External Speaker not Working Properly

Ok, i have this annoying problem with the external transducer...basically sometimes it works and sometimes it doesn't.
This kinda disrupts all the allarm options as i can't rely on a device that "eventually" will work.
This is the second iPod Touch i change and the problem is the same so i guess it is not an hardware fault but most likely software.
Has anyone ever encountered a problem like this one?
Message was edited by: OneOfTwo

RRFS Northern Nevada
Re: External speaker port not working 
May 11, 2012 8:25 AM (in response to Tremolo Arm)
A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
PROBLEM SOLVED!!
Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
This is a very inexpensive solution and works great for me.  I'm listening to my Bose speakers now and they sound great!!  Thank you to all of you for your suggestions and help troubleshooting.

Similar Messages

  • My macbook pro external speaker not working! help please

    My macbook pro external speaker not working! help please

    1. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
         Pllug in the speakers.
         Do they show up?
         Make sure that Mute is not enabled.
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • IPhone4S external speaker not working

    i hv try clear the headphone jack but not working,
    clear the dust outside the speaker not working
    what else can i do, as i don't want to update my mobile which it might coz all the memories within the mobile lost....
    what to do??

    RRFS Northern Nevada
    Re: External speaker port not working 
    May 11, 2012 8:25 AM (in response to Tremolo Arm)
    A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
    PROBLEM SOLVED!!
    Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
    http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
    This is a very inexpensive solution and works great for me.  I'm listening to my Bose speakers now and they sound great!!  Thank you to all of you for your suggestions and help troubleshooting.

  • External iSight not working properly, please offer advice

    I purchased an original iSight after having problems with my USB cam. I just did a clean install of Leopard on my mac pro. The USB cam would get errors in iChat such as "Camera in use by another application, etc).
    I uninstalled the iChatUSBcam software, checked the Library/quicktime folder, etc.
    I hooked up the iSight and it seemed to work, then the video went a bit haywire. I thought it was just a glitch, but when I tried to video chat, the other user could not hear my voice. I checked the System pref sound input and it was on the iSIght, but the meter was not responding properly.
    I thought it may be a hardware issue, so I tested the iSight on my mac mini (G4) - It worked perfectly.
    I have uninstalled iChat and reinstalled it from the Leopard disk. Still no go...
    Does anyone have any thoughts?

    Hello mlevack
    You have tried a lot of things. Here are a few ideas you can consider.
    (0) Check for possible hardware or software conflicts.
    (1) With all unnecessary peripherals disconnected, try any suggestions you have not yet used from How to test your iSight to ensure it is functional.
    (2) Try testing with some of the computer saavy human testers in Ralph John's list of Contact Testers. I know the page says for iChat 2.1 and 3.x, but you should be able to test with them. Ralph and some of the others also have iChat 4 if testing with that becomes necessary.
    (3) If you are willing, post your chat name in your Biography or some other location in your Public Profile, and I will try to contact you for a test when I am on-line.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5)  External iSight

  • External speaker not working

    On a new iphone 5, my external sound (speaker) doesnt work for any application (itunes, ring tones, messaging etc).  I backed up my old iphone 3 and sync'd onto new device, but I'm not sure if the external sound worked before (ie in factory new condition).  The internal jack seems to work fine.
    Any suggestions?
    Thanks
    GP

    When the ringer switch is on (not vibrate) and you are in the phone with the screen on, press the volume controls on the side of the phone. If it says "Ringer (headphones)" then your phone is stuck in headphone mode. That means it will only play sound hooked up in a dock audio system or through the headphone jack.
    The sensor that tells the iPhone that the headphone is plugged in is faulty or dirty. I have the same problem and no solution has worked. You may also try cleaning out the headphone port with 409 and a qtip with half the tip cut off.
    I've tried both solutions to no use and will probably have to go to an apple store.
    I also cannot talk on the phone without a headset or a bluetooth device.

  • External Drive Not Working Properly

    I have a 30GB Lacie Drive I use to transfer data between my imac and my macbook (both are intel machines) - since upgrading to Snow Leopard, it no longer seems to be working properly. It lets me upload some smaller files onto it, but whenever i try to transfer a larger file, it stops after a few seconds and says that there is already a file by this name. I have tried doing a repair on the drive, but it still does not work. any ideas?

    I have a 30GB Lacie Drive I use to transfer data between my imac and my macbook (both are intel machines) - since upgrading to Snow Leopard, it no longer seems to be working properly. It lets me upload some smaller files onto it, but whenever i try to transfer a larger file, it stops after a few seconds and says that there is already a file by this name. I have tried doing a repair on the drive, but it still does not work. any ideas?

  • External speaker not working anymore

    I just got an iPhone 4 yesterday. The external speaker was fine until I hooked it up the earbuds. I removed the earbuds and now I cannot hear anything from the external speaker. I can't hear my phone ring. I can make a call, but can't use the speaker option. Can't hear music unless I put in the earbuds or hook it up to my home speaker.  I tried unplugging the speaker cables a few times like someone said in another forum. That worked for a little while, but then the sound went away again. I tried rebooting.  Help.

    I know this might sound stupid but, you do have the ringer volume turned up don't you. The only reason I ask is, I did exactly the same thing this morning, took me 15 mins before I realised what I had done.

  • IOS 6 update = Speaker not working properly

    My speaker was fine and I have no reason to believe there are any hardware issues. As soon as I updated my iOS 5.1.1 to the new iOS 6 it stopped working and now I can't listen to music or watch videos on my iPhone unless I insert a headphone!
    What's happened and how can this be resolved?

    Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
    P.S. And yes, I've rebooted both numerous times. This has no obvious affect.

  • External superdrive not working properly

    Hi, I have a 2012 MacBook Pro and I just recently upgraded to Yosemite. My external superdrive will play audio disks in iTunes but, when I try to burn a playlist iTunes cancels the burn with "unknown error occurred (-50)" Also I can't eject the superdrive when I go into Finder under devices. any help is appreciated thanks

    Just about any external optical drive, other than Apple's, will work. For exampe, this one recommended by Macworld:
    http://www.amazon.com/AmazonBasics-Writer-External-Optical-Drive/dp/B003M0NT1M?t ag=gmgamzn-20

  • Audio in left speaker not working properly

    Hi I recently have bought the HP ENVY 27 and I'm having trouble with the audio. Whether I pay music through the built in speakers or through the headphone jack in the monitor the left speaker seems to be a LOT (at least 50%) quieter than the right speaker. At first I thought the speakers weren't leveled/balanced out but I checked and they are 50/50. Any ideas on how to fix this?

    Ok so I just plugged the monitor into my PC through the front headphone jack and it's working fine, it must be the jack at the back of my PC that is messed up! 

  • Speaker not working properly iPhone 4S

    Hello. I got my iPhone 4S wet (oops) and I have no sound when playing videos or music but it still rings when I get calls/texts, other than that it's working fine. Any ideas??!!

    Clean very well the iPhone charging port with toothbrush and small amount of Isopropyl Alcohol. If still problem consider replacing the iPhone charging port assembly with flex cable and lower mic, about $5 part. Water damage can be long term progressive worsening problem. Consider gdgmacguy advice and go to Apple.

  • My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

    My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

    Hi Venkata from NZ,
    If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

    Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

    Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
    Many thanks.

  • My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    You need to get some software that allows your Mac to read and write to the NTFS disk.  There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free.  I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac.  You don't need NTFS anymore, unless you still have a Windows computer that needs it.

Maybe you are looking for

  • Write error on vbox and linux 4

    my database can not update in a linux86 host on window64's vbox, dmesg as MSI INIT SUCCESS PCI: Setting latency timer of device 0000:00:0d.0 to 64 ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:0d.0: flags:

  • I can't buy mountain lion in app store.

    I can't buy mountain lion in app store. info "Payment processing is temporarily unavailable. You may continue to browse the store. Please try to make your purchase later."

  • I cannot open a recent item. Is it lost forever?

    I had an important document that my MacBook autosaved for me, so I opened the autosaved version and began editing it extensively, after finalizing it I (stupidly) saved it under the same autosave name. Now my document folder is only displaying the or

  • Really awful 20" screen & can anyone help?

    Hi Can anyone help with ideas on how to get my 20" screen looking at least half decent because it's annoying my eyes and irritating me no end. Thanks

  • To get the amount based on the code

    hi all, i am using db10g. i have a query like below SELECT SUM(EID_AMOUNT),EID_INCR_CODE,EIH_EFF_DATE FROM EMPLOYEE_INC_HEADER,EMPLOYEE_INC_DETAILS WHERE EIH_EMP_CODE = EID_EMP_CODE AND EIH_EFF_DATE = EID_EFF_DATE AND EIH_EMP_CODE = '0026108' GROUP B