Exporting All data

Hi,
I am exporting data using the "All" data option. When I import it into another databse should the data be recalculated?
Please confirm.

I think KrK was referring to level 0 exports, in which case you would need to agg the db.
if you are considering level 0 data.I am a fan of the full export and import on target as it is as defragmented as can be.
Regards,
Cameron Lackpour

Similar Messages

Export all data - service

Hi ,
I am trying to export all data from Service record type. but after export i find some data missing. After analysis we found that it is due to Microsoft office 2003 is restricted to only 255 columns.
Has anyone faced similar issue? What was the work around?
We don't have Office 2007 and procurement will take month. So need a immediately resolution.
Sandy

Try and open in notepad or wordpad.
In case you do not want to change the file in Excel try the viewer of Excel @ http://office.microsoft.com/en-us/excel/HA102221731033.aspx?pid=CH101030611033
Prakash

Export all data from my waveform chart to excel

Hello, my name is Chris. I am just learning to use LabView. Everything I have learned so far is through these boards. Which is a valuable tool for someone learning. The VI I am working on is to monitor current from a unit we are testing. I am able to monitor current and have it running in what I believe to be real time. As I said, this is the first one I have made. I am trying to export all the data from my Waveform Chart to a report. Everytime I try I get one instance and it measures 0. I don't know what I am doing wrong. Any help would be appreciated. Also, if you have any suggestions on the all around working of this I would appreciate that as well. Thank you in advance.
Attachments:
Lp Current Test.vi ‏83 KB

Hey Christophrt,
If you are trying to display the microseconds for a waveform chart in LabVIEW here is how you can do it:
Go to the Chart Properties>Display Format>X-Axis>Advanced editing mode>enter:
%<%I:%M:%S%6u>T as the format string and you will have the hours: minutes: and seconds to the microseconds.
If you are trying to display the exported data in microseconds in Excel, you will probably have to do some formatting changes in Excel to have that work.
Regards,
Tommy G.
Applications Engineer
National Instruments

Export to Excel Action in MS SSRS Report not exporting all data in Report

Hi,
I have developed a complex Report that has many expandable nodes in a table format. The report works fine.
However, when I export the Report to Excel using Actions --> export to Excel, only the data in expanded nodes is included. The data in collapsed nodes is not included.
I am looking for approach to include data in expanded nodes in Excel Export. The expanded data can be expanded in Excel.
Any help in this regard will be appreciated.

Hi Abhijit PS,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Export all data block records

I can't seem to remember but what is the library or tool in Oracle Forms that allows you to export the entire data block of records to a file (i.e. csv)? Instead of using TEXT_IO to write one record at a time, there was one to do the whole block.
Gio

The only thing I can think of is using the webutil library to either use CLIENT_TEXT_IO, or you can use the CLIENT_OLE2 functions to control the client-side applications and move your records over.
Regards,
Jordan

Export all data of selected line in search help to fields in table control

I've created a search help which will export 4 fields. These 4 fields should be populated to the corresponding fields in TABLE CONTROL. However, in my program, only the first column is populated and the others are blank. How to solve this problem? Do I need to include POV? Thank you.

Hi,
1. Create a search help with four exporting parameters.
    ( check the you have created properly the sterp step
     procedure in creating the search help).
2. No need to go for POV.
3. After creating the table control assign the fieldnames into
   the control, then click on the fieldname it will show the
   attributes of that field . ther you can find te search help field
   fill that field with your search help name .
4.After assigning the field, check it in executing the report.
      Hope this will work for you, if it is not let me know.
      Reward points if it is helpful .
Regards,
Madhavi

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

How to select the "in columns" dimension on export all Command ?

Hello,
I'm trying to export data from an V6.5 Essbase database to a 9.2 one.
The easier and faster way I found is to use the 'Export database all data in Columns' from the 6.5 cube and load the data with a rule file in the 9.2 (The Export database command is MaxL command).
The Export All Command with the "in columns options", export all data and put one dimensions in columns. Previously, It was always the Time dimension (M01 .... M12). And all worked fine.
But someone changed the order of the dimensions in the V6.5 Essbase database. And now, there is another dimension (which changes more often) in columns and which have a lot of members (meanwhile my time dimension only have 12 members).
So do you know how to select the dimensions which is in columns when using the export database all data function ? I do not see any options in Maxl ?? Maybe there is a rule to follow, in the dimensions order ?
Do you have any idea about it ?
Thanks for your help
P.S : I'd prefer to avoid workaround such as using Reports Scripts or Calc Script (there are too slow).

Why not use Essbase's native export format, bring it over onto your new environment, and reimport? Change to your heart's content on the target.
Yes, the dimensionality (names, order, members, etc.) will have to be the same, but this approach, not the columnar export, is the fastest and most efficient way.
Regards,
Cameron Lackpour

Import all data using maxl

Hi
we would like to export all data from BSO cube my maxl script,
as the db is bigger then 2gb, essbase split the file to 2gb each, and we’ll get more then
one file to import.
How can I have maxl script which know to import all data files on the specific folder without indicate the names of the data files created...
Thanks in advance,
Messi

This post may be helpful as it covers the same question - Re: Export Lev 0 goes into multiple files....maxl??
Cheers
John
http://john-goodwin.blogspot.com/

Not able to export all table data to excel

Hi All,
I am using jdev 11.1.1.4.0
I want to export all my table data to a excel file.
I used ADF inbuilt <af:exportCollectionActionListener/> to do the same.
Also, I have pagination on my JSPX.
When I click on export button to export the data, it exports current records in the page not all the records.
For instance, I have 100 records in my table and I am displaying 20 records per page.
When I click on export to excel image, it exports current 20 records instead of exporting all 100 records.
Please tell me how to export all the records to the excel.
Sample code,
<af:exportCollectionActionListener exportedId="t1" type="excelHTML"/>t1 is id of my table from which I want to export the data.
also, I have tried exportedRows="all" - but it doesn't work!!!!
Appreciate your help.
Thanks and Regards,
Madhav K.

Hi Arunkumar,
thanks for your reply.
Yes, it works....
But I don't want to do the same in such way.
Because almost every page I have export to excel functionality.
So if follow this way then I have extra table on every page. I don't want this in my application.
Is there any other way???
Thanks and Regards,
Madhav K.

What is the easiest way to export all tables data from Oracle to MS SQL Server?

Hello MS,
I would like to export all tables from Oracle 11.2 to MS SQL Server 2012 R1.
Using the tool "Microsoft SQL Server Migration Assistant v6.0 for Oracle" did not work for me because there are too many warnings and errors regarding the schema creation (MS cannot know it because they are not the schema designer). My idea is
to leave/skip the schema creation to the application designer/supplier and instead concentrate on the Oracle data export and MS SQL data import.
What is the easiest way to export all tables data from Oracle to MS SQL Server quickly?
Is it:
- the „MS SQL Import and Export Data“ Tool
- the “MS SQL Integration Services” Tool
- not Oracle dump *.dmp format because it is a propritery binary format
- flat file *.csv (delimited format)
Thanks!

Hi lingodingo,
If you want to directly export all tables from Oracle database to SQL Server, I suggest you use SQL Server Import and Export Wizard. Because you just need to follow the wizard with GUI, this is the easiest way.
If you want to make some modification for the tables‘ data before loading to SQL Server, I suggest you use SQL Server Integration Services package. For more details, please refer to the following similar thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/38b2bed2-9d4e-48d4-a33f-1d9eed1c062d/flat-file-to-sql-server?forum=sqldatamining
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Exporting SQL data to Excel 2010 files - Excel sets all columns to DT_WSTR, ignores numeric or currency

It looks like this has been a problem since forever, but I'm hoping someone has a solution. I'm exporting SQL data to an .xlsx file. I have the columns in my query set to the appropriate values, e.g. SELECT Cast(column1 AS nvarchar()) 'column1',
Cast(column2 as currency) 'column2'. I have a spreadsheet and I've set the data type for each column. I have an OLEDB connection manager with the connection string of
Data Source=C:\MyFile.xlsx;Provider=Microsoft.ACE.OLEDB.12.0;Extended Properties="Excel 12.0;"; When I look at the Advanced Editor of my OLE DB Destination Component, I see that all the Input Columns are of the correct datatype, but
all the External Columns are of datatype DT_WSTR.
How can I get my numeric, currency, date fields to be written to Excel as numeric, currency, date? Right now they all get written as text, any numbers get single quotes put in front of them so they are treated as text.
I'm using SSIS 2008 R2.
I don't get it, SQL and Excel are both Microsoft, why is it so hard to get them to work together?!

Hi,
converting to DT_WSTR because you are converting this into nvarachar in your select statement in oledb source.
are you looking into the oledb destination or Excel destination for data types.
please remove the casting from your select and create the new table as showing in the following snapshot:
http://zaimraza.wordpress.com/

How to export ALL my GPS data with photos?

Hi,
I hope you can help me save a lot of time.
For various reasons I have abandoned Aperture 3 in favour of Lightroom 5, and as part of the process (severl months ago) I exported all my 30,000 photos out of my aperture library along with sidecar files so that I would be able to keep my metadata. All but a few gopro phots are geotagged, however I have now discovered that for 14,000 of these images no GPS data was included in the sidecar file.
As far as I have been able to research I have two options. First to re-build the library by re-exporting the files, merge this with my current Lightroom library and hope I don't get any duplicates. Or, secondly, re-tag the 14,000 photos manually or from the GPX files I still have hanging around.
What I really would like to know is if there is a 3rd option?
What would be nice is a way to export only the GPS data and time stamps for all 30,000 and then use that as a track in Lightroom...is that possible?
Thanks for any help

I'm not aware of a way to do that from Aperture but it should be possible to script that ability.
Just run through all the images and have the script output the EXIF data you want. Not to difficult if you have any Applescript experience. If not I'm afraid you will need to resort to your other options.
regards

How to add a new dimension in ASO cube without losing all data

Hi,
I have an ASO cube with 18 dimensions and I want to add a new one (regular). When I add this new dimension it asked me that the all data has to cleared before the restructure can take place. If I click yes then I would lose all data regardless of the fact if I have a level0 export or not. Because when I tried to reload the export back into the cube it gave me an error cause all the dimensions were not present in the export. Does anyone know how would I be able to accomplish this task?
Thanks
fikes

You can try this work around solution.
1) Export Lev0 data
2) Clear the cube
3) Add new dimension Regular.
4) Add a default member Reg00 in the new dimension and save.
5) Open the Lev0 data in a text editor, Insert "Reg00" in the begining of the file and Enter.
6) Lev0 file will have first record "Reg00" and the remaining export file will be from the second record.
7) Load the modified file with out rule file.
You can verify that all your history data will be loaded w.r.to the Reg00 of the New dimension Regular.

Reg: Exporting the data into excel in ADF 11g application.

Hi All,
We have developed an application in ADF 11g which retrieves the data from database in the form of table. Now we have a requirement to export that data into an excel sheet.
Can anyone please help us regarding this.
Thanks,
Harsha

Hi Harsha,
you can use <af:exportCollectionActionListener /> component to do that. Set the exportedId property to point to of the table. You have options to export all rows or only selected rows.
<af:commandToolbarButton text="Export All Rows to Excel" immediate="true"
                                               id="exportAll">
<af:exportCollectionActionListener type="excelHTML" exportedId="table"
                                                 filename="export.xls"
                                                 title="ADF Faces Export - All" exportedRows="all"/>
</af:commandToolbarButton>
<af:commandToolbarButton text="Export Selected Rows to Excel" immediate="true"
                                        id="exportSelected">
<af:exportCollectionActionListener type="excelHTML" exportedId="table"
                                                 filename="export.xls"
                                                 title="ADF Faces Export - Selected Rows"
                                                  exportedRows="selected"/>
</af:commandToolbarButton>Good Luck,
Luc Bors

Exporting All data

Similar Messages

Maybe you are looking for