Extend filter criterias in: MDS_LOAD_COCKPIT

Hello experts,
I'm using mds_load_cockpit for massdata replication in one-client scenario (SRM@ERP) - replication tests were successful (vendors and materials). Now I'd like to use filter criterias to get the desired vendors and material ranges because I'dont want all vendors or materials to be replicated.
My first step was using the listed filters (listed as "fieldnames") in mds_load_cockpit.
But there are only a few fields available which set the criterias:
-Vendors: Account Group, VendorID, Centr.Del Flag
-Materials: DF at client level, mat.group, mat.ID, mat.type
These don't fit my filter requests...
Is there there any way to extend these criterias?
For example like in transaction R3AC1 (which i cannot use in one-client-scenario) for "r/3 material master".
I'd like to use this for materials--> Table: MARA-MAGRV
For vendors i'd like to make a limitation on purchsing org, but I dont know how to do this.
Any suggestions how to proceed? Maybe there is a table where I can maintain/create new entries for my own crits listed as "Filedname" in mds_load_cockpit for filtering.
Could anyone give me a hint?
BR, Patrick

hi
i have a big problem during using mds_load_cockpit
when i click on product category->material group and un select backround proccess and execute the transaction i have terminated in program
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           SAPLMDS_LOAD_BRIDGES
Application Component AP-MD-BF-SYN
Date and Time          10.06.2014 09:39:47
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Long text of error message:
     Technical information about the message:
     Message class....... "MSI_PRODCAT_CUST"
     Number.............. 303
     Variable 1.......... 1
     Variable 2.......... 432339
     Variable 3.......... " "
     Variable 4.......... " "

Similar Messages

Filter criteria in ALV report not working

Hi,
In ALV report , when i click on filter button , it does not filter the report according to the filtered criteria. this happens in the cases where the selection criteria is a lengthy field. when i debug after the filter criteria it goes into standard function.
i am using REUSE_ALV_GRID_DISPLAY
is there any way in which i can correct this?
thanks,
Amit
null

chk this useful thread
Re: ALV problem (with filter use)

Adding "Filter Criteria" to the XSLT List View Web Part impact on "Export to Excel" functionality within Document Library

Hi there,
XSLT List View displaying all the list items within the Document Library. In order to implement the Search functionality within Document library out of box "Text Filter" web part is configured as explained below. The solution is similar to
the one suggested at
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=77
"Text Filter" Web Part added to the page.
Filter Criteria (i.e., XSLT List View columns) added to the XSLT List View where the filter parameters take the input from the "Text Filter" Web Part .
3. Both Web Parts (XSLT List View and the Text Filter) are connected.
When the search criteria is entered into the "Text Filter" Web Part, it is passed to the relevant Columns of the XSLT List View and the documents (List Items) that match the search criteria are shown within XSLT List View.
Search functionality working as expected.
Query: Selecting the "Export to Excel" icon from the ribbon generates the excel spread sheet with no data except Column Titles from the Document library. In the investigation it is
found that adding the 'Filter Criteria' on XSLT List View is causing this bug. When the Filter Criteria is removed, then "Export to Excel" functionality is working as expected.
But it is mandatory to add "Filter Criteria" to implement the search functionality with in the document library.
Help: Help/input appreciated on the work around to get the "Export to Excel" functionality work when the "Filter Criteria"
exist on the XSLT List View.
Regards,

Once again thanks very much for your help Scott. very much appreciated.
In the investigation it is found that removing the 'Filter Criteria' on XSLT List View makes the "Export to Excel" functionality work. But the 'Filter Criteria' is mandatory to get the 'Document Search' functionality.
I think that due to technical limitations it should be concluded that 'only custom development can make all work, no code solutions using the SharePoint Designer can meet all the requirements.
If you can think of any alternative solution that could help in resolving the current issue or fix the issue without any custom implementation please inform. Otherwise this issue would be marked as resolved with your suggested response.
Regards,

CRM 7.0 = ECC 6.0 Upload: Filter criteria for BUPA_MAIN

Dear Experts,
concerning filtering of BUPA_MAIN in CRM 7.0 => ECC 6.0 Upload we have already learned from SAP (to our surprise) that the only way is to redefine publication BUPA_MAIN as "simple intelligent" (Standard is simple bulk). BUPA_MAIN as "simple intelligent" offers a couple of fields (e.g. partner_no, is_customer) which can be defined as filter criteria.
We have the requirement to filter by a bp status field which is not part of this set. By the way, we expected the filtering in object management (TX R3AC1, filters are only valid for ECC=>CRM Dowload) or at least in the TX CRMC_BUT_CALL_FU by registrating a ZFunction module in CRM outbound for BUPA_MAIN. Under certain circumstances the later leads to errors in the subsequent middleware processing.
Has anybody a similiar requirement or does face the same problems?
Thanks for your help.
Regards, Mark

Hi Mark
Please put this request in the correct forum of CRM Middleware.
I am sure your will get the right help from the middleware experts.
Regards

Issues with Search Filter Criteria Button in Search Help

Hi ,
I have applied an elementary search help to a select option and this help is having four fields. The search help works fne and all the four fields are visible when i do a F4. Now , if i want to restrict the number of entries shown (the number of entries are huge) by clicking the "Search Filter Criteria" button , i dont see any of the four fields using which i can restrict the data . Do we need to do any configuration for this ??
Regards
Mayank

Hi,
in that search help itself you have a option called maximum number of hits, there is a impact if you restricted also.
Thanks & Regards,
Srinivasan.R

QBE filter criteria in adf richtable disappears

Hi,
i use jdeveloper 11g (11.1.1.0.2) with ADF BC and have the following Problem:
I have a table with enabled builtin filtering. The table is contained in a page fragment of a taskflow.
At runtime I am doing the following:
1) I submit a filter criteria and get the right result. (OK)
2) goto different page and back to the page with the filtered table (OK)
3) the table displays the filtered data, but the filter input field is EMPTY (ARGGHHH, very confusing)
If you create the exact table on a simple page (not in page fragment of taskflow) the filter criteria is still shown in the filter input field as expected (and designed I think)
So is it a bug? How to work around?
Thanks,
Andreas.
Edited by: koppy on May 28, 2009 9:15 AM

Hi,
I have not tried this , but it should work
you need to get the value of filterModel attribute of af:table
so, in your backing bean if you can get hold of your table component
store your filterCriteria somewhere while navigating between pages
RichTable myFilterableTable = this.getMyFilterableTable(); //assuming your table component is associated with backing bean
FilterableQueryDescriptor queryDesc = myFilterableTable.getFilterModel();
//get teh filtercriteria from fiterModel
Map<String,Object> filterCriteriaMap = queryDesc.getFilterCriteria();filterCriteriaMap will contain your QBE criteria values , re-set your table filterModel , you can use EL to do that in which case now its binded to your backing bean filterCriteriaMap
hope it helps
Good Luck
regards,

Filter Criteria will not save in SharePoint Designer

I have a web page that contains form webpart (for entering search keywords) and a dataview with successful configuration to sql database table.
In SPD > dataview > Common Tasks:
I have created parameter with control type and texbox control ID. Then setup the web part connection to link both web parts.
In the final step I then try to set the filter criteria and choosing columns with available option of parameter name and click ok. The filter values disappear.
I have followed the steps from the following link:
http://andyparkes.co.uk/blog/index.php/2008/10/31/creating-a-multi-column-search-form-in-sharepoint-v3-with-sharepoint-designer/
Why does the Filter criteria not save?
Thanks in advance.
-- techChirag

Hey, I dont suppose anyone's found a solution to this yet? I've succesfully done this on a few different Site Collections, but for some reason it's not working on my latest one. As above, after setting the Filter Criteria and saving the page in SPD2010,
the filter criteria just dissappears. Random!

Filter Criteria in Value Help for InfoObject

Hi,
Is it possible to remove the value from Filter Criteria. When I use F4 for a Field (in Screen) , its showing a poup window (Value Help for Info Object) with some personal values. When I click "More Values" option its showing the General Value List, where I can see the Filter Criteria. When I click "Show Filter Criteria", its showing the Criteria with a Value (This value is coming from the field(Screen) from where I am coming). is it possible to avoid of passing value from my screen field to Filter Criteria ?
Thanks
Srinivas

Murugan,
I really hope that the moderator do not remove my points for this!
WebDynpro ABAP Select-Options and OVS Help.
How to Achieve OVS Search Help in Select Option in Web Dynpro ABAP
How to Use OVS Help For Multiple Input Fields in Select-Options.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/707f0d73-94f0-2d10-97a2-a3776e2118d8?QuickLink=index&…
Using Select Options in a Web Dynpro(ABAP) Application
Regards,
Ashvin

Set filter criteria on page 1 for page 2 OData model - "best practice"?

Hello, I have a problem with an app - where I want to filter data on a second page, based on settings from the first page. I use an OData model.
The collections on both pages are not related in terms of "navigation" properties, that is my problem and I can not change the data source...
So I am looking for ideas/best practices to solve this because sometimes my filtering doesn't work... the following problem occurred: Request aborted
I have a page with a sap.m List with items="{/tabWorkPlace}" and and a local JSON model where I store relevant data during the app lifecycle.
handleListSelect - first page
var context = evt.getParameter("listItem").getBindingContext();
var dataModel = sap.ui.getCore().getModel("dataModel");
var workplace = context.getProperty("WORKPLACE_ID");
dataModel.setProperty("/WORKPLACE_ID", workplace);
this.nav.to("SubMaster", context);
The general App.controller.js handles the nav.to function:
var app = this.getView().app;
var page = app.getPage(pageId);
if(pageId == "secondPage") {
page.getController().filterData();
And the controller of the second page:
filterData: function() {
var oModel = sap.ui.getCore().getModel("odata");
var dataModel = sap.ui.getCore().getModel("dataModel");
var workplace = dataModel.getProperty("/WORKPLACE_ID");
var items = this.getView().byId("list");
var oFilter=new sap.ui.model.Filter("WORKPLACE_ID",sap.ui.model.FilterOperator.EQ,workplace);
items.getBinding("items").filter(oFilter);
I don't write this code into the onInit() or beforeRendering() function, because they are called only once and I am navigating back and forth between the two pages, because the pages are created only once and "just" the data is changed.
The desired page looks like this - with an other collection bound to it:
<List
id="list"
select="handleListSelect"
items="{/tabWorkstep_Status}"
>
But when I call it - then the request gets aborted:
The following problem occurred: Request aborted
But despite the fact the Request is aborted, the list on the second page is filtered!
The filter criteria for the model works when I type it into the browser with URL. Maybe this fails because the data binding for the list didn't took place at this phase?
I have this pattern (filter criteria on one page and result on the second page) more times - (and I think a better data model would be better with navigation properties would be better, but I cannot change it)
But at another constellation the filtering doesn't work - same error... the following problem occurred: Request aborted
I also don't want to change the pattern (page 1 to page 2) into popup lists or this fancy new filtering possibilities because it is not suitable for my use case.
Is there maybe a more elegant solution - because sometimes filtering works, sometimes don't..., do I have an error in my solution (general approach)?
Many thanks for any input!
BR,
Denise

Hello, yeah you are right, but it works without the odata> stuff because of this in App.controller.js:
var uri = "http://localhost:32006/JsonOdataService.svc";
var oModelMS = new sap.ui.model.odata.ODataModel(uri);
sap.ui.getCore().setModel(oModelMS, "odata");
oView.setModel(oModelMS);
So my question is - how to navigate from one page to another - and on the other page first bind a collection to a select and then when selecting bind certain elements (a textfield) to the selected filtered entity.
The stuff with context and binding won't work, because the two Collections don't have a navigation/association property between them...
So for example:
page1
select a list item with property color: red and year 1985. Press one of the buttons and pass this criteria to another page.
page 2:
show a dropdown box with all car names which fullfill this criteria, and when one car is selected, then display the data for THIS car in several text fields.
This is not a master->detail navigation example, because on page 1 i select certain criterias, and then with buttons I navigate to several pages with those criterias.
But since the OData model has no relationships it is really hard to do it manually... With a dummy mock.json like in DJ Adams Fiori like SAPUI5 apps it is no problem... But with OData and no things related to each other it is hard...

How to read disqualified rows after filter criteria is applied?

Hi,
I Use JDeveloper 11.1.2
I have a view object, which shows 100 records during initial time. I've applied filter criteria in such a way that it displays only 20 records.
One of my requirement is to surf the records which are disqualified for the filter criteria (i.e. I should be able to read the rows that are not participated in the filtered View object)
I didn't find any API for this.
Can anyone help me on this?
Thanks in advance.

There its no api for this. All you can do is to either requery without the filter, or to negate the filter and then query again. Still you have to do this yourself.
Timo

Middleware-Filter criteria for Transactions replication.

Hi Experts,
Can we use filter criteria while transferring transactional data from CRM to R/3.
Like i want to restrict the replication of transactions of some BP's who belongs to one particular region. Based on the region field can i put the filter criteria for the transactions.
Points will be rewarded.
Thanks in advance
Nadh.

Hi Nadh,
I dont think if it will work. As this object is used for BulK messaging, hence you will not be able to create filters.
Regards
Keshav
PS: Please reward point if the info is useful.

Retrieving sort and filter criteria for interactive report

I have developed a test management system in APEX. Users log in and see an interactive report with their assignments. Each test they've been assigned occupies one row.
There is an "Execute" link for each row that takes the user to the test execution page, where they can see the input steps / expected results and report the test passing or failing.
I've implemented "Next >" and "< Previous" buttons on the execution page, so the user can immediately go forwards or backwards in his assigned tests without having to return to the assignments page and click the Execute link on the next or previous row.
The test execution page figures out what the next and previous assigned test is using the LAG and LEAD functions, like this:
lag(assignment_id) over (order by ref_num_full) prev_id,
lead(assignment_id) over (order by ref_num_full) next_id
Notice that I've "hardcoded" the over clause to be the reference number of the test.
The problem here - this solution ignores any custom sorts or filters the user has put in place on the assignments (interactive) report.
Is there a way I can "grab" the interactive report (1) sort criteria and (2) filter criteria dynamically? I'm thinking I could then use dynamic SQL to build an OVER clause used in the lag/lead calls so that the application now follows whatever sort and/or filter criteria the user has put in place.
Any help is greatly appreciated...thanks!!

Thanks WTine!
I took a look and determined
- I can get the sort criteria from the APEX_APPLICATION_PAGE_IR_RPT view (SORT_COLUMN_# and SORT_DIRECTION_# columns)
- I can get the filter criteria from the APEX_APPLICATION_PAGE_IR_COND view
Regards, Rich

Filter Criteria with where condition in graph api query

Hi
Filter criteria in graph api is working fine through this api
https://graph.windows.net/adummydirectory.onmicrosoft.com/users?$filter=displayName eq 'Ashok'&api-version=1.5
Select criteria is also working fine through this api
https://graph.windows.net/ adummydirectory.onmicrosoft.com/users?api-version=1.5&deltaLink=&$select=displayName,accountEnabled
But when I am combining both query that means, I want that select criteria should also apply with filter clause like
https://graph.windows.net/adummydirectory.onmicrosoft.com/users?$filter=displayName
eq 'Ashok'&api-version=1.5&deltaLink=&$select=displayName,accountEnabled
But its generating error
    "odata.error": {
        "code": "Request_UnsupportedQuery",
        "message": {
            "lang": "en",
            "value": "Unsupported expression node type 'Equal' for Where expression."
So please suggest how we can use select clause with filter criteria. our requirement is that we don’t need all attributes .we want selected attributes for filtered users.

Greetings!
The differential query syntax does not allow for a filter other than $filter=isof(<directory entry type>). You are not able to use any other query string for this type of query. Please see the following MSDN link for details:
http://msdn.microsoft.com/en-us/library/azure/jj836245.aspx
I will need to do a bit more research to see if it is possible to request specific attributes for an object query and post back to this thread when I have a response.
Regards,
MaxV ( MSFT )

Sum the value of look up table based on two filter criteria

Hello Everyone
I am new to Powerpivot and would appreciate if someone could help me on the following problem.
You can download the example of this excel file form the following DropBox link:
Dropbox Link
The first table is tOrders
Week number
Work center
order number
Production time in minutes
2
a
111
60
2
a
112
70
2
b
113
60
3
b
114
50
3
a
115
40
3
b
116
60
4
a
117
90
4
b
118
40
The second is dLookupList
Week number
Work center
mantenace in minutes per week
Break dows in minutes per week
2
a
10
10
2
b
20
5
3
a
15
12
3
b
30
10
4
a
20
10
4
b
10
10
I’m trying to create Pivot that has filter on Week number to show the number of orders, Sum of Production time in minutes and the total of the values form the lookup table dLookupList that matches the work center and the selected week
numbers. So that I can calculate the total time for each work center. Filter criteria is Week number and Work center.
For example if someone select all weeks numbers the result sould look like this
Week number
(All)
Work center
Count of order number
Sum of Production time in minutes
mantenace in minutes per week
Break dows in minutes per week
Total time
a
4
260
45
32
337
b
4
210
60
25
295
Grand Total
8
470
Result for week 2
Week number
2
Work center
Count of order number
Sum of Production time in minutes
mantenace in minutes per week
Break dows in minutes per week
Total time
a
2
130
10
10
150
b
1
60
20
5
85
Grand Total
3
190
How can I relate these two tables to get the above result?
Any help is highly appreciated.
Regards
Priyan

Hi Recio
Thank you very much for the swift response. I was able to get it work.
I got two questions:
How do you add a total time column to the pivot table like you did? Because there are no calculated field in power pivot.
I prefer that the filter is based on the Orders table. So that if you select all Week numbers in the filter, that pivot will show result for all orders and relevant sums from the lookup list.
Link download the example file
For example: I add Week number 5 to the work center “a”
Week number
Work center
WNandWC
mantenace in minutes per week
Break dows in minutes per week
2
a
WN2WCa
10
10
2
b
WN2WCb
20
5
3
a
WN3WCa
15
12
3
b
WN3WCb
30
10
4
a
WN4WCa
20
10
4
b
WN4WCb
10
10
5
a
WN5WCa
1
1
In the orders table there are no records for week number 5
Week number
Work center
WNandWC
order number
Production time in minutes
2
a
WN2WCa
111
60
2
a
WN2WCa
112
70
2
b
WN2WCb
113
60
3
b
WN3WCb
114
50
3
a
WN3WCa
115
40
3
b
WN3WCb
116
60
4
a
WN4WCa
117
90
4
b
WN4WCb
118
40
4
a
WN4WCa
119
50
But the pivot sums up the week number 5 also.
Do you have any idea how to solve it?
Thank you very much.
Regards
Priyan

Interactive Reports - Filter Criteria Using Other Operators

Currently using version 3.1.2.
Is there any way to specify the operators that are used for filter criteria on an interactive report?
Trying to specify the following criteria...
LASTNAME like 'B%'
OR
LASTNAME like 'A%'
The interactive report uses an "AND" in this case instead of an "OR".
Any ideas?
Thanks,
Kris

Any comments would be very much appreciated.
Many thanks

Extend filter criterias in: MDS_LOAD_COCKPIT

Similar Messages

Maybe you are looking for