Extreme running in bridge mode, can't get out past router or firewall

Hello
I have my Laptop, Mini and an older PC connected to my wireless network via my new airport extreme. I had teh system connected and got the solid green light but no internet. After putting the extreme into bridge mode everything works fine. The problem I have now is that I can't activate my web cam it says that i am blocked behind a firewall or router. I have been told that to get out from behind the router of firewall I need to be out of the bridge mode, but when I try this I loose my internet connection??? Anybody have a suggestion???

Warnercj7, Welcome to the discussion area!
I guess the AirPort Extreme base station (AEBS) is connected to a modem of some type. It appears that the modem is operating as a router.
You will need to configure the modem/router so that the appropriate ports are forwarded through the modem/router to the web cam.

Similar Messages

  • TS1372 my ipod classic is in disk mode, can,t get out of it, it says error 1439, what can i do, i tried everything, they said in the apple page, please help me.

    dear, Friends,
                         I have ipod classic, My ipod is in the disk mode, can't get out of it, it says error 1439, i had tried too many times, with trying to reset the ipod or restore it, but failed, please help me in this what can i do.

    Try going to settings and reset all settings. This worked for me.

  • Using Extreme in Bridge mode, can't see the DHCP clients if the D-Link router

    I have an Airport Extreme attached to my DLink modem/router.  I have configured the Airport Extreme in Bridge mode, and I was expecting all clients to show up in my D-Link router.  Although the configuration works most of the time, I have been experience a few issues:
    1.  From time to time, computers attached (both Windows and/or Mac) complain about an IP address conflict.  I can ignore the error and it works fine.
    2. From time to time, I loose Internet connectivity, and I need to disconnect my computer and reconnect again to solve the issue.  This is not necessarily linked to symptom #1
    3. On my D-Link router/modem (which I only use to connect my Airport to my ISP), if I check the DHCP clients, I can see the Airport router connected and *some* of the wireless clients that connect through the Airport.  The list changes quite randomly, and at times, I see the airport appearing twice with different IP addresses.
    Any help configuring it "right" will be appreciated!
    Alain

    When the AirPort Extreme is in bridge mode, the AirPort Extreme is simply passing through the DHCP settings and services that are handled by the D-Link modem/router.
    In other words, the D-Link device is in total charge of the DHCP services for devices on the network.
    You might want to check with D-Link support to see if they have any recommended practices for configuing the modem/router when another router....the AirPort Extreme in this case....is being used in bridge mode on the network

  • EA3500 in bridge/repeater mode - can't get it working!

    Hi all,
    I have a EA3500 as my primary wireless router. I have cable service and my EA3500's WAN port is connected to my cable modem. I have a few devices (NAS, etc) connected to LAN ports via Ethernet and other devices that connect wirelessly. With the single router, everything works fine.
    My issues are when trying to add a second EA3500 to extend the range of my network. I've tried following Linksys' instructions on bridge mode as well as cascading (LAN to LAN).
    No matter what I try, I can't get the second router to work properly. My main router is set to a LAN address of 192.168.11.1 and I am setting the second to 192.168.11.2. I am also setting the SSID and security settings the same on both routers. However, once the second router reboots I have devices connecting to it which are then unable to reach the Internet.
    My end goal is to have the second router in a media room where my PlayStation, TV, and audio components will be able to connect to it and access both my NAS on the LAN and the Internet. Can anyone provide instructions on exactly how to set these things up? I'm about to throw both of these in the trash and start over with a different brand. 
    Thanks in advance!
    Jim

    Hello lootcorp,
    Try checking the connections between the modem, 1st EA3500, and the 2nd EA3500. See which ethernet cables are connected from one port to another (from the modem to the 1st and 2nd router. Try changing ethernet cables if possible. To cascade the routers using LAN to LAN method, here's a link:
    Cascading or Connecting a Linksys router to another router
    Do not forget to reset the routers before you cascade them. I would opt for the LAN to WAN method of cascading. That way, you have 2 sets of wireless networks with different SSIDs and passwords.
    Bonne Chance and keep us in the loop.

  • I created an imovie that runs 2hrs 14min but can't get it to burn on a DVD

    I creatded an imovie that runs 2hrs 14min but can't get it to burn onto a DVD. 
    Any recommendations?

    Hi
    iDVD - don't care about GBs - ONLY - Time = Movie + Menus - as follows
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    If You NEED to put in more than 120 minutes onto a SL DVD - Then I would use Roxio Toast™ as this can squees in between 7 to 10 hours onto this - BUT AT A BARELY USABLY QUALITY.
    VHS tapes recorded in EP- mode will look brilliant in comparision
    Just as info:
    SP = 240 minutes on a standard VHS tape
    LP = 480 minutes
    EP = 720 or more ?
    Yours Bengt W

  • I was running remote desktop on my old mac pro running 10.4.11.  Upgraded to new pro running 10.6.7 Can I get remote desktop to run on new computer?

    I was running remote desktop on my old mac pro running 10.4.11  Just upgraded to new pro running 10.6.7  Can I get my previous remote desktop to
    run on new computer?
    Thanks

    Are you talking Apple's Remote Desktop software, or Microsoft's?

  • My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

    My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

    I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • I have Mac OSX, version 10.4.11; I loaded Firefox 4, lost 3.6.16, and now I found out I can't run Firefox 4. Can I get 3.6.16 back?

    I have Mac OSX, version 10.4.11; I loaded Firefox 4, lost 3.6.16, and now I found out I can't run Firefox 4. Can I get 3.6.16 back? I am not sure what to do. I dragged my old firefox icon to the desktop and it disappeared. The new icon has a white circle with a slash, and won't open because I have an older version Mac

    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • My ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

    my ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

    Google "DFU mode", put it in that mode and Restore it in iTunes.
    And stay away from jailbreaking.

  • How can I get out of recovery mode?

    How can I get out of recovery mode without restoring my iPod?

    Try using Yamipod.
    http://www.yamipod.com/main/modules/downloads/
    Make sure iTunes is closed before you use yamipod.
    Another issue I have heard about if are in Windows is a Parental Controls conflict with iTunes and your iPod trying to access the iTunes Server for the Restore Software Update.
    Make sure there are no firewalls blocking it if you are on a Mac.
    Try that, if not, post again.
    Max

  • HT5701 Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

    Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

    Open  > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
    If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion

  • My phone is in recovery mode after trying to install new release.  How can I get out of this?

    My iphone 4 is in recovery mode after trying to install update 7.1.1.  How can I get out of this with out having to do a restore?

    You don't. You have no choice but to restore at this point. The update did not complete successfully. iOS needs to be restored using iTunes.

  • I am running Windows365 and I can't get my laser jet 2015 to print. It is labeled as "offline".

    I am running Windows365 and I can't get my laser jet 2015 to print.  It is labeled as "offline".

    Hello there,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - LaserJet.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I lost my iphone 5 and it died. If i erased it in lost mode can i get my info on my phone and send it to another? or would it be lost? but if i find my phone can i recover it? can anyone even see the contents in my phone when its in lost mode?

    If i erased it in lost mode can i get my info on my phone and send it to another? or would it be lost? but if i find my phone can i recover it? can anyone even see the contents in my phone when its in lost mode?

    If you wiped it then the data is gone.
    your only hope would be to get a new iphone and restore any backups made of the old phone to the new one.

  • Can not get out of screensaver

    Hello,
    I have a Lenovo R500 with Windows 7. When i leave my computer on for a while without using it gets into a screensaver state where i can not get out of, only by restarting abruptly the computer and so all open programs that are still running. How can i solve this?
    Thanks!
    Johan

    Hi Johan1974,
    Here are a few more details:
     Open Device Manager by clicking the Start button Picture of the Start button, clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager.‌ Administrator permission required If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
          In the list of device categories, expand Mice and other pointing devices.
          Right-click the entry for your mouse, and then click Properties.
          In the Mouse Properties dialog box, click the Power Management tab, check the Allow this device to wake the computer check box, and then click OK.
    There are some screenshots here although the instructions are to remove the check because it is advising how to disable it. You will be doing the opposite.:
    Sleep Mode
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

Maybe you are looking for