External Handling Unit (Barcode) Information is Missing

Hello Folks,
I got a requirement where a warehouse will send us an EDI 945 file to confirm the shipment completion. But, it send us the file without SSCC labels for those shipped items of the order. This 945 is being translated into a SHPCON IDOC(DELVRY03) which doesn't contain the E1EDL37(Handling unit header). This IDOC is failing in status 51 with the error message: External Handling Unit (Barcode) Information is Missing.
What should be done to get this IDOC posted sucessfully even if it doesn't contain the SSCC label? Is there any setting that should be changed for this customer to not to look for SSCC labels(External Handling unit).
Thanks for your help,
Siva

This could be because of custom code. Check the exits in inbound FM and you should find out the root cause. Standard SAP doesn't check for customer level SSCC checks. If it gets the HU's from 3PL, it'll pack it such way. If it doesn't, it'll pack is the usual way.

Similar Messages

  • Configuration of external handling unit number range

    Hello everyone,
    I am working on a project that includes receiving of handling units from outside of our SAP system in EAN128 format, and am running into some challenges in setting up an appropriate external handling unit number range.  The process will involve creation of an inbound delivery from an advance ship notice, with the delivery to then be packed based upon handling unit information in the ASN.  I have set up an external number range interval in the number range object that is being used for generation of internal handling unit numbers, with the external interval being outside the range of the existing internal intervals.  When the ASN is posted, the inbound delivery is created but cannot be packed (status 52), and I get a message stating "The check digit of SSCC 10000001000001648 is incorrect. 5 is correct" (just using this number as an example).  In this case, the HU number actually had a leading zero, and changing the sample HU to start with a 5 results in the same message but stating that 0 is correct, which is kind of maddening.  The bottom line is that I have not configured an external number range before for handling units and am clearly missing something here.  Has somebody set this up successfully and can share your experience, or can point me to some good documentation?  I am searching OSS, the Business Process Expert Community, and the overall web in general and am not finding any relevant information.

    Per your info,
    in std, You cant maintain HU number ranges with respect to year.
    Still if you want to maintain, You have to use Userexit for Number ranges.
    Generally, all sales documents number ranges are not year specific . ONly FI documents are year specific.
    Why you want to have Year specific number ranges for HU's? - It is nothing to do with Year.
    Convince your client, This year dependant HU number ranges doesnt carry any value addition. Still client insists, only way to achieve this is "USEREXIT_NUMBER_RANGE"
    hope it helps

  • How to fetch external handling unit# using delivery#

    Hi Gurus,
    Please tell me relationship how to fetch the VBEP-EXIDV(external handling unit)    Using LIKP-VBELN(Outbound Delivery no) .
    Any suggestions welcome.
    Thanks in advance,

    Table vekp has a field SPE_DELDEC.
    Also if field STATUS = 60, its deleted.

  • External handling unit number range upload

    Hi all,
      what would be the configuration procedure to upload the inventory with an external HU number range for legacy inventory and moving forward using the internal number range for new HU's created. should the HU unique check box needs to be disabled?
    Appreciate any thoughts on this.
    thanks.

    Per your info,
    in std, You cant maintain HU number ranges with respect to year.
    Still if you want to maintain, You have to use Userexit for Number ranges.
    Generally, all sales documents number ranges are not year specific . ONly FI documents are year specific.
    Why you want to have Year specific number ranges for HU's? - It is nothing to do with Year.
    Convince your client, This year dependant HU number ranges doesnt carry any value addition. Still client insists, only way to achieve this is "USEREXIT_NUMBER_RANGE"
    hope it helps

  • External System Handling Units to SAP ECC System and Pack Outbound DO

    Hi Guru
    Packing Is done in External System for SAP ECC Sales Order Before Outbound Delivery Creation.
    How to  capture External System Handling Units in to SAP ECC System and Pack Outbound Delivery Line Items.
    Please help
    Thanks In Advance
    SR

    Bit of a cart-before-the-horse situation here.
    Lets assume that your business process goes ahead and creates a delivery note, but leaves it unpicked and unpacked.  Picking and packing will occur with the inbound IDoc from your external system.
    Map the external system data into a basic IDoc type DELVRY0X.  I think the current one is DELVRY07. 
    Use an inbound IDoc message type SHPCON to carry the external system data into your ECC system. 
    The process code DELV works well with DELVRY0X inbounds.  It has lots of user exits.  You will need them because you will need a determination process to know which delivery note to update with the external system data.
    When you map the handling unit data correctly into the IDoc, the process code will create the handling units on your delivery.  The external handling unit numbers should end up in VEKP- EXIDV.
    Regards,
    zKen

  • Handling Unit Link (VEKP-EXIDV) in inbound/outbound delivery

    Hello,
    I need to code the automation of logical pick and pack tasks in the trading company such that the following fields of the outbound delivery are automatically populated based on the corresponding fields from the inbound delivery:
    1.) Pick Quantity (LIPSD-PIKMG) comes from the pick quantity from inbound delivery to trading company
    2.) Batch Number (LIPS-CHARG) comes from the batch from inbound delivery to trading company
    3.) Handling Units (VEKP-EXIDV) comes from the handling units from the inbound delivery to trading company.
    I've found a way to link the outbound to it's corresponding inbound delivery through table EKES (link of stock transfer order number to the inbound delivery), however I could not find the link of the stock transfer order to the handling units (VEKP-EXIDV).
    Any idea on this?
    Thanks.
    Sincerely,
    Ice

    //What I found was that VBFA-VBELN = VEKP-VENUM, given that VBFA-VEBELV = inbound directory (LIKP-VBELN) and VBFA-VBTYP_N = 'X' (handling unit).
    From that link I was able to get the external handling units (VEKP-EXIDV) since the key VENUM has been identified.
    During the pick and pack i have to link the LIKP+LIPS  and VEKP  for handling unit and internal identification number.
    VBFA is for sales document flow which is helpful for forward and reverse navigation to itdentify the documents .
    Inputs for the Feed has to be from LIKP / LIPS and VEKP
    Please refer to tcode VL02N and in here check Packing options with all the subscreens of Packing Hu's and Single entry .
    regards,
    vijay

  • Available Handling Unit

    Hi All!
    In T-Code VL02N we have the outbound delivery overview and we do the processing of handling units here.
    Now i have a requirement where in i have to suggest the user with the available Handling units which can be used for packing.This value i will display in a form.
    I am not able to identify this field and also not sure whether this is available in the DDIC or whether it has to be dynamically retrieved through BAPI's or FM's
    EXIDV gives the external Handling unit no but i want the collection of these available.
    Can anyone throw light on this.
    Regards
    Praneeth

    Hi,
    Check the tables VEKP(Header) and VEPO(Item) tables.
    Regards
    vijay

  • Attaching Handling Unit ID to Inbound delivery (Vl32N)

    Hello All ,
    I am trying to attach External handling unit ID to the Inbound delivery (Vl32N) .Iam using WS_DELIVERY_UPDATE ,but somehow its not working .can u help whether there are any other functions that will do this ??
    Thanks .

    Hi,
    Try with PROCESS_HU_INBOUND_DLVRY, WS_DELIVERY_UPDATE, SD_DELIVERY_UPDATE_PACKING
    Thanks,
    Abhijit

  • Packing multiple materials in one Handling Unit

    Dear Friends,
    In an outbound delivery, I want to pack 8 materials in one single External Handling unit.
    How should I use this?
    Presently I am using BAPI_HU_PACK 8 times to do this in a loop & passing the same HU in parameter
    BAPIHUKEY-HU_EXID for all the time but with ITEMPROPOSAL which is different all the time.
    Is this the right way to pack multiple materials in the same HU?
    Please share your experience..
    Thank you.
    Regards
    Prashant

    Hi,
    Please explain a little more clearly.
    Do you have an existing HU and you just want to assign it to the delivery or you want to create the HU also.
    Please check how it is executed when working online.
    HU that you want to assign to the delivery should have same/equal materials as that what we have in delivery.
    Please check this out.
    Regards,

  • REJECT_CODE Vendor information and/or Operating Unit information is missing

    hi
    i am using Oracle Applications : 11.5.10.2.
    i am trying to load suppliers and suppliers data into oracle AP.
    i tried doing this with some sample data.
    i executed the following code below :
    insert into AP_SUPPLIERS_INT (VENDOR_INTERFACE_ID, VENDOR_NAME, SEGMENT1, STATUS)
    values (*10006*,'XXX Financials2','199999','NEW');
    i then ran the following process:
    Supplier Open Interface Import
    the supplier was added without errors
    i then inserted a record into the
    AP_SUPPLIER_SITES_INT table :
    vendor_interface_id =*10006*,
    LAST_UPDATE_DATE= SYSDATE,
    LAST_UPDATED_BY          ='123',
    VENDOR_SITE_CODE = 'true test' ,
    CREATION_DATE     =SYSDATE ,
    CREATED_BY     ='123' ,
    PURCHASING_SITE_FLAG= 'N' ,
    PAY_SITE_FLAG     = 'Y' ,
    ATTENTION_AR_FLAG     = 'N' ,
    ADDRESS_LINE1     ='gmmm df' ,
    ADDRESS_LINE2     ='gmmm dfdv' ,
    ADDRESS_LINE3     ='gmmm dfvdd' ,
    ADDRESS_LINE4     ='gmmm dfvdd' ,
    PAYMENT_METHOD_LOOKUP_CODE='Check' ,
    TERMS_DATE_BASIS     ='Current' ,
    ACCTS_PAY_CODE_COMBINATION_ID     = '1365' ,
    PREPAY_CODE_COMBINATION_ID     = '1470' ,
    PAYMENT_PRIORITY     = '99' ,
    TERMS_ID= '10001' ,
    INVOICE_AMOUNT_LIMIT =20,          
    PAY_DATE_BASIS_LOOKUP_CODE     = 'DISCOUNT' ,
    ALWAYS_TAKE_DISC_FLAG= 'A' ,
    INVOICE_CURRENCY_CODE     ='JMD' ,
    PAYMENT_CURRENCY_CODE     ='JMD' ,
    HOLD_ALL_PAYMENTS_FLAG='N' ,
    HOLD_FUTURE_PAYMENTS_FLAG     ='N' ,
    HOLD_UNMATCHED_INVOICES_FLAG= 'N' ,
    EXCLUSIVE_PAYMENT_FLAG= 'N' ,
    EXCLUDE_FREIGHT_FROM_DISCOUNT     = 'N' ,
    ORG_ID= '142' ,
    CREATE_DEBIT_MEMO_FLAG= 'N' ,
    OFFSET_TAX_FLAG= 'N'
    i then ran the following process:
    Supplier Sites Open Interface Import
    the process completes with a status of 'Normal'.
    below is an extract of the output :
    Supplier Sites Open Interface Import Execution Repor Page: 1
    Import Options: All
    Batch Size: 1000
    Print Exceptions Only: No
    Sites Open Interface Audit Report
    Org Id Supplier Number Supplier Name Site Name
    Total Sites Imported: 0
    *** No Data Exists for this Report ***
    Sites Open Interface Rejections Report
    Org Id Supplier Number Supplier Name Site Name Reason
    Total Sites Rejected: 0
    when i checked the AP_SUPPLIER_SITES_INT table ,
    the REJECT_CODE field has the value *'Vendor information and/or Operating Unit information is missing.'*
    I THINK ALL THE REQUIRED FIELDS ARE POPULATED
    why am i recieving this error ? is this caused by a bug? is there a required field that i didn't populated ?
    please help me to solve this ....
    thanks much!!

    Hi,
    Could you please check : Doc ID: 316368.1 of Metalink...
    Symptoms_+
    The Supplier Site Contacts Open Interface Import program is not importing certain contact
    information.
    The Supplier Site Contacts Open Interface Import Execution Report shows the following Rejection
    Reason:
    Vendor information and/or Operating Unit information is missing
    Cause_+
    The Last_name field is a required field.
    As per the Oracle Payables User's Guide.
    Appendix G-111
    AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
    Solution_+
    As per the Oracle Payables User's Guide.
    Appendix G-111
    AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
    If you test this out directly in the Suppliers window in Oracle Payables:
    Navigation: Suppliers-Entry
    Queried up a Supplier, then clicked into the Site field under the Contact tab.
    Entered the contact information and omitted the Last Name, when trying to save the record,
    the system gives the following message:
    *'FRM-40202: Field must be entered' and the cursor is on the Last Name field. This is a required*
    field and is the intended functionality.
    Hope this will help
    Regards,
    S.P DASH

  • Vendor information and/or Operating Unit information is missing.

    Hi,
    I am new to the interface and learning programing can any body pls help me on this accept i will be thank full
    I am running AP_SUPPLIER_SITES_INT and i got an error as
    Vendor information and/or Operating Unit information is missing.
    and also pls give me the diff b/w org_id and operating unit why the tables end with _all.
    Thanks in advance
    Thanks and regards
    Goutham
    Message was edited by:
    goutham konduru

    check out these:
    http://www.oracleappshub.com/oracle-application/_all-tl-vl-vf_vl_a_avn-and-what-else/
    http://www.oracleappshub.com/beginner/understanding-multi-organization-structure-in-ebs-part-1/

  • "Current assignment" field missing in Handling Unit status tab

    Our scenario is as below:
    1. STO created and outbound deliveries generated
    2. Deliveries are assigned to shipment
    3. Packing is done using RF transaction
    In the normal scenario, the HU status tab would show the outbound delivery number in the current assignment tab. But for some Handling Units, the current assignment field shows blank. Also, the contents tab shows only the delivery line item number and not the delivery number. We have also noticed that the problem delivery line items have been packed in 2 different Handling Units, each containing the full delivery line item quantity. (not sure how this is possible). One of the HU is displayed correctly but the other one has the missing delivery number issue.
    Has anyone encountered such a scenario? How is the system allowing to pack the same delivery item quantity in 2 different Handling Units? Any suggestions in this regard would be very helpful.

    Hi,
    Thank you very much...
    i have another doubt.....
    i am unable to understand determination of packing instructions.
    where it is linking i am confused.
    we are assigning the determination procedure in the T.code
    OVHU2.(Maintain Packing Transaction Profile in IMG).
    my doubt is where we are assigning this Transaction Profile in Handling Units.
    Please help me....
    with regards

  • Printing Barcode for a 18 digit SSCC No (Handling Unit Number) thru' VL02N

    Hi,
    I'm trying to print a Barcode for a corresponding Handling Unit number in VL02N transaction code.
    I have created a new device type by name ZBARCODE in SPAD transaction, the Device Type name is:
    ZLB_ZEB  and Spool Server is:  fihdev02_FDV_00
    In SE73, have created a new System Bar Code by name ZZEAN128 with the following parameters
    00   00    10.00   CM      2.00   CM  C128            000      .
    In the Printer Bar Code option, ZBARCODE device type has been selected and in the Display Print Control page ZZEAN128 Bar Code, Prefix and Suffix has been assigned to the ZBARCODE Device Type.
    In the copy of the LE_EAN128_SSCC00 Form I have assigned the ZZEAN128 Bar Code as a Character Format.
    But, it is not printing the Barcode in the ZEBRA 110XI Printer.
    How to overcome this problem.
    Kindly guide me to fix it.
    Thanks in advance,
    -- Jessica

    I have solved it myself.

  • Shipment cost information  - handling units

    Hello ,
    ( After reviewing notes 393849, 934370 , 746606  )
    i  have a problem with shipment cost information from sales
    order ( VA02 ; VICI ) when the shipment cost is calculated according to handling units.
    In our S.C.C regular scenario the shipment cost is calculated according to the packing materials in the shipment ( VT02 ) .
    The pricing procedure includes the follwing condition records :
    Condition y050 :  Calc.type - S ( number of shipping units ) ;
                      Calc.base - C ( Handling units ) .
    and a few conditions with the same definition as : 
    Condition y051 :  Calc.type - S  ( number of shipping units ) ;  
                      Calc.base - '' ( ALL ) .
    ( in order to overcome regular S.C.C customization the above  
      p.procedure is determined in exit -  shipment costing : configure 
      pricing - V54B001 - EXIT_SAPLV54B_001 ) .
    After filling the necessary fields in VA01/VA02 such as Material , volume , weight , packing proposal and then executing  the shipment cost information according to the planning profile we get error message
    ( VY-140 ) :
    " shipment cost not saved because they contain no items " .
    After debugging in   - EXIT_SAPLV54B_002  : none of the handling units in VA01/VA02  ( packing proposal )  is transferred to pricing structure "KOMP" and therefore the shipment cost calculation is
    not completed ( to my best knowledge . . . )  .
    when proccessing the transactions online VA02->VL02N the packing proposal is  transferred as expected .
    any ideas ?
    Regards
    ASA

    Hi Sudeer,
    Once again please check the configuration steps
    -->Define Shipment cost information profile
    -->Assign planning profile
    -->Also check the variants which you are maintaining in the planning profine.
    -->Check the input data in the variants which you have maintained.
    Go through this link about Shipment Cost Information in the Order
    http://help.sap.com/saphelp_47x200/helpdata/en/83/218ac8068a11d2bf5d0000e8a7386f/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • Missing Handling Unit

    Hi All,
    I have a delivery with 3 line items.
    One of the operators forgot to create a handling unit for item 20.
    Is there a tcode I can use to create a handling unit and assign that handling unit to my delivery?
    Please help.
    Meghna

    What T code you are using to create HU (Which u mentioned yours operator missed)
    You can create HU and then in VL02N assign the HU number in packing button.
    Or
    You can create directly from VL02N through the packing button
    Regards,
    Vishal

Maybe you are looking for