Exporting remarks on separate lines

The customer has lines of remarks in their item master data records. They wish to export these
reports into Excel using a query.
When they do, the remarks appear as one long line instead of separate lines. Is there a way of
exporting this information to any type of format (e.g excel, word, notepad) so that the remarks show
with carriage returns so the text is on separate lines?
Thanks,
Kate

The answer probably depends on what you want to do with the data once it reaches Excel.
I think that it would be difficult to do with SQL Query & export to Excel because I am not aware of any features in SQL to chop block text into lines of a particular size, but what about just wrapping the column in Excel once it's there?
If you really need it as separate rows in Excel, then I think that you would need to go via some other product which would do the line splitting for you. The Crystal viewer which we use in Business One allows export to Excel, and Crystal will handle the line splitting.
Regards,
Douglas

Similar Messages

  • Exporting PDF document to Excel.  When I export a PDF document to Excel containing lists of  people the Excel page shows all the names on  one line several inches deep instead of on separate lines which makes editing impossible.  What am I doing wrong?

    Exporting PDF document to Excel.  When I export a PDF document to Excel containing lists of  people the Excel page shows all the names on  one line several inches deep instead of on separate lines which makes editing impossible.  What am I doing wrong?

    Murray is right. Padding (and margins) is added to the width. However, when using percentages, you should never use figures that add up to exactly 100%.
    Browsers need to convert the percentages to pixels. Because pixels must be whole numbers, some percentages are rounded up, which results in the final element dropping down below its neighbours. With percentages, it's much safer to use values that add up to 98% (99% often works, but 98% is safer).

  • I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

    I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
    Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
    Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

    PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
    This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
    (see ISO 32000 for what PDF "is")
    What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
    Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
    Be well...

  • How to handle Packing, Frieght etc., additional charges on PO as separate lines - not looking for LCM

    Hi,
    Following is Business requirement given by client
    1.Create Item ( say item code : PACKING CHARGES ) as Purchasable only ( non-stockable )
    2.Invoice Match Option in Purchasing Tab of Item is : Receipt Required : No , Inspection Required : No
    3.Receipt Close Tolerance is : 100% in Item setup > Purchasing Tab ( Client don't want this line to appear in Receipt Screen )
    4.PO Created with two lines one is Inventory Item and second line is PACKING CHARGES
    5.As soon as PO is approved Second line got closed for Receiving , First line is the only line visible in Receipt Screen
    6.Receipt and Delivery is completed for Inventory item
    7.Invoice is entered > Matched > Validated > generate accounting entries is also successfully completed
    8.PO is still with Closure Status : Open at header level
    9.Inventory Item Closed Status is Closed , PACKING CHARGES line is still with status Ope
    Expectation is the PO Closure Status should go to Closed , since we have completed Invoice matching and account generation and there is nothing pending to be done.
    Please help.
    If you have any Test case document or document explaining similar case with accounting entries, this will be a great help.
    Regards
    Anil

    Hi Anil,
    I tried your test case here and below are my inferences.
    a) At the time of PO Creation, the packaging item selected will be close for receiving.
    b) The Item will be available for matching only if the Invoice Line type is Item, and the controls are defined as 3 Way Match Level with PO match option.
    c) Before attempting to match this line, the match level at invoice must be changed to PO.
    d) This line will not be created as a freight or packaging line, but it will be an item line type.
    These inferences point to the fact that the mapping is not correct. By the book, freight or any other misc charges are finalized only when the item is received and not at PO creation.
    Which means that the PO should have the only the item which is being procured and not the charges as separate line items.
    At the time of creation of the Invoice, while matching you have an option to check the Freight/ Miscellaneous check box, which gives you a popup to enter the value of the Freight and associated cost type.
    By adding this, system adds a new invoice line with the type freight/ misc and puts the additional amount incurred as charges there which is the correct behavior.
    Please discuss with the customer and update us based on above facts.
    Rgds,
    Abhi

  • Auto-pay separate lines on same account with different payment methods?

    if i have an account with two separate lines on it (for example, one for me and one for my gf), how can i set up auto pay by line?  in other words, have auto pay on one line with my cc, and auto pay on her line with her cc?
    i've been poking around in my verizon, but it seems i can only do auto-pay for the entire account...and i created a second userid for the second line, but it only lets me do "pay bill" not set up auto pay...

    I don't think what your describing is possible with Verizon's system.  Since the account owner is the only one responsible for payment, they haven't designed tools for the other users on the account to make payments in the same way.
    Maybe you can set something up through your bank?  Have your girlfriend's bank/CC automatically send a payment for her share of the bill to Verizon shortly after the bill is generated, then set up your auto-pay for the remainder a few days later.  That gives you some time to make sure everything has processed and credited correctly before the bill is actually due.  Once you know it works, you can adjust the dates.

  • Separate line item for taxes in accounting document of MIGO

    All SAP Gurus,
    As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
    Similarly is it possible to have separate line item for tax amount which is inventoried.
    Regards,

    Hi Rajan,
    Freight is from pricing procedure whereas tax is from taxing procedure.
    Tax cannot be shown in separate g/l in MIGO.
    Reason:
    If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
    I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
    U can also try doing the same and then check.
    Reg
    Raja

  • Separate line item for each invoice in payment document

    Dear Experts,
    while making payment for a vendor through F-58 for multiple invoices, the system grouping the invoices on Business Area basis and giving the line items.
    For example there are 2 invoices for 5000 and 6000 in one BA and another 2 for 4000 and 9000 in second BA, the system is generating the entry as follows
    Vendor  A/c Dr   BA1  11000
    Vendor A/c  Dr   BA2  13000
    Bank    A/c  Cr            24000
    I want the system to generate separate line item for each invoice instead of 2. How do i do it?
    But this is not happening when i am making partial payment and in that case it is generating 4 line items.
    regards
    Suresh

    Thanks for the reply
    Checked it but still it is working in the same way.
    It is a requirement for the client, is there anyway to do it?
    Regards
    Suresh

  • Separate Lines debited to Customer Account

    Dear All
    Kindly go through the following details and guide me :
    My Client is a Project Based Organisation. So for every project they take advance as Down Payment.
    For example if the Project value is 1.0 Lac INR and as per agreement Down Payment is 10%, then Client takes the down payment of 10000.
    Now client started supplying the material to its Customer (we use delivery based billing). The requirement is that while doing the invoicing of a particular line item, the down payment should be adjusted, for Example if the Base Price is = 5000, and Sales Tax = 50, the required Accounting Entry should be as follows :-
    Required A/C Entry    
    Customer      Dr     4950
    Customer     Dr         50 (adjustment against advance)
    Customer     Dr         50 (Tax)
    Revenue     Cr     5000
    Tax Payable     Cr     50
    By using the Installment Payment Terms, I am able to get the following accounting entry:
    Customer      Dr     4995
    Customer     Dr        505 (adjustment against advance)
    Revenue     Cr     5000
    Tax Payable     Cr     50
    So system is basically adding the Tax Value and Basic Price and then as per the terms in Installment Payment Terms dividing the value as per the percentage maintained (here it is 90% and 10%) in payment terms.
    So client reuirement is to send separate line for accounting entries which is posted to Customer G/L where revenue amount should be divided as per the Installment Payment Terms.
    If further clrification required kindly let me know.
    Is it possible to achieve the above said requirement, and if Yes, then Please guide me.
    Thanks
    Amitesh Anand

    Hi
    Resolved by using the Functional Module : EXIT_SAPLV60B_007.
    Thanks
    Amitesh Anand

  • Import remarks with multiple lines

    Hi,
    How can I import using DTW for Item remarks with multiple lines?

    Hi,
    Check the thread
    Importing Multiple Lines in a remarks (user_Text) of items using DTW?
    multiple line import through DTW (user_text for oItems)
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • How to display a string in separate line in a jsf page?

    Hi,
    my view bean returns a string say, " Java Server Faces" .I just want to display all the three in a separate line like
    Java
    Server
    Faces
    If i go for concatenation or append method it is displaying in a way as before in java console.But when i display the same in a JSF page it is displayed as a single word.Can anyone help me in this?
    Thanks in Advance.
    Edited by: Swetha_Swetha on Feb 12, 2008 10:34 PM

    ya if we are passing three separate string values means we can use
    But am passing a single string value but appended as "Java"+"\n"+"Server"+"\n"+"Faces".
    In JSF page am just calling the method so, it should return the values in 3 separate lines.
    Thanks in Advance.

  • Display multiple choice column selections on a separate line in the body of email

    This question could have been answered elsewhere and I just don't realize it. I have a SharePoint Foundation 2010 form (11 columns) that has one choice column allowing the user to select multiple options (checkboxes). The selections have been typed into "type each choice on a separate line". Moving to Designer we have created a workflow that sends an email when the user submits to form.
    If Current Item: Select shift equals DAY request    Email ................
    The body of the email has this field:
    Information Being Requested: [%Current Item: The following information is being requested%].
    When the user gets the email the output for this field is string on a single line separated by a comma. What I need is each of the selections to be on a separate line so the users can easily read what is being requested and not miss any of the selection. I'm stuck. I'm not worried about text wrapping. I've been searching for hours but either it's not what a need, it's over my head, or I just don't know where to make the changes. I don't use VS but I do know html and I'm fairly comfortable in Designer. I would appreciate any help.

    Firstly, can you edit your post and take the question out of the code / quote box. It'll make it easier to read.
    Secondly the options depend on the version of SharePoint.  Are we to assume you're using SharePoint 2003 or 2007 as you've posted into the legacy forums?
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Cordless phone on separate line kills AOL connection with Airport Extreme

    I lose my AOL connection everytime I get a phone call. My cordless phone is a panasonic 2.4Ghz gigarange extreme connected to a separate line. How can I change settings on either Airport Extreme or the cordless phone to fix this?
    Thanks,
    [email protected]

    I'm not sure if it would adequately help your problem, but you might try separating the channels of the AEBS & phone (setting the AEBS on ch. 11 and the phone on ch. 1).
    Patrick

  • CST SEPARATE LINE ITEM

    Hi all,
    Is it possible to get CST as a separate line item in MIGO.
    Please let me know why is this happening!!
    I'm raising a PO for say 1000 tons and now Im capturing excise invoice for half the quantity i.e. 500 tons. Excise invoice has BED, CESS, SHECESS & CST. Here CST is getting inventorized.
    While doing MIGO
    1. Im entering the reference PO number
    2. Im entering the required details and referring the excise invoice number
    3. Reducing the quantity by half and posting the document.
    Now in the material document when I see the CST amount that got inventorised it is observed that CST amount is getting reduced by half again. i.e.
    -On 1000 tons my CST is Rs. 1000/-
    -In J1IEX I have captured for 500 tons and my CST is getting captured as Rs. 500/-
    -Now in MIGO as Im reducing the quantity to 500 tons (as the qty in PO is 1000 tons)
    -After posting the document value is "material value + Rs. 250 (CST got reduced again by half)"
    The difference is getting loaded on to material during MIRO.
    I'm not able to understand why is this happening. Can anyone give some input on this.
    Regards
    Ayyallas

    hi
    if u need it as separate line item then use NAV  account key against your cst conition (now it must be NVV ) in your tax procedure (t code OBYZ)
    The difference between NAV & NVV is in the Posting indicator
    NAV key has Posting Indicator - 2 Separate line item
    & NVV Has Distribute to relevant expense/revenue items
    regards
    kunal

  • Export or Print different line weights (like in AutoCAD)

    Is there a way to Export / Print / Save As artwork with reduced line weights like you can in AutoCAD? i.e. Export a PDF and all line thickness is reduced by 50%
    I have a map project that I'm working on and I want to export different sections of the map at different scales (different zoom levels) which when you export a PDF, displays line thickess differently for each level of zoom. I'd like to have it setup similar to AutoCAD where I can create a window and now matter what level of zoom, the lines are exported at the same thickness (I'd use Artboards as export windows)
    Sorry if this is confusing!  Is there a Plug-In or another way to do this without physically changing the line weights?

    Do you want a PDF that displays different line weights depending on zoom level? Not possible. Or do you want to export a PDF with line weights different from the ones in your Illustrator file? Possible, even recordable as an action.
    Once the artwork is selected, go to Object > Transform > Scale. Scale to 50% and turn on Scale Strokes & Effects, then click OK. Repeat, this time with scaling set to 200% and turn off Scale Strokes & Effects. Save or Save a Copy, then undo twice.
    Here it is an an action: http://dl.dropbox.com/u/5005292/Set_1.aia

  • Nested tables as separate lines in output

    I'm working with Adobe forms using transaction SFP from the ABAP Workbench. I'm trying to construct a prototype of an SD invoice, with one internal table having the basic item data, and then a secondary table with further information, such as discounts, taxes, etc. The item number is part of both tables so that they can be related to each other. Using right-click and Create in the context I constructed a loop on the main table, and then under that a loop on the secondary table, with the equal item number as a condition. It all works, but in the output the secondary data comes out on the same line as the main item data, and when I try to drag it down to the next line in the layout, it changes its position in the data view also, so that it's outside the loop and prints only once, over the second main item line. Surely for an invoice or a purchase order it's normal to have one basic item line, and then one or more other lines with various other information for each item. It's very easy in both SAPscript and Smart Forms to have a loop within a loop displaying separate lines, but so far I haven't been able to get it to work with Adobe.

    Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> CREATE OR REPLACE TYPE table_type AS TABLE OF VARCHAR2 (8);
      2  /
    Type created.
    SQL> CREATE TABLE r(
      2    a INTEGER,
      3    b table_type)
      4    NESTED TABLE b STORE as b_1;
    Table created.
    SQL> CREATE TABLE s(
      2    a INTEGER,
      3    b table_type)
      4    NESTED TABLE b STORE as b_2;
    Table created.
    SQL> INSERT INTO r VALUES (1, table_type ('a', 'b'));
    1 row created.
    SQL> INSERT INTO s VALUES (1, table_type ('b', 'c'));
    1 row created.
    SQL> COLUMN c FORMAT A10;
    SQL> SELECT r.a, r.b MULTISET UNION DISTINCT s.b c
      2  FROM   r, s
      3  WHERE  r.a = s.a;
             A C
             1 TABLE_TYPE('a', 'b', 'c')
    SQL>

Maybe you are looking for