Export License Determination for Non R/3 systems

Hi Experts,
We have a non-R/3 system from where sales orders are created and sent to GTS for License Determination. We have developed an interface to load required details to create export declarations.
We would like to determine export license for the documents created in GTS. We have done all the settings required for License Determination but, still not able to determine license automatically.
Can anyone advise is it possible to determine license without r/3 feed? If it is possible, what could be the additional check we have to do.
Thanks,
Sudheer

Thanks for your reply..
The settings which i done was determining license perfectly when the export declaration documents are created with reference to R/3 documents (proforma invoice from R/3.
I am looking for manually created document only in GTS, how can we determine export license. Is it possible to determine export license?
Thanks,
Sudheer.

Similar Messages

Account determination for non-valuated material

hi,
I have configured account determination for non-valuated material when I try to post the Invoice then error come that GR/IR account required for posting. but my GR is Non valuated so GR/IR account would be ignore then why required GR/IR account by system at the time of Invoice.

You have to understand the difference between GR non valuated and non-valuated stock
Non- valuated stock has following attributes
1. Value update should not be flagged in the material type and valuation area combination (OMS2)
2. That means the stock will not have inventory values and further good movements after GR would not have accounting document
3. Non- valuated stock material can have GR valuated or GR non valuated ,depends on tick /untick of GR non valuated field in the purchase order under delivery tab.
4 . Material type does not have any control on GR non valuated .It is controlled by account assignment category or item category or manually in the purchasing documents.
Scenario 1:
in your case if you have created PO with non-valuated material and without GR -non valuated flag ,there must be an accounting document in GR as follows
GBB     - Consumption account - Debit
WRX - GR/IR account - credit
and if you do invoice ,you would have following accounting entries
WRX - GR/IR    - debit
vendor-           - credit
Scenario 2:
IF you have created PO with +non- valuated material + and flagged + GR non- valuated+ in PO, then GR will not have any accounting entries and MIRO will have following accounting entries
Vendor -     credit
GBB - consumption account - debit
let me know if you have any concern
Regards
Raja

License Determination for Sales Return process

Hello SAP GTS Experts,
We have a situation, where we need to create Return sales from Customer &
in the same Return order, we will send the repalcement product to Customer.
In this case, good movement type 653 (return sales) & 601 (Delivery to customer)
will be used.
Can any one help to map this process under Compliance for License determination.
Logically, for Return item, Import License should be picked & for replacement item
Export License under Legal Control.
Need your suggestons to map this process for License determination.
Similarly, we need to think about Subcontracting process in MM, & relevant license
determinaton.
Thanks in advance.
Regards
Mayank

Thanks for your Reply Dave.
Requirement is for Country Sweden. Currently Whenever return sales order is created in ECC, system looks for Export License in GTS. As per Goods movements (653) Logic, Import License should be determined here.
Let me explain you the process in Details-- For Repair/Services Process, these return sales orders are created. Here again there are 2 possible scenarioes:-
1. We can return the faulty Item (Movement Type 653) & provide Repalcement product (MT 601) to customer .
2. Return Sales order will be created (MT 653) & Faulty Item will be sent back to Vendor for repair (Using Return PO process, Movement Type 161).
Business wants us to provide Solution for Determining Valid Licenses (export/import) depending upon the situation.
Here We have Bigger challange when the Return Sales order has Both type of Items (Mention in Scenario#1).
Are you sure , there is NO Need of Licenses for replacement/rejection Process??
Please Let me know Your Inputs.
BR,
Mayank

License Determination for Imports

Hello All,
We would like to implement a License Determination Strategy for imports. I have not tried it yet, because I am still awaiting final specifications from the user department. But before I can tell them, that we can do this in GTS, I was hoping to find out if anyone has been successful implementing.
Any thoughts, comments or actual experience out there?
Regards, Dean

Dean, you absolutely can use GTS to cover that for you. Creating the legal regulation itself is no different then anything else you already have for export.
The main differences for import are when you create the numbering scheme, you will want to use the create for Import lists instead of create for Export lists, and then when you create the determination strategies as well - you'll want to set the codes up as ICCN's for import in the Classification/Master Data area of Comp Management. From there maintaining the strategy(ies) are the exact same as they would be for import, only again you'd be using Legal Control - Import as opposed to export.
Hopefully that helps a bit, I know I was pretty breif in the description. Do let me know if it helps though or if you have any other questions!
Graham

Export type determination for excise invoice

We are using the Automatic Excise Invoice while doing the billing document. But while cancelling the excise invoice system is giving the error "Utilization already done for this invoice". This error is not coming while creating the excise invoice manually from the J1IIN tcode. I can able to cancel the excise invoice if it is created manually.
This is for the Export Scenario.
For this issue what I have to do and I have tried all the permutation and combination with different series groups for the export and domestic. But still I could not able to solve this issue.
I request you to please do the needful
Please advice.
Regards,
B. Rajesh,

Dear Rajesh
Go to IMG screen, select Logistics-General --> Tax on Goods Movements --> India --> Business Transactions --> Outgoing Excise Invoice --> Maintain Default Excise Groups and Series Groups.
Here, check what has been selected for the combination of Sales Area / Shipping Point / Plant / Excise Group / Series Group. Probably, you would have selected "N". Change it to "U" and retry.
Thanks
G. Lakshmipathi

Foreign Trade - Export License Number for SED and SLI

We are not using full blown foreign trade. I just recently set up ECCN codes to be used on the above forms for exporting (we have home grown SAPScripts). Now I am being asked to have a way to store the Export License Numbers by material (it is item 22 on the SED). Any ideas?

thanks Alex Zheng for your answer but i did not get you
when i define a license type in VE51 -> no material number attribute exists
please clarify
thanks in advance

Foreign Trade _ Export License Number for SED or SLI

We are not using full blown Foreign Trade. I just recently set up ECCN codes to be used on the above forms for exporting. Now I am being asked to have a way to store Export License Numbers (it is item 22 on the SED) . . . They are asking it be stored on the material. Any ideas?

thanks Alex Zheng for your answer but i did not get you
when i define a license type in VE51 -> no material number attribute exists
please clarify
thanks in advance

Profti Center Determination for Non Leading Ledger

Hi,
We are on ECC6, EHP4. We have activated non leadgin ledger and I am facing issue in asset accounting transaction type for Write up, I have created for Non leading ledger (IFRS) . Following is the issue.
I have created the transaction type "Z71" and attached it to the "IFRS " depreication area. Whenever I post the write up entry and process it from "ASKB" with transaction type "Z71"I get the error "Balancing Field Profit Center in line item 001 not filled." Whenever I use transaction type which posts to both the ledger, entry gets posted correctly without any error.
What could be the issue, am I missing sometihing in configuration?
Please advise
Regards
Shailesh

Dear shilesh,
were you maintain profit center in Define document splitting characteristics for general leadger account
Pls reply me
Thanks & Regards
shankar

Volume License Keys for Non-Profit Organization

Hello everyone.
I am in need of a volume license key for Microsoft Office Professional 2010 for a not for profit organization.
They do not have the I.T. cloud infrastructure in place for office365.
The organization that I represent is the "Homeless Intervention and Shelter House" (H.I.S. House)
http://www.hishouseplacentia.org
Can I contact Microsoft directly to obtain a key or do I have to go through a reseller?
Thank you.
Paul La Capria
Owner, MICRO Technologies

Hi,
We mainly provide technical support for Office products in this forum, since your request is about licence and the policy may differ in different areas, I suggest you contact the local customer service to get more appropriate support:
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can SAP BI (BW) stand alone as a data warehouse for Non-SAP Source Systems.

I recognize that the answer to this question depends on the version of SAP BW we are discussing. My question is one being posed to determine how SAP BW fits in with the BI world and the other tools available.
- Can a company implement SAP BI without also having the SAP ERS applications?
- If so, will SAP BI effectively support 3rd party source systems and what is needed to make it effective (NetWeaver XI, NetWeaver 2004s)?
Thanks for your expertise.
Denny

hi dear,
clearly the most valuable input given by BW is a native integration with all SAP world...
well, you can manage a BW without having a SAP ERP as source system:
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/frameset.htm
(DBconnect, BAPI...)...
Hope it helps!
Bye,
Roberto

SLDCHECK for Non-XI/PI system??

All,
I have connected my Abap systems to my SLD and am successfully updating the data every 12 hours. However, I am running the test SLDCHECK on my ABAP systems and getting errors with the LCR Function Module. I have gone through the troubleshooting document mentioned in several SLDCHECK threads, and cannot find any issue. On my non-XI/PI Abap systems, do I need to make sure SLDCHECK runs clean? I plan on implementing E2E diagnotics in SMG. Or does the SLDCHECK only have to run successfully for XI/PI systems?
Plentiful points for helpful gurus!!!!
Thanks,
Jeff

RZ70 is all you need to do to connect ABAP to SLD. SLDCHECK is for Exchange Infrastructure.
-RK

G/L Determination for Non- SALES Company

Hi All
I want to know how can you bypass setting up some inventory accounts needed when you are setting up a company that deal with sales.
We are setting up a company that do sales strictly purchases and the only sale they might do is sales of an asset.
So when I set up warehouse for their procurement i get an error , need to speciafy cost of goods sold account.
The only stock they keep is stationery or just marketing material... for company use.
I tried removing the check under company details -->> Basic Initial. -->> Use perpertual Inventory and the warehouse can be added.
Please help.

Hi Bongani
The system always checks that certain G/L accounts are set, whether you use them or not. You can not stop this checking function, so the best is to add a G/L account number even if you won't use it. I am assuming that your documents will be service type or use service items?
Kind regards
Peter Juby

Export photos & data for non-users of CS or LR?

I have a number of wildlife photographs that I would like to make available to staff to help in field identifications. They do not have access of LightRoom or CS5. Is there a plug-in or other software that can capture the key words and EXIF data and make it available thru MS Access or Excell?

I don't know of any plug-in but you could do it in the Print Module of Lr by using the <Photo Info> feature (right side of the print Module). The Photo Info will appear below the image.
When you click on the small triangles besides the word "Filename" a fly-out menu appears. You can either choose one of the preset metadata (for instance "title" or "caption") or create a custom Info by selecting <Edit> at the bottom of the fly-out menu. The Edit-menu looks like this and you can select any combination and you can also insert custom text.
When you are done with Photo Info you can either print the image with the photo info or you can select <Print to JPG> and create a JPG of your image with the data that you selected in <Photo Info>.
If you enter the required field information data into - for instance - the caption field (in the Library Module) this info would appear in the JPG below the image when you select <Caption> in <Photo Info>.
WW

Could not find any import/export licenses

Hi,
I have configured License determination for Export in my GTS system. I have created license type ENC and a license of this license type. But, When i send a docuement to GTS,it fails to find license for this license type. Below are the screenshots:
Please let me know if I have missed any configuration or there is a problem in License determination procedure.
Regards,
Madhav

Hi Madhav,
Do you really need both the license types to be checked and determined for the legal regulation?
If yes, please activate "Check Multiple License Types" under control settings for Legal control.
Once this is done, you will have to assign authorities in the license type. Authorities can be managed via Customs code lists.
I had bookmarked a previous thread where similar discussion happened and Mike Wells had put in step wise details for this. Just sharing the link. Please check this and try,
Triggering multiple license types within a single legal regulation
Thanks
Dhilipan

Multi partner License Determination Capability in GTS

Hi,
For export license determination, we have business avaibale based on the combination of ECCN and Country of Destination
Destination country being either ship-to partner country or ultimate destination country in order of preference specified in partner function sequence.
But, I am looking for a functionality that license determination check should carried out for both partner functions.
1. ECCN and Ultimate partner country AND
2. ECCN and Ship-to Party partner Country for a single sales order.
Does anybody come across such situation/requirement in business which is a real time scenario.
Can anybody guide me on this front as how to achieve this eithwe by some enhancement etc, of config setting in GTS system
Any guidance on this is appreciated.
Thanks,

Hi Venkat:
Thanks for response.
I have also seen in the SAP documentation, but it says that if the license is found for the first partner function in the group then it will not check the later one.
But, in my case the sales document has 2 partner functions in the group and as well as document, but it executes for only one, then my requirement is not fulfilled.
Actually, I will generate rules for both partner countries and both should be determined (Ultimate consignee ctry and Ship-to ctry) if the license determination rules is not found even for one then it should block.
It has to check for both license rules.this is my requirement.
Thanks in advance,

Export License Determination for Non R/3 systems

Similar Messages

Maybe you are looking for