Extreme flash problem

Hello,
For almost a week now I have had problems with using flash in my browsers (IE, Mozilla and Chrome which is my default browser). It's like the browsers doesn't feel that it's installed, also Chrome has the same problem even though it's built in there. The problem I have is that for example on Youtube it says that the plug in can't be loaded, and this occur in advertising and on other sites with different flash player. The problem also occur on Adobes site with the same problem tha the plug in can't be loaded.
I have tried to reinstall the browsers and Flash several times with no success. Later on I even tried to remove the antivirus and change to something else to fix it but no luck there either. I have no further ideas what I can do it and really need your help as it seems as my last option is to reinstall my OS.
My OS is Vista Ultimate and flash version is the newest (11.6.602.168).
Thanks for your help!
Regards
Erik

In many instances, you have to fully uninstall the security software to get around the problem.  I've seen some aftermarket firewall software cause similar problems as well.  Disabling the software usually doesn't do it.
You have three completely separate installations of Flash Player on your machine all misbehaving. 
Make sure that Flash Player is enabled under chrome://plugins and about:plugins in Firefox. 
If it still doesn't launch, maybe your preferences are corrupted.  Go to Control Panel > Flash Player > Advanced > Browsing Data and Settings > Delete All. 
Restart your browser(s) and see if that resolves the problem.
If that doesn't do it, I'd go the nuclear route:
Download the Flash Player Uninstaller
Reboot
Run the uninstaller
Reboot again
Go to http://get.adobe.com/flashplayer and download the installer.
Exit any open browsers and run the installer.

Similar Messages

  • Flash problem persists after 6 months...does this new information help?

    Hi All!
    I posted my problem almost 6 months ago, (I'll paste some of the info below to bring you up to date), but I STILL can't access only FOUR sites because I get a "Plugin file is missing" error, (after my previous post I found 2 other sites).  I've been trying to solve this problem off & on, but I got more dedicated the other day because I'll be needing access to these sites very soon.  I found some new information today that I hope will solve this awful problem; however, since I'm not very technically inclined I know I have to ask a "Flash Expert", so here goes....
    I run Windows 8 & I use Mozilla exclusively.  I updated Flash the other day to version 15.0.0.152 & I wanted to make sure the plugins had been updated, so I opened the "Flash Player Settings Manager" & under the "Advanced" tab it lists:
                                            NPAPI Plugin Version 15.0.0.152
                                            PPAPI Plugin Version Not installed
    Is it significant that the PPAPI Plugin is "Not installed", or does Mozilla only require the NPAPI plugin? 
    My second question regards the installation of Flash.  I know that when a program is problematic, it sometimes helps to uninstall & reinstall it...I recently had a game that went nuts & that's the procedure I had to do.  Also, someone on Mozilla's forum said they were having a Flash issue & they went to your site & downloaded the .exe AND the .msi Installers from the Distribution Page, then manually installed them & their problem was resolved.  Would this help me resolve MY Flash problem?  If you think it's worth a try, do I have to uninstall Flash first?
    Well, that's all the new info I have.  I have to figure this out before December because that's when the nest-cam comes back on...I really have to get this problem fixed!  I'll paste my previous post below, but I hope the uninstall/reinstall method will be the answer!
    Thanks in advance for your help!
    Best Regards,
    DogPal
    Here's my previous post:
    Flash 13.0.0.214 does NOT work on some sites, but works fine on all others in Using Flash Player
    Hi!
    I watch several wildlife nest-cams every day running Windows 8 using Firefox 29.0.1, but yesterday morning, (after I'd already watched the 6 cams I view every day), I started getting a solid, black screen with, "Error loading plugin: Plugin file not found", on TWO of these sites.
    My attempts to resolve the problem were:
    1.  Checked all the other web-cam sites I view daily, and there's only a problem on 2 of them.
    2.  Went to You Tube, Facebook & other similar sites and I can view streaming media.
    3.  Refreshed pages-when that didn't help, I closed & reopened Firefox & still 2 sites with "plugin loading error"
    4.  Completely shut-down my laptop & rebooted.
    5.  Did "System Restore" to earlier in the day when ALL web-cam sites were working.
    6.  Went to Adobe Flash site & verified that I had the most current version...I do, & I saw the animations on Flash site.
    7.  Verified my Flash Plugins in Firefox...AGAIN...they're all activated & up-to-date
    8.  Checked & re-checked ALL the web-cam sites I view every day, (for, at least the 10th time), and the
         same 2 sites are still showing the "Error loading plugin: Plugin file not found" on a black screen.  Even
         though the video isn't seen the "chat" area is functioning, (I don't know if that's important, but I
         thought I should mention it).
    9.  I posted the issue on Firefox's Forum but no one has an answer since Flash works everywhere except
         for 2 sites.
    I've tried everything I can think of to troubleshoot this, but as you can see, I've had no success in solving this "mystery".
    As for the 2 sites I can't view, they are: 
                                        http://www.pixcontroller.com/eagles/    And
                                        http://www.westmorelandconservancy.org/BlueBirdWebcam-1.htm
    I've been watching these sites for MONTHS, so why I can't view them all of a sudden, well, I'm clueless, (I guess you already figured that out...ha ha ha).  I was watching the 2 sites listed above early yesterday morning, then when I looked at one of the other cams I view and came back to these 2 sites, I got the "error message".
    I hope you have a solution for me, as I'm desperate!  I'm WAY behind in my documentation for these 2 sites, so hopefully you'll have an easy answer.  If it's a technical thing, please use LOTS of details, as I'm not very technically inclined.
    Thanks in advance for your help!
    Best Regards,
    DogPal 
    P.S.  I just checked on another site that offers many different wildlife cams, & I CAN view the "Pittsburgh Bald Eagles" if I go through: http://www.ustream.tv/channel/pittsburgh-bald-eagles    I'm sure this means something, but since I don't understand this technical stuff I don't know what that is!  (I told you I'm clueless!) 

    I definitely see a problem with the pixcontroller/eagles site on Windows 8.1.  It works fine for me in the same version of Firefox on Windows 7.  It's unclear to me whether it's a Firefox or a Flash Player issue, but I'm happy to look into it further and get some bugs filed.
    As a temporary workaround, both sites work fine with Google Chrome and Internet Explorer.

  • Flash problem after software update (on 10.6.8)

    I'm having flash problems on *some* macs after one of the recent software updates (june 2012). 
    On my school's 10 iMac's (2010), I can't play flash games anymore *in safari*.  Chrome is ok.
    An example site, is http://www.barryfunenglish.com/games.php (select any game)
    But on my school's 6 MacBook Pro's, I can - both safari and chrome.
    It was working 2 weeks ago on all computers.
    I'm using Software Update server from our server to update all the macs, so it's possible there was an update problem.
    Why is flash missing on the 10 imacs safari?  But not on the macbook pros?

    AppleJason wrote:
    so did Apple uninstall flash on safari with it's latest update?  do you know the reason?
    Yes, it was blacklisted by Adobe for security vulnerabilities. OS X now checks to make certain you are running a safe version and disables it if you aren't.
    With the latest update, you now have the option of having Adobe doing a "Silent Update" in the background without your having to do anything. I would recommend you implement it.

  • Firefox not helping with Flash problem

    Ok, so, I'm getting really irritated with Flash. I talked to
    a friend who was having flash problems and they said they
    downloaded Firefox and it fixed the problem. Well, after doing
    EVERYTHING else first, I thought, what the heck, maybe it might
    actually work. So I downloaded and installed Firefox. Ok, that
    installed perfectly fine. So I used Firefox to download Flash 9. I
    thought all was going to work out, because Firefox didn't just
    refresh the page like Internet Explorer did whenever I clicked the
    "Agree and download now" button on the download page. It actually
    downloaded and "said" it installed correctly. But I still can't
    play ANYTHING no Youtube STILL!! I go to youtube on Firefox and
    aperently it doesn't regonize any Flash on my computer. I go to
    youtube on Internet Ex. and it says I need the latest version of
    Flash. I tried rebooting the computer. I tried uninstalling and
    installing it AGAIN. What the F is the problem? I've made sure all
    my AxtiveX controlls are set to whatever thry need to be, my
    Shockwave is updated, my security is not interfearing. I'm getting
    really pissed. I've been trying to fix this problem for months
    now!! What else could be going wrong?? Is there something I haven't
    tried yet? Do I just need to get a new F-ing computer? Someone
    help!!

    Well the first thing you need to understand is this...
    Flash Player for Windows Internet Explorer is an ActiveX
    control.
    Flash Player for Windows for ALL other browsers is a plugin.
    They do the same thing ultimately, but they're separate
    downloads and on your machine they're actually seperate bits of
    software.
    So the reason that so many people have success with Firefox
    is that the Flash Player plugin seldom has install failures. But
    for IE Windows users the Flash Player activex control often has
    permission-related install failures that cause these kind of
    issues. It's unfortunate, but very, very complex and we've been
    fighting it for a long time.
    So the thing to remember is that when you're talking about
    Firefox, you're not dealing with ActiveX controls in ANY way.
    So here's the question.. When you launch JUST Firefox, and go
    to this page, what do you see?
    http://www.adobe.com/shockwave/welcome/
    Regards,
    Bentley Wolfe
    Senior Support Engineer, Flash/Flash Player/Digital Editions
    Adobe

  • Flash problem in IE - not the usual one.

    I am new to the game here. I've created some pages that use a
    Flash video player. The user can click on a list of available
    videos (XML generated), and the video will load in the player and
    play.
    Works fine in IE and Safari on Mac.
    Works terrible in Firefox on Mac and Windows (seems to need
    to buffer for a long time before play starts - longer than the
    specified buffer time).
    In IE for Windows - videos play fine and load fast. but -
    activating a video seems to "lock out" the rest of the page -
    rendering the ability to click through to other links not possible.
    Eventually, if i smash around enough, i can get a link to work -
    but its a terrible experience. This doesn't seem to be the "usual"
    Flash problem in IE (ie click to activate) - but I'm new - so this
    may be a related issue?
    Help??? I don't even know where to begin.
    address:
    http://64.38.28.254
    thank you in advance.

    Try changing the line:
    td { }
    in your CSS file 'basic.css' to:
    td { vertical-align: top; }
    This will align all table cells on your web site to the top.

  • Explorer 7 + vista ultimate+ flash problem

    Hello,
    I have just intalled vista ultimate and I have a serious
    problem with explorer 7 and pages with flash contains. Each time i
    go through a flash contain with my mouse pointer the flash contains
    starts to " flash" like crazy!!!
    Do you why? is a a display problem, flash problem (version
    9.028)??
    Thanks in advance!!
    Tatankha

    Hi Mush25-
    I had to step back from this and take a different approach.
    While tossin' down some aspirins, I worked on my other niece's
    laptop to upgrade to FP10 and troubleshoot. Identical to T2, but
    with more Yahoo stuff: homepage, toolbar, chat, etc.. Turns out she
    had already done it via Adobe yes/no prompt. No issues, everything
    works OK. She said it only took a few minutes. I checked it out and
    checked the settings, it's OK. Go figure.....
    So, I will approach this as a problem with Manual
    Downloading, which you and I did (not sure about Morac).
    The HP desktop? We don't normally use IE7 on it, as it is AOL
    Dial-up only, so few/no cookie issues on IE7. I kicked in IE7 and
    FP10 worked OK. Well, as OK as dial-up video can be....
    OK- a question for ya, this will tell me if I'm on the right
    track: On your first FP10 upgrade, did you FIRST uninstall FP9, or
    download/install OVER FP9? Please answer honestly....no judgements
    here...
    I didn't uninstall first- I admit it! I never do for Adobe
    and Java, as I want to make sure the new version/upgrade works OK
    before losing the old. I was on the old dial-up for too long, I
    guess. There are exceptions, of course, like AVG.
    Let me know.

  • Do I need to drop Mozilla since they can't seem to solve the Adobe Flash problem?

    I have followed every step suggested to fix Adobe Flash crashing problem. Is the real solution to just drop Mozilla and switch to Chrome? Seem Adobe Flash works just fine there...

    By the way, it would be useful if you could mention which settings you have changed. The headline suggestions for working around Flash problems usually include the following:
    (1) Disable protected mode (Win Vista and Win 7 only)
    See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
    (2) Disable hardware graphics acceleration in Firefox and in Flash
    (A) In Firefox, un-check the box here and restart:
    orange Firefox button ''or'' classic Tools menu > Options > Advanced > General > "Use hardware acceleration when available"
    (B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
    (3) Check for and resolve conflicts with Firefox add-ons (e.g., using Safe Mode or a clean profile)
    (4) For display issues with scrolling, disable Smooth Scrolling and Autoscrolling here:
    orange Firefox button ''or'' classic Tools menu > Options > Advanced > General

  • Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.

    Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.Extreme and Irritating hang problem occurs after I have updated T2 Ultra Dual Phone with Lollipop Version.Kindly assist and also if Boot the device will it be solved via flashboot and unlock the bootloader?? Waiting for revert.Kindly revert.

    Flashmode or Fastboot mode is only for those that wish to root and install a custom Rom or firmware, if that's what you want to do then head over to XDA - Howwever have you tried a system repair as this usualy fixes issues after an upgrade.
    Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • SAFARI 4 HANGS/FREEZES/CRASHES ... FLASH PROBLEM

    Okay, this is my first Post to an Apple Discussion Forum of any sort.
    I've been using Mac OS X (Tiger) for a few years now, and had switched to Safari from Mozilla Firefox. No probs w/ Safari as of 3.2.3 I think it was, but now that I've upgraded to Safari 4, I've got a problem where it seems to lock up. A page will seem to have a status of "Loading ..." indefinitely, and hitting the "X" next to the word "Loading" to stop the loading, or clicking on a Bookmark Menu button, or anything of that sort doesn't work. The page just doesn't load, or will eventually start to load some stuff super slowly. You can go in to Safari's menu options though.
    I've seemed to isolate it to a Flash problem.
    I've uninstalled Flash (the latest version from Adobe), re-installed, repaired Permissions, and many other things that I've read in similar Posts, to no resolution.
    Sites will actually load fast, and Safari seems to work if Flash plug-ins are moved from the Library>Internet Plug-ins folder (to the Disabled Plug-ins folder for example)... until you are on a site that uses Flash, where you'll get an error about not having plug-in for that application/MIME type (ie www.hulu.com).
    At this point I'd be happy to uninstall Safari 4, and re-install Safari 3. I've downloaded both .DMG's, because another Post suggested the Safari 4 .DMG would also include the Uninstaller. I only have the Install package though.
    I guess I'm asking for either an answer to ...
    A) Where can I find the Safari 4 Uninstaller (yet maybe not lose bookmarks) so I can re-install Safari 3? ... or
    B) Does anybody know of an effective way to resolve the Flash issue?
    Thanks in advance for replies/suggestions!

    Your experience sounds much like mine. There is a thread under my post named "Safari and Flash Player." Unfortunately, I have gotten no other suggestions in my thread, likewise doing everything you did to no avail. Unlike radbrad, I am having no apparent issues with JavaScript. Like IdidLikeSafari, I have been able to isolate the conflict to Flash: disabling that plugin alone prevents the hang-up. The curious thing for me is how site specific it is: I can run Flash content on lots of sites, and everything shows successful on Adobe's player test without any loading issues. I have reported to Apple. Adobe's bug report appears to work differently from Apple's, requiring an Adobe account I have not created. Perhaps this issue should be reported to Adobe as well, but for me there were absolutely no issues until Safari 4. Just like IdidLikeSafari, I had no issues at all under 3.2.3. So it appears the fault must be caused by Safari 4 somehow.
    I don't know if you saw the thread about the hard-disk renaming workaround. I tried it, and it did not work for me. But since it is so simple and harmless, you might as well see if it works if you haven't tried it yet. I'm sorry that I can't remember the name of that thread, though.

  • Y40-80 Volume/Sound and Screen Flashing Problem

    Hey guys, I'm having an issue with my new Y40-80. The volume will sometimes noticeably decrease and then randomly go back to normal. I have installed the relevant audio driver from Lenovo as well as completely updated my laptop through Windows Update. I have also done a complete system restore, but to no avail. I also get a hissing noise when using my earphones, which is normal, I got it on my last laptop as well, but the thing is, the hiss also comes and goes. If there are no souds playing, then the hiss is gone, but right before I click something that is going to play a sound, like a song, for example, the hiss comes back, but if I pause the song, the hiss remains for a few seconds before going away and being completely silent again. Perhaps I received a bad audio card? I also have an issue where my screen will sometimes quickly flash pure white or some distorted image of whats being displayed. I have only had this issue while playing this online game called League of Legends. I have also installed both the relavant AMD and Intel VGA drivers from Lenovo and my laptop is completely up to date. Any help is apprecitated. I really like the laptop, but these issues are annoying and are making me wonder if I have received a defective unit. Thanks!

    Well, I seem to have found a solution myself. Posting it here in case someone comes across the same issue. Instead of downloading the Realtek audio driver from Lenovo's website, I downloaded the appopriate one from Realtek's website. Here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false I believe the audio driver that comes preinstalled is the same as the one on Lenovo's website and I don't think it's for a Windows 8.1 but is instead an old driver for 64 bit Vista.  Also, for the screen flashing problem that I was encountering while playing League of Legends, I believe I've also found a solution. Instead of downloading the AMD driver from Lenovo's website, I also recommend going straight to AMD's website and downloading the appropriate driver there. I tried using their auto-detect utility but the issue persisted. I went to AMD's website again and this time manually searched for a driver and came across a beta driver and so far so good.  

  • Verizon DSL and Airport Extreme Setup Problem

    I have Verizon DSL (not FIOS). I am using a Westell modem, model number B90-210015-04.
    I try to go through the setup but the Airport Extreme Utility says it cannot find a valid IP address (the light keeps flashing).
    I have it setup in bridge mode since I think my modem is also a router. However, there are a lot of other inputs in the setup and I don't know if I need to put in anything for those (e.g. DNS Servers, Domain Name, etc.). I called Verizon and they said there shouldn't be any special inputs. They implied it should just work out of the box.
    The modem is working with my existing Netgear router (model number WGR614 v4).
    Any help?

    Had the same problem. Had the same setup as yours.
    If you use WPA/WPA2 and if your password is too short (less than or equal to 8 characters), the AirPort Extreme Utility will misleadingly tell you it cannot find a valid IP address. As it turns out, WPA/WPA2 requires a longer password (see http://en.wikipedia.org/wiki/Wpa2). I don't understand why a weak password would result in a confusing error message like this, but after I used a stronger and longer password, the dreadful amber light finally turned green!
    PS: I didn't enter any DNS/DHCP info nor my DSL account/password info throughout the entire setup process. I figured that if I didn't need these pieces of information with the old router before then I shouldn't need them with this new hardware.

  • Firefox is constantly freezing and not loading, possible flash problem?

    My firefox constantly gives me a page error in which I am unable to browse any website afterwards unless I Force Quit out of it and relaunch it. I didn't have this problem before 4.0.1. My internet is perfectly fine, I often switch to Safari and browse with no problem temporarily when this happens. Is there a fix to this? This is extremely annoying and I'm about to make my move over to Google Chrome. Thanks.
    All add-ons, flash players, drives and everything you can think of is up to date.

    Still can't find anything. Extremely frustrated especially because I have multiple tabs open with things I need to study for finals. I will def be making the switch over to Google Chrome after this week when I have the time. I've had it with Firefox.

  • Airport Extreme Flashing Amber - but internet connection is OK

    I have the current generation of Airport Extreme, which has been working just fine, until tonight. It started flashing amber. My internet connection is OK, and in fact my desktop is connected to the internet thru the Airport Extreme via ethernet cable, so that pathway works (which rules out faulty cable between Airport and modem). But the amber light keeps flashing, and none of my devices that connect via WiFi can connect to the internet (to be clear, they can see my base station, but they cannot connect to the internet. The only device that can connect is my desktop, which again is connected to the base station via ethernet cable). I've done multiple power-cycles, and a hard re-set of the base station, same result. In Airport Utility, the error is "Your Apple Wi-Fi base station does not have a valid IP address", but assuming that this is the correct error (which I am doubting, since I am connected to the internet), there is no way for me to address it. 
    I have two Airport Express's on this network - needless to say, they are also showing up as problems in Airport Utility since their base station is amber.
    BTW - I am running OSX 10.6.8 - OK, I'm a dinosaur. But just in case that was the problem, I tried to address this with the current Airport Utility from my iOS 7 iPad, but still no luck.
    Any advice?

    Thanks, landrefl. Airport Utility IS telling me that there is an error, and the error is ""Your Apple Wi-Fi base station does not have a valid IP address". But that's my problem - I'm writing this now because I am connected to the internet, through the wired connection thru my Airport Extreme. So, although it is telling me what it thinks is the problem (""Your Apple Wi-Fi base station does not have a valid IP address"), that a) seems to be incorrect, and b) I don't know how I can change or correct it anyway.

  • Airport Extreme Printing Problem with HP Deskjet.

    Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4   Mac OS X (10.4.4)  

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • Black Magic HD Extreme capture problem

    I recently switched from a PowerPC quad to a Macpro.
    Blackmagic card worked 100% in the Quad.
    So I installed the Blackmagic HD Extreme into the Macpro.
    Now I have constant problems when I go to log and Capture. The card does not recognize the input source. I have to close out of FCS, reboot, re launch, re- launch L&C, etc..over and over and again until it eventually sees the source.
    I updated the drivers- check prefs, ran disk utility, etc
    Blackmagic support is stumped.
    (In fact- I tried to launch L&C for 30minutes- called BM support while I continued to try and get it to work. As soon as I got the guy on the phone- I was able to get it to launch!
    Like I said- I do nothing major to change any settings- sometimes it sees the source and sometimes it doesn't.
    (My Source and Easy set-up is always the same.)
    Please- what the heck is going on here. It's making me crazy.
    Would AJA work better the Macpro?

    Pose your question here:
    http://forums.creativecow.net/forum/blackmagicdesigndecklink
    A forum dedicated to Decklink cards.
    Shane

Maybe you are looking for

  • Migration from OAS 10g to Weblogic 10.3

    Hello, I migrate large app from OAS 10g to Weblogic 10.3. 1. The main part of the job was to prepare descriptors for Weblogic. Unfortunatelly I don't find any tool that could do the job:( There are some problems with descriptors namespaces. This sche

  • How to create Live Soccer/Basketball score templates in Premiere Pro CS 5.5 ?

    I have a video about a sport competition. You know, we all see these templates in TV/NET as a info table. It upgrades as score changes. I know it is easy to create it in After Effects. But I want to do it in Premiere Pro CS 5.5. I heard that we can c

  • Sort Order change as you wish

    Dear, If you could provide a query in which sort order is change i.e (name begin with a letter C first then D then B then A and then E, F, G, .... Z?

  • [svn] 4690: * Fixed an issue caused by revision 4330.

    Revision: 4690 Author: [email protected] Date: 2009-01-27 13:12:47 -0800 (Tue, 27 Jan 2009) Log Message: * Fixed an issue caused by revision 4330. Due to leaving the backing variables and functions in the public namespace, they were showing up in Fle

  • Blank pages on the Adminui

    I have installed server Jboss.  I am able to log in. I can see the Home, Services, Settings options.  But when I click on user management, the pages are blank! Suggestions? Thank you in advance p.s. it is an Eval copy of ES4 Server