for one report only

    Hi is it possibe to create one connection pool for one report only. Others report are running from the another connection pool under same DB.
    Thanks,

    Hi,
    Why do u want seperate connectionpool for that single report?
    I dont think its possible.Direct database request will be good solution for this.Try importing those columns which are used to build that report into physical layer and create new subject area.Not sure weather its right way to do.
    Regards,
    Srikanth

  • Create a new clip for a new scene doesn't work on video import

    For the last few months I cannot get i movie4 to import video with a new clip for each sequence. It will import the video as one only large clip although the button "create a new clip for a new scene" has been selected in the imovie preferences.
    What can I do to solve this problem ?

    Set the camcorder's clock. See also:
    http://www.danslagle.com/mac/iMovie/video/2006.shtml

  • IDVD stuck at multiplexing and Burn ("about one minute left" for hours)

    Hello,
    Well my problem is pretty simple, I am trying to create a simple DVD in iDVD with a *.mov file and a *.m4v file.
    Everything goes well and pretty quick untill the last step (multiplexing and burning). One one line of the sceen it says "done" one line below that it says "about one minute left" and it stays there, the burn never finishes.
    It counts down very good for the last 5 minutes left, and than it stops at "about one minute left".
    Does anyone have an idea what can solve this ?
    Thnx.

    May be You find help in my collection on Multiplex Error
    *Multiplexing Error*
    *PART One.*
    Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
    Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9
    strange letters in project name eg +
    as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    *PART Two.*
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly eg x1
    This gives good DVDs
    *PART Three.*
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in:". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutly needed.
    eg external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing widescreen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From: Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    Yours Bengt W

  • How to create one submit form for both input an variable ports ?

    Hello,
    I would like to create an input from for a query I have.
    The problem is that this query has both input an variable ports and each one creates a different input form. I would like to join it into one form or at least have it under one "Submit" button so the user won't need to fill two forms.
    How can I achieve this?

    Hi Mario,
    Thank you for your quick reply.
    >>Even if you could, only port would be effective.
    Can you please elaborate?
    >> You need to change your query and make your input port-fields variables?
    So, if I understand correctly I should select whether I go for only inputs or only variables?
    Thanks,
    Roy

  • How to create one GR document for mutiple Purchase orders

    Can you please explain me in SAP - How to create one Goods Receipt document for reference of Multiple purchase orders.

    Dear Tanuj,
    Both Rama & Stephen are correct.
    You can take Single GR for Multiple PO either in MIGO or MB01 as long as that POs belongs to same vendor.
    In MIGO, after putting the PO press,enter,  again give the next PO of that vendor .
    If this solve your problem, close the issue.
    With Regars,
    Krishna Reddy

  • HT204053 How to have or create one Apple ID for iTunes, mail, iCloud, etc.?

    It seems I've created a password for iTunes, one for iCloud, etc.  How do I create one ID for all functions on my Macbook Pro?

    Welcome to the Apple Support Communities
    You can use the same Apple ID for iTunes and iCloud, and use it in your computer

  • Create one plan element for multi org in OIC R12

    Hi There,
    Can I create one plan element and use this plan element for 2 orgs, like US and CANADA?
    In EBS R115, I have to create more than 100 plan elements in each org.
    I want to know in R12 if i still need to do this. If I can create one set plan elements for multi orgs, will save a lot of time. The only difference of org US and CANADA is currency.
    Thanks a lot !

    It is same in R12 also. You need to do the same as what you did in 11i. Not much changes on plan definition side.

Maybe you are looking for