F4 help in select option

Hi All,
We have created a select option for a field of our database table. This field has a value range in its domain. For Example
Fix Val    Short Description
01           INR
02           US
03           EUR
When i press the f4 help of select option, am able to see both the number and the description in the F4 help. But when i select a value, it is only displaying the fixed value (01) in the select option field.
But i want the Short Description to be displayed instead of the fixed value.
Please tell me how to proceed.
Thanks in advance.

Hi,
When there are any values in the domain range it considers only the fixed values (keys)
to get the description what you can do is:
1.create a your own f4 help with the field description.
2.in the select options you can give the name of F4 help when you are populating the selection field.
wd_this->m_handle->add_selection_field(
                        i_description = 'Candidate Profit Center'
                        i_id = '/MRSS/T_RMOR_PROF_CENTER'
                         *i_value_help_type = if_wd_value_help_handler=>co_prefix_searchhelp*
                        *i_value_help_id = '/MRSS/SH_RM_PC_GROUP'*
                           it_result = lt_range_table
                        i_read_only = read_only ).
Priya

Similar Messages

How to created Freely Programmed F4 help in Select Options

hi,all
   I have a probelm about how to created a Freely Programmed F4 help in Select Options,and put help value into select options field
Thanks and Best Regards

Hi Haung,
You need to use FREE_HELP not the component name.
Modify you code as below:
   LT_RANGE_TABLE_V = wd_this->m_handler_V->create_range_table( 'ZCYPHDATE' ).
wd_this->M_HANDLER_V->add_selection_field(
      i_id                         = 'ZCYPHDATE'
      it_result                    = LT_RANGE_TABLE_V
      i_value_help_type            = if_wd_value_help_handler=>CO_PREFIX_APPLDEV
      i_value_help_id              = 'FREE_HELP'
      i_no_intervals               = abap_false ).
Hope this helps you.
Regards,
Rama

Can i assign a collective srch help for select option in list display

can i assign a collective srch help for select option in list display

Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva.

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

F4 help for select options based on parameter value

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

Freely Programed Help for select-option field

Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM

>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ?

Applying stadard search help to SELECT-OPTIONS

applying stadard search help to SELECT-OPTIONS
i have the below code in the selection screen:
SELECT-OPTIONS : so_stain FOR gv_stai1
                              MATCHCODE OBJECT ZSTA,
                 so_staex FOR gv_stai1
                              MATCHCODE OBJECT ZSTA.
where ZSTA is the search help defined in the data dictionary which is the copy on standard SAP search help..
but this is not working..:( when i run the program and click on the
F4 help for these two fields i get no out put..
can any one suggest me to search help to select-options..

Hi,
u can see this example code for f4 help on the select-option,
DATA: li_ret_tab TYPE STANDARD TABLE OF ddshretval,
        lws_retfield TYPE dfies-fieldname.
DATA : wa_ret_tab LIKE LINE OF li_ret_tab.
**- Get the device numbers
SELECT serge FROM equi
         INTO TABLE i_help1
         WHERE sparte EQ c_51.
IF sy-subrc EQ 0.
    lws_retfield = text-030.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield        = s_device
        dynpprog        = sy-repid
        dynpnr          = c_dynpnr
        dynprofield     = s_device
        value_org       = 'S'
      TABLES
        value_tab       = i_help1
      EXCEPTIONS
        parameter_error = 1
        no_values_found = 2
        OTHERS          = 3.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
Regards,
kk.

Problem on Search Help for select-option

Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!

Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
   based upon
   MULTIPLE Selection,
   selected by the user,
   in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynprofield     = 'BUKRS'
      dynpprog        = sy-REPID
      dynpnr          = sy-dynnr
      multiple_choice = 'X'
      value_org       = 'S'
    TABLES
      value_tab       = ITAB
      return_tab      = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
    BUKRS-SIGN = 'I'.
    BUKRS-OPTION = 'EQ'.
    BUKRS-LOW = RETURN-FIELDVAL.
    BUKRS-HIGH = RETURN-FIELDVAL.
    APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m.

OVS Help in Select Options-Text to be Shown and Code to be captured

Hello Experts,
I am using Select options in web dynpro abap.
On a particular View container i have added a selection field using ADD_SELECTION_FIELD which has an OVS help to it.
The selection field is of type CODE.
And on click of a button i am reading the select option fields using GET_RANGE_TABLE_OF_SEL_FIELD and assigining this to a
field symbol which inturn is being set to an attribute.
My requirement is to show the TEXT to the user and send the CODE to the method which is called
when the button is clicked and a table is populated.
Normally we can keep two attributes one for TEXT and the other for CODE but for Select options i am not very sure how this can be achieved.
Because in select options we are reading the values present on the select option field and there may be multiple values.
Please guide me through this.
Thanks in Advance,
Shravan

Hello Shravan,
This can be easily achieved if you convert the selection field to dropdown.
Create a valueset containing the list of valid values and then pass this to the ADD_SELECTION_FIELD method
"Creating valueset
DATA lt_valueset TYPE wdy_key_value_table.
DATA ls_valueset LIKE LINE OF lt_valueset.
ls_valueset-key = 'EN'.
ls_valueset-value = 'English'.
APPEND ls_valueset TO lt_valueset.
"Creating selection field as Dropdown
lr_helper->add_selection_field( i_id = <ID>
                                                   it_result = lt_range
                                                   i_as_dropdown = abap_true
                                                  it_value_set = lt_valueset ).
BR, Saravanan

Help on select options.

Hi gurus!!
I have a report where in i am putting the values in select-options. but yj eproblem i have is when i am not putting any values i am getting the correct output.
but with the same data i am putting the values in low or high i am not getting any data..
so i think i need to put all the entrioes of the select option in an internal table or ranges i dont know and then we give some code like
ranges : ra_stotal for ztsd120-zlow.
ra_stotal-sign = 'I'.
ra_stotal-option = 'BT'.
ra_stotal-low = zlow-low.
ra_stotal-high = zlow-high.
append ra_stotal.
clear ra_stotal.
Can anyone tell me if this is what i got to do if so how?
or is there some other way out?

Hi Mona,
Please check the below code in BOLD letter....
I guess you are having a problem in SELECT-OPTIONS because ...might be u r using EQ in where condition of your select query. Whenever u r using SELECT-OPTIONS, it should be "IN" in the where condition.
Eg:- SELECT <field names>
           FROM MARA
           INTO TABLE <it_tablename>
          WHERE matnr IN s_matnr.
Reward points for helpful answers.
Regards,
HK.

Serach help in Select-option in WD ABAP

Hi Folks,
I am using WDR_SELECT_OPTIONS reusable component in my Component. I want to attach customized search help particular fild while creating select-option using
wd_this->m_handler->add_selection_field(
             i_id        = 'IWERK'
             it_result   = lt_range_table
             i_read_only = read_only ).
Can anyone explian how can I attach search help here.
Regards,
Vishal.

Hi Vishal,
If its a search help, use the following code:
lt_range_table = wd_this->m_handler->create_range_table( i_typename = 'S_PLANETYE' ).
wd_this->m_handler->add_selection_field(
i_id = 'S_PLANETYE'
it_result = lt_range_table
i_read_only = read_only
I_VALUE_HELP_TYPE = 'SEARCHHELP'
i_value_help_id = 'Z_SAPLANE' ).
In this example, 'Z_SAPLANE' is the dictionary search help.
This will solve your problem
For further details, goto interface IF_WD_VALUE_HELP_HANDLER to get a list of values you can supply to parameter I_VALUE_HELP_TYPE.
This is similar to what you do with a context, similar to the options you get in the dropdown for Input Help property.
Regards,
Chitrali

Personalised Value Help in Select-Option field WD ABAP

Hi
I would like to know how I could provide the user with generic value help. I am using the Select Options in a Web Dynpro(ABAP) Application.
Regards
Faaiez

Hi
The key word here is "generic value help". This means the values that I want to fill the drop down with changes all the time based on various criteria. I need to fill the help values within the ABAP code based on the values in internal tables.
Regards
Faaiez

F4 Help for select-options.

Hi Experts,
I need to use F4 help for a select - options field from a particular table.I have written the below code and it worked well.
FORM sub_show_help.
SELECT bukrs
   FROM zfica_accurate
    INTO TABLE gt_accurate.
    delete ADJACENT DUPLICATES FROM gt_accurate.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'S_CMCODE'
      window_title    = 'COMPANY CODE'
      value_org       = 'S'
      multiple_choice = 'X'
    TABLES
      value_tab       = gt_accurate
      return_tab      = gt_return.
s_cmcode-sign    = 'I'.
s_cmcode-option = 'EQ'.
LOOP AT gt_return INTO gw_return .
    s_cmcode-low = gw_return-fieldval.
    APPEND s_cmcode.
ENDLOOP.
READ TABLE s_cmcode INDEX 1.
IF sy-subrc = 0.
    gw_dynpread-fieldname = text-018.
    gw_dynpread-fieldvalue = s_cmcode-low.
    APPEND gw_dynpread TO gt_dynpread.
UPDATE THE SCREEN FIELD VALUES
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = sy-repid
        dynumb               = sy-dynnr
      TABLES
        dynpfields           = gt_dynpread
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
ENDIF.
IF sy-subrc <> 0.
    MESSAGE i003.
ENDIF.
The problem is , I need to create a new type for s_cmcode(select-option ) field with the same structure as the select-option and the code is as below. I have created an internal table gt_sfield similar to s_cmcode . I have replaced s_cmcode with gt_sfield but the below code is not working. Its the same as the above program but its not showing up the values in the field.Could anyone please help me.
fORM SUB_SHOW_HELP.
SELECT BUKRS
   FROM ZFICA_ACCURATE
    INTO TABLE GT_ACCURATE.
gt_sfield[] = s_cmcode[].
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD        = 'BUKRS'
      DYNPPROG        = SY-REPID
      DYNPNR          = SY-DYNNR
      WINDOW_TITLE    = 'COMPANY CODE'
      VALUE_ORG       = 'S'
      MULTIPLE_CHOICE = 'X'
    TABLES
      VALUE_TAB       = GT_ACCURATE
      RETURN_TAB      = GT_RETURN.
LOOP AT GT_RETURN INTO gw_return.
      gw_sfield-SIGN    = 'I'.
      gw_sfield-OPTION = 'EQ'.
    MOve gw_return-fieldval to gw_sfield-low.
    APPEND gw_sfield to gt_sfield.
ENDLOOP.
READ TABLE gt_sfield INDEX 1 INTO gw_sfield .
IF SY-SUBRC = 0.
    gw_dynpread-fieldname = 'S_CMCODE'.
    move gw_sfield-low to gw_dynpread-fieldvalue.
    APPEND GW_DYNPREAD TO GT_DYNPREAD.
UPDATE THE SCREEN FIELD VALUES
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        DYNAME               = SY-REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = GT_DYNPREAD
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 1
        INVALID_DYNPROFIELD = 2
        INVALID_DYNPRONAME   = 3
        INVALID_DYNPRONUMMER = 4
        INVALID_REQUEST      = 5
        NO_FIELDDESCRIPTION = 6
        UNDEFIND_ERROR       = 7
        OTHERS               = 8.
ENDIF.
IF SY-SUBRC <> 0.
    MESSAGE I003.
ENDIF.
ENDFORM.

Hi,
The fucntion module 'DYNP_VALUES_UPDATE' should be used only for updating the screen field values. In your case you are updating the internal table using this function module.
Thanks
Pavan

Search Help in Select - Options for Time field

Hi,
I have a select option which is a time field.
For date field the F4 help is automatically generated.
How to get F4 help for time field.
Regards,
Remo

Selection-Options or normal field - it doesn't matter. There is no system delivered value help for a time field. This is documented in the online help:
There is no automatic F4 help for data element TIMS.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
You would have to create your freely programmed value help if you want something like the time value help available in the SAPGUI.

Value help for select-option not filling selection field

I'm having some problems with a value help on a select-option. I've managed to get the value help displaying the correct values but for some reason can't get it to populate the selection field after I've selected a record.
I have the following call:
wd_this->m_handler->add_selection_field(
                      i_id = 'SHORT_D'
                      i_description = 'Program'
                      it_result = lt_range_table
                      i_read_only = read_only
                      i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_SEARCHHELP
                      i_value_help_id = 'ZPROGSTUDY' ).
where ZPROGSTUDY is a new search help I've set up with an exit to retrieve the values.
Any ideas ? Thanks.

Hi Malcolm,
The code you have is OK. I copied your code into a test program and it worked as expected.
I used a search help where the possible values are populated in the search help exit, exactly as in your case. The only time it did not work was when read_only = X, but that is obvious also from a visual point of view since the input field is greyed out in that case. The popup also tells you is in RO mode...
Does your SHLP work when you test it from SE11? Returns values?
SAP provides a lot of WD4A sample code, see for example component WDR_TEST_SELECT_OPTIONS look for
select-option fields > special cases > input helps > Non field-specific input help using search help
Regards,
George

F4 help in select option

Similar Messages

Maybe you are looking for