Export file problem

Hi All,
I have three users in my Unix system.
1) Backup
2) Ora9ias - application user
3) Oracle9i - database user
I am using the following export command for a database user :
exp userid=adm/$adm_password@$database_sid owner=$module_code file=$mod_filename.dmp log=$mod_filename.log
when ran from backup and oracle9i user it completed successfully ,but giving the following errors when ran from ora9ias user:
EXP-00002: error in writing to export file
EXP-00002: error in writing to export file
EXP-00000: Export terminated unsuccessfully
at present I am using oracle9i release-1 for both app server and database
thankx and regards
anirban

use this command for export and alos check the permission of the folder
give permissin by chmod 777 *
exp cp360(user)/cp360(password)@spqa(connection string) file=asset_subclass_m.dmp(filename) tables=asset_subclass_m(table) indexes=no constraints=no grants=no

Similar Messages

Lightroom 4.3, Windows8 export file problem

I am running Lightroom 4.3 on a new Windows8 Lenovo PC (T430s). After importing and developing the files, I use the export function to limit file size to 2 meg. After the export is complete, I receive a error message on a screen that reads "some export operations were not performed" and I receive a list of "file could not be written." Actually, all files are written, but they are not limited to 2 meg. I run LR4.1 on a Windows7 pc at my home office, and I use the same settings on both machines. Any suggestions?

0
I have the same problem LR 4.3 Win 8. Exporting files with LR of any file type NEF, TIF, or jpg to a jpg file. If I want to constrain the file size say to 1,000kb it will fail on a lot of the files. If I export say 10 files it will fail on about half of them "Some export operations were not performed". When viewing the target folder with windows explorer the failed files show up as and icon "PS" where the ones that made it will show the thumnail of the photo. If it try to view or delet these files it tells me that the file is being edited in LR. As soon as I close LR the files become available in windows explores but the files size was not constrained to the size I specified in the export function. I am exporting to a different folder than the original files are in. This problem started a couple weeks ago when I updated Win 7 to Win 8. The original files can be any size, or image type. It seem that it is always the same files that will fail if I retry doing the export. If I do not check the "Limit file size to:" box so that the file size is not constrained then the export works just fine except that I end up with too large of a file. I also use the image size function to size the image and that creates no problems. So it would seem that limiting the file size creates the problem. Is there a fix for this in LR or is the problem in Win 8?

Import from export files problem

Hi,
I am a new user. I installed oracle 10g. I took an export one schema and I want to import back. But when I put "import to export files" , it says "the page cannot be displayed." and I installed another machine, it says same thing. What am I do wrong?

Did you try to run export/import from commands? or some kinda GUI tool?
If you use import/export, you can find them from Oracle syntax.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm

New problem with file name while exporting files

Hi all. Whenever I export files from Crystal, it converts the filename from mixed case to lowercase, i.e. Vendors.pdf or Vendors.csv becomes vendors.pdf or vendors.csv. The destination folder has other files of mixed case, it's not a setting on that side. Since this file is data for an upload, it's a problem. Can't find a setting in Crystal. Is there a fix somewhere?
Thanks
Robin

Hi Robin,
When exporting this is by design, most OS's won't allow the same name so it's mostly not an issue. You could write a small application that exports for you then you can rename it to anything you want.
Thank you
Don

File export size problem (PNG,JPG ....) - CS5

I am using trial of Adobe Illustrator CS5.
When ever I export file (RGB) to PNG or JPG format, there is size difference of 1px in width or hight or both.
But when I save that file with Save for Web & Devices option, then there is no such issue.
I have tested with so many files.
I didn't faced such problem with Illustrator 4.

I have looked all the option .... alignment, pixel grid , not frictional value ..... But still 1px difference.
Now I have switched back to CS 4. For while till problem not solved.
But there is issue. One more thing I am using Windows 7.

File Export Renaming Problem

I want to export collections of files from Lightoom.
I want to rename the newely exported files, but I want to use the same file number suffix as the original file.
I also want to embed the oringal file name in the metadata of the newly exported file.
The problem is that, when I go into the File->Export dialog i.e. the "Filename Template Editor" the orginal "file number suffix" is not showing up in what would be the newly created filename. The orginal file number suffix does not appear to be part of the metadata.
The current filename on disk does however have the file number suffix as part of the name.
However it does not seem possible to extract part of the current file name (i.e. the number suffix) on export.
If I rename the files using a number sequence then adding or removing a file will change the sequence on subsequent exports of the collection.
(Not something I want to do, since it would then be difficult to keep track of the images used originate the exported file, if I updated the collection.)
Renaming all my original files is not a viable option since there are too many of them and different exported files may be in more than one collection.
*Any suggestions as to how to get the file naming I want for the exported files, i.e. "placename-oringal file number suffix"?
(Given the file number suffix is missing from the metadata)
*Also I would like to include the existing file name in the metadata of any new file name.
Any suggestions on how to automate this?

John said:
> Unless you check "minimize metadata", it should all be there.
No I have not checked this box.
> Second, if you rename your files just before you Export (and not in the Export dialog, but actually rename them by batch
> so the LR name is changed) you'll be able to link them up to the originals much more easily.
No this will not work. My naming method is quite useful for me, but not useful for potential buyers.
When I export collections I want to simplify the names.
> Third, the rename editor is pretty flexible.
Yes I know, usually it is sufficient, but in this case it does not do what I want.
> Finally, all the metadata is there, and searching is much easier via it rather than a complex naming convention
> (not that it's so complex, but getting there may be.
Not sure I completely agree here. My naming method works quite well for organising images and for processing and so on.
Now since I have collections spanning multiple directories and so that I want to export the files with a simplified filename.
I expected to be able to do this using the file name editing template.
The BreezeBrowser renamer is much more flexible than the Lightroom filename template editor, so I may end up using that.
However it will be messy and add a few extra steps. i.e. export to a new directory using the existing filename. Then use Breezebrowser to rename the files by extracting the "file number suffix" from the original filename and making sure there is sufficient information in the new filename to create a one-to-one mapping. Then upload the new files to the website.
I stil don't see how to get the original file name into the metadate of the new filename though?l
Really I should be able to do all this in Lightroom.

Problem with export files

Hello,
I have got the version 5.3, original.
I have a problem with export files. After work with a lot of picture in dng format, I try to export all picture in jpg format, but the number of pictures exported are less than the original number.
Why?
Thank you in advance

There is nothing you are doingt wrong, the web people need to check their Flash stuff, most importantly realyl include al lthe files you provide them with. there's a reason why it spits out 4 files...
Mylenium

Missing Render Files / Problem Exporting Quicktime Movie

Everything was going great on my 21 minute project.
I had exported it to iDVD via a Quicktime movie and it looked great in widescreen format. It worked perfectly.
Now, for whatever reason, when I load my project, I get a message saying the Render Files are missing. I am unable to locate them anywhere. I had them stored along with my project on an external firewire 400 drive.
So I press "continue" without finding the missing files.
Now when I export my movie, it appears 4:3 with gray vertical bars on the side!
When I view the project on the canvas, it looks perfect as 16:9. Everything looks normal in FCE.
Did a render file get corrupted or something? Is there a way to delete all the "old" render files and tell Final Cut Express to re-render my entire new project? Would that solve my problem?
Any help is greatly appreciated!

I did what you said and the "exported" file says:
Kind: Final Cut Express Movie File
Under More Info it says:
720x480 Integer (Little Indian) Timecode
Total Bit Rate: 30,313
Why am I trying to export?
Before I ran into trouble, I would export my FCE project using the Export Quicktime Movie command.
I then used iDVD (set to 16:9) to burn to DVD.
It worked perfectly before.
But now, all of a sudden, the same project always shows up at 4:3, whether played in Quicktime or when burned to DVD using iDVD set to 16:9.
The version of FCE is 4.0 and the version of Quicktime is 7.4.5
Thank you again for trying to help me!

Audio problems when exporting files from Premiere Pro CS5

I try to post in English.
I have audio problems in Premiere Pro CS5 when exporting a film.
I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
Thanks for answers
Frieder

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Problems with captions in the exported file

I export my sequence as a quicktime file and the captions should be embedded in the export file. But the exported quicktime file doesn't show the captions. Who can help?

Exactly what version of Premiere are you running?
What type of captions? CEA-608? CEA-708? Teletext?
When the sequence is loaded in the Timeline, can you see the captions in the Program Monitor?
When you say "captions should be embedded in the export file," I assume that means that on the Captions tab in the Export Settings dialog you set Export Options to "Embed in Output File." Please confirm.
How are you checking for captions in the exported clips? What player? Have you enabled caption display in it?

Exported file sounds different inside Audition CS6 - audio channel mapping problem?

Hi guys. I've been working on some voice reels today, and for some reason my finished and exported files sound different to how they sound in Audition - basically, the music tracks increase in volume whenever the voice actor isn't speaking. As mentioned, this isn't happening in the Multitrack session, just when playing back the exported track in a third-party app, and has only been happening today. I've tried messing around with the Audio Channel Mapping and Audio Hardware settings in the Preferences, without any joy. I'm suspecting something's got messed up on the sound card, but just wanted to check that I haven't missed something painfully obvious inside of Audition!
Specs:
Windows 7 Home Premium, SP1, 64-bit
AMD Phenom II X64 2.8 GHz, 8GB RAM
Adobe Creative Suite 6 Production Premium
M-Audio Delta Audiophile 2496
NVIDIA GeForce GTX650Ti 2GB

Can't answer that without quite a bit more information about the third-party apps, what exactly you're exporting, workflow, etc. It won't be a mapping issue though - that will only affect the output of Audition to a hardware device.
But if you are exporting a single file with everything on, and it plays okay in Windows Media Player, for instance, then whatever is happening isn't with Audition, but whatever you are putting it back into. It sounds as though some sort of auto-leveling system is at work - and Audition wouldn't do that unless set up very specifically to do so.

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Lightroom 5 cannot export files in original Raw format (LR 5.4, Mac, OS 10.9.4).

A client has the following problem: When trying to export files in the original Raw format (.CR2), the operation failed and a dialog informs us that "Some export operations were not performed". We can export JPEGs just fine.
After lots of testing, this is what we discovered: The problem does not appear to be catalog-based; we run into the same problem using a test catalog. The export operation works fine, however, with the same test catalog and images on two other machines, and it even works fine on the same machine with a new user admin account that we created.
So it appears to be something associated with the user account, , or with how LR is interacting with the user account, but I cannot figure out what it might be. We can copy the Raw files when using the Finder to do so. But not via Lightroom. Any thoughts, ideas of suggestion would be greatly appreciated! Thanks, Sean

As part of your testing make sure you've tried exporting JPGs from the same folder as the CR2s you're exporting as original, and export JPGs from CR2s to the same folder as you're exporting your originals. This would test LR's read and write permissions from and to the folders being used.
From this document you can see that all the LR files other than the program, are under the /Users folder with different values possible for each user, so the difference could be that the users that work are using the original LR defaults, if you have just started using LR with them after you started having this problem, or at least that the user with the problem has some oddball settings that are interfering with Export as Original.
Preference and other file locations in Lightroom 5
You can test for the Preferences being off by either copying the preferences from a user that has the problem to a user that doesn't have the problem--probably through an external or common folder, or be deleting the preferences file from the user that has the problem and see if it resolves. Moving the preferences file or renaming it may be better than deleting it if no change is seen, then you can restore the preferences back by moving or renaming the file back to the original location and name.

Error while rendering: Export file not found - what to do?

Hi,
I have been editing my video in four different premiere pro projects (as I got adviced to do from these forums because it's AVCHD clips). I have rendered these four projects and burned to four DVD's (total playtime is around 1.5hours) - which is working fine.
But then I try to import all four projects into one big master project because I want to make a blu-ray iso. The import goes fine (I import like this: File > Import > Choose project > Import entire project)
I export to encore, make the menus etc. and click "build" to start rendering. The problem is that after some time I get this error:
Blu-ray Object: "sequence-name-here/project-name-here.prproj", Export file not found
I have seen this error before while rendering some of the four individual projects - but when I saw them I simply just tried again by exporting to encore from the projects again. This seemed to work - but with the big master project I have tried several times with no luck.
Can anyone help me fix this issue? :)

Yes, I got this too:
For posterity, here is what I have found that completely fixes this error, repeatedly: Clear Encore's cache. Specifically:
Close your Encore project and exit Encore
Go to the cache subdirectory named for your project (ie. if your save file is c:\projects\mymovie.ncor then go to c:\projects\mymovie\cache)
Delete the file "mlf.cache.v10"
If your Encore project contains any Premiere Pro dynamically-linked assets, start Premiere Pro and load at least one of the projects used in Encore. (I have found that this reduces memory usage -- for some reason, Premiere Pro takes up less memory than if Encore spawns the PProHeadless.exe media server to serve the same function)
Restart Encore and load your project
...and wait, patiently, for Encore to re-scan all of your assets and build up the cache again and don't touch it until it's finished. I use Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653) to watch my disk activity and CPU to know when Encore is finished (just hover on the cyan-colored graph and you can see what program is performing the most disk activity). Once it's all finished, I save, then immediately try to build my project again. For proof of concept, my 40GB BD-50 project just built last night after getting this error yesterday afternoon.
If any of your assets are not transcoded before you begin this process, transcode them all, then start this process over again from step one. Clearing the cache does not clear the transcodes.
I hope this helps someone. I was not looking forward to completely re-authoring my project, which I've been working on (on and off) for a few months.

IPhoto 9.6 does not include photo description in export file

My system is current with OS X Yosemite 10.10.1, iPhoto 9.6, Preview 8.0
The caption/description does not export from iPhoto. I have not exported files from previous iPhoto versions expecting the file to contain the iPhoto Caption/Description. This is a s/w feature that I want to use starting today and forward.
The caption/description for my test file is "Test Description". I have carried out the steps required to export the file (see below). The actual result is that the file caption/description is "EPSON scanner image" and not the expected result of "Test Description".
Is this a known problem? Any suggestions or information is appreciated.

The title has been exported, as your screenshot is showing: It has been exported as the "Title" field:
For the "description" tag click the "Tiff" tab in Preview's Inspector.
You can also see the description in the "File > Get Info" panel.

Export file problem

Similar Messages

Maybe you are looking for