IOS 6 update = Speaker not working properly

My speaker was fine and I have no reason to believe there are any hardware issues. As soon as I updated my iOS 5.1.1 to the new iOS 6 it stopped working and now I can't listen to music or watch videos on my iPhone unless I insert a headphone!
What's happened and how can this be resolved?

Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
P.S. And yes, I've rebooted both numerous times. This has no obvious affect.

Similar Messages

After iOS 5 update, speaker not working

I updated to i05s last night and tried to make a call this morning and could not hear out of the ear speaker. The "speaker-phone" feature works, but that's the only way I can hear because I can't hear anything when I hold the phone to my ear.

Hi Guys, I FIXED IT!!!!
I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed. But I need to happily say that I now have the fix!!!! This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along. I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed. some worked for an hour but then failed. hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ... and in paticualar is has to do with your bottom connection. Your phone is thinking it is docked all the time.
To fix the no sound problem what you need is...
1. a torch
2. a tooth brush
3. methalated spirits
4. a butter knife
Step 1.
get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed! everything! it might look clean but still thats ok go to step 2.
step 2.
Turn on your music app and put the speakers on! If your phone is like mine it should not work. you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
step 3.
Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone. work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
(As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
Step 4.
Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone. Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again. slide it back and forward. Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors. if you have been using dodgy connectors or unapproved apple cables (as I was) any damage or hair and dirt on the terminal this is effecting it. Try it.   just remember if you can do something external to your phone then there lies the problem.
Hope this works for your phone as it did for mine.
Cheers

IOS 6 update speaker not working?

Coincidence? I think not. So many others having the same problem since their update. I can't afford a new phone right now and no longer under warranty. Seems scammy to me. Thanks a lot Apple. I used to be a big supporter. I am so frustrated with this and can't figure out how to go back to last update. I am angry about this

Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
P.S. And yes, I've rebooted both numerous times. This has no obvious affect.

ITunes 10.6.1 Update button for iOS update does not work (a bug)

iTunes 10.6.1 Update button on iOS device Summary / Version page does not update devices. It only checks the iTunes version!
With iTunes 10.6.1, connect an iPad, iPhone, iPod running pre-6 iOS version.
On iPad Summary / Version page, next to [Update] button the message says:
"A newer version of the iPad software is available (version 6.0). To update your iPad with the latest software, click Update."
However, clicking the [Update] button will not start update iPad. Instead it gives you a dialog saying:
"This version of iTunes (10.6.1) is the current version".
Obviously it should start updating the i-device there but instead just goes and check the iTunes version ?!?
A Bug!
What's really annoying in this bug is that it's the only way to update pre iOS 5.x devices, which is now impossible!
Apple should get this fixed asap!
Anyone found any workarounds?
[Edit]: There seems to be another discussion of this issue already:
https://discussions.apple.com/message/19671173#19671173

Just forgot to add, yes, I know there's iTunes 10.7 but it's only available on Snow Leopard and higher.
The machine in question is an old macbook, running Leopard (10.5.8), that it will propably never get upgraded.
Since most my older i-devices were initially synced with that particular machine, I'll be now stuck with iOS updates, without loosing content.

Adobe desktop app updater is not working properly

Trying to update adobe desktop app but its giving me this popup
accept button ( which is in right side) is not working. When I press cancle button (left side button) getting another popup
I have no idea what to do...!!

Well... that says that you must use an ADMINISTRATOR computer account, not a simple user account
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq may help

External Speaker not Working Properly

Ok, i have this annoying problem with the external transducer...basically sometimes it works and sometimes it doesn't.
This kinda disrupts all the allarm options as i can't rely on a device that "eventually" will work.
This is the second iPod Touch i change and the problem is the same so i guess it is not an hardware fault but most likely software.
Has anyone ever encountered a problem like this one?
Message was edited by: OneOfTwo

RRFS Northern Nevada
Re: External speaker port not working
May 11, 2012 8:25 AM (in response to Tremolo Arm)
A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
PROBLEM SOLVED!!
Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
This is a very inexpensive solution and works great for me. I'm listening to my Bose speakers now and they sound great!! Thank you to all of you for your suggestions and help troubleshooting.

IOS 7 bluetooth not working properly ipad and iPhone

Since upgrading to iOS 7 Bluetooth is not working fully on either ipad or iphone.
What will work ....
BT turns on and off OK
Personal hotspot will work ok and when in use the two devices show each other as connected via BT
Apple keyboard is recognised and connects oK
What does not work,...
If BT is turned on the devices will not find one another, even though they are both showing they are discoverable. They spend for ever trying to discover ANY device and find nothing.
Tried with a device on iOS 6xx and still no discovery
Tried with the Phototransfer app that has always worked fine via BT - it will no longer connect over BT.

no issues with my iphone4 16GB 1.5GB free
try restart and or closing the apps you don't need
http://www.apple.com/support/iphone/assistant/phone/#section_1

After new update keypad not working properly..slow have to wait for letters to fill in. Any thoughts

After downloading new OS key pad not functioning
Properly. Type in message and it takes several seconds to populate.
Anyone else having same problem or solution?

There are many other posts here on the forum about this same issue...use the SEARCH feature and I'm sure you'll locate your answer.

IOS 7 Calendar not working properly

Hi,
I can't get my iOS 7 calendar to respond to any commands... it opens, but everything is greyed out (i can navigate the app, but I can't execute anything). My iCloud is working perfectly, and it syncs with my macbook pro, but my iPhone 4 calendar will not sync or allow me to create new events. I can however sync successfully with third party apps like the sunrise calendar app for my iPhone. My contacts and safari are also syncing just fine.
Believe it or not, I do want to be able to use the default calendar app. I have tried all the usual solutions in the message boards, and nothing seems to work. Does anyone have a solution?

No one is else is havinv this problem? I'm shocked that no one has replied, not even from Apple. I am still having this problem and am missing important emails in a timely fashion. I am not getting emails that were sent 5 hours ago. THere is something wrong here. If anyone has any inkling of an idea, it would be much appreciated.
Thanks
Mark

Yosemite 10.10.2 Update - Trackpad Not Working Properly

MBP OSX Yosemite 10.10.2
The following trackpad gestures no longer working since latest update - four finger mission control, app expose, launchpad, show desktop, two finger scroll in safari (although works in chrome).
The same symptoms on BT trackpad as on the internal trackpad.
All basic troubleshooting tried - reboot, turned all the gestures off and reboot etc etc
Please help

Go step by step and test.
1. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
2. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
3. Reset PRAM:   http://support.apple.com/kb/PH14222
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk    Section: "Try Disk Utility" Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

Photoshop after Latest CC updates is not working properly.

I just installed CC Photoshop's latest update and now I'm totally out of commision. Unable to work with any of my previous 3d projects. They appear to load, but as soon as you select any object, it falls apart. Objects go flat and rearrannged. When createing new objects, such as 3D extrusion fonts, they are flat. Cannot distinquich the front from the sides. There are no shadows. When you click an object, the background dissappears. When you try to move an object, it stutters and takes several seconds before the object moves. In regular Photoshop when editing a previous projectl, for example, when setting a paint brush on a given area, an error message pops up says "Could not use the brush tool because the current time is outside the range for the target layer. "Time"??? What is going on. Does anyone know if I can uninstall and revert back to a previous project. I've got work to do. This is devesating!! The list goes on. When trying to create a depth map from a plane object, you'll get an unknown error and cannot get out of it unless you kill it from the Task Manager. Please help!

I would think you would first check to see if your video card has driver updates. Check the card maker's website to be very sure. Upgrade to the most current.
If doing that does not fix it, then try this:
Dial back your GPU settings (Preferences > Performance) from Advanced to Basic.
If no luck, downgrade PS, if only to get your work done.
You can download the Photoshop CC installer direct from ProDesign Tools.
http://prodesigntools.com/adobe-cc-direct-download-links.html
Follow the instructions carefully or the download link won't work.
Uninstall your 14.2 version and using the downloaded CC installer, you should have 14.0.0
I never did this before, but under Help > Updates make sure you don't update past 14.1.2

Edit/update function not working properly on visual basic 2012

help, i'm working on a update function on my aplication program using visual studio ultimate 2012 VB.
after i fixed the error on my coding, i debug the program with f5. but, when i tried to update the data on the datagridview it doesn't change even thought the messagebox "data has been updated" show up.
how do i fix this problem?
here is the coding for update function:
form1:
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
ClassSiswa.ubahdata(New SqlConnection, (txt_nis.Text), (txt_nisn.Text), (txt_namasiswa.Text), (cmb_kelaminsiswa.Text), (txt_kotalahir.Text), (DTP_siswa.Text), (cmb_agamasiswa.Text), (txt_beratsiswa.Text), (txt_tinggi_badan.Text))
datagridview()
End Sub
Private Sub UpdateDataSiswa()
ClassSiswa.Nis = txt_nis.Text
ClassSiswa.Nisn = txt_nisn.Text
ClassSiswa.Nama_Siswa = txt_namasiswa.Text
ClassSiswa.Tanggal_Lahir = DTP_siswa.Text
ClassSiswa.Jenis_Kelamin = cmb_kelaminsiswa.Text
ClassSiswa.Kota_Lahir = txt_kotalahir.Text
ClassSiswa.Agama = cmb_agamasiswa.Text
ClassSiswa.Tinggi_Badan = txt_tinggi_badan.Text
ClassSiswa.Berat_Badan = txt_beratsiswa.Text
ClassSiswa.Updatesiswa(ClassSiswa.opencon, (txt_nis.Text))
datagridview()
End Sub
classSiswa:
Public Shared Sub ubahdata(ByVal _cn As SqlClient.SqlConnection, ByVal _Nis As String, ByVal _Nisn As String, ByVal _nama_siswa As String, ByVal _jenis_kelamin As String, ByVal _kota_lahir As String, ByVal _tanggal_lahir As String, ByVal _agama As String, ByVal _berat_badan As String, ByVal tinggi_badan As String)
Dim sql As New SqlClient.SqlCommand
sql.Connection = _cn
sql.CommandType = CommandType.Text
sql.CommandText = "update siswa set nis='" & Nis & "',nisn='" & Nisn & "',nama_siswa='" & Nama_Siswa & "',jenis_kelamin='" & Jenis_Kelamin & "' ,kota_lahir='" & Kota_Lahir & "',tanggal_lahir='" & Tanggal_Lahir & "'agama='" & Agama & "'berat_badan='" & Berat_Badan & "',tinggi_badan='" & tinggi_badan & "'"
MessageBox.Show(" Data Telah Diupdate")
ClassSiswa.closecon()
End Sub
Public Shared Sub Updatesiswa(ByVal _Cn As SqlClient.SqlConnection, ByVal _nis As String)
Dim sql As SqlClient.SqlCommand
sql = New SqlClient.SqlCommand
sql.Connection = _Cn
sql.CommandType = CommandType.Text
sql.CommandText = "Update siswa Set nis = '" & Nis & "', nisn = '" & Nisn & "' where nis = '" & _nis & "'"
sql.ExecuteNonQuery()
End Sub

Hello,
A DataGridView knows nothing about the updates done as shown above, you need to update any rows that have changed yourself. For example. lets say I loaded data from a database table into a DataTable, create a BindingSource and assign that DataTable as the
DataSource for the BindingSource. The BindingSource becomes the DataSource of the DataGridView so now when you moved up/down rows in the DataGridView you are changing position in the BindingSource and can read this data via BindingSource.Current by casting
Current to a DataRowView then access the Row property with Field(Of T or SetField(Of T. Couple this will logic to locate rows that may not be the current row and we still can use SetField(Of T)(Col,Value) to update data in the BindingSource which is then immediately
reflected in the DataGridView.
The following is for MS-Access but the same logic applies for SQL-Server database via SqlClient data provider rather than
OleDb data provider.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

Update/restore not working properly

My wife and I have been trying to get her iPhone 4S to update to the latest version of iOS. The problem is that the software update server appears to be running at the approximate speed of a glacier -- I have been trying to download the update (a 1.66 GB download) for the last three hours, and every time I do it downloads at about 30 KB per second and tells me there is still 24 to 25 hours remaining. I have checked and rechecked, and there is NO possibility of a bottleneck on my end -- no interference from firewalls or antivirus software -- but in spite of this the download always crashes with an Error 9006, WHICH IT SHOULD NOT BE DOING.
Are the servers just completely screwed tonight? Is there a solution I haven't figured out yet? I assure you, I've tried about everything that can be tried.

I would suggest that you hook up the phone to iTunes on the computer you sync with and update that way. It is faster and requires less memory to do the update.
Cheers,
GB

RH_INSERT_INFTY in update mode not working properly

I am calling the FM RH_INSERT_INFTY using IN UPDATE TASK in my Inbound part of my IDOC.
The IDOC is getting generated successfully in the Outbound part but getting errorred out in the Inbound side.
I have checked for the attributes of the FM where the type of FM is NORMAL FUNCTION MODULE.
any pointers on this will be of immense help to me.

This is the output of journalctl --all
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

Audio in left speaker not working properly

Hi I recently have bought the HP ENVY 27 and I'm having trouble with the audio. Whether I pay music through the built in speakers or through the headphone jack in the monitor the left speaker seems to be a LOT (at least 50%) quieter than the right speaker. At first I thought the speakers weren't leveled/balanced out but I checked and they are 50/50. Any ideas on how to fix this?

Ok so I just plugged the monitor into my PC through the front headphone jack and it's working fine, it must be the jack at the back of my PC that is messed up!

IOS 6 update = Speaker not working properly

Similar Messages

Maybe you are looking for