Exporting spatial data to SHP or TAB file format

Hi,
I have a couple of layers (maps) uploaded as spatial data into an Oracle database. What I'd like to do now is export those maps (data) as standard file format like ESRI Shape or MapInfo TAB file, i.e. write out the data as SHP or TAB file(s) to the disk.
Is this possible?
Any hints, reference or third party solution will do.
Thanks in advance.
P.S. Here is the original process I followed to upload map data to Oracle.
1) I had the map data as MapInfo TAB files.
2) Used the EasyLoader application shipping with MapInfo to upload the data into Oracle.
All I need now is the reverse engineering.

If you want to export to ESRI shape and MapInfo and do not have SDE or MapInfo then I would suggest looking into FME (www.safe.com). Look at the Oracle Suite product. You can download an evaluation product. It will export from Oracle Spatial to both formats.
Thanks
Dave
David R. Miller
Michael Baker Jr., Inc.
3601 Eisenhower Avenue
Alexandria, VA 22304
[email protected]
www.mbakercorp.com

Similar Messages

How to load spatial data from .shp file

Could anyone suggest an easy to use, free tool to upload spatial data from .shp file (or/and other open source spatial file sources) into an Oracle Locator database?
We have licensing for ArcGIS10, but nobody (including ArcGIS) have been able to successfully create a direct connection from their software to our Oracle 10.2 database.
Client desktops here are Windows 7 64bit, which further complicates matters (tend to find neither ArcGIS nor Oracle support 64bit OS in a cogent fashion)

790951,
. . . .You can also try Oracle's ShapeFile Converter (shp2sdo). It's a command line utility so there's automation potential.
. . . .Note that ESRI's tools may (depending on how they're used) store spatial content in Oracle Spatial as BLOBs containing their ST_GEOMETRY data-type (rather than Oracle's SDO_GEOMETRY type).
Regards,
Noel

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

How to upload the data from excel(3 tabs) file to sap environment

Hi all,
This is Mahesh.
how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.

Hi,
The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
You can find a solution for 2 worksheets in this post :
TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
I think you can easily modify it to handle any number of worksheets.
Hope it helps !
Best regards,
Guillaume

Is there any method to export the data from oracle 10g in any format !!!!!

is there any methods to export the data from oracle 10g in the format of excel or csc or txt or anyother. i already downloaded the sql developer tool but it only exports the data of upto one lakh rows ,but i have two tables of more than 3 lakh and 10 lakh rows respectively.for this i used 'where' command to break the file through sql developer but that didnt work
plz help me out if any thing possible
i need to again import this data into microsoft sql if there is any direct method plz let me know
its urgent
Message was edited by:
user628031
Message was edited by:
user628031

Take a look at DUMP_CSV function by Tom Kyte.

Export the data of a chart to Excel format

I developed Histogram and Bar diagram in java Graphics2D pkg. I want to export the data of the chart in Excel format so that the file can be opened in Excel tool.

Is this something that might help....

<%
java.util.ArrayList alDepartments = new java.util.ArrayList();
%>
<select name="DepartmentId">
<c:forEach var="listEntry" items="${bindings.DepartmentsListView1.rangeSet}">
<c:set var="thisdept" value="${listEntry.DepartmentId}"/>
<%
//<c:out value='${listEntry.DepartmentId}'/>
String strThisDept = ((Number) pageContext.getAttribute("thisdept")).toString();
System.out.println( strThisDept );
alDepartments.add( strThisDept );
%>
<c:choose>
<c:when test="${listEntry.DepartmentId eq bindings['DepartmentId'].attributeValue}">
<option value="<c:out value='${listEntry.DepartmentId}'/>" selected="true">
<c:out value="${listEntry.DepartmentName}"/>
</option>
</c:when>
<c:otherwise>
<option value="<c:out value='${listEntry.DepartmentId}'/>">
<c:out value="${listEntry.DepartmentName}"/>
</option>
</c:otherwise>
</c:choose>
</c:forEach>
<%
session.setAttribute("sessionalDepartments", alDepartments );
%>
</select>

Exporting Final Cut Pro Project to .wmv file format

I am a new apple owner and I am doing some editing on FCP. I would like to export my final project to a .wmv file format.
What would you recommend?

Autodesk Cleaner's codecs haven't really been updated in a long time. At $599.00, its a lot to spend for old technology - as for their WMV encoding, they use the WMV 7 codec.
The flip4mac and Popwire programs do a much better job and are more compatible with newer versions of Windows Media Player.
Or, as David Bogie Chq-1 said, you can use the free Windows Media Encoder from Microsoft if you have a Windows system.
-DH

Export Query Data as Pipe or Tab Delimted

Guys could you give me some inputs for this requirment.
I have a query and I need to export the data in the query. I dont need CSV format I need aither Pipe or Tab Delimted. One more thing there are some of the Keyfigures which are calculated in the query i need these as well, So i can do it through ListCube.
Any suggestions? I hope we can using APD but can we export as Pipe or Tab?

By using the tcode:RSCRM_BAPI u can Extract the date into Table or CSV file or save the file to the Application server .
Procedure:
1. Goto RSCRM_BAPI,
2. Choose your query.
3. Choose view and double click on it.
4. Click on Extract(button) on tool bar(top right),
you can specify the file name there, by default it is written in DIR_HOME, you can have a look at it once you have extracted.

Export to Excel from Reports produces corrupt file format

Whenever I choose to export to excel results of custom reports I am unable to open the file as I am told the file format is corrupt. The contents show as containing xml data and even changing the extension from xls to xml does not get me anywhere.
If I save the report and then download I am still informed the file format does not match the extension but the fie will open in Excel.

Hi,
Please raise a ticket or provide the URL if the issue is still there.
Kind Regards,
Alex

Exporting table data to a Comma Separated file / .dat file?

Hi All,
I want to export the table data to a .CSV or .DAT file. This data is an input to other software to read and load like "Informatica".
I tried spooling the file by providing the extension as .CSV but that did'nt work!
Could you please let me know how can I get the data of a table into a .CSV or .DAT file?
I am trying to get it via SQL Prompt.
Thanks in advance.
Himanshu

Take a look to the Laurent Schneider's solution.
Nicolas.

How to export the data to a Excel file

Hi all,
How to use the 'EXCEL_OLE_STANDARD_DAT'
to export the data from itab to EXCEL file.
REPORT ZT11.
data : begin of itab occurs 0,
      t1(3) type c value 'sag',
      t2(3) type c value 'ntc',
      end of itab.
      append itab.
      write : itab-t1,itab-t2.
      CALL FUNCTION 'GET_FIELDTAB'
      EXPORTING
        LANGU                     = SY-LANGU
        ONLY                      = ' '
        TABNAME                   = ' '
        WITHTEXT                  = 'X'
      IMPORTING
        HEADER                    =
        RC                        =
        TABLES
          FIELDTAB                  =
      EXCEPTIONS
        INTERNAL_ERROR            = 1
        NO_TEXTS_FOUND            = 2
        TABLE_HAS_NO_FIELDS       = 3
        TABLE_NOT_ACTIV           = 4
        OTHERS                    = 5
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'EXCEL_OLE_STANDARD_DAT'
        EXPORTING
          FILE_NAME                       =
        CREATE_PIVOT                    = 0
        DATA_SHEET_NAME                 = ' '
        PIVOT_SHEET_NAME                = ' '
        PASSWORD                        = ' '
        PASSWORD_OPTION                 = 0
      TABLES
        PIVOT_FIELD_TAB                 =
        DATA_TAB                        =
        FIELDNAMES                      =
      EXCEPTIONS
        FILE_NOT_EXIST                  = 1
        FILENAME_EXPECTED               = 2
        COMMUNICATION_ERROR             = 3
        OLE_OBJECT_METHOD_ERROR         = 4
        OLE_OBJECT_PROPERTY_ERROR       = 5
        INVALID_PIVOT_FIELDS            = 6
        DOWNLOAD_PROBLEM                = 7
        OTHERS                          = 8
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

Hi, you can even use control technology. There are several example programs how to export data to excel. Please go to transaction SE80. Choose enviroment->examples -> control examples. Take a look at office integration.
/Ernesto

Export to "insert" spatial data

I'm using sqldeveloper-1.1.3.with an 11g R1 database. I'm trying to get the insert statements (including the SDO_GEOMETRY) from a table which I loaded from Shapefile.
I am getting inert statements without any spatial data like below:
Insert into TU (TRID,GEOM) values (100,'MDSYS.SDO_GEOMETRY');
I am using this method: Right-click on the table in the "connections explorer tree", select Export Data, then insert...
Is there any other way to export spatial data to insert sql.

Thnx Irian
I used the same with sql Developer 2.1. It worked fine

Export XML data into multiple worksheet of an Excel file..using FO processr

Hi,
I need to export XML data into Excel output, the data should flow into multiple worksheet of the Excel file.
Let me know if this can be done using XML publisher. If yes, please provide me the steps to do the same.
Could not able to achieve this through by the below process:
(1)     Created a RTF (which has single excel table structure).
(2)     Generated the XSL file using XSL-FO Style Sheet.
(3)     Passed the XSL file and XML
which exported the data into an Excel (single worksheet) format.
Please let me know, how this can be exported into multiple worksheets.
Thanks & Regards,
Dhamodaran VJ.

Hi Dhamodaran ,
pass me the template you created and XML. "Created a RTF (which has single excel table structure)."
Let me have a look at it,
For ID, look at profile.

Exporting form data to a single table

I have created a form in LiveCycle Designer ES 8.2 and simply want to export the data into a single table that I can then import into Access. It appears that in LiveCycle the row elements of a table are children of the table element and the column elements are children of the row elements. I am wondering if there is an easy way to design a form in LiveCycle so that each cell of a table is a root element like the rest of the fields in the form. I basically want to export one row of data from each form and append it to a larger table. Exporting the data as csv or tab-delimited would be sufficient, but neither of these appears to be an option.

The only way I've found to do this is to open the form in Acrobat, click Forms, mouse over Manage Form Data, then click Export Data. Your only options are to save as .xml or .xdp. I saved my data as .xml. I was then able to import the .xml file into excel by clicking Data, mousing over xml, clicking Import... and browsing to the Acrobat generated .xml file. I know this is convoluted but it's the only way I've found to get the data into a spreadsheet. Acrobat exports the data as filename_data.xml, i.e. a form named contacts will export it's data as contacts_data.xml. Be aware, I've only tested this on a form that had a table in it and nothing else. If your table is part of a form with other fields in it I have no idea how the other data will look after exporting.

Problem in Exporting Dashboard data using IR 9.3.0

hi all,
I am working on Hyperion IR-9.3.0. I have two OLAPQuery sections (as OLAPQuery & OLAPQuery 2). I am collating the data from these two
OLAPQuery Sections into a single Dashboard.After doing so I am exporting data present on DASHBOARD to PDF format using
ActiveDocument.Sections["Dashboard"].Export'',(bqExportFormatPDF,true,true,true);
I have succeded in performing above steps.
Now my problem is the number of columns after collating both OLAPQuery section becomes 18. But after Exporting(Dashboard) To PDF format i
can view only 13 columns. I tried exporting after reducing column width to lowest size possible but still i can't export complete data to PDF.
So how to EXPORT complete data from DASHBOARD to PDF file?
Thanxs.

Did you used query section or pivot section in the dashboard

Exporting spatial data to SHP or TAB file format

Similar Messages

Maybe you are looking for