Export avchd to tape

Hi I am required to send some footage to someone from my canon hf s21, and I was wondering if it would be a good or bad idea to log and transfer it and then put the footage into an dv ntsc anamorphic sequence. And, after that print it to mini dv tape via my panasonic mini dv cam. I don't know if the downgraded material would look sloppy or not.
Thanks,
Kyle

Here's my guess. Try creating a new HDV sequence, then import your AVCHD sequence and place it on the HDV sequence timeline. Connect and turn on your HDV device and export to tape. Premiere will probably have to render the timeline before the export begins.
My Mac Pro is lightning fast, now that I've solved my "ImporterProcessServer" problem.

Similar Messages

  • What exact file format for exporting AVCHD to HDD of Sony HDR-SR12E (AVCHD) Handycam?

    When you are finished editing AVCHD files with Adobe Premiere Elements 11, what is the correct file format for exporting back to the hard drive of the Sony HDR-SR12E handycam?
    I used Sony Play Memories software to import AVCHD (.m2Ts) files at 1920x1080i PAL resolution. I tried rendering to several file formats after editing, but the files could not be exported in high definition back to the hard drive of the AVCHD camera. 
    I WAS able to import files from camera in Play Memories and then export them straight back to camera WITHOUT any editing, but of course you wouldn't bother doing this normally.
    I grew to love using Premiere Elements 10 for editing sd footage from my mini dv camera. However,  I've just purchased the AVCHD handycam and expect to receive my newly purchased copy of Premiere Elements 11 in a couple of days.
    Can anybody suggest the correct file format to produce for exporting AVCHD footage edited in PE11 originally captured on the Sony HDR-SR12E back to the camera?
    - Regards, Phil

    Phil
    Premiere Elements 10 has the Share/Tape (Record to DV). And, even that is for just DV, not HDV. There is no such choice in Premiere Elements 11 and 12.
    So, you are going to have to match up the properties of the original with Export settings and try to get the file exported onto the camera's hard drive if that is possible. Does the Sony user guide give instructions for how to import one of your video to its hard drive?
    The theory depends on how close you want the export of the edit to match the camera's original. There is no .m2ts file extension in any of the Publish+Share/Computer/AVCHD choices. If the .m2ts file extension is a must..
    One scheme to get a AVCHD.m2ts 1920 x 1080i25 for your camera's hard drive - lots of ifs
    1. Publish+Share/Disc/AVCHD and burn to folder using presets = H.264 1920 x 1080i PAL Dolby.
    (The preset cannot be customized so you will go with the Adobe bitrate.for the preset)
    2. Then go to the folder saved to the computer's hard drive, open the BDMV Folder, then the STREAM Folder of the BDMV Folder, and use the 00000.m2ts file there as your file destined for your camera's hard drive.
    If the hard drive will accept ..m2t, then you could use Publish+Share/Computer/AVCHD with Presets = M2T - H.264 1920 x 1080i25 and customize the export settings under the Advanced Tab/Video Tab and Audio Tab.
    Please review and then let us know if any of this works for you.
    Thanks.
    ATR

  • Which option I need to choose when I export AVCHD to a movie , without transcoding?

    It says that Adobe Premiere CS5 can import and natively edit AVCHD content . without transcoding. How can I do this ?  It seems when I export AVCHD MTS from my camera to Premiere  , and want to join multiple MTS clips into ine timeline , which options may I choose to export , without transcoding?
    I have try Blu-ray it transcodes to m4v , or using adobe dinamic link to encore , it ask me to transcode.

    Premiere does import and edit native AVCHD.
    Alll exports are encoded / transcoded.
    AVCHD is a camera ( source) codec only.  Not a delivery format from an edit.

  • Best codec to Export AVCHD for Storage on Blu-ray

    I'm just beginning to edit with Premiere Pro CS5 and I'm working with AVCHD footage natively for the first time (previously used FCP).  I just shot a wedding and the client would like the Raw Footage that I shot.  Normally I would just copy the AVCHD folders onto blu-ray discs and burn them as data discs with no issue.  However, the Ceremony lasted longer than anticipated, so I have three 32GB cards that were filled up to about 26 GB (with only one clip on each camera as they just rolled the whole time.  I actually have about an hour on each card that's worthless because the ceremony started an hour late since I did not have another Camera Op to go to the balcony to turn them off and back on.)
    Instead of having to buy 50GB blu-ray discs (which I believe are a good bit more expensive than the 25GB discs I have), I would like to bring the AVCHD files into Premiere Pro, edit out the worthless hour of footage, then export it to a format that I can give to them on 25GB Blu-ray Discs.  I have not figured out if I can export AVCHD footage and create new AVCHD files.  I'm guessing that is not possible, and if it is not, what would be a recommended format to export to?
    Basically I just need something that will be less than double the AVCHD file size and is an editable format that the client could potentially use again for editing if they want.  My first thought was ProRes but I know that will be way too large.  I've not worked with XDCAM, so I'm wondering if there is a type of XDCAM that might fit my situation?  I'm open to any and all suggestions!
    Thanks,
    Mike

    If it were me, I'd just give 'em what I have.  At some point, I know I'd be using the 50 GB disks anyway, so having a stash lying around is not a bad thing.

  • Is a 2 minute exported avchd mov file supposed to be 1 gb?

    Is a 2 minute exported avchd mov file supposed to be as large as 1gb? There aren't even any edits or changes done to the original video! What am I doing wrong?
    I'm using Quicktime Conversion; Compression H.264. How do you get these files into the low double digits (i.e. 40 mb) for the web?
    Any help would be terrific

    Import your video into Compressor, open Apple Devices and choose HD for Apple Devices (5Mbps) if it is HD or SD for Apple Devices if it is standard def.
    The HD setting will give files of around 40MB per minute and the SD will give around 15MB per minute.
    You don't want anything less or the quality will begin to suffer.

  • Export AVCHD with Premiere Pro 4

    Since AVCHD is a great format and i can flawlessly play it with my PC and Media Center (and is great for Yotube because its small and Youtube is fast with the AVCHD-Encoding), i wanted to export my Videos in the same codec as my Sony HDR-CX 505VE records them
    But i'm a complete noob when it comes to encoding settings, and could not find any AVCHD-Setting in the Adobe Media Encoder...
    Is exporting AVCHD even possible?

    Well, pure AVCHD Export is not available. MP4 H.264 is however. Depending on what your delivery scheme is, you might want to explore other options.
    Good luck,
    Hunt

  • Exporting avchd sequence

    hey all ye knowledgable folks,
                                           I need to export a 60fps non-anamorphic 1080i avchd sequence. It was shot on a canon vixia hf100. I am editing on an amd phenom II x3 720 processor 2.8 ghz, 4 gb ram, 64 bit windows 7 operating system. It seems that no matter what I try to export it tells me 100 hours and really doesn't even have a chance of completing itself. I was wondering what settings I should enable to produce a full quality HD file that could be played on any computer or hd monitor and really just any advice you could give me on exporting avchd projects. I've only been working with premiere pro for about a month so I'm still a bit of a newb.
    -erik (newb)

    How long is the sequence?
    What format and codec are you choosing for export?
    Do you have many effects applied to the clips in the sequence?
    -Jeff

  • Help importing/exporting AVCHD in FCP 6.0,6

    I have been having numerous problems in Final Cut Pro for the proper procedure on how to Export HD footage at its fullest quality. I shoot with a Sony NX5U and after im done exporting the footage, it always looks terrible. meaning that the footage is distorted and when i go to view full screen it almost looks like Standard Definition... Im not shooting without any gain on the camera so i know that cant be a factor in this case. My import settings are.. Sequence settings " Apple Pro Res (HQ) 422 1920 x 1080 30P" (for when im shooting 30p of course) Capture Preset "HDV Apple Pro Res (HQ)" when i export as a "quicktime movie" set to current settings it always looks bad! I have been messing around with this for a while and i cant seem to figure out what it is that i am doing wrong.
    Could it possibly be that i am using a older version of final cut that i dont have the current up to date capture preset/sequence settings?
    Any suggestions would be greatly appreciated!

    we just bought a volume license and were shipped 6.0.1 studio. the AVCHD plug in at the panasonic site shows a 6.02 and a 6.03 version. I went to the apple FCP support downloads and do not see an update to 6.03 or 6.02. these are on new IMacs in a tv lab.
    thanks.

  • Exporting AVCHD to mp4 from final cut for uploading to youtube (apple prores, .MOV, h264, x264, handbrake)

    Hello everybody,
    I Edit 1920x1080 AVCHD in Final Cut 7. Working with apple prores to export video to mp4 and then upload it to youtube. The goal is obviously the least quality loss in the process and to get a file as light as possible. Which of these three options is correct?
    1. Export to mp4 from Final Cut (using quicktime conversion): h264 codec and bitrate 8000 kbps.
    2. Export to .MOV from Final Cut (using quicktime conversion): h264 codec. Then, use handbrake (mp4 / x264 ).
    3. Export apple prores sequence to. MOV from Final Cut (using quicktime movie). Then, use handbrake program (mp4 / X264 codec)
    thanks a lot!

    One friend told me dont choose none of the three options...
    Told me about exporting a reference movie from timeline and then take the reference file into compressor.
    I finally took the reference file and took him to compressor. I installed x264 and got one .mov very heavy, so I had to use the handbrake to get less weight and get mp4.
    I did the same operation in streamclip and got a mp4 file (x264) with same size than .mov (compressor). So in both cases, if I want the less size I have to go on 2 steps (first compressor or streamclip and then handbrake ..)
    any more suggestions? :-)

  • Exporting to DV tape with a DVX 100a

    I am trying to export a project from FCP to DV tape using my DVX 100A camera as a deck (I know that it would be better to use a regular deck but that's not in the budget right now so please no need to offer advice about using a regular deck).
    I have read that the fire wire of fcp 4 is not supported by the DVX 100A. However, I can get the computer to communicate in capturing mode with the dvx through firewire, but cannot get it to communicate the other way - - going from the computer to the camera to export to tape.
    Any help would be much appreciated.
    Jim

    thanks for the response.
    I am wondering though, what are you referring to when you say QT ISSUES. what is QT6?
    When you download from you computer on to your DVX, what setting did you use on your DVX? I put mine on video, but get nothing other than a blank blue screen. As noted before, I know that the camera and computer are communicating because I was able to control the camera through the firewired in that mode.
    I might just be missing a very simple step. Any help would be greatly appreciated.
    Thanks
    Jim

  • Cant export back to tape

    Hi,
    I use iMovie since 3 years ago, and so far no prob, but since yesterday this prob is bugging me. I have FCP4 installed in the same drive (which later upgraded to 4.5HD then FCP5)and i know the issue regarding export to tape failure and i have always followed the same procedure everytime i wanted to export to tape frm iMovie (to drag out the 2 Qtime FCP plugins onto desktop) and it worked, until yesterdau.
    I need to move this huge iMovie file (almost 2 hours, but its not a prob, i have previously did more than 3 hours project in iMovie without a glitch) to tape urgently, and im stuck with this 'Communicating with camera prob.." everytime i tried.
    I have also deleted my FCP and all programs that came with it, but still the prob wont go.
    Help Me!! I cant seem to find the answer anywhere, and if upgrading to newwer iMovie is the solution, im not buying bcos i love iMovie4, with all my great plugins in hand.
    Thanks in advance!

    how about "the full nine yards":
    http://www.macworld.com/2005/01/features/preventmacdisasters/index.php (3pgs)
    http://docs.info.apple.com/article.html?artnum=43000
    http://docs.info.apple.com/article.html?artnum=88338
    http://danslagle.dvmix.com/mac/iMovie/usage/5020.shtml
    http://docs.info.apple.com/article.html?artnum=61603

  • Exporting AVCHD for BluRay in Premiere Pro CS6

    Hello,
    I have AVCHD files taken with a HD camcorder at its highest quality settings (HD FX - 1920 x 1080 - 24Mbps - H.264AVC).  I am looking for the most appropritate workflow to edit these in Premiere Pro CS6 and burn them over to BluRay using Encore, while maintaining the original quality of the AVCHD files.  Currently when I import the files into Premiere Pro, and preview the video clips in the sequence, the video appears as it does in the original files.  In PrPro, the properties of the AVCHD files indicate that they are at 29.97 fps, 1920 x 1080, with square pixels (1.0).  However, after exporting the sequence from Premiere Pro (via Media Encorder) to Encore, the video appears to have some jagged edges with some loss of video quality, and I would like to resolve this issue.  For the export settings I am using the H.264 BluRay default settings.  Please provide details on the correct/most appropriate settings that should be used to export the PrPro sequence to Encore with the above mentioned AVCHD files to Encore for recording onto BluRay while maintaining the original file quality.  Thanks.

    Seaspray -  I will let the experts correct any bad advice here and perhaps I am adding nothing you already don't know or are doing.   I recently went through the same exercise being new to PP CS6.   Is that footage interlaced?    I first drug a sample clip to the New Item button to create a matching sequence.    I had some issues when I wasn't being careful about sequence settings matching, particularly putting interlaced in a progressive sequence.   When I was ready to export, I chose the H.264 Blu-ray preset closest to my source footage.   I made sure the key video characteristics matched - frame size, frame rate, progressive vs. interlaced, if the latter upper or lower, PAR, etc. etc.   In some cases I tweaked VBR vs. CBR and bit rates.    I then produced separate .m2v and .wav video/audio files.   Then I imported those files as assets into Encore.   You should then see Encore tell you it does not need to encode the video or audio after analysis.    Unfortunatley, this process does require one encoding, but I don't believe there is anyway around that matter as PP CS6 apparently does not support "smart rendering".   However, I think with just one encoding you are not going to see your footage noticeably degraded.    Agreed, none of the monitors in PP or Encore should be used to judge quality.   I also noticed major differences playing back files on my PC with various media players vs. PS3 + big TV.  

  • Problems exporting SD to tape in Prem Cs5.5

    Hi Guys.
    I am having trouble exporting SD footage back to my camera from the time line. HDV footage exports  back to camera  fine. Capturing both SD and HDV is not a problem. Exporting SD and HVD to Encore is also fine. I have tried switching cameras using both an HD and an SD camera. I just keep having issue with SD. I have tried with both device control enabled and disabled.
    I have also exported from the timeline  to my HD using media encoder(avi) and then opened a new project, changing project settings and importing the AVI file but still Sd will not export to tape. Both cameras appear to go from DV out when the clip starts to play and then reverts back to Dv in. This does not happen when exporting HD.
    Any advice would be appreciated  Thanks

    I don't use tape, but some links I saved may (or may not) help
    Export to Tape http://forums.adobe.com/message/4699448
    Hardware MPE must be OFF to be able to export via Firewire
    http://forums.adobe.com/thread/902499
    http://forums.adobe.com/thread/880824
    Also CS6 http://forums.adobe.com/thread/1016269

  • Can't export AVCHD transcoded to MXF through CS4 Media encoder

    So, I need some help. I shot AVCHD clips PH 1080P 24P transcoded with the Panasonic transcoder into MXF files to my desktop. Imported that folder with 15 clips into Premiere and and began editing about a three minute sequence in a P2 1080 24p preset. i even interpolated all my files to 23.976 I built a timeline. Everything looked great and played nicely.
    Then I went to export it. I Went to file export - media. It launched the media encoder and showed up in the box. It said "waiting." I clicked on start que. When I clicked on that it said loading "my project file" below. After about ten minutes a yellow yield sign came up and said couldn't locate source material.
    Any ideas?? I'd really appreciate it.

    Hi MarkCole,
    did you have Pr CS3 on the same system which you had un-installed after installing Pr CS4? If yes, then you may need to re-install Pr CS4 again.
    If not, then you can try launching AME, going to File>Add Premiere Pro sequence, navigate to the location where the Pr project is saved and select it. Once the Pr project loads in UI, select the appropriate sequence and click OK and then click Start Queue.
    Also, you might want to update to Pr CS4.0.1 and AME CS 4.0.1 and see if the problem goes away.
    Thanks
    Aurobinda

  • Problem exporting AVCHD to H.264

    I am having big problems exporting a sequence to H.264. I will try and provide all the information. Please let me know if I have missed something.
    Problem:
    The sequence will not export cleanly. I have tried H.264, MPG 2 and MOV files none works. My preferred output would be H.264. I have exported files in this format before (taken on the same camera) with any trouble but this time there are jumps in the video (i.e. the picture jerks for a fraction of a second) and/or massive distortion of the whole image - see screen grab. The problem is not present when viewing the sequence.
    I would really appreciate help with this.
    Computer:
    Mac OS 10.5.8
    2.8 ghz Intel Core duo
    4gb 800 mhz ddr2 sdram
    Camera:
    Panasonic HMC 151 (PAL version of HMC 150)
    Native file type:
    AVCHD
    Here is are the properties of one of the video files:
    Type: MPEG Movie
    File Size: 343.0 MB
    Image Size: 1280 x 720
    Pixel Depth: 32
    Frame Rate: 50.00
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:02:19:10
    Average Data Rate: 2.5 MB / second
    Pixel Aspect Ratio: 1.0
    Sequence details:
    Sequence 01
    1280 x 720
    00;17;41;26, 25.00 fps
    48000 Hz – Stereo
    Sequence 03
    1280 x 720
    00;04;55;17, 50.00 fps
    48000 Hz - Stereo
    (I've tried it both 50 and 25fps)
    Output:
    I have tried a variety of settings including:
    H.264 HDTV 1080p 25 set to 50fps
    H.264 Custom set to 50 fps

    Premiere pro version:
    4.1.0

Maybe you are looking for