Extending the timeline in Photoshop CS6

In CS6, I cannot find the option to extend the duration of my photoshop document.  I am using Photoshop to make a short hand-drawn animated film.  Currently, the document is 300 frames long, but I would like to extend that to 400 frames.  Can anyone help, please? (I'm working in timeline mode, not frame mode.)
I could easily change the duration of a document in CS5 by clicking on the little drop-down menu in the top right corner of the animation panel, then going to "Document Settings" where I could change the duration and the frame rate.  When I click the drop-down in CS6, I find the frame rate option, but no duration.
It seems like this is a simple necessary option, and I hope I'm just missing something very obvious here.
Thank you for any help you can provide (including alternative workflows.)
-Justin

I agree.
But I dont think in general there is enough help or control in using timeline animation
For example on my site I run a monthly animation comp. And alot of my members are new to animating (Im by no means an expert lol) But as its Xmas its an ideal theme for animating.
We have a size limit for each animation of 5MB which as you all know isnt a big size animating.
So they set their timelines to say 3 seconds and do each of their relevent timelines. Some upto 6/7/8 seperate ones which for beginners is pretty good. But there end results are normally over size 1st time checking.
The problems occur when they want to alter the lenths of the timeline. Its easy enough to shorten the lenths of the whole timeline lenth thats not a problem BUT its when we try to alter the duration and speed of EACH timeline is where the problem lies.
We cant move the keyframes in a timeline all together so we have to drag each keyframe to another position and of course it mucks up the animation as they dont end up in the right places thus screwing up the sequenc
All we need is some sort of control to alter each timelines length and speed or to select all the keyframes on an individual timeline so we can move them all together. Because if we change the length of f the timeline now the keyframes stay where they are and dont move to compensate for the alteration..
The only other way is to remake it which is a bugga lol
Message was edited by: Unionjack
It doesnt seem that anyones interested in helping or commenting on this problem. Yet Im sure they appreciate us paying amazing money for the various applications.

Similar Messages

  • Minimizing Mini-Bridge & Timeline in Photoshop CS6

    Quick question that I can't figure out.  How do I minimize the Mini-Bridge and Timeline in Photoshop CS6?  I have draged the window section as far down as possible.  But, I have seen some PS6 screenshots were the timeline and mini-bridge lay flush with the bottom of the screen.  And, once I do minimize them, how do I bring them back up again?
    Thanks!
    Kirsten

    Hello again!
    Have you tried double-clicking on the panel tabs? Tha tabs display the names of the panels (Timeline and Mini-Bridge)
    This should minimize the panels - to open them, you can just double click the tabs again.
    Please post again if you have additional questions
    Cheers!
    Kendall

  • I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

    I ask the third time:
    How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
    It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
    It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
    hope of feed back: e-mail: [email protected]

    Chris Cox answered your question here:
    I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

  • New to creative cloud.  Downloaded a trial but am struggling to work my way around it.  Is Photoshop CC 2014 the same as Photoshop CS6?

    New to creative cloud.  Downloaded a trial but am struggling to work my way around it.  Is Photoshop CC 2014 the same as Photoshop CS6?

    yes the creative cloud Photoshop cc 2014 is the latest and the current version of the Photoshop

  • What is the upgrade top photoshop cs6?

    What is the upgrade to photoshop cs6?

    There is no traditional upgrade from CS6 to what would normally be "CS7".
    The next version after CS6 is Photoshop CC and it's only available by subscription to the Creative Cloud.
    http://www.adobe.com/products/creativecloud/buying-guide.html

  • Adobe Download Assistant does'nt start the download of Photoshop CS6 trial automatically. What shoul

    Adobe Download Assistant does'nt start the download of Photoshop CS6 trial automatically. What should I do?

    There are direct downloads at http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Follow the instructions extremely carefully to get access to the files.

  • Extend the timeline by copy paste

    I'd like to copy and paste a set of keyframes and frames at the end of the exisiting timeline... maybe several times to extend the timeline.
    However I've been a bit flumoxed as to how a simple chore like that is done.  It does not appear one can copy the frames, then set the cursor at the end and past the frames ahead of cursor,
    Or do I have to create multiple layers to get the same effect by placeing them end to end down the timeline.
    In the included screen shot, I'd like to copy/paste the frames on layer1 on down the time line but still on layer 1.
    As you can see I've started using layers to create the same effect... but is that really the way to do it?

    meglomor wrote:
    click on frame 1 of layer one
    hold down shift and click on the last frame in layer 1
    (the entire span of tweens and keyframes will be selected)
    release the mouse and shift
    hold down pc:ALT mac: Option and click anywhere in the selected/highlighted tween span and drag the frames to the right.
    this technique will work on multiple layers as well.
    Ahhh cool.  A little different than some applications but still sort of obvious now I see how its done.
    Thanks

  • Photoshop CS6 is downloaded even though the link states Photoshop CS6 Extended.

    Hello!
    A few days ago or so, I had downloaded Photoshop CS6 from the official Adobe site here (http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop), and wanted to only test it out. However, I did a very stupid thing and uninstalled all my Microsoft Visual C++ products, not knowing that these were important for Photoshop. Anyways, Photoshop was having all errors etc. and I had to uninstall it (the 30 days weren't over yet, by the way). Now I have downloaded the Microsoft C++ products again, and I wanted to download Photoshop CS6 Extended again - it all was installed it perfectly, but when I opened the program, it was just Photoshop CS6 and not Photoshop CS6 Extended (and I want it because of the 3D options etc.) - and I was using the same download link from above. So, why has it downloaded the "wrong" product now?
    Thanks!

    The installation is one and the same software, only a serial number differentiates the feature set. 
    It's not supposed to be able to show you just non-Extended features in evaluation mode, however.  I don't honestly know what to advise, other than maybe to do a full and complete removal, including use of Adobe's Creative Suite Cleaner Tool, then install it yet again.  Perhaps trying to run it in a damaged state triggered some of the GPU detection logic to fail and deconfigure Photoshop's use of the GPU.
    Since it is allowing you to continue your evaluation period, there's hope.
    Creative Suite Cleaner Tool:  http://www.adobe.com/support/contact/cscleanertool.html
    -Noel

  • Installing the educational version Photoshop CS6 Extended

    Hi
    I have the CD version of Photoshop CS6 (educational version).   I have received my verificaton serial number.
    However when I try to install it it only asks for a 6 digit number?    Which I dont have.    I have tried logging onto the education site but I am still asked for a 6 digit number.
    Please can you advise?
    Thank you

    Can you please post the screenshot of the probelm.

  • The update for Photoshop CS6 Creative Cloud (64bit) downloads but failsto extractand install

    The Adobe Application Manager reports an update for Photoshop CS6 Extended but when I tell it to update, it goes through a download and reports "Unable to extract downloaded files. Press retryto download again. U44M11210"
    Repeated attempts to download and install have failed.

    Try http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • Photoshop CS6 Extended starts instead of Photoshop CS6

    I have a licenced copy of Photoshop CS6 in my Windows 7 computer. Today, when I start CS6, CS6 Extended starts instead, in trial mode. Control Panel Install/deinstall shows I have CS6 installed. I don't want to deinstall because I can't get into CS6 to deactivate it. Maybe I have to wipe the PC and return to a recent full backup, but is this my only alternative?

    Refer to this:
    Sign in or activation errors
    Mylenium

  • How do i adjust the contents on one layer at a time and not the whole image - photoshop cs6

    hi
    i am creating a photo thing in photoshop cs6 and i have a mountain behind a layer that is visible and in total i have about 6 layers and when i try to change something on layer 6 (so somehting like the saturation and hue) it changes whats on layer 5, at the same time, so how do i make it so i just adjust the contents on layer 6?
    thanks
    mrredrunner100
    ps thought this might help
    https://drive.google.com/file/d/0B1KO1zQcxYLWazZNRDh1Q3ZaMmc/edit?usp=sharing

    hello.....
    while on the  adjustment layer the properties panel will show a button that looks like so:
    if you select it the adjustment will only be applied on the layer below and the adjustment layer will look like so.
    hope that helps.

  • How do I start the script for Photoshop CS6 in Bridge CS6 image processor ?

    I am new to Bridge and I am lookiing for a way to batch process images. I opened 'preferences' and did not find Photoshop CS6 under the script list. How do I open and run the image processor? Thanks for any help!!

    I have clicked on 'tools' within Bridge but there is no 'Photoshop' in the drop-down menu.
    Misread your post a bit and see you want the image processor, however, this should be in the same location as the Batch option. If you don't have Photoshop in that list it means the start up script is not active or not installed properly.
    First check Bridge preferences / Start up scripts and see if Photoshop is listed inhere and has a checkmark in front. If no checkmark then set it to on, restart Bridge and try again. If no Start upScript at all first try restart Bridge holding down option key (Mac) or ctrl (Win) and choose reset preferences.
    If still no luck try a reinstall of PSCS6 to also reinstall Bridge again. (you first have to uninstall PSCS6, be sure to have a back up of custom settings etc).

  • 'You cant open the application Adobe Photoshop CS6 because it may be damaged or incomplete'

    This Message appears after clicking on the icon after installing from creative cloud. Can't try installing again as AAM says that it is already installed.
    Installed on iMac OSX 10.6.8

    After several days of this annoying me and trying various different things, I finally found the solution!!
    Open Terminal and run this command and it will reset the launch services to let it work properly.
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.fra mework/Versions/A/Support/lsregister -kill -domain locat -domain system -domain user
    The problem began for me once I removed photoshop because the update kept failing.  So I uninstalled photoshop cs6 using their uninstall script, and then re-installed it with the creative cloud application manager.  From then on I could not "double click" on a .PSD to open photoshop directly, but "open with" would work.  Very strange.. but the above command fixed it.
    Here are some screenshots of the issue:

  • How do I change effects in 'Altered Video' timeline in Photoshop CS6?

    I added a filter to my video but it only lasts for a few frames. There are little marks shown where I added it in the Altered Video section of the timeline.
    How do I apply a filter or effect to the entire clip?
    Also when I ad a filter such as Lens Correction, it only lasts for a few frames..How do I get it to remain?

    I was going to Move that thread for you, but could not get it to go to Photoshop General Discussion - that option was grayed out.
    Maybe Pierre, who Replied in that thread, will have more access, and can accommodate you.
    Good luck,
    Hunt

Maybe you are looking for

  • Return free goods

    Hi experts, Is the only way to receive returns of free goods by using MB1C? U know, the goods is sent to customer without selling price, i.e. no A/R exists. When customer return those goods, it seems not proper to use return order. The return order w

  • 808 Belle FP2 gallery missing features

    Nokia 808 Belle FP2's gallery is still crippled. There is no way to organize photos into folders or tag them in any useful manner. And there no possibility to select multiple items for sharing etc. Gallery cannot zoom images that are downloaded to th

  • I cant open my trash

    Whatever I do, I cant open my trash. Ive tried relaunching finder, and "killall dock" and "killall finder" in terminal. Nothing works. ans when i look up trash in spotlight I get a error. I dont really get how terminal works either.....

  • Disk Cache memory problem

    Hello, I am using 5.5 AF (Mac) my Disk cache memory was full. Whenever i start application I got this massage & its effects on speed. Can some one guide me how do I clear it? Thanks.

  • Automatic database activation

    hi, Suppose we have two mailbox servers: Node 1 and Node 2 in a DAG with two databases: A and B. A is mounted on node 1 and B is mounted on node 2. Now Node 2 suffers a hardware failure, a windows failure or lost its connectivity to databases (their