Extension and windows 8.1 64 bit PROBLEM ( big)

Hi
I don't know if the error occur since i upgrade to OS windows 8.1  but  i can't  view the windows area  of the extension manager .
the icon  in the windows bar is here so application is running but no way to see the windows area .
when i i want to install a zxp  , i can't install the pay application i bought  for the adobe product i have ( CS6)
I hope i am not the only one i have this problem and feedback from users ll help adobe team to take this problem in account
for update the installer tool !!
Perhaps there is a CLI way to install the a zxp like bower ? grunt ? 
regard's
CLI = command line interface

You can always use CLI tool to install/disable/enable/remove an extension. For CS6 and earlier, refer to
http://www.adobe.com/go/em_file_format. For CC, refer to http://helpx.adobe.com/extension-manager/using/command-line.html.

Similar Messages

  • HP Photosmart C4780 and Windows 8.1 -64-bit - Problems installing driver, plus wireless assistance

    Hello
    Apologies, I am technically challenged, so I hope I can explain myself. I have the above All-In-One Printer/ Scanner and now have a newish laptop with Windows 8.1 etc etc. I have incurred ongoing problems trying to scan documents to my laptop. I have managed to deduce that my printer driver has not installed. I have followed instructions from one of your help pages and downloaded whatever I needed to, however the driver is still not present.
    I read a solution offered through the Forum back in June 2014 about doing some form of reset. What exactly does this entail and will this result in me losing all settings/ favourites etc on my laptop?
    I am just trying the 'unplug the printer for 60 seconds thing' as also suggested to someone in May 2014. In the meantime if someone could get back to me anyway, I'd be grateful. I desperately need to rectify this problem, which I've been putting off for a couple of months as I need to scan alot of documents urgently.
    PS - can someone also talk me through how to get the wireless facility up and running after all these years!
    Many thanks, Amanda

    Hello @AmandaGreyUK , and welcome to the HP Forums!
    I see you're running into driver issues.  I would like to help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Hi...I have a Macbook mid-2009 which has both Mac OS Mountain Lion and Windows 8.1 32-bit?Is there a way to install bootcamp on the windows side?

    I have both  Mac OS Mountain Lion  and  Windows 8.1 32-bit installed....The machine is Macbook Mid 2009...Whatever i do i can't install and use bootcamp on the Windows side.........Apple Support says it only supports Windows 64-bit  which my machine cannot install.......and when i tried to install Bootcamp 4 it says it only supports Windows 7 .........Is there no way to install and use Bootcamp without buying another computer?

    Boot Camp - Apple Support
    Boot Camp- System requirements for Microsoft Windows operating systems

  • I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?

    I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?
    Many thanks for any advice.
    David

    You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

  • Problems with Fingerprint Reader on Touchsmart TX2-1274NR Notebook and Windows 7 Ultimate (64-bit)

    I have just upgraded my tx2-1274nr to windows 7 ultimate (64-bit) [my university released the upgrade a week early] and I followed the directions provided by technical support and downloaded/installed all the updated drivers and software.  Everything works great (actually better than great) except for two problems.
    The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
    This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters?  I am not sure if this is important.
    Any assistance would be greatly appreciated.  I am really loving the new system, especially the multi-touch (installed the drivers from N-trig)!!
    Thanks

    Hi,
    dclane wrote:
    The fingerprint reader does not work. It shows up in the device manager, but when I try to register a fingerprint, Windows says no reader found.
    Check this and this thread. You need Authentec TrueSuite.
    dclane wrote:This problem is not really effecting the performance, but it states on the device stage that I am missing a driver for the keyboard filters?  I am not sure if this is important.
    If You have any version of Quick Lunch Buttos installed uninstall them and install this here which is provided by HP for Win7.
    Message Edited by Daniel_Potyrala on 10-16-2009 12:35 AM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • LaserJet 2200 and Windows 7 Professional 64-bit - a mutual disagreement society?

    In upgrading my XP Professional system to Windows 7, I've got a real problem linking to my LaserJet 2200d printer. The store that did the upgrade mistakenly upgraded to 32-bit Windows 7, but the printer worked fine. In doing the proper upgrade to 64-bit 7 Pro, a problem arose - nothing prints and the data light on the Laserjet 2200 does not even flash. Observables:
    1. I've tried all the 64-bit drivers published from Microsoft via Windows Update and from HP. Nothing works, including the universal printer driver and regressing to the 32-bit driver.
    2. The printer shows as installed, but with a yellow, triangular warning sign, yet there are no details on the problem or suggested fixes.
    3. Windows Troubleshooter doesn't fix the problem.
    4. I thought to uninstall all the drivers and start fresh, but links to HP's driver uninstaller yield a "page no longer available" error message.
    I use this printer as my workhorse - sure would appreciate some help. I'm a nontechie, so step-by-step instructions would be very helpful. Thanks!

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at HP Enterprise Business Community.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • IdeaPad Z370 and Ubuntu 11.10 64 bit - problem with volume buttons

    I recently bought my new Lenovo IdeaPad Z370 without operating system and installed Ubuntu 11.10 64 bit (the pre-installed system was FreeDOS which I decided to remove).
    Nearly all is working fine. The only exception are the volume keys: pressing them does start adjusting the volume, but causes a system problem. If I press sound up, the speakers move to immediately to the maximum volume and behave as it I was continuing to press the button.
    The same happens when pressing the volume down or sound off buttons. It is then not possible any more to use the keyboard or type anyting, nor change the volume using the touchpad and Ubuntu's speaker symbol. It is also not possible any more to shut down the computer using Ubuntu's virtual shutdown button, but with the real button on the computer.
    The touchpad is still working and after putting the computer briefly into standby the problem is solved to the degree that it is possible to use the keyboard etc. again, and the sound volume can be adjusted again with Ubuntu's speaker symbol.
    I guess this must be a driver issue that ubuntu 11.1 does not support the buttons.
    As well, the one-key-theatre button and the thermal-management button do not work. Pressing them, just nothing happens (except that the light up).
    I should mention that installing Ubuntu apparently deleted the partitions including the one-key recovery button. At least this key does now only work like a second power-button. Unfortunately I did not receive the User-guide with the computer but only downloaded from the internet after installing Ubuntu.
    I wonder whether apart from adjusting the volume buttons, it might be possible to get the one-key-theatre button and thermal-management-button operational for ubuntu too, and whether the one-key-recovery button could work under ubuntu too. Gparted tells me that I have 2 small partitions of 3.9 GiB each, labeled "extended" and "windows swap", and one of 1.02 GiB which is not in use apart from the main drive of course.

    The issue you are encountering is due to driver absence in Linux.
    The driver for Linux is not available.  Hope, Ubuntu new version have more applications and drivers.
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Oracle 11g R2 to MS Access .mdb (Windows Server 2008 64-bit) problem

    I have a need to make connection from Oracle 11g R2 to MS Access database file (mdb). OS is MS Windows Server 2008 64-bit. My configuration is next:
    1. I made System DNS mikeacs (using c:\windows\sys_wow6\odbcad32.exe) to my access mdb file;
    2. I made initmikeacs.ora file in ora_home\hs\admin folder:
    # HS init parameters
    HS_FDS_CONNECT_INFO = mikeacs
    HS_FDS_TRACE_LEVEL = debug
    HS_FDS_SHAREABLE_NAME = c:\Windows
    3. Listener.ora file is:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\Oracle\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:C:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (SID_NAME = mikeacs)
    (ORACLE_HOME = c:\oracle\product\11.2.0\dbhome_1)
    (PROGRAM = dg4odbc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = cspo02)(PORT = 1521))
    4. Tnsnames.ora is:
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    MIKEACS =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521))
    (CONNECT_DATA=(SID=mikeacs))
    (HS=OK)
    5. After this, I restarted Listener:
    lsnrctl stop;
    lsnrctl start;
    Given feedback:
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
    Start Date 20-RUJ-2010 14:47:21
    Uptime 0 days 0 hr. 0 min. 3 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
    Listener Log File c:\oracle\diag\tnslsnr\cspo02\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "mikeacs" has 1 instance(s).
    Instance "mikeacs", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    6. I created db link: create public database link macs using 'MIKEACS' (connected as sysdba);
    7. tnsping mikeacs:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)) (CONNECT_DATA=(SID=mikeacs)) (HS=OK))
    OK (0 msec)
    Then, when I try fire query (connected as sysdba): select * from mytable@macs;
    get result:
    ERROR at line 1:
    ORA-28513: internal error in geterogeneous remote agent
    ORA-02063: preceding line from MACS;
    Although, when I fire the same query, but connected as other user, get next result:
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Microsoft][ODBC Driver Manager] Data source name not found and no default
    driver specified {IM002}
    ORA-02063: preceding 2 lines from MACS
    Where is my problem? Please help. Thanks in advance!

    That's the problem. DG4ODBC on 64bit Windows is 64bit and thus it also requires a 64bit ODBC driver.
    If you don't find one - maybe you can install DG4ODBC 32bi on a 32bit platform (please do NOT install it on the 64bit Windows machine) and then use this 32biit DG4ODBC with the 32bit ODBC driver.
    Another option would be to purchase a commercial ODBC driver or a bridged ODBC driver.

  • Flash Player in Windows 8.1 64 bit problems .....

    Hi. I have just installed Windows 8.1, but have problems with the embedded Flash Player in Internet Explorer.
    Starting Internet Explorer from the Desktop causes no problems. In particular (in case this has any bearing), going to BBC.co.uk, Sport,Formula 1, and playing videos there uses Flash Player with no problem.
    Starting Internet Explorer from the Start screen (the Graphical one!) opens BBC.co.uk fine, through Sport to Formula 1 - OK. Even before I try to play any of the videos, attached to each video is a message telling me that I have the wrong vesrion of Flash Player, and invites me to download the correct one. Trying this brings an error message saying that Flash Player is an integrated part of I.E., and will not allow me to download. Attempting to "update to the latest version for Win 8.1" gives me the same message. The reported version I have is 12.0.0.77, the O.S. is Windows 8.1 (64 bit), but the Browser reported is NONE. I have checked that Flash Player is enabled, and visited Manage ..... I cannot find a problem. Can someone cast any light?

    Using the non-desktop version of IE11 is where we see this most often. The problem can be summed up in three words:
    "User-Agent Strings"
    That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
    Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
    The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
    Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
    They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. I've read elsewhere that Opera in "Turbo Mode" is the best for viewing ANYTHING at bbc.co.uk. "Turbo Mode" enables proxy viewing, which apparently helps with the bbc site.

  • IMac 2008, Boot Camp 5, and Windows 7/8 32-bit & 64-bit

    I am interested in installing Windows 7 via Boot Camp 5 on my iMac (see sig) but I'm confused as to whether or not my mac is even capable of installing Windows 7 at all. Let me explain.
    According to THIS support article, Boot Camp 5 dropped support of Windows 7 32-bit whereas Windows 7 64-bit remains supported alongside the newly supported Windows 8 64-bit. So far, so good. But according to THIS support article (scroll down to "Boot Camp requirements by Mac model" and click on "iMac"), my mac model (iMac 24-inch, Early 2008) only supports Windows 7 32-bit as of Boot Camp 4 and that Windows 7 64-bit and Windows 8 64-bit are not supported for my model. ???? That's the crux of the conundrum I'm facing.
    So my question is this: can someone give me a definitive answer as to whether or not my iMac is capable of installing and running Windows 7? What about Windows 8?
    My sincere thanks in advance.

    The truth is that you can run Windows 7 and Windows 8, in both 32 and 64-bit versions, without any problem (you have a 64-bit processor). The problem is that Apple only supports a 32-bit Windows 7 version for your Mac. Why? Because Apple wanted to drop the Windows 8 support for the computer you are using.
    You can see in this page all the Macs compatible with 64-bit Windows editions > http://support.apple.com/kb/HT1846 As you can see, your Mac isn't supported, so you can only install a 32-bit Windows 7 version with Boot Camp if you want to run Windows correctly.
    I told you at the beggining that you can install any 32 or 64-bit Windows 7 and Windows 8 versions on your Mac because your iMac meets the requirements for both editions. However, you need the Boot Camp drivers to make Windows run properly, and here's where Apple has dropped a lot of computers, making them unusable if you install a version that Apple clasifies as unsupported. Sad but that's true

  • SAP Backup Service  SAP 8.8 and Windows 2008 R2 64 Bit

    Dear All ( Mr Gordon)
    I am facing problem with the Backup Service on windows 2008 R2 64 Bit.
    1)The Service starts - There is no Issue
    2)THere is no Backup - Even though i schedule it perform the backup
    3)EvenLog has a lot of messages -   Messages says some Dll are Missing or Corrupt.
    COmpletely Uninstalled the Server Tools and Reinstalled back ,still there is error.
    PLease help !
    Best Regards
    Dayal

    Dear Dayal,
    Thank you for your trust on me. To be honest, I never use SAP Backup Service. This is because: SQL Server provides its own Backup Service. No other vendor can compete with its build in function.
    Thanks,
    Gordon

  • Officejet 8600 Pro and Windows Server 2003 (32 bit)

    The company I am consulting for purchased three 8600 Pro printers to replace three older and non-working printers. They are still using XP Pro on their workstations and running Windows Server 2003 (32 bit version) on a file server and data server. All of the workstations have the drivers for the 8600 installed and are printing with no problems through the network. I checked the driver page on HP's site and there are no drivers listed for the 32 bit version of the server OS, only the 64 bit version. I need to install the printer drivers on these servers to be able to print reports without having to purchase another printer. Has anyone found a workaround to this problem or do I have to install one of the older printers in order to print and fax from the servers? I really can't shut down these servers in order to reinstall the 64 bit version of the OS.

    Hi,
    Install the software using the command prompt, the software do supported on Windows Server 2003 but its installation process is different.
    Follow these steps to install the printer on the server:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=4323659&tmp...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Premiere Elements 10 and Windows 8.1 64 bit System

    Every time I try to sign in premere elements 10 appears to stop responding. I have tried reinstalling it since I am running windows 8.1 64 bit system and it appears that it keeps installing the 32 bit version. I am using the second disk that is provided, that it indicated that I should use for the 64 bit system. Any clues as to what is happening?

    SJHarris101
    The first question is "Do you have the latest version of QuickTime installed on your computer with Premiere Elements 10?"
    Are you working with the program as Run As Administrator or from a User Account with Administrative Privileges?
    Next, because of the current epidemic of display problems for Premiere Elements 10 users with NVIVIA video cards, I will ask "Does your computer use a NVIDIA video card? Do you have the latest driver installed? May need a roll back. But because of your Premiere Elements 10 Windows 7 vs Premiere Elements 10 Windows 8.1, I am not certain this may affect you. Nonetheless, please check it out.
    http://forums.adobe.com/thread/1317675
    I have Premiere Elements 10, 11, and 12 successfully installed on Windows 8.1 64 bit. The video card is Intel HD Graphics and no problems.
    Important to know, "What are the properties of the video that you are importing into the project?" And "What have you or the program set for the project preset based on the properties of those source media?" Based on what I have read of your camera, you are probably dealing with Full 1080p30 (H.264.mov) with Stereo. If so, is your project preset
    NTSC
    DSLR
    1080p
    DSLR 1080p30
    (See Edit Menu/Project Settings/General).
    Right now I am pointing to your video card
    a. if NVIDIA, possible need for video card driver version roll back
    or
    b. if not NVIDIA, possible need for video card driver version up date according to the web site of the manufacturer of the video card.
    But, let us see where your details lead us.
    Thanks.
    ATR

  • HP 6735s with Radeon HD 3200 and Windows 7 RC - screen brightness problem (+)

    Hello.
    I installed a win 7 rc 64x on my HP 6735s and surprised when find brightness control did not work correctly. When i try move brightness slide bar in power plans or in win+x app it slide back to minimum right now. However, sometimes it changes to 70% and brightness change too, but only in this session - logoff, reboot or hibernate - and brightness again goes to minimum. 
    fn+f keys dont work at all, only in bios stage.
    I tried all drivers i can find - ati whql for win7, ati beta, hp keys for vista 64 - its all dont work. What can i do else? HP engineers know about this problem? In ms forums only one solution - hp will release correct drivers before win 7 starts. 

    Just go to www.hp.com -> Support & Drivers -> Step1: Download drivers and software (and firmware) -> Step 2: 6735s (your laptop model), GO -> Select HP Compaq 6735s Notebook PC -> Microsoft Windows Vista Business (64-bit) -> HP Quick Launch Buttons.
    In fact, it's the same version for all Vista Edition, just choose 32-bit or 64-bit.
    Regards.

  • Access connections 5 version 5.83 and windows 7 Professional 64-bit

    This is the first time I use this forum, please excuse me for any mistakes. I have just installed windows 7 professional 64-bit on a thinkpad T410 and downloaded the access connections 5 version 5.83. My access connections profiles have been exported when my laptop was under win XP and have been imported under win7. The problem is that although they do function, both WLAN and LAN type of connections, I cannot have two connections (one LAN and one WLAN) running at the same time, something that it could be done under winXP. One thing that I've noticed in the profiles, that is grayed out now, which I was able to control under winXP but now I can't, is the "disable this wireless radio when switching to a different location" for WLAN profiles and
    "disconnect form the network when switching to a different location" for LAN profiles. These two profile parameters helped me achieve simultaneous connections. Why are they grayed out and how can I correct this issue? Regards Marios S.

    hey Marios,
    could you uninstall both wireless and wired network drivers from your system and then let win7 install its native drivers.
    once done see if it happens again. also i recommend removing all network profiles and start fresh.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

Maybe you are looking for