F110 - RFFOUS_C

Hi All,
I have a requirement where i will run the transaction F110 and there i will enter the "run date" and "identification" and a check will get printed. Actually there is a sap standard program called RFFOUS_C that will get the check to be printed.
So can you tell in which all parameters i have to enter the values in F110 which will result in the check printing like check date , check no, amount , etc.
Will the transaction trigger the RFFOUS_C selection screen(the screen we get when we execute the same program)
Please help quickly . Its urgent.
Regards,
Vivek

@Suhas Saha
Thanks for this answer,
The question is still not answred.
In F110 tabs we can see call of 3 programs
- RFFOAVIS
- RFFOEDI1
- RFFOUS_C
In my application, program RFFOUS_C has been replaced by a specific Z_RFFOUS_C. That spécific program is alsow responsible on edition of paper forms (Initialy this operation is done by RFFOAVIS).
So i would like to understand how RFFOAVIS and RFFOEDI1 has been desabled.
Thats why i would like to understand/Find programs call in ABAP code of F110
Regards
Mercuryx

Similar Messages

  • DME file for RFFOUS_C

    hi,
    When the standard transaction F110 (rffous_c) is run for printing checks, does it create any DME file?
    Regrads,
    jaydip

    hi
    good
    F110 works in he following process.
    1. I have an ABAP program which is specifically designed for printing cheques or giros.
    2. In that program we create print cheque variants depending on which form we wish to print the cheque. You have to enter the variant name, beside the program name, on the "Printout/Data Medium" tab. Otherwise, your system will prompt you to do so when you click the "Printout" icon.
    3. Maintain the variant by clicking the "Maintain Variant" icon. Then check to see if housebank, acct id, cheque lot number and printer already match. Click "Print Immediately" if you wish to print the cheque, or unclick "Print Immediately" to print it later. Save your work.
    4. Click on the "Printout" icon, click "Start Immediately," and fill in the job name.
    5. The system will create spool request.
    6. If you choose to print the cheque later, you can preview your pre-printed cheque from SP02. You can also print, display, etc. from this t-code.
    thanks
    mrutyun^

  • RFFOUS_C (Cheque) Variants in F110

    Good Morning -
    This issue is in relation to the RFFOUS_C Program in, T-Code F110. I would like to know if SAP is limited to 40 (4 x 10 Columns) Variants per payment run (Screen number 205 & 206).
    Our Company has grown in recent years, we use SAP ECC 6.0 so we have created seperate Chq/Paym Variants for each Subsidiary (about 60-70 variants).
    At the moment we are restricted to 40 Variants in the Printout/Data Medium Tab (Further Selections Tab - Screen No. 206) in F110. There are 4 x 10 Columns of Variants (Field Names = VARI1 / /VARI2 / VARI3 & VARI4) 
    My question is can the number of columns/rows be increased to 5/6 columns of Variants, or by having additonal rows (more than 10) per column? If so please provide details and further instructions on how this can be done? Ideally we are not looking for a bespoke solution, if there is a SAP-Std fix, that would be ideal?
    The Closest OSS Note I could find in relation to the above issue = 328896 (logged in 2001), I believe we have a higher support pkg (Supp - 602)!
    Thanks in Advance.
    Regards
    Edited by: Imran Sirajudeen on Sep 18, 2008 4:05 PM

    Hello,
      We want to print all the checks with amounts > 25k first and then print all other check alphabetically. I am trying to understand Field Group AVIS in the program RFFOUS_C.
    Can anyone please help me understand ? Can I use AVIs field group to sort the check printing?
    Thanks for any Help in advance!

  • F110 Program RFFOUS_C Not Appearing

    Hi
    We have Maintain Z Classic Payment Medium Program ZRFFOUS_C for Payment Method C in FBZP.
    But it is Still Not Appear in F110 At Print out/ Data Medium Tab
    Manoj

    Hi,
    Please check this configuration steps in FBZP and check the payment method (C) in Bank determination .
    Payment Method in Country
    Desription: Check
    Pmt method for: Outgoing Payments
    Payment Method Clasification: Check
    Required Master Data: Address
    Doc type for payment : ZP
    Clearing doc type: ZV
    Pmt Medium program: RFFOUS_C (if you wnat to customize change accordingly)
    Currency config: None
    Note to payee: None
    Payment Method in Company Code
    Minimum amount: 1.00
    Maximum amount: 99999,999,999.00
    Foreign business partner allowed: yes
    Foreign currency allowed: yes
    Bank selection control: No optimization
    Form of payment medium: F110_IN_CHECK (if you want to customize change accordingly)
    Drawer: Give complete address
    Correspondence: K1
    Note to payee line items: None
    Payment Advice output: Always Payment advice
    Regards,
    Keerthi

  • Problem in F110 - Print Job - Program RFFOUS_C - Message Code FS 550

    we get a message code FS 550 which
    says "Check number status at beginning of processing" The next line in the
    payment log is "Program RFFOUS_C: No records selected".
    I have tried looking for the cause of this problem - I looked into the
    vendor master to check if the vendor has a payment block. There is no
    payment block in the Vendor master. I looked into the proposal to see if
    the document concerned was being selected. The proper document is being
    selected and infact the payment document too is being posted properly by
    the system. However, when one goes to the Printout option in the payment
    run, the system does not print out the check. It gives the messages which i
    mentioned above.
    Any ideas what could be wrong ??
    Would sincerely appreciate any assistance in resolving this issue.

    HI,
    Try to see if the check is register on FCHN transaction. So, you will be able to reprint the check using FHC7 transaction.
    Let me know your comments
    Daniel

  • How to restrict vendor open items to be picked to 45 during F110 process

    Hi experts,
    My client want to restrict vendor open items to be picked to 45 max during F110 payment run for each vendor.
    For example: If vendor " xyz" is having 60 open items at the time of payment run, it should allow max  to pick only 45 open items and generate one clearing document during payment run F110.
    Kindly give me any suggestions weather it is possible or not.
    Thanks & regards,
    Raghul

    hi ,
    Thanks for your quick reply.
    Actually we are using only payment method C- check.
    We have developed ZFORM and ZPROGRAM by copying standard form F110_PRENUM_CHCK  and std prog RFFOUS_C.
    In My ZFORM only single page is there with invoice details in main window ( upper side ) and check in the below page.
    when i had taken print on  pre printed stationary sample i came to know in main window at maximum 45 items details can be dispalyed in first page with  total amt check in below  for each vendor.
    Its works fine if each vendor has open items  below 45 during payment run.
    If any of the vendor is having more than 45 open items then 2 pages are printing.
    For ex: if vendor having 60 open items.
    For Ex : In first page 45 invoices details with  say total invoice amt 30,000 is printing check with same amt.
              in second page remaining 15 invoices with say total invoice amt of this 15 inovices is 5000 amt is printing check with 35,000 Instead of 5,000.
    We are not using void check concept here as my client dont want to waste checks.
    thansk & regards,
    Raghul.

  • F110 Issue

    Hi all , while running Automatic payment program im getting the following error
    *Company codes 7154/7154 do not appear in proposal 13.07.2011 INV1; correct
    Message no. FZ003
    Diagnosis
    No data exists for the specified paying company code 7154 and the specified sending company code 7154 in payment proposal 13.07.2011 INV1.
    System response
    The payment proposal cannot be edited.
    Procedure
    Check the flow trace and payment proposal list in order to determine why the specified company codes are not contained in the proposal.*
    But i check the vendor it is showing me that i=one open item is exist with id due from last 10 days
    LOG shows
    Job started
    Step 001 started (program SAPF110S, variant &0000000255001, user ID MPAL)
    Log for proposal run for payment on 13.07.2011, identification INV1
    End of log
    Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000131506, user ID MPAL)
    Step 003 started (program RFFOUS_C, variant &0000000006653, user ID MPAL)
    Program RFFOUS_C: No records selected
    Job finished

    Dear,
    You see this error message when there are no items to be picked up by automatic payment program
    And if you say that there is an open item for the vendor, check in Tcode f110, identification, open item will be there in some proposal list, you need to delete the proposal list and the parameters.
    hope it helps
    regards

  • Sorting F110 Printout by Vendor Line Items

    Folks,
    How can I sort the Payment prinouts from t-code F110 by Vendor and Line items.
    I tried looking at RFFORI01 but there is no place where I can sort and rearrange the
    items so that one page prinout will be printed first and multi page printouts later.
    I know I can copy RFFOUS_C to Z program and do changes but where to do
    the sorting logic.
    I tried looking at FBZP Transaction but in vain.
    Your help is appreciated

    Do not look at FBZP Transaction ,it is for configure print program and layout.
    GOTO SE38 ,copy print program to zprogram and do the modification.
    This program use Logical database - PYF
    sort  REGUP  by lifnr belnr buzei
    write the sort code after get regup in RFFOUS_C which is below of perform extract_vorbereitung.
    Once you done changes then configure the print program and layout in FBZP Transaction ( This will done by Functional guy ), now test it in F110 Transaction.
    Thanks
    Seshu

  • F110: Automatic payment supports the smartforms instead of script.?

    Dear All,
    I have a requirement on smartforms.
    I want to configure the smartform instead of script in F110 at company code level.
    Whether I need to do code changes on driver program RFFOUS_C, because this program supports only script.
    Please let me know how to do it?
    Thanks & Regards,
    Bala.

    Bala Kumar,
    SPRO => Automatic Outgoing Paymenst =>Payment Methods / Bank Selcetion for Payment Program => Set Up All Company Codes for Payment Transactions => Check for your Company Code => Go for Paying Company Code (Click It) => at the bottom you'll see Forms. Mention your form there.
    In case if you wish to use Driver Program RFFOUS_C, i think you should make a z copy and alter as per smartform.
    Anmol Saxena.

  • Invoice ref and item text not printing in check ( F110)

    Hi Experts,
    When i tried to print check using tcode F110 by following the procedure , i came to know in structure REGUP , invoice reference ( regup-rebzg) and item text ( regup-sgtxt) are not updating in REGUP . I checked this in debugger mode.
    Also reference number ( regup-xblnr ) is updated in structure ,but not displaying in output check format.
    Actually we are using ( ECC 6.0 ) zform and z print program zRFFOUS_C which are copied from std one and made some changes.
    Even I checked for standard FORM F110_PRENUM_CHCK and RFFOUS_C by changing
    in FBZP configuration level (assiging std form and std program ).
    In this also same issue as mentioned above in debugger mode.
    kindly give me any suggestions .
    My requirement is to print
    1. invoice reference ( rebzg)( instead of document number)
    2. reference number (xblnr )( same as your document )
    3 . item text ( sgtxt )
    4. amount ( wrbtr)
    Thanks & regards,
    Rahul

    Hi all,
    I too am facing the problem of missing document numbers and invoice text while using F-58 for printing cheques. I am using the standard program RFFOUS_C but have customized the scrip F110_PRENUM_CHCK. If anyone has a solution to this problem please suggest.
    Thanks,
    BP

  • Logical error in payment thru F110

    Hi,
    I have written a print program for check printing, when i make payment through f110 that is selecting all documents in the proposal for which i want to make the payment, it creates new payment doc no for each. Now when i print, it is considering each payment as a line item in my program. which actually should be printing in a different check altogehter in different page in the same spool.
    i have an internal table which contains all records for this payment and i am looping through it and applying some logic i call write statements and them close the form. In this case at new payment document no how should i print it in different page and not in a new spool.
    some one please help how can i modify the program ... m stuck now ... its working fine for all other payment tcodes but not for f110 as here multip-le payment doc no are generated for each doc ...

    Thanks for the replies ...
    But i think i was not clear ... If i select multiple documents for payment in f110 it creates a payment document number for each. In this case, i need to create a check for each in separate pages, which the RFFOUS_C program already does. But, now the same program should handle all partial payments also. But the standard program creates multiple line items for one partial payment using residual payment. But in my case as per the req. I have to bring everything in one line item.
    So I had customized the program to handle all this, but it works for same payment document number only. Here, now it prints multiple payment documents in the same check payment advice instead of different pages.
    I am not able to understand for every new payment document number, how can I print all the details of the second document in the next page.
    I have thought of a logic i need to implement it ... if any other ideas would be helpful.

  • Check no in reference field in F110

    Hello,
    Is there a way for when the checks are processed to have this automatically populated in reference field of payment document  in transaction F110.
    Or can we put manually in F110. But I did not find the reference field in F110 to key in.
    Regards,
    Tapan

    Hello!
    1. Please review the below note                                    
       30380  RFFOUS_C - Check number not stored in document           
       As per note 30380,                                              
       Point 5. As of Release 4.0C Report RFCHKU00 is delivered in the 
       standard system which copies the check number into a selected   
       reference field of the document. You can this program.
    2. Also review                                                
       213551     F110: Reference document not transferred        
       335893     F110:Fill ref. document no. of payment doc w/
    These two notes above mention another to way fill your requirements. But, note 213551 is a modification note and you should read the documentation about modification notes before trying the solution.
    REgards,
    REnan

  • Payment Advice and Check print - RFFOUS_C

    Hi All,
    Requirement is to print Payment Advice and check in same page and if multiple invoices then check in first
    page is voided and actual check is printed in last page at the end of Payment run (F110).
    RFFOUS_C is the program used to print both check and payment advice but currently this program print one invoice and check per page.
    (1) Is there any configuration available in FBZP to print multiple invoice in one page with check ?
    or
    (2) Is it feasible to customize RFFOUS_C program as this program generate check number per invoice and Data base update inside loop processing.
    Please suggest....any solutions.
    Thanks.

    Hi,
    I have same requirement.
    I want to print the payment advic and check for each vendor.
    For example, for vendor A if i have 10 invoice then it should print generate one payment document with 10 invoice document.
    and suppose i have two vendors  then it should generate the two payement document one for each vendor.
    can we control payement by each vendor?
    What confuguration i need to do for the same.
    Kindly help.
    Regards
    Sachin

  • F110- Check number and open item

    Good Morning SAP Guru's,
    A new one for me here that I need some help with-
    I executed F110 on our payment method 9 and I got a debit entry to offset the item and it moved them to cleared however I still have the item in open items as a credit.  Is this because I didn't print the check yet?  The debit entry has nothing in the reference field which would/should be the check number if printed. 
    What am I doing wrong?
    POINTS PROMISED

    hi,
    After running the Payment Run you have to do 1 more step
    Fo to Tcode Se38 and enter the RFFOUS_C and execute it.
    It will ask u abt the Program Run date and Identification Feature, pls fill all the required information and execute it.
    Pls note u must creat the Check lot number in Tcode FCHI.
    Assing points if this solution is works out......
    Ranjit

  • F110 message

    Hi,
    I made vendor posting f-43 and when I run F110 app run below message are generated
    Parameters have been entered
    Payment proposal has been created
    Payment run has been carried out
    and no clearing document generated.
    when I check Fbl1n it showing open item.
    What wud be possible error and what i need to do
    Regards,
    Krishna

    Hai Krishna,
    In FBZP  t.code check the all APP settings
    In Paying com. code maintain the Pmt advice form F110_IN_AVIS
    In Pmt method in country  Pmt medium program RFFOUS_C  and Doc type for Pmt and Clearing doc type check it once
    In Pmt method in com code maintain the pmt medium  F110_PRENUM_CHCK
    Assign Pmt method to our vendor in XK02
    Regards
    Madhu I

Maybe you are looking for