Extract Sales order doc - performance issue

Dear all,
I need to extract SO# and SO line item. The only filtering key that i have right now is:
Sold-to party number -> from SO header
By looking at it, I CAN NOT select whole VBAK then scan VBPA order by order.
Hence I explore the possibility by taking the SO# from VBPA, where at first i get the SO# from this table by using Sold-to party number for data filtering.
But too bad that, VBPA table key fileds are :
1. SO#,
2. SO item #,
3. Partner function
For my case, i can only fullfill 3rd key field Partner function. So my VBPA selection is also taking long runtime to perform extraction.
I need your advice on how should i go about it to solve the performance problem.
Thanks in advance.

Hi
As you have only one filter KUNNR performance will be a issue..
1 Way... ==> VBAK then VBAP
2nd Way ==>
KNVV-KUNNR
get
VKORG
VTWEG
SPART ( Depends on the configuration there... if for one customer there will be same VKORG VTWEG SPART then u can write READ or Select Single)
Pass it to VBAK... and then go to VBAP...
It will not gonna improve much but may be it will improve...
or else You can go for creating secondary index... but for just satistying one requirement it's not a good idea to create secondary index...
Also discuss with Functional Consultant if they can give you some more fields in selection screen.. like S.O, Creation Date Range Sales Office Sales Org Division etc etc...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Similar Messages

How to bring in the Open Sales Orders while performing Sales Order Conv

Hi,
Could you give some suggestions on the below:
How to bring in the Open Sales Orders while performing Sales Order Conversion in R12.
Thanks
Pravin

See http://ramugvs.wordpress.com/2011/08/27/how-to-stage-and-import-an-order-using-order-import-api-apps-wms-ebiz-11i-r12/
Sandeep Gandhi

Sales order doc and item fields in customer line item report(FBL5N)

Hi All,
We have some billing documents and the accounting docs are created as well. However, in the FBL5N report, we are not able to display the sales order doc and item info even though the columns are avaliable in the layout.
Anyone can help?
Thanks,
Teo

Hiya,
You said you had the Order/Sales Doc field on the layout already.
Have you ever been able to view the Order? All I can view is the Billing Doc, and I would think that is logical, since the Order is not the immediately prceeding document for the Accounting Doc. The Accounting Doc is created off the Billing Doc and that is what is updated in BSEG. The Sales Order is not updated in BSEG (I haven't seen that happen).
In the event of a GR into stock posting, the Product Cost Collector or PO is the immediately preceeding document and hence updated in BSEG.
Cheers.

Can I use the customer requirement number as sales order in 'Goods issue MB

Can I use the customer requirement number as sales order in 'Goods issue MB1A'?
Thanks,
Tiger

Why I used the customer requirement in MB1A as the sales order, Update was terminated.
Thanks,
Tiger

Extracting sales order from R/3 to BW

hi frends,
it is very urgent where i have to extract the data from r/3 to bw and create a report. my tl has give a doc which is not of technical bw doc but it is some functional doc where sd already created a report on that. i want to do the same report in bw.
how to start with from r/3? whether already setup tables r filled for this sales order datasource i need to do it?
or else i should ask some body to fill that?
how to start with out any bw technical doc like which r the datasources i have to use and regarding business content what r the things i have to activate.
pls help me how to approach. and what r the prerequisites i have to ask them?
boss it is really urgent..
help will be highly appreciated.
thanks & regards\
rakesh

Hi venkat,
Report should have the following multiple selection parameters:
·     Company code (Mandatory Field)
·     Customer Number
·     Project Number
·     Sales Person
·     Region
·     Country
·     State
·     *Period (Mandatory Field) User is restricted to enter the period equal to or less than 12 months. If the user enters the period greater than 12 months, the system will generate an error message.
·     The report shall give following information in the output
·     Company code
·     Customer Number
·     Project Number
·     Element Number
·     Product Hierarchy
·     Sales Order Number
·     Sales Order Line Item
·     Order Type
·     Sales Person
·     Region
·     Country
·     State
·     Period
·     Month wise order values displayed for
o     Technology
o     Vertical Market
o     Driven application
o     Product
o     company1 Application
o     Equipment OEM
o     Project Type
o     Flow Parts
·     For each of these, Order values are broken into the following account assignment group
o     External
o     Within Business
o     Within Department
o     Within Division
o     Within Other company
pls help me boss how to start with

Order Management Performance Issue

In the Oracle Applications home page, when I login as OM Super User and for order to cash functionality, when I click on Order, Returns > Quick Sales Orders screen, it takes forever to load. When I reboot my client desktop PC machine, it loads quickly.
Any ideas how to solve this performance issue for Order Management Quick Sales?
We are running Oracle 12.1.1 EBS on Linux 64 bit OS platform.

Hi,
Please see if these documents are applicable.
Note: 845765.1 - R12: Performance Navigating To Line Item Tab: OE_AK_SOLD_TO_ORGS_V [ID 845765.1]
Note: 399998.1 - OEXOEORD: Performance Entering Item On A Sales Order Line
Regards,
Hussein

Sales Order stock upload issue

Hello all,
during cutvoer we have uploaded sales order stock with 561E and then performed a revaluation with MR21 in order for the stock to have value. In 80% of the items that worked fine except some cases that when MR21 is performed the value doesnt change. When attempt to perform MR21 the current proposed value is correct but the total stock value is shown as zero.
Any ideas why this occured and any way to resolve the issue.
Any help is greatly appreciated

HI
Do you have sales order stock for the 20 percent items that failed....MR21 changes the price of a material and Sales order stock is generally updated with the values influenced by the sales order prices
Regards
Virender Singh

Sales orders with credit issues taking availability stock

Hi,
I am doing confirmation using Global ATP in APO. The confirmation is well done, but the confirmed quantity for sales orders with clients that have credit issues is taken the available sotck for other sales orders with ok clients that I want to confirm the quantity they ordered.
For example:
Stock: 10 PC
Client A order 15 PC and 10 are confirmed, but the ordered is retained becuse of credit issues with client A.
Then client B order 3 PC, but nothing is confirmed because the ordered for client A is reserving the stock (note: this would be ok if client A had not credit issues).
So, I want that the 3 PC for client B are confirmed and the 10 PC not reserved for the cient A while client A has credit issues.
How could I configured, so that the orders with credit issues do not reserve stock for the incoming orders?
Thanks a lot.

Hi DB49,
thanks for the quick answer.
I checked the configuration in the R3 and seems to be fine. To prove it, I disconnect APO and did the availability check in the R3 system and it is working fine; the orders quantities that are blocked because of credit issues, do not reserve stock for incoming orders.........son new incoming orders are well confirmed.
But after connecting APO the problem continues. I checked the next points.
In R3 transaction CO09: takes to the APO screen and you see the ATP available quantity OK (do not consider the quantities of the credit issues orders). But at the moment that you make the order (VA01) it does not confirm any stock and if you select the line and go to the ATP screen (the same you get from the CO09) the quantities of credit issues orders are taken into account..the ATP availability quantity changes from the first going directly from the CO09.
What could it be?
Note: it was working fine with APO, I started to have the issue after implementing note 1262475 in APO. This note was becuase the BAPI_APOATP_CHECK was not brigning any value for the ATPQTY_***.
Thanks a lot!!!

Referring Sales order no while issue stock to subcontractor

Hi All,
My client want to refer sales order while issuing stock to sub contractor.
Scenario is like this, he procure all the materials based on the Sales order only.
Now in sub contracting po he want to use Account assignment category C and item category L. And once the po is completed he want to provide stock to subcontractor using this sales order only.
Please go thru the issue once and let me know the possiblities.
Revert back in case not understand the issue.
Reg,
Ashok

hi
u can do this scenario
u have to maintain combination of C& L
then go to omjjj and in 541 movement in field selection (201),
in additional acct assignment make sales order field mandatory ,so system will ask u for sales order in MB1A
also in field selection enjoy add field KDAUF which is for sales order ,so system will ask u for sales order in MIGO
steps
create po with C&L
issue goods to sc (system will ask u for sales order ref
and further normal subcon cycle
just try it , i haven`t try it
reward if helpful
regrds
kunal

MIE1 :: Sale order cycle count issue

Dear All,
II am using transaction MIE1 to create inventory documents for sales order stock. I am receiving many more items to count than expected. I checked the cycle count indicator and materials coded to be counted only once a year and last counted in February and March in table MSKA, but still when i executer IME1 system is picking it for cycle count.
We are on SAP 4.67. Our fiscal year ended at the end of September.
Anyone know why these materials would show as due to count now?
Thanks,
Chaithru

Hi Terry,
To be honest there is not normally any standard manipulation of the bin sequence in Physical Inventory, but here are a few places to look here (Grab a coffee first)
Logistics > Warehouse Management > Strategies > Define Sort Sequence for Putaway >
Logistics > Warehouse Management > Strategies > Define Sort Sequence for Removal >
These two items determine the sort order priorty of your bin numbers, eg. if your bin numbers are 10 digits long, you could sort the bins in order using key co-ordinates with differing priority. So the second character of your bin could be sorted prior to the first character. (The logic here will be based upon the individual warehouse layout/rules)
Next have a look in
Logistics > Warehouse Management > Activities > Transfers > Processing Performance > Profiles (Have a look at Sort profile)
Logistics > Warehouse Management > Activities > Transfers > Processing Performance > Control for Performance Data Processing / Define TO Split
In these two you can manipulate the sort order of the bin numbers in TO and other documents, can look complex but is simple when you have understood the logic
Good luck
Steve

Pricing problem while creating sales order doc

Hi friends,
My requirement is to create sales order with ref to contract i am using 'BAPI_SALESORDER_CREATEFROMDAT2' , and I am extracting data from konv table to get price through condition record , but i am getting 4 messages
(S) SALES_HEADER_IN has been processed successfully
(E) Condition PR00 is not allowed as header condition
(W) The sales document is not yet complete: Edit data
(E) Sales document was not changed
and i am not getting pricing for created sales order document.
please help.
regards,
Sravani.

solved

Sales order CIF performance

Hello SCM experts,
We are trying to CIF initial load of sales orders for 2 materials; Each material has Variant configuration. There are 25 APO relevant VC characteristics for each material.
Therefore, total volume of VC materials = 2
Each material has 30,000 sales orders per month.
We are trying to integrate sales orders to SCM 7.0 version; Total volume of sales orders is 100,000 for the Initial load.
Currently, the performance of this integration is worse and takes around 20 hours.
I want to know of any other clients that have good sales order volumes.
Has anyone seen a sales order volume of 100,000 with Variant configuration? What is the best performance that should be expected for this volume?
Appreciate any inputs.

Hi Louis,
Have you considered uses of parallel processing while activating initial load integration model?
I think by processing SOs in parallel processes, it will definitely improve performance.
Please let us know your latest situation.
Regards,
Abhay Kapase

Sales order doc types to Roles - IMP question

Dear Gurus :
We have a requirement .We are revising users who has authority to do certain SD transactions like superviosr has access to all t codes related to sd. billing co ordinatior will have access to all billing docs and t codes.
Requirement is :
I have ot assing Sales order document types to roles. Any idea how to do it ?
Full reward points will be given.
Vanbills

Dear van bills
Through two options, you can achieve this
- Basis team people can control authorization for specific user ids
- Apply transaction / screen variant via shd0 so that you can decide which user can enter / alter datas.
thanks
G. Lakshmipathi

Sales Order Qty Confirmation Issue

Hi
I have created the order form my material with quantity of 10 units. The total unrestricted stock available for the material is only 5 units.
When I look at the schedule lines, the total order qty is confirmed even though the short of 5 unit of stock.
I was confused here. By right, the order should only confirm the 5 unit with respect the stock availability. But I dont understand why system has
Confirmed the 10 units completely.
If my understanding is correct, the sales order has to confirm the sales order based on the stock. In later stage, once the stock is up, we need create the
Schedule line for the remaining qty by re-do the availability check function.
Could you please someone correct me on this order confirmation logic !!
Regards
Priyan

Hi SS
Order is a normal (Type: OR) Trade order. And there is no consignment stock maintained for this material.
In MMBE, I can see only unrestricted stock exist for this material.
Please confirm whether my material setup is correct.
It is usual vanilla setup.
My doubt is that how come the order item has been confirmed with excess qty and system allows us to create the delivery as well.
Firstly, on what basis the order full qty has confirmed.
Please advice.
Regards
Priyan

Sales Order - Source List Issue ( Help needed)

Hi All...
The user is trying to create a Sales order , but could not do it for a particular Customer and we are getting a error * Source not included in list despite Source List Requirement" and then we are getting an error Incorrect Index Structure for Table XMVERF_PO/.
I tried Checking Source List everything is fine , I dont know what to do ??? Any suggestions from
SD & MM side( I think config shd be fine , Any Master Data Checks ) needs to be taken care.??
The Material is a MTO and once we save it in the Sales Order it creates an PReq automatically.
Please let me know ASAP...
Thanks
Balaji

Hi Charlie...
Thanks for the reply, As u told i didnt check the me05 , do u think Me05 really plays a role ,
because i try testing in QA without Me05 it worked. But in PRD it didnt.
I didnt try now because all the users had left since i dont have that kind of access in PRD..
ANy other suggestion are welcome.....
Thanking u for the support....
Balaji

Extract Sales order doc - performance issue

Similar Messages

Maybe you are looking for